494 lines
12 KiB
C
494 lines
12 KiB
C
/*
|
|
* Copyright (c) 2006-2024, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2023/06/25 flyingcys first version
|
|
*/
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
|
|
#include "board.h"
|
|
#include "drv_uart.h"
|
|
#include "drv_pinmux.h"
|
|
|
|
#define DBG_TAG "DRV.UART"
|
|
#define DBG_LVL DBG_WARNING
|
|
#include <rtdbg.h>
|
|
|
|
/*
|
|
* Divide positive or negative dividend by positive divisor and round
|
|
* to closest integer. Result is undefined for negative divisors and
|
|
* for negative dividends if the divisor variable type is unsigned.
|
|
*/
|
|
#define DIV_ROUND_CLOSEST(x, divisor)( \
|
|
{ \
|
|
typeof(x) __x = x; \
|
|
typeof(divisor) __d = divisor; \
|
|
(((typeof(x))-1) > 0 || \
|
|
((typeof(divisor))-1) > 0 || (__x) > 0) ? \
|
|
(((__x) + ((__d) / 2)) / (__d)) : \
|
|
(((__x) - ((__d) / 2)) / (__d)); \
|
|
} \
|
|
)
|
|
|
|
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
|
|
|
|
struct hw_uart_device
|
|
{
|
|
rt_ubase_t hw_base;
|
|
rt_uint32_t irqno;
|
|
};
|
|
|
|
#define BSP_DEFINE_UART_DEVICE(no) \
|
|
static struct hw_uart_device _uart##no##_device = \
|
|
{ \
|
|
UART##no##_BASE, \
|
|
UART##no##_IRQ \
|
|
}; \
|
|
static struct rt_serial_device _serial##no;
|
|
|
|
#ifdef BSP_USING_UART0
|
|
BSP_DEFINE_UART_DEVICE(0);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
BSP_DEFINE_UART_DEVICE(1);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
BSP_DEFINE_UART_DEVICE(2);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART3
|
|
BSP_DEFINE_UART_DEVICE(3);
|
|
#endif
|
|
|
|
rt_inline rt_uint32_t dw8250_read32(rt_ubase_t addr, rt_ubase_t offset)
|
|
{
|
|
return *((volatile rt_uint32_t *)(addr + (offset << UART_REG_SHIFT)));
|
|
}
|
|
|
|
rt_inline void dw8250_write32(rt_ubase_t addr, rt_ubase_t offset, rt_uint32_t value)
|
|
{
|
|
*((volatile rt_uint32_t *)(addr + (offset << UART_REG_SHIFT))) = value;
|
|
|
|
if (offset == UART_LCR)
|
|
{
|
|
int tries = 1000;
|
|
|
|
/* Make sure LCR write wasn't ignored */
|
|
while (tries--)
|
|
{
|
|
unsigned int lcr = dw8250_read32(addr, UART_LCR);
|
|
|
|
if ((value & ~UART_LCR_STKP) == (lcr & ~UART_LCR_STKP))
|
|
{
|
|
return;
|
|
}
|
|
|
|
dw8250_write32(addr, UART_FCR, UART_FCR_DEFVAL);
|
|
dw8250_read32(addr, UART_RX);
|
|
|
|
*((volatile rt_uint32_t *)(addr + (offset << UART_REG_SHIFT))) = value;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dw8250_uart_setbrg(rt_ubase_t addr, int baud_divisor)
|
|
{
|
|
/* to keep serial format, read lcr before writing BKSE */
|
|
int lcr_val = dw8250_read32(addr, UART_LCR) & ~UART_LCR_BKSE;
|
|
|
|
dw8250_write32(addr, UART_LCR, UART_LCR_BKSE | lcr_val);
|
|
dw8250_write32(addr, UART_DLL, baud_divisor & 0xff);
|
|
|
|
dw8250_write32(addr, UART_DLM, (baud_divisor >> 8) & 0xff);
|
|
dw8250_write32(addr, UART_LCR, lcr_val);
|
|
}
|
|
|
|
static rt_err_t dw8250_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
rt_base_t base;
|
|
struct hw_uart_device *uart;
|
|
int clock_divisor;
|
|
int last_ier_state;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
base = uart->hw_base;
|
|
|
|
while (!(dw8250_read32(base, UART_LSR) & UART_LSR_TEMT));
|
|
|
|
last_ier_state = dw8250_read32(base, UART_IER);
|
|
dw8250_write32(base, UART_IER, 0);
|
|
dw8250_write32(base, UART_MCR, UART_MCRVAL);
|
|
dw8250_write32(base, UART_FCR, UART_FCR_DEFVAL);
|
|
|
|
/* initialize serial config to 8N1 before writing baudrate */
|
|
dw8250_write32(base, UART_LCR, UART_LCR_8N1);
|
|
|
|
clock_divisor = DIV_ROUND_CLOSEST(UART_INPUT_CLK, 16 * serial->config.baud_rate);
|
|
dw8250_uart_setbrg(base, clock_divisor);
|
|
|
|
dw8250_write32(base, UART_IER, last_ier_state);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t dw8250_uart_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct hw_uart_device *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* Disable rx irq */
|
|
dw8250_write32(uart->hw_base, UART_IER, !UART_IER_RDI);
|
|
rt_hw_interrupt_mask(uart->irqno);
