230 lines
6.3 KiB
C
230 lines
6.3 KiB
C
/**************************************************************************//**
|
|
*
|
|
* @copyright (C) 2020 Nuvoton Technology Corp. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2020-12-12 Wayne First version
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include <rtconfig.h>
|
|
|
|
#if (defined(BSP_USING_SOFT_I2C) && defined(RT_USING_I2C_BITOPS) && defined(RT_USING_I2C) && defined(RT_USING_PIN))
|
|
|
|
#include <rtthread.h>
|
|
#include <rthw.h>
|
|
#include <rtdevice.h>
|
|
#include "NuMicro.h"
|
|
#include "drv_sys.h"
|
|
|
|
/* Private define ---------------------------------------------------------------*/
|
|
#define LOG_TAG "drv.softi2c"
|
|
#define DBG_ENABLE
|
|
#define DBG_SECTION_NAME LOG_TAG
|
|
#define DBG_LEVEL DBG_INFO
|
|
#include <rtdbg.h>
|
|
|
|
#ifdef BSP_USING_SOFT_I2C0
|
|
#define NU_SOFT_I2C0_BUS_CONFIG \
|
|
{ \
|
|
.scl = BSP_SOFT_I2C0_SCL_PIN, \
|
|
.sda = BSP_SOFT_I2C0_SDA_PIN, \
|
|
.bus_name = "softi2c0", \
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_SOFT_I2C1
|
|
#define NU_SOFT_I2C1_BUS_CONFIG \
|
|
{ \
|
|
.scl = BSP_SOFT_I2C1_SCL_PIN, \
|
|
.sda = BSP_SOFT_I2C1_SDA_PIN, \
|
|
.bus_name = "softi2c1", \
|
|
}
|
|
#endif
|
|
|
|
#if (!defined(BSP_USING_SOFT_I2C0) && !defined(BSP_USING_SOFT_I2C1))
|
|
#error "Please define at least one BSP_USING_SOFT_I2Cx"
|
|
/* this driver can be disabled at menuconfig ? RT-Thread Components ? Device Drivers */
|
|
#endif
|
|
|
|
/* Private typedef --------------------------------------------------------------*/
|
|
/* soft i2c config class */
|
|
struct nu_soft_i2c_config
|
|
{
|
|
rt_uint8_t scl;
|
|
rt_uint8_t sda;
|
|
const char *bus_name;
|
|
};
|
|
/* soft i2c driver class */
|
|
struct nu_soft_i2c
|
|
{
|
|
struct rt_i2c_bit_ops ops;
|
|
struct rt_i2c_bus_device soft_i2c_bus;
|
|
};
|
|
|
|
/* Private functions ------------------------------------------------------------*/
|
|
static void nu_soft_i2c_udelay(rt_uint32_t us);
|
|
static void nu_soft_i2c_set_sda(void *data, rt_int32_t state);
|
|
static void nu_soft_i2c_set_scl(void *data, rt_int32_t state);
|
|
static rt_int32_t nu_soft_i2c_get_sda(void *data);
|
|
static rt_int32_t nu_soft_i2c_get_scl(void *data);
|
|
|
|
/* Private variables ------------------------------------------------------------*/
|
|
static const struct nu_soft_i2c_config nu_soft_i2c_cfg[] =
|
|
{
|
|
#ifdef BSP_USING_SOFT_I2C0
|
|
NU_SOFT_I2C0_BUS_CONFIG,
|
|
#endif
|
|
#ifdef BSP_USING_SOFT_I2C1
|
|
NU_SOFT_I2C1_BUS_CONFIG,
|
|
#endif
|
|
};
|
|
|
|
static struct nu_soft_i2c nu_soft_i2c_obj[sizeof(nu_soft_i2c_cfg) / sizeof(nu_soft_i2c_cfg[0])];
|
|
|
|
static const struct rt_i2c_bit_ops nu_soft_i2c_bit_ops =
|
|
{
|
|
.data = RT_NULL,
|
|
.set_sda = nu_soft_i2c_set_sda,
|
|
.set_scl = nu_soft_i2c_set_scl,
|
|
.get_sda = nu_soft_i2c_get_sda,
|
|
.get_scl = nu_soft_i2c_get_scl,
|
|
.udelay = nu_soft_i2c_udelay,
|
|
.delay_us = 1,
|
|
.timeout = 100
|
|
};
|
|
|
|
/* Functions define ------------------------------------------------------------*/
|
|
|
|
/**
|
|
* The time delay function.
|
|
*
|
|
* @param microseconds.
|
|
*/
|
|
static void nu_soft_i2c_udelay(rt_uint32_t us)
|
|
{
|
|
rt_hw_us_delay(us);
|
|
}
|
|
|
|
/**
|
|
* This function initializes the soft i2c pin.
|
|
*
|
|
* @param soft i2c config class.
