288 lines
8.0 KiB
C
288 lines
8.0 KiB
C
/*
|
|
* File : board.c
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2009 RT-Thread Develop Team
|
|
*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://www.rt-thread.org/license/LICENSE
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2010-03-08 Bernard The first version for LPC17xx
|
|
* 2010-04-10 fify Modified for M16C
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
#include "iom16c62p.h"
|
|
#include "bsp.h"
|
|
#include "uart.h"
|
|
|
|
#if defined(RT_USING_UART0) && defined(RT_USING_DEVICE)
|
|
|
|
struct rt_uart_m16c
|
|
{
|
|
struct rt_device parent;
|
|
|
|
/* buffer for reception */
|
|
rt_uint8_t read_index, save_index;
|
|
rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE];
|
|
}uart_device;
|
|
|
|
void u0rec_handler(void)
|
|
{
|
|
rt_ubase_t level;
|
|
rt_uint8_t c;
|
|
|
|
struct rt_uart_m16c *uart = &uart_device;
|
|
|
|
while (U0C1.BIT.RI == 0)
|
|
;
|
|
c = U0RB.BYTE.U0RBL;
|
|
|
|
/* Receive Data Available */
|
|
uart->rx_buffer[uart->save_index] = c;
|
|
|
|
level = rt_hw_interrupt_disable();
|
|
uart->save_index ++;
|
|
if (uart->save_index >= RT_UART_RX_BUFFER_SIZE)
|
|
uart->save_index = 0;
|
|
rt_hw_interrupt_enable(level);
|
|
|
|
/* invoke callback */
|
|
if (uart->parent.rx_indicate != RT_NULL)
|
|
{
|
|
rt_size_t length;
|
|
if (uart->read_index > uart->save_index)
|
|
length = RT_UART_RX_BUFFER_SIZE - uart->read_index + uart->save_index;
|
|
else
|
|
length = uart->save_index - uart->read_index;
|
|
|
|
uart->parent.rx_indicate(&uart->parent, length);
|
|
}
|
|
}
|
|
|
|
static rt_err_t rt_uart_init (rt_device_t dev)
|
|
{
|
|
rt_uint32_t level;
|
|
/* set UART0 bit rate generator bit rate can be calculated by:
|
|
bit rate = ((BRG count source / 16)/baud rate) - 1
|
|
Baud rate is based on main crystal or PLL not CPU core clock */
|
|
//pclk1 = 1; /// seleck F1SIO
|
|
U0BRG = (unsigned char)(((CPU_CLK_FREQ/16)/BAUD_RATE)-1); //(N+1)
|
|
|
|
/* UART Transmit/Receive Control Register 2 */
|
|
UCON.BYTE = 0x00;
|
|
/* 00000000
|
|
b0 U0IRS UART0 transmit irq cause select bit, 0 = transmit buffer empty
|
|
b1 U1IRS UART1 transmit irq cause select bit, 0 = transmit buffer empty
|
|
b2 U0RRM UART0 continuous receive mode enable bit, set to 0 in UART mode
|
|
b3 U1RRM UART1 continuous receive mode enable bit, set to 0 in UART mode
|
|
b4 CLKMD0 CLK/CLKS select bit 0, set to 0 in UART mode
|
|
b5 CLKMD1 CLK/CLKS select bit 1, set to 0 in UART mode
|
|
b6 RCSP Separate CTS/RTS bit,
|
|
b7 Reserved, set to 0 */
|
|
|
|
/* UART0 transmit/receive control register 0 */
|
|
/* f1 count source, CTS/RTS disabled, CMOS output */
|
|
U0C0.BYTE = 0x10;
|
|
/* 00010000
|
|
b1:b0 CLK01:CLK0 BRG count source select bits //01 F8SIO
|
|
b2 CRS CTS/RTS function select bit
|
|
b3 TXEPT Transmit register empty flag
|
|
b4 CRD CTS/RTS disable bit
|
|
b5 NCH Data output select bit
|
|
b6 CKPOL CLK polarity select bit,set to 0 in UART mode
|
|
b7 UFORM Transfer format select bit,set to 0 in UART mode */
|
|
|
|
/* UART0 transmit/receive control register 1 */
|
|
/* disable transmit and receive, no error output pin, data not inverted */
|
|
U0C1.BYTE = 0x00;
|
|
/* 00000000
|
|
b0 TE Transmit enable bit
|
|
b1 TI Transmit buffer empty flag
|
|
b2 RE Receive enable bit
|
|
b3 RI Receive complete flag
|
|
b5:b4 Reserved, set to 0
|
|
b6 UOLCH Data logic select bit
|
|
b7 UOERE Error signal output enable bit */
|
|
|
|
/* UART0 transmit/receive mode register */
|
|
/* 8-bit data,asynch mode, internal clock, 1 stop bit, no parity */
|
|
U0MR.BYTE = 0x05;
|
|
/* 00000101
|
|
b2:b0 SMD12:SMD1 Serial I/O Mode select bits
|
|
b3 CKDIR Internal/External clock select bit, CKDIR
|
|
b4 STPS Stop bit length select bit, STPS
|
|
b5 PRY Odd/even parity select bit, PRY
|
|