|
|
break;
|
|
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* Enable rx irq */
|
|
dw8250_write32(uart->hw_base, UART_IER, UART_IER_RDI);
|
|
rt_hw_interrupt_umask(uart->irqno);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int dw8250_uart_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
rt_base_t base;
|
|
struct hw_uart_device *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
base = uart->hw_base;
|
|
|
|
while ((dw8250_read32(base, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY);
|
|
|
|
dw8250_write32(base, UART_TX, c);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int dw8250_uart_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch = -1;
|
|
rt_base_t base;
|
|
struct hw_uart_device *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
base = uart->hw_base;
|
|
|
|
if (dw8250_read32(base, UART_LSR) & UART_LSR_DR)
|
|
{
|
|
ch = dw8250_read32(base, UART_RX) & 0xff;
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops _uart_ops =
|
|
{
|
|
dw8250_uart_configure,
|
|
dw8250_uart_control,
|
|
dw8250_uart_putc,
|
|
dw8250_uart_getc,
|
|
};
|
|
|
|
static void rt_hw_uart_isr(int irqno, void *param)
|
|
{
|
|
unsigned int iir, status;
|
|
struct rt_serial_device *serial = (struct rt_serial_device *)param;
|
|
struct hw_uart_device *uart = (struct hw_uart_device *)serial->parent.user_data;
|
|
|
|
iir = dw8250_read32(uart->hw_base, UART_IIR);
|
|
|
|
/* If don't do this in non-DMA mode then the "RX TIMEOUT" interrupt will fire forever. */
|
|
if ((iir & 0x3f) == UART_IIR_RX_TIMEOUT)
|
|
{
|
|
status = dw8250_read32(uart->hw_base, UART_LSR);
|
|
|
|
if (!(status & (UART_LSR_DR | UART_LSR_BI)))
|
|
{
|
|
dw8250_read32(uart->hw_base, UART_RX);
|
|
}
|
|
}
|
|
|
|
if (!(iir & UART_IIR_NO_INT))
|
|
{
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY)
|
|
{
|
|
/* Clear the USR */
|
|
dw8250_read32(uart->hw_base, UART_USR);
|
|
|
|
return;
|
|
}
|
|
}
|
|
|
|
#if defined(BOARD_TYPE_MILKV_DUO) || defined(BOARD_TYPE_MILKV_DUO_SPINOR)
|
|
|
|
#ifdef BSP_USING_UART0
|
|
static const char *pinname_whitelist_uart0_rx[] = {
|
|
"UART0_RX",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart0_tx[] = {
|
|
"UART0_TX",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
static const char *pinname_whitelist_uart1_rx[] = {
|
|
"IIC0_SDA",
|
|
"UART0_RX",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart1_tx[] = {
|
|
"IIC0_SCL",
|
|
"UART0_TX",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
static const char *pinname_whitelist_uart2_rx[] = {
|
|
"IIC0_SDA",
|
|
"SD1_D1",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart2_tx[] = {
|
|
"IIC0_SCL",
|
|
"SD1_D2",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART3
|
|
static const char *pinname_whitelist_uart3_rx[] = {
|
|
"SD1_D1",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart3_tx[] = {
|
|
"SD1_D2",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART4
|
|
static const char *pinname_whitelist_uart4_rx[] = {
|
|
"SD1_GPIO0",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart4_tx[] = {
|
|
"SD1_GPIO1",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#elif defined(BOARD_TYPE_MILKV_DUO256M) || defined(BOARD_TYPE_MILKV_DUO256M_SPINOR)
|
|
|
|
#ifdef BSP_USING_UART0
|
|
static const char *pinname_whitelist_uart0_rx[] = {
|
|
"UART0_RX",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart0_tx[] = {
|
|
"UART0_TX",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
static const char *pinname_whitelist_uart1_rx[] = {
|
|
"IIC0_SDA",
|
|
"JTAG_CPU_TCK",
|
|
"UART0_RX",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart1_tx[] = {
|
|
"IIC0_SCL",
|
|
"JTAG_CPU_TMS",
|
|
"UART0_TX",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
static const char *pinname_whitelist_uart2_rx[] = {
|
|
"IIC0_SDA",
|
|
"SD1_D1",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart2_tx[] = {
|
|
"IIC0_SCL",
|
|
"SD1_D2",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART3
|
|
