rt-thread-official/bsp/lpc54114-lite/Libraries/devices/LPC54114/project_template/board.h

148 lines
6.5 KiB
C

/*
* The Clear BSD License
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
#include "clock_config.h"
#include "fsl_common.h"
#include "fsl_gpio.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "LPCXPRESSO54114"
#define BOARD_EXTCLKINRATE (0)
/*! @brief The UART to use for debug messages. */
#define BOARD_DEBUG_UART_TYPE DEBUG_CONSOLE_DEVICE_TYPE_FLEXCOMM
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0
#define BOARD_DEBUG_UART_INSTANCE 0U
#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetFreq(kCLOCK_Flexcomm0)
#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0
#define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn
#define BOARD_DEBUG_SPI_CLK_FREQ 12000000
#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE 115200
#endif /* BOARD_DEBUG_UART_BAUDRATE */
#ifndef BOARD_LED_RED_GPIO
#define BOARD_LED_RED_GPIO GPIO
#endif
#define BOARD_LED_RED_GPIO_PORT 0U
#ifndef BOARD_LED_RED_GPIO_PIN
#define BOARD_LED_RED_GPIO_PIN 29U
#endif
#ifndef BOARD_LED_GREEN_GPIO
#define BOARD_LED_GREEN_GPIO GPIO
#endif
#define BOARD_LED_GREEN_GPIO_PORT 1U
#ifndef BOARD_LED_GREEN_GPIO_PIN
#define BOARD_LED_GREEN_GPIO_PIN 10U
#endif
#ifndef BOARD_LED_BLUE_GPIO
#define BOARD_LED_BLUE_GPIO GPIO
#endif
#define BOARD_LED_BLUE_GPIO_PORT 1U
#ifndef BOARD_LED_BLUE_GPIO_PIN
#define BOARD_LED_BLUE_GPIO_PIN 9U
#endif
/* Board led color mapping */
#define LOGIC_LED_ON 0U
#define LOGIC_LED_OFF 1U
#define LED_RED_INIT(output) \
GPIO_PinInit(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_RED */
#define LED_RED_ON() \
GPIO_PortClear(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED_RED */
#define LED_RED_OFF() \
GPIO_PortSet(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED_RED */
#define LED_RED_TOGGLE() \
GPIO_PortToggle(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED */
#define LED_GREEN_INIT(output) \
GPIO_PinInit(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_GREEN */
#define LED_GREEN_ON() \
GPIO_PortClear(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN */
#define LED_GREEN_OFF() \
GPIO_PortSet(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN */
#define LED_GREEN_TOGGLE() \
GPIO_PortToggle(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */
#define LED_BLUE_INIT(output) \
GPIO_PinInit(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_BLUE */
#define LED_BLUE_ON() \
GPIO_PortClear(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED_BLUE */
#define LED_BLUE_OFF() \
GPIO_PortSet(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED_BLUE */
#define LED_BLUE_TOGGLE() \
GPIO_PortToggle(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*******************************************************************************
* API
******************************************************************************/
status_t BOARD_InitDebugConsole(void);
#ifdef SDK_PRIMARY_CORE
void BOARD_StartSecondaryCore(void);
#endif
#if defined(__cplusplus)
}
#endif /* __cplusplus */
#endif /* _BOARD_H_ */