rt-thread-official/bsp/tm4c129x/libraries/inc/hw_ssi.h

239 lines
13 KiB
C

//*****************************************************************************
//
// hw_ssi.h - Macros used when accessing the SSI hardware.
//
// Copyright (c) 2005-2014 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 2.1.0.12573 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_SSI_H__
#define __HW_SSI_H__
//*****************************************************************************
//
// The following are defines for the SSI register offsets.
//
//*****************************************************************************
#define SSI_O_CR0 0x00000000 // SSI Control 0
#define SSI_O_CR1 0x00000004 // SSI Control 1
#define SSI_O_DR 0x00000008 // SSI Data
#define SSI_O_SR 0x0000000C // SSI Status
#define SSI_O_CPSR 0x00000010 // SSI Clock Prescale
#define SSI_O_IM 0x00000014 // SSI Interrupt Mask
#define SSI_O_RIS 0x00000018 // SSI Raw Interrupt Status
#define SSI_O_MIS 0x0000001C // SSI Masked Interrupt Status
#define SSI_O_ICR 0x00000020 // SSI Interrupt Clear
#define SSI_O_DMACTL 0x00000024 // SSI DMA Control
#define SSI_O_PP 0x00000FC0 // SSI Peripheral Properties
#define SSI_O_CC 0x00000FC8 // SSI Clock Configuration
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR0 register.
//
//*****************************************************************************
#define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate
#define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase
#define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity
#define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select
#define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format
#define SSI_CR0_FRF_TI 0x00000010 // Synchronous Serial Frame Format
#define SSI_CR0_FRF_NMW 0x00000020 // MICROWIRE Frame Format
#define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select
#define SSI_CR0_DSS_4 0x00000003 // 4-bit data
#define SSI_CR0_DSS_5 0x00000004 // 5-bit data
#define SSI_CR0_DSS_6 0x00000005 // 6-bit data
#define SSI_CR0_DSS_7 0x00000006 // 7-bit data
#define SSI_CR0_DSS_8 0x00000007 // 8-bit data
#define SSI_CR0_DSS_9 0x00000008 // 9-bit data
#define SSI_CR0_DSS_10 0x00000009 // 10-bit data
#define SSI_CR0_DSS_11 0x0000000A // 11-bit data
#define SSI_CR0_DSS_12 0x0000000B // 12-bit data
#define SSI_CR0_DSS_13 0x0000000C // 13-bit data
#define SSI_CR0_DSS_14 0x0000000D // 14-bit data
#define SSI_CR0_DSS_15 0x0000000E // 15-bit data
#define SSI_CR0_DSS_16 0x0000000F // 16-bit data
#define SSI_CR0_SCR_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR1 register.
//
//*****************************************************************************
#define SSI_CR1_EOM 0x00000800 // Stop Frame (End of Message)
#define SSI_CR1_FSSHLDFRM 0x00000400 // FSS Hold Frame
#define SSI_CR1_HSCLKEN 0x00000200 // High Speed Clock Enable
#define SSI_CR1_DIR 0x00000100 // SSI Direction of Operation
#define SSI_CR1_MODE_M 0x000000C0 // SSI Mode
#define SSI_CR1_MODE_LEGACY 0x00000000 // Legacy SSI mode
#define SSI_CR1_MODE_BI 0x00000040 // Bi-SSI mode
#define SSI_CR1_MODE_QUAD 0x00000080 // Quad-SSI Mode
#define SSI_CR1_MODE_ADVANCED 0x000000C0 // Advanced SSI Mode with 8-bit
// packet size
#define SSI_CR1_EOT 0x00000010 // End of Transmission
#define SSI_CR1_SOD 0x00000008 // SSI Slave Mode Output Disable
#define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select
#define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port
// Enable
#define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DR register.
//
//*****************************************************************************
#define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data
#define SSI_DR_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_SR register.
//
//*****************************************************************************
#define SSI_SR_BSY 0x00000010 // SSI Busy Bit
#define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full
#define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty
#define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full
#define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CPSR register.
//
//*****************************************************************************
#define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor
#define SSI_CPSR_CPSDVSR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_IM register.
//
//*****************************************************************************
#define SSI_IM_EOTIM 0x00000040 // End of Transmit Interrupt Mask
#define SSI_IM_DMATXIM 0x00000020 // SSI Transmit DMA Interrupt Mask
#define SSI_IM_DMARXIM 0x00000010 // SSI Receive DMA Interrupt Mask
#define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask
#define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask
#define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt
// Mask
#define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_RIS register.
//
//*****************************************************************************
#define SSI_RIS_EOTRIS 0x00000040 // End of Transmit Raw Interrupt
// Status
#define SSI_RIS_DMATXRIS 0x00000020 // SSI Transmit DMA Raw Interrupt
// Status
#define SSI_RIS_DMARXRIS 0x00000010 // SSI Receive DMA Raw Interrupt
// Status
#define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt
// Status
#define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt
// Status
#define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw
// Interrupt Status
#define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_MIS register.
//
//*****************************************************************************
#define SSI_MIS_EOTMIS 0x00000040 // End of Transmit Masked Interrupt
// Status
#define SSI_MIS_DMATXMIS 0x00000020 // SSI Transmit DMA Masked
// Interrupt Status
#define SSI_MIS_DMARXMIS 0x00000010 // SSI Receive DMA Masked Interrupt
// Status
#define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked
// Interrupt Status
#define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked
// Interrupt Status
#define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked
// Interrupt Status
#define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_ICR register.
//
//*****************************************************************************
#define SSI_ICR_EOTIC 0x00000040 // End of Transmit Interrupt Clear
#define SSI_ICR_DMATXIC 0x00000020 // SSI Transmit DMA Interrupt Clear
#define SSI_ICR_DMARXIC 0x00000010 // SSI Receive DMA Interrupt Clear
#define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt
// Clear
#define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt
// Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DMACTL register.
//
//*****************************************************************************
#define SSI_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable
#define SSI_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_PP register.
//
//*****************************************************************************
#define SSI_PP_FSSHLDFRM 0x00000008 // FSS Hold Frame Capability
#define SSI_PP_MODE_M 0x00000006 // Mode of Operation
#define SSI_PP_MODE_LEGACY 0x00000000 // Legacy SSI mode
#define SSI_PP_MODE_ADVBI 0x00000002 // Legacy mode, Advanced SSI mode
// and Bi-SSI mode enabled
#define SSI_PP_MODE_ADVBIQUAD 0x00000004 // Legacy mode, Advanced mode,
// Bi-SSI and Quad-SSI mode enabled
#define SSI_PP_HSCLK 0x00000001 // High Speed Capability
//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CC register.
//
//*****************************************************************************
#define SSI_CC_CS_M 0x0000000F // SSI Baud Clock Source
#define SSI_CC_CS_SYSPLL 0x00000000 // System clock (based on clock
// source and divisor factor)
#define SSI_CC_CS_PIOSC 0x00000005 // PIOSC
#endif // __HW_SSI_H__