527 lines
22 KiB
C
527 lines
22 KiB
C
////////////////////////////////////////////////////////////////////////////////
|
|
/// @file hal_i2c.c
|
|
/// @author AE TEAM
|
|
/// @brief THIS FILE PROVIDES ALL THE I2C FIRMWARE FUNCTIONS.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @attention
|
|
///
|
|
/// THE EXISTING FIRMWARE IS ONLY FOR REFERENCE, WHICH IS DESIGNED TO PROVIDE
|
|
/// CUSTOMERS WITH CODING INFORMATION ABOUT THEIR PRODUCTS SO THEY CAN SAVE
|
|
/// TIME. THEREFORE, MINDMOTION SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
|
|
/// CONSEQUENTIAL DAMAGES ABOUT ANY CLAIMS ARISING OUT OF THE CONTENT OF SUCH
|
|
/// HARDWARE AND/OR THE USE OF THE CODING INFORMATION CONTAINED HEREIN IN
|
|
/// CONNECTION WITH PRODUCTS MADE BY CUSTOMERS.
|
|
///
|
|
/// <H2><CENTER>© COPYRIGHT MINDMOTION </CENTER></H2>
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
|
|
// Define to prevent recursive inclusion
|
|
#define _HAL_I2C_C_
|
|
|
|
// Files includes
|
|
#include "hal_i2c.h"
|
|
#include "hal_rcc.h"
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup MM32_Hardware_Abstract_Layer
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup I2C_HAL
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @addtogroup I2C_Exported_Functions
|
|
/// @{
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Deinitializes the i2c peripheral registers to their default
|
|
/// reset values.
|
|
/// @param i2c: where n can be 1 or 2 to select the I2C peripheral.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_DeInit(I2C_TypeDef* i2c)
|
|
{
|
|
switch (*(vu32*)&i2c) {
|
|
case (u32)I2C1: // I2C1_BASE:
|
|
exRCC_APB1PeriphReset(RCC_APB1ENR_I2C1);
|
|
break;
|
|
case (u32)I2C2: // I2C2_BASE:
|
|
exRCC_APB1PeriphReset(RCC_APB1ENR_I2C2);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Initializes the i2c peripheral according to the specified
|
|
/// parameters in the init_struct.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param init_struct: pointer to a I2C_InitTypeDef structure that
|
|
/// contains the configuration information for the specified
|
|
/// I2C peripheral.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_Init(I2C_TypeDef* i2c, I2C_InitTypeDef* init_struct)
|
|
{
|
|
u32 pclk1 = HSI_VALUE;
|
|
u32 minSclLowTime = 0;
|
|
u32 i2cPeriod = 0;
|
|
u32 pclk1Period = 0;
|
|
|
|
|
|
i2c->IC_ENABLE &= ~I2C_ENR_ENABLE;
|
|
|
|
|
|
pclk1 = RCC_GetPCLK1Freq();
|
|
pclk1Period = 1000000000 / pclk1;
|
|
i2cPeriod = 1000000000 / init_struct->I2C_ClockSpeed;
|
|
|
|
minSclLowTime = pclk1 / init_struct->I2C_ClockSpeed ;
|
|
i2cPeriod = 82 / pclk1Period;
|
|
|
|
if (init_struct->I2C_ClockSpeed <= 100000) {
|
|
i2c->IC_SS_SCL_LCNT = (minSclLowTime - 13 - i2cPeriod) / 2;
|
|
i2c->IC_SS_SCL_HCNT = (minSclLowTime - 13 - i2cPeriod - i2c->IC_SS_SCL_LCNT);
|
|
}
|
|
else {
|
|
i2c->IC_FS_SCL_LCNT = (minSclLowTime - 13 - i2cPeriod ) / 2 + 4;
|
|
i2c->IC_FS_SCL_HCNT = (minSclLowTime - 13 - i2c->IC_FS_SCL_LCNT - i2cPeriod);
|
|
}
|
|
|
|
i2c->IC_CON &= ~(I2C_CR_EMPINT | \
|
|
I2C_CR_SLAVEDIS | \
|
|
I2C_CR_REPEN | \
|
|
I2C_CR_MASTER10 | \
|
|
I2C_CR_SLAVE10 | \
|
|
I2C_CR_FAST | \
|
|
I2C_CR_MASTER);
|
|
|
|
i2c->IC_CON = I2C_CR_EMPINT | \
|
|
I2C_CR_REPEN | \
|
|
((init_struct->I2C_Speed == I2C_CR_FAST) ? I2C_CR_FAST : I2C_CR_STD) | \
|
|
((init_struct->I2C_Mode) ? I2C_CR_MASTER : 0x00);
|
|
i2c->IC_INTR_MASK &= INTR_MASK;
|
|
|
|
i2c->IC_RX_TL = 0x00;
|
|
i2c->IC_TX_TL = 0x00;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Fills each init_struct member with its default value.