b6 PRYE Parity enable bit, PRYE
|
|
b7 IOPOL TxD, RxD I/O polarity reverse bit */
|
|
|
|
/* clear UART0 receive buffer by reading */
|
|
U0TB.WORD = U0RB.WORD;
|
|
/* clear UART0 transmit buffer */
|
|
U0TB.WORD = 0;
|
|
|
|
/* disable irqs before setting irq registers */
|
|
level = rt_hw_interrupt_disable();
|
|
/* Enable UART0 receive interrupt, priority level 4 */
|
|
S0RIC.BYTE = 0x04;
|
|
/* Enable all interrupts */
|
|
rt_hw_interrupt_enable(level);
|
|
|
|
/* UART0 transmit/receive control register 1 */
|
|
/* enable transmit and receive */
|
|
U0C1.BYTE = 0x05;
|
|
/* 00000101 enable transmit and receive
|
|
b0 TE Transmit enable bit
|
|
b1 TI Transmit buffer empty flag
|
|
b2 RE Receive enable bit
|
|
b3 RI Receive complete flag
|
|
b5:b4 Reserved, set to 0
|
|
b6 UOLCH Data logic select bit
|
|
b7 UOERE Error signal output enable bit */
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t rt_uart_open(rt_device_t dev, rt_uint16_t oflag)
|
|
{
|
|
RT_ASSERT(dev != RT_NULL);
|
|
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
|
|
{
|
|
/* Enable the UART Interrupt */
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t rt_uart_close(rt_device_t dev)
|
|
{
|
|
RT_ASSERT(dev != RT_NULL);
|
|
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
|
|
{
|
|
/* Disable the UART Interrupt */
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_size_t rt_uart_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
|
|
{
|
|
rt_uint8_t *ptr;
|
|
struct rt_uart_m16c *uart = (struct rt_uart_m16c *)dev;
|
|
RT_ASSERT(uart != RT_NULL);
|
|
|
|
/* point to buffer */
|
|
ptr = (rt_uint8_t *)buffer;
|
|
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
|
|
{
|
|
while (size)
|
|
{
|
|
/* interrupt receive */
|
|
rt_base_t level;
|
|
|
|
/* disable interrupt */
|
|
level = rt_hw_interrupt_disable();
|
|
if (uart->read_index != uart->save_index)
|
|
{
|
|
*ptr = uart->rx_buffer[uart->read_index];
|
|
|
|
uart->read_index ++;
|
|
if (uart->read_index >= RT_UART_RX_BUFFER_SIZE)
|
|
uart->read_index = 0;
|
|
}
|
|
else
|
|
{
|
|
/* no data in rx buffer */
|
|
|
|
/* enable interrupt */
|
|
rt_hw_interrupt_enable(level);
|
|
break;
|
|
}
|
|
|
|
/* enable interrupt */
|
|
rt_hw_interrupt_enable(level);
|
|
|
|
ptr ++;
|
|
size --;
|
|
}
|
|
|
|
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
|
|
{
|
|
char *ptr;
|
|
ptr = (char *)buffer;
|
|
|
|
if (dev->flag & RT_DEVICE_FLAG_STREAM)
|
|
{
|
|
/* stream mode */
|
|
while (size)
|
|
{
|
|
if (*ptr == '\n')
|
|
{
|
|
while (U0C1.BIT.TI == 0)
|
|
;
|
|
U0TB.BYTE.U0TBL = '\r';
|
|
}
|
|
|
|
/* THRE status, contain valid data */
|
|
while (U0C1.BIT.TI == 0)
|
|
;
|
|
U0TB.BYTE.U0TBL = *ptr;
|
|
|
|
ptr ++;
|
|
size --;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
while (size != 0)
|
|
{
|
|
/* THRE status, contain valid data */
|
|
while (U0C1.BIT.TI == 0)
|
|
;
|
|
U0TB.BYTE.U0TBL = *ptr;
|
|
|
|
ptr ++;
|
|
size --;
|
|
}
|
|
}
|
|
|
|
return (rt_size_t)ptr - (rt_size_t)buffer;
|
|
}
|
|
|
|
void rt_hw_uart_init(void)
|
|
{
|
|
struct rt_uart_m16c *uart;
|
|
|
|
/* get uart device */
|
|
uart = &uart_device;
|
|
|
|
/* device initialization */
|
|
uart->parent.type = RT_Device_Class_Char;
|
|
rt_memset(uart->rx_buffer, 0, sizeof(uart->rx_buffer));
|
|
uart->read_index = uart->save_index = 0;
|
|
|
|
/* device interface */
|
|
uart->parent.init = rt_uart_init;
|
|
uart->parent.open = rt_uart_open;
|
|
uart->parent.close = rt_uart_close;
|
|
uart->parent.read = rt_uart_read;
|
|
uart->parent.write = rt_uart_write;
|
|
uart->parent.control = RT_NULL;
|
|
uart->parent.user_data = RT_NULL;
|
|
|
|
rt_device_register(&uart->parent,
|
|
"uart0", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STREAM | RT_DEVICE_FLAG_INT_RX);
|
|
}
|
|
#endif /* end of UART */
|
|
|
|
/*@}*/
|