libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/gd32450z-eval/Libraries/GD32F4xx_standard_peripheral/Source/gd32f4xx_exti.c

230 lines
6.4 KiB
C
Raw Blame History

/*!
\file gd32f4xx_exti.c
\brief EXTI driver
*/
/*
Copyright (C) 2016 GigaDevice
2016-08-15, V1.0.0, firmware for GD32F4xx
*/
#include "gd32f4xx_exti.h"
/*!
\brief deinitialize the EXTI
\param[in] none
\param[out] none
\retval none
*/
void exti_deinit(void)
{
/* reset the value of all the EXTI registers */
EXTI_INTEN = (uint32_t)0x00000000U;
EXTI_EVEN = (uint32_t)0x00000000U;
EXTI_RTEN = (uint32_t)0x00000000U;
EXTI_FTEN = (uint32_t)0x00000000U;
EXTI_SWIEV = (uint32_t)0x00000000U;
}
/*!
\brief initialize the EXTI
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[in] mode: interrupt or event mode, refer to exti_mode_enum
only one parameter can be selected which is shown as below:
\arg EXTI_INTERRUPT: interrupt mode
\arg EXTI_EVENT: event mode
\param[in] trig_type: interrupt trigger type, refer to exti_trig_type_enum
only one parameter can be selected which is shown as below:
\arg EXTI_TRIG_RISING: rising edge trigger
\arg EXTI_TRIG_FALLING: falling trigger
\arg EXTI_TRIG_BOTH: rising and falling trigger
\param[out] none
\retval none
*/
void exti_init(exti_line_enum linex, \
exti_mode_enum mode, \
exti_trig_type_enum trig_type)
{
/* reset the EXTI line x */
EXTI_INTEN &= ~(uint32_t)linex;
EXTI_EVEN &= ~(uint32_t)linex;
EXTI_RTEN &= ~(uint32_t)linex;
EXTI_FTEN &= ~(uint32_t)linex;
/* set the EXTI mode and enable the interrupts or events from EXTI line x */
switch(mode){
case EXTI_INTERRUPT:
EXTI_INTEN |= (uint32_t)linex;
break;
case EXTI_EVENT:
EXTI_EVEN |= (uint32_t)linex;
break;
default:
break;
}
/* set the EXTI trigger type */
switch(trig_type){
case EXTI_TRIG_RISING:
EXTI_RTEN |= (uint32_t)linex;
EXTI_FTEN &= ~(uint32_t)linex;
break;
case EXTI_TRIG_FALLING:
EXTI_RTEN &= ~(uint32_t)linex;
EXTI_FTEN |= (uint32_t)linex;
break;
case EXTI_TRIG_BOTH:
EXTI_RTEN |= (uint32_t)linex;
EXTI_FTEN |= (uint32_t)linex;
break;
default:
break;
}
}
/*!
\brief enable the interrupts from EXTI line x
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval none
*/
void exti_interrupt_enable(exti_line_enum linex)
{
EXTI_INTEN |= (uint32_t)linex;
}
/*!
\brief enable the events from EXTI line x
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval none
*/
void exti_event_enable(exti_line_enum linex)
{
EXTI_EVEN |= (uint32_t)linex;
}
/*!
\brief disable the interrupt from EXTI line x
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval none
*/
void exti_interrupt_disable(exti_line_enum linex)
{
EXTI_INTEN &= ~(uint32_t)linex;
}
/*!
\brief disable the events from EXTI line x
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval none
*/
void exti_event_disable(exti_line_enum linex)
{
EXTI_EVEN &= ~(uint32_t)linex;
}
/*!
\brief get EXTI lines flag
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval FlagStatus: status of flag (RESET or SET)
*/
FlagStatus exti_flag_get(exti_line_enum linex)
{
if(RESET != (EXTI_PD & (uint32_t)linex)){
return SET;
}else{
return RESET;
}
}
/*!
\brief clear EXTI lines pending flag
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval none
*/
void exti_flag_clear(exti_line_enum linex)
{
EXTI_PD = (uint32_t)linex;
}
/*!
\brief get EXTI lines flag when the interrupt flag is set
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval FlagStatus: status of flag (RESET or SET)
*/
FlagStatus exti_interrupt_flag_get(exti_line_enum linex)
{
uint32_t flag_left, flag_right;
flag_left = EXTI_PD & (uint32_t)linex;
flag_right = EXTI_INTEN & (uint32_t)linex;
if((RESET != flag_left) && (RESET != flag_right)){
return SET;
}else{
return RESET;
}
}
/*!
\brief clear EXTI lines pending flag
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval none
*/
void exti_interrupt_flag_clear(exti_line_enum linex)
{
EXTI_PD = (uint32_t)linex;
}
/*!
\brief enable EXTI software interrupt event
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval none
*/
void exti_software_interrupt_enable(exti_line_enum linex)
{
EXTI_SWIEV |= (uint32_t)linex;
}
/*!
\brief disable EXTI software interrupt event
\param[in] linex: EXTI line number, refer to exti_line_enum
only one parameter can be selected which is shown as below:
\arg EXTI_x (x=0..22): EXTI line x
\param[out] none
\retval none
*/
void exti_software_interrupt_disable(exti_line_enum linex)
{
EXTI_SWIEV &= ~(uint32_t)linex;
}
View Git Blame Copy Permalink