|
|
/// @param init_struct: pointer to an I2C_InitTypeDef structure
|
|
/// which will be initialized.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_StructInit(I2C_InitTypeDef* init_struct)
|
|
{
|
|
init_struct->I2C_Mode = I2C_CR_MASTER;
|
|
init_struct->I2C_OwnAddress = I2C_OWN_ADDRESS;
|
|
init_struct->I2C_Speed = I2C_CR_STD;
|
|
init_struct->I2C_ClockSpeed = 100000;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the specified I2C peripheral.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param state: new state of the i2c peripheral. This parameter
|
|
/// can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_Cmd(I2C_TypeDef* i2c, FunctionalState state)
|
|
{
|
|
(state) ? (i2c->IC_ENABLE |= I2C_ENR_ENABLE) : (i2c->IC_ENABLE &= ~I2C_ENR_ENABLE);
|
|
}
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the specified I2C DMA requests.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param state: new state of the I2C DMA transfer.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_DMACmd(I2C_TypeDef* i2c, FunctionalState state)
|
|
{
|
|
if (state) {
|
|
if (I2C_DMA_DIR == TDMAE_SET)
|
|
i2c->IC_DMA_CR |= TDMAE_SET;
|
|
|
|
else
|
|
i2c->IC_DMA_CR |= RDMAE_SET;
|
|
}
|
|
else
|
|
i2c->IC_DMA_CR &= ~(I2C_DMA_RXEN | I2C_DMA_TXEN);
|
|
}
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Generates i2c communication START condition.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param state: new state of the I2C START condition generation.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_GenerateSTART(I2C_TypeDef* i2c, FunctionalState state)
|
|
{
|
|
(state) ? (i2c->IC_CON |= I2C_CR_REPEN) : (i2c->IC_CON &= ~I2C_CR_REPEN);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Generates i2c communication STOP condition.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param state: new state of the I2C STOP condition generation.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_GenerateSTOP(I2C_TypeDef* i2c, FunctionalState state)
|
|
{
|
|
u16 overTime = 3000;
|
|
|
|
i2c->IC_ENABLE |= I2C_ENR_ABORT;
|
|
|
|
while (i2c->IC_ENABLE & I2C_ENR_ABORT) {
|
|
if (overTime-- == 0)
|
|
break;
|
|
}
|
|
i2c->IC_CLR_TX_ABRT;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Configures the specified I2C own address2.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param addr: specifies the 7bit I2C own address2.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_OwnAddress2Config(I2C_TypeDef* i2c, u8 addr)
|
|
{
|
|
MODIFY_REG(i2c->IC_TAR, (u16)I2C_TAR_ADDR, (u16)(addr >> 1));
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the specified I2C dual addressing mode.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param state: new state of the I2C dual addressing mode.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_DualAddressCmd(I2C_TypeDef* i2c, FunctionalState state)
|
|
{
|
|
(state) ? (i2c->IC_TAR |= IC_TAR_ENDUAL_Set) : (i2c->IC_TAR &= IC_TAR_ENDUAL_Reset);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the specified I2C general call feature.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param state: new state of the I2C General call.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_GeneralCallCmd(I2C_TypeDef* i2c, FunctionalState state)
|
|
{
|
|
(state) ? (i2c->IC_TAR |= I2C_TAR_SPECIAL) : (i2c->IC_TAR &= ~I2C_TAR_SPECIAL);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the specified I2C interrupts.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param it: specifies the I2C interrupts sources to be enabled
|
|
/// or disabled.