|
|
*/
|
|
static void nu_soft_i2c_gpio_init(const struct nu_soft_i2c_config *cfg)
|
|
{
|
|
rt_pin_mode(cfg->scl, PIN_MODE_OUTPUT_OD);
|
|
rt_pin_mode(cfg->sda, PIN_MODE_OUTPUT_OD);
|
|
|
|
rt_pin_write(cfg->scl, PIN_HIGH);
|
|
rt_pin_write(cfg->sda, PIN_HIGH);
|
|
}
|
|
|
|
/**
|
|
* if i2c is locked, this function will unlock it
|
|
*
|
|
* @param soft i2c config class
|
|
*
|
|
* @return RT_EOK indicates successful unlock.
|
|
*/
|
|
static rt_err_t nu_soft_i2c_bus_unlock(const struct nu_soft_i2c_config *cfg)
|
|
{
|
|
rt_int32_t i = 0;
|
|
|
|
if (PIN_LOW == rt_pin_read(cfg->sda))
|
|
{
|
|
while (i++ < 9)
|
|
{
|
|
rt_pin_write(cfg->scl, PIN_HIGH);
|
|
nu_soft_i2c_udelay(100);
|
|
rt_pin_write(cfg->scl, PIN_LOW);
|
|
nu_soft_i2c_udelay(100);
|
|
}
|
|
}
|
|
if (PIN_LOW == rt_pin_read(cfg->sda))
|
|
{
|
|
return -RT_ERROR;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/**
|
|
* This function sets the sda pin.
|
|
*
|
|
* @param soft i2c config class.
|
|
* @param The sda pin state.
|
|
*/
|
|
static void nu_soft_i2c_set_sda(void *data, rt_int32_t state)
|
|
{
|
|
struct nu_soft_i2c_config *cfg = (struct nu_soft_i2c_config *)data;
|
|
|
|
rt_pin_write(cfg->sda, state ? PIN_HIGH : PIN_LOW);
|
|
}
|
|
|
|
/**
|
|
* This function sets the scl pin.
|
|
*
|
|
* @param soft i2c config class.
|
|
* @param The scl pin state.
|
|
*/
|
|
static void nu_soft_i2c_set_scl(void *data, rt_int32_t state)
|
|
{
|
|
struct nu_soft_i2c_config *cfg = (struct nu_soft_i2c_config *)data;
|
|
|
|
rt_pin_write(cfg->scl, state ? PIN_HIGH : PIN_LOW);
|
|
}
|
|
|
|
/**
|
|
* This function gets the sda pin state.
|
|
*
|
|
* @param The sda pin state.
|
|
*/
|
|
static rt_int32_t nu_soft_i2c_get_sda(void *data)
|
|
{
|
|
struct nu_soft_i2c_config *cfg = (struct nu_soft_i2c_config *)data;
|
|
return rt_pin_read(cfg->sda);
|
|
}
|
|
|
|
/**
|
|
* This function gets the scl pin state.
|
|
*
|
|
* @param The scl pin state.
|
|
*/
|
|
static rt_int32_t nu_soft_i2c_get_scl(void *data)
|
|
{
|
|
struct nu_soft_i2c_config *cfg = (struct nu_soft_i2c_config *)data;
|
|
return rt_pin_read(cfg->scl);
|
|
}
|
|
|
|
/* Soft I2C initialization function */
|
|
int rt_soft_i2c_init(void)
|
|
{
|
|
rt_size_t obj_num = sizeof(nu_soft_i2c_obj) / sizeof(struct nu_soft_i2c);
|
|
rt_err_t result;
|
|
|
|
for (int i = 0; i < obj_num; i++)
|
|
{
|
|
nu_soft_i2c_obj[i].ops = nu_soft_i2c_bit_ops;
|
|
nu_soft_i2c_obj[i].ops.data = (void *)&nu_soft_i2c_cfg[i];
|
|
nu_soft_i2c_obj[i].soft_i2c_bus.priv = &nu_soft_i2c_obj[i].ops;
|
|
nu_soft_i2c_gpio_init(&nu_soft_i2c_cfg[i]);
|
|
result = rt_i2c_bit_add_bus(&nu_soft_i2c_obj[i].soft_i2c_bus, nu_soft_i2c_cfg[i].bus_name);
|
|
RT_ASSERT(result == RT_EOK);
|
|
nu_soft_i2c_bus_unlock(&nu_soft_i2c_cfg[i]);
|
|
|
|
LOG_D("software simulation %s init done, pin scl: %d, pin sda %d",
|
|
nu_soft_i2c_cfg[i].bus_name,
|
|
nu_soft_i2c_cfg[i].scl,
|
|
nu_soft_i2c_cfg[i].sda);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
INIT_DEVICE_EXPORT(rt_soft_i2c_init);
|
|
|
|
#endif //#if (defined(BSP_USING_SOFT_I2C) && defined(RT_USING_I2C_BITOPS) && defined(RT_USING_I2C) && defined(RT_USING_PIN))
|