static const char *pinname_whitelist_uart3_rx[] = {
|
|
"SD1_D1",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart3_tx[] = {
|
|
"SD1_D2",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART4
|
|
static const char *pinname_whitelist_uart4_rx[] = {
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart4_tx[] = {
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#elif defined(BOARD_TYPE_MILKV_DUOS)
|
|
|
|
#ifdef BSP_USING_UART0
|
|
static const char *pinname_whitelist_uart0_rx[] = {
|
|
"UART0_RX",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart0_tx[] = {
|
|
"UART0_TX",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
static const char *pinname_whitelist_uart1_rx[] = {
|
|
"JTAG_CPU_TCK",
|
|
"UART0_RX",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart1_tx[] = {
|
|
"JTAG_CPU_TMS",
|
|
"UART0_TX",
|
|
"IIC0_SCL",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
static const char *pinname_whitelist_uart2_rx[] = {
|
|
"VIVO_D9",
|
|
"VIVO_D5",
|
|
"VIVO_CLK",
|
|
"PWR_GPIO1",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart2_tx[] = {
|
|
"VIVO_D10",
|
|
"VIVO_D6",
|
|
"VIVO_D2",
|
|
"IIC0_SCL",
|
|
"PWR_GPIO0",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART3
|
|
static const char *pinname_whitelist_uart3_rx[] = {
|
|
"ADC2",
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart3_tx[] = {
|
|
"ADC3",
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART4
|
|
static const char *pinname_whitelist_uart4_rx[] = {
|
|
NULL,
|
|
};
|
|
static const char *pinname_whitelist_uart4_tx[] = {
|
|
NULL,
|
|
};
|
|
#endif
|
|
|
|
#else
|
|
#error "Unsupported board type!"
|
|
#endif
|
|
|
|
int rt_hw_uart_init(void)
|
|
{
|
|
struct hw_uart_device* uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
config.baud_rate = 115200;
|
|
|
|
#define BSP_INSTALL_UART_DEVICE(no) \
|
|
uart = &_uart##no##_device; \
|
|
_serial##no.ops = &_uart_ops; \
|
|
_serial##no.config = config; \
|
|
rt_hw_serial_register(&_serial##no, "uart" #no, RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart); \
|
|
rt_hw_interrupt_install(uart->irqno, rt_hw_uart_isr, &_serial##no, "uart" #no);
|
|
|
|
#ifdef BSP_USING_UART0
|
|
pinmux_config(BSP_UART0_RX_PINNAME, UART0_RX, pinname_whitelist_uart0_rx);
|
|
pinmux_config(BSP_UART0_TX_PINNAME, UART0_TX, pinname_whitelist_uart0_tx);
|
|
BSP_INSTALL_UART_DEVICE(0);
|
|
#if defined(ARCH_ARM)
|
|
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
|
#endif /* defined(ARCH_ARM) */
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
pinmux_config(BSP_UART1_RX_PINNAME, UART1_RX, pinname_whitelist_uart1_rx);
|
|
pinmux_config(BSP_UART1_TX_PINNAME, UART1_TX, pinname_whitelist_uart1_tx);
|
|
BSP_INSTALL_UART_DEVICE(1);
|
|
#if defined(ARCH_ARM)
|
|
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
|
#endif /* defined(ARCH_ARM) */
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
pinmux_config(BSP_UART2_RX_PINNAME, UART2_RX, pinname_whitelist_uart2_rx);
|
|
pinmux_config(BSP_UART2_TX_PINNAME, UART2_TX, pinname_whitelist_uart2_tx);
|
|
BSP_INSTALL_UART_DEVICE(2);
|
|
#if defined(ARCH_ARM)
|
|
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
|
#endif /* defined(ARCH_ARM) */
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART3
|
|
pinmux_config(BSP_UART3_RX_PINNAME, UART3_RX, pinname_whitelist_uart3_rx);
|
|
pinmux_config(BSP_UART3_TX_PINNAME, UART3_TX, pinname_whitelist_uart3_tx);
|
|
BSP_INSTALL_UART_DEVICE(3);
|
|
#if defined(ARCH_ARM)
|
|
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
|
#endif /* defined(ARCH_ARM) */
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART4
|
|
pinmux_config(BSP_UART4_RX_PINNAME, UART4_RX, pinname_whitelist_uart4_rx);
|
|
pinmux_config(BSP_UART4_TX_PINNAME, UART4_TX, pinname_whitelist_uart4_tx);
|
|
BSP_INSTALL_UART_DEVICE(4);
|
|
#if defined(ARCH_ARM)
|
|
uart->hw_base = (rt_size_t)rt_ioremap((void*)uart->hw_base, 0x10000);
|
|
#endif /* defined(ARCH_ARM) */
|
|
#endif
|
|
|
|
return 0;
|
|
}
|