|
|
/// This parameter can be any combination of the following values:
|
|
/// @arg I2C_IT_RX_UNDER : Rx Buffer is empty interrupt mask
|
|
/// @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt mask
|
|
/// @arg I2C_IT_RX_FULL : Rx buffer full interrupt mask
|
|
/// @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt mask
|
|
/// @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt mask
|
|
/// @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt mask
|
|
/// @arg I2C_IT_TX_ABRT : TX error interrupt mask(Master mode)
|
|
/// @arg I2C_IT_RX_DONE : Master not ack interrupt mask(slave mode)
|
|
/// @arg I2C_IT_ACTIVITY : I2C activity interrupt mask
|
|
/// @arg I2C_IT_STOP_DET : stop condition interrupt mask
|
|
/// @arg I2C_IT_START_DET : start condition interrupt mask
|
|
/// @arg I2C_IT_GEN_CALL : a general call address and ack interrupt mask
|
|
/// @param state: new state of the specified I2C interrupts.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_ITConfig(I2C_TypeDef* i2c, u16 it, FunctionalState state)
|
|
{
|
|
if (it == I2C_IT_RX_FULL)
|
|
I2C_ReadCmd(i2c);
|
|
(state) ? SET_BIT(i2c->IC_INTR_MASK, it) : CLEAR_BIT(i2c->IC_INTR_MASK, (u16)it);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Sends a data byte through the i2c peripheral.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param dat: Byte to be transmitted..
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_SendData(I2C_TypeDef* i2c, u8 dat)
|
|
{
|
|
i2c->IC_DATA_CMD = dat;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Returns the most recent received data by the i2c peripheral.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @retval The value of the received data.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_ReadCmd(I2C_TypeDef* i2c)
|
|
{
|
|
i2c->IC_DATA_CMD = I2C_DR_CMD;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Returns the most recent received data by the i2c peripheral.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @retval The value of the received data.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
u8 I2C_ReceiveData(I2C_TypeDef* i2c)
|
|
{
|
|
I2C_CMD_DIR = 0;
|
|
return (u8)i2c->IC_DATA_CMD;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Transmits the address byte to select the slave device.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param addr: specifies the slave address which will be transmitted
|
|
/// @param dir: specifies whether the I2C device will be a
|
|
/// Transmitter or a Receiver.
|
|
/// This parameter can be one of the following values
|
|
/// @arg I2C_Direction_Transmitter: Transmitter mode
|
|
/// @arg I2C_Direction_Receiver: Receiver mode
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_Send7bitAddress(I2C_TypeDef* i2c, u8 addr, u8 dir)
|
|
{
|
|
i2c->IC_TAR = addr >> 1;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Reads the specified I2C register and returns its value.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param reg: specifies the register to read.
|
|
/// This parameter can be one of the following values:
|
|
/// @retval The value of the read register.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
u16 I2C_ReadRegister(I2C_TypeDef* i2c, u8 reg)
|
|
{
|
|
return (*(vu16*)(*((u32*)&i2c) + reg));
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Returns the last i2c Event.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @retval The last event
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
u32 I2C_GetLastEvent(I2C_TypeDef* i2c)
|
|
{
|
|
return (u32)i2c->IC_RAW_INTR_STAT & FLAG_Mask;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Checks whether the last i2c Event is equal to the one passed
|
|
/// as parameter.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param event: specifies the event to be checked.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg I2C_EVENT_RX_UNDER : Rx Buffer is empty event
|
|
/// @arg I2C_EVENT_RX_OVER : RX Buffer Overrun event
|
|
/// @arg I2C_EVENTT_RX_FULL : Rx buffer full event
|
|
/// @arg I2C_EVENT_TX_OVER : TX Buffer Overrun event
|
|
/// @arg I2C_EVENT_TX_EMPTY : TX_FIFO empty event
|
|
/// @arg I2C_EVENT_RD_REQ : I2C work as slave or master event
|
|
/// @arg I2C_EVENT_TX_ABRT : TX error event(Master mode)
|
|
/// @arg I2C_EVENT_RX_DONE : Master not ack event(slave mode)
|
|
/// @arg I2C_EVENT_ACTIVITY : I2C activity event
|
|
/// @arg I2C_EVENT_STOP_DET : stop condition event
|
|
/// @arg I2C_EVENT_START_DET: start condition event
|
|
/// @arg I2C_EVENT_GEN_CALL : a general call address and ack event
|
|
/// - SUCCESS: Last event is equal to the I2C_EVENT
|
|
/// - ERROR: Last event is different from the I2C_EVENT
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
ErrorStatus I2C_CheckEvent(I2C_TypeDef* i2c, u32 event)
|
|
{
|
|
if ((event == I2C_EVENT_RX_FULL) && (I2C_CMD_DIR == 0)) {
|
|
i2c->IC_DATA_CMD = I2C_DR_CMD;
|
|
I2C_CMD_DIR = 1;
|
|
}
|
|
|
|
return (ErrorStatus)((i2c->IC_RAW_INTR_STAT & event) == event);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Checks whether the specified I2C flag is set or not.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param flag: specifies the flag to check.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg I2C_FLAG_RX_UNDER : Rx Buffer is empty flag
|
|
/// @arg I2C_FLAG_RX_OVER : RX Buffer Overrun flag
|
|
/// @arg I2C_FLAG_RX_FULL : Rx buffer full flag
|
|
/// @arg I2C_FLAG_TX_OVER : TX Buffer Overrun flag
|
|
/// @arg I2C_FLAG_TX_EMPTY : TX_FIFO empty flag
|
|
/// @arg I2C_FLAG_RD_REQ : I2C work as slave or master flag
|
|
/// @arg I2C_FLAG_TX_ABRT : TX error flag(Master mode)
|
|
/// @arg I2C_FLAG_RX_DONE : Master not ack flag(slave mode)
|
|
/// @arg I2C_FLAG_ACTIVITY : I2C activity flag
|
|
/// @arg I2C_FLAG_STOP_DET : stop condition flag
|
|
/// @arg I2C_FLAG_START_DET: start condition flag
|
|
/// @arg I2C_FLAG_GEN_CALL : a general call address and ack flag
|
|
/// @retval The new state of I2C_FLAG (SET or RESET).
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
FlagStatus I2C_GetFlagStatus(I2C_TypeDef* i2c, u32 flag)
|
|
{
|
|
if (flag & 0x8000)
|
|
return ((i2c->IC_STATUS & flag) ? SET : RESET);
|
|
|
|
if ((flag == I2C_FLAG_RX_FULL) && (I2C_CMD_DIR == 0)) {
|
|
i2c->IC_DATA_CMD = I2C_DR_CMD;
|
|
I2C_CMD_DIR = 1;
|
|
}
|
|
return (((i2c->IC_RAW_INTR_STAT & flag)) ? SET : RESET);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Clears the i2c's pending flags.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param flag: specifies the flag to clear.
|
|
/// This parameter can be any combination of the following values:
|
|
/// @arg I2C_FLAG_RX_UNDER : Rx Buffer is empty flag
|
|
/// @arg I2C_FLAG_RX_OVER : RX Buffer Overrun flag
|
|
/// @arg I2C_FLAG_RX_FULL : Rx buffer full flag
|
|
/// @arg I2C_FLAG_TX_OVER : TX Buffer Overrun flag
|
|
/// @arg I2C_FLAG_TX_EMPTY : TX_FIFO empty flag
|
|
/// @arg I2C_FLAG_RD_REQ : I2C work as slave or master flag
|
|
/// @arg I2C_FLAG_TX_ABRT : TX error flag(Master mode)
|
|
/// @arg I2C_FLAG_RX_DONE : Master not ack flag(slave mode)
|
|
/// @arg I2C_FLAG_ACTIVITY : I2C activity flag
|
|
/// @arg I2C_FLAG_STOP_DET : stop condition flag
|
|
/// @arg I2C_FLAG_START_DET: start condition flag
|
|
/// @arg I2C_FLAG_GEN_CALL : a general call address and ack flag
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_ClearFlag(I2C_TypeDef* i2c, u32 flag)
|
|
{
|
|
if ((flag & I2C_FLAG_RX_UNDER) == I2C_FLAG_RX_UNDER)
|
|
i2c->IC_CLR_RX_UNDER;
|
|
if ((flag & I2C_FLAG_RX_OVER) == I2C_FLAG_RX_OVER)
|
|
i2c->IC_CLR_RX_OVER;
|
|
if ((flag & I2C_FLAG_TX_OVER) == I2C_FLAG_TX_OVER)
|
|
i2c->IC_CLR_TX_OVER;
|
|
if ((flag & I2C_FLAG_RD_REQ) == I2C_FLAG_RD_REQ)
|
|
i2c->IC_CLR_RD_REQ;
|
|
if ((flag & I2C_FLAG_TX_ABRT) == I2C_FLAG_TX_ABRT)
|
|
i2c->IC_CLR_TX_ABRT;
|
|
if ((flag & I2C_FLAG_RX_DONE) == I2C_FLAG_RX_DONE)
|
|
i2c->IC_CLR_RX_DONE;
|
|
if ((flag & I2C_FLAG_ACTIVITY) == I2C_FLAG_ACTIVITY)
|
|
i2c->IC_CLR_ACTIVITY;
|
|
if ((flag & I2C_FLAG_STOP_DET) == I2C_FLAG_STOP_DET)
|
|
i2c->IC_CLR_STOP_DET;
|
|
if ((flag & I2C_FLAG_START_DET) == I2C_FLAG_START_DET)
|
|
i2c->IC_CLR_START_DET;
|
|
if ((flag & I2C_FLAG_GEN_CALL) == I2C_FLAG_GEN_CALL)
|
|
i2c->IC_CLR_GEN_CALL;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Checks whether the specified I2C interrupt has occurred or not.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param it: specifies the interrupt source to check.
|
|
/// This parameter can be one of the following values:
|
|
/// @arg I2C_IT_RX_UNDER : Rx Buffer is empty interrupt
|
|
/// @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt
|
|
/// @arg I2C_IT_RX_FULL : Rx buffer full interrupt
|
|
/// @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt
|
|
/// @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt
|
|
/// @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt
|
|
/// @arg I2C_IT_TX_ABRT : TX error interrupt (Master mode)
|
|
/// @arg I2C_IT_RX_DONE : Master not ack interrupt (slave mode)
|
|
/// @arg I2C_IT_ACTIVITY : I2C activity interrupt
|
|
/// @arg I2C_IT_STOP_DET : stop condition interrupt
|
|
/// @arg I2C_IT_START_DET: start condition interrupt
|
|
/// @arg I2C_IT_GEN_CALL : a general call address and ack interrupt
|
|
/// @retval The new state of I2C_IT (SET or RESET).
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
ITStatus I2C_GetITStatus(I2C_TypeDef* i2c, u32 it)
|
|
{
|
|
return ((i2c->IC_RAW_INTR_STAT & it) ? SET : RESET);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Clears the i2c interrupt pending bits.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param it: specifies the interrupt pending bit to clear.
|
|
/// This parameter can be any combination of the following values:
|
|
/// @arg I2C_IT_RX_UNDER : Rx Buffer is empty interrupt
|
|
/// @arg I2C_IT_RX_OVER : RX Buffer Overrun interrupt
|
|
/// @arg I2C_IT_RX_FULL : Rx buffer full interrupt
|
|
/// @arg I2C_IT_TX_OVER : TX Buffer Overrun interrupt
|
|
/// @arg I2C_IT_TX_EMPTY : TX_FIFO empty interrupt
|
|
/// @arg I2C_IT_RD_REQ : I2C work as slave or master interrupt
|
|
/// @arg I2C_IT_TX_ABRT : TX error interrupt (Master mode)
|
|
/// @arg I2C_IT_RX_DONE : Master not ack interrupt (slave mode)
|
|
/// @arg I2C_IT_ACTIVITY : I2C activity interrupt
|
|
/// @arg I2C_IT_STOP_DET : stop condition interrupt
|
|
/// @arg I2C_IT_START_DET: start condition interrupt
|
|
/// @arg I2C_IT_GEN_CALL : a general call address and ack interrupt
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_ClearITPendingBit(I2C_TypeDef* i2c, u32 it)
|
|
{
|
|
if ((it & I2C_IT_RX_UNDER) == I2C_FLAG_RX_UNDER)
|
|
i2c->IC_CLR_RX_UNDER;
|
|
if ((it & I2C_IT_RX_OVER) == I2C_FLAG_RX_OVER)
|
|
i2c->IC_CLR_RX_OVER;
|
|
if ((it & I2C_IT_TX_OVER) == I2C_FLAG_TX_OVER)
|
|
i2c->IC_CLR_TX_OVER;
|
|
if ((it & I2C_IT_RD_REQ) == I2C_FLAG_RD_REQ)
|
|
i2c->IC_CLR_RD_REQ;
|
|
if ((it & I2C_IT_TX_ABRT) == I2C_FLAG_TX_ABRT)
|
|
i2c->IC_CLR_TX_ABRT;
|
|
if ((it & I2C_IT_RX_DONE) == I2C_FLAG_RX_DONE)
|
|
i2c->IC_CLR_RX_DONE;
|
|
if ((it & I2C_IT_ACTIVITY) == I2C_FLAG_ACTIVITY)
|
|
i2c->IC_CLR_ACTIVITY;
|
|
if ((it & I2C_IT_STOP_DET) == I2C_FLAG_STOP_DET)
|
|
i2c->IC_CLR_STOP_DET;
|
|
if ((it & I2C_IT_START_DET) == I2C_FLAG_START_DET)
|
|
i2c->IC_CLR_START_DET;
|
|
if ((it & I2C_IT_GEN_CALL) == I2C_FLAG_GEN_CALL)
|
|
i2c->IC_CLR_GEN_CALL;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// New Function Interface
|
|
//
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Configures slave address.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param addr: specifies the slave address which will be transmitted
|
|
/// This parameter can be one of the following values
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_SendSlaveAddress(I2C_TypeDef* i2c, u8 addr)
|
|
{
|
|
WRITE_REG(i2c->IC_SAR, addr >> 1);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
/// @brief Enables or disables the I2C slave mode.
|
|
/// @param i2c: select the I2C peripheral.
|
|
/// @param state: new state of the specified I2C interrupts.
|
|
/// This parameter can be: ENABLE or DISABLE.
|
|
/// @retval None.
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
void I2C_SlaveConfigure(I2C_TypeDef* i2c, FunctionalState state)
|
|
{
|
|
(state) ? CLEAR_BIT(i2c->IC_CON, I2C_CR_SLAVEDIS) : SET_BIT(i2c->IC_CON, I2C_CR_SLAVEDIS);
|
|
}
|
|
/// @}
|
|
|
|
/// @}
|
|
|
|
/// @}
|