220 lines
6.3 KiB
C
220 lines
6.3 KiB
C
/*
|
|
* Copyright (c) 2020-2021, Bluetrum Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2021-04-12 greedyhao first version
|
|
*/
|
|
|
|
#include <board.h>
|
|
|
|
#ifdef BSP_USING_IRRX
|
|
|
|
//#define DRV_DEBUG
|
|
#define LOG_TAG "drv.irrx"
|
|
#include <drv_log.h>
|
|
|
|
#ifdef BSP_USING_TIM3
|
|
#error "IRRX is conflict with hardware timer3!"
|
|
#endif
|
|
|
|
#ifdef BSP_USING_IRRX_HW
|
|
///硬件IR receiver参数
|
|
#define IR32KSEL_EN 0 //IR clock source select 32K
|
|
#if IR32KSEL_EN
|
|
#define RPTERR_CNT 33 //配置11.25ms ± (RPTERR_CNT + 1)*32K的repeat code允许范围
|
|
#define DATERR_CNT 33 //配置13.5ms ± (DATERR_CNT + 1)*32K引导码允许范围
|
|
#define ONEERR_CNT 7 //配置2.25ms ± (ONEERR_CNT + 1)*32K的logic "1"允许范围
|
|
#define ZEROERR_CNT 3 //配置1.12ms ± (ONEERR_CNT + 1)*32K数logic "0"允许范围
|
|
#define TOPR_CNT 55 //IR time out length = (TOPR + 1) * 64 *32K
|
|
#else
|
|
#define RPTERR_CNT 1000 //配置11.25ms ± (RPTERR_CNT + 1)us的repeat code允许范围
|
|
#define DATERR_CNT 1000 //配置13.5ms ± (DATERR_CNT + 1)us引导码允许范围
|
|
#define ONEERR_CNT 250 //配置2.25ms ± (ONEERR_CNT + 1)us的logic "1"允许范围
|
|
#define ZEROERR_CNT 125 //配置1.12ms ± (ONEERR_CNT + 1)us数logic "0"允许范围
|
|
#define TOPR_CNT 1718 //IR time out length = (TOPR + 1) * 64 us
|
|
#endif // IR32KSEL_EN
|
|
#endif // BSP_USING_IRRX_HW
|
|
|
|
#define NO_KEY (0u)
|
|
|
|
struct ab32_irrx_data{
|
|
rt_uint16_t cnt; //ir data bit counter
|
|
rt_uint16_t rpt_cnt; //ir repeat counter
|
|
rt_uint16_t addr; //address, inverted address Extended NEC: 16bits address
|
|
rt_uint16_t cmd; //command, inverted command
|
|
};
|
|
typedef struct ab32_irrx_data *ab32_irrx_data_t;
|
|
|
|
static struct ab32_irrx_data _irrx = {0};
|
|
|
|
/**
|
|
* @brief A non-zero value is returned
|
|
* when IR key is detectedto be pressed.
|
|
*
|
|
* @param addr inverted address Extended NEC: 16bits address
|
|
* @param cmd inverted command
|
|
*/
|
|
rt_section(".irq.irrx")
|
|
rt_uint8_t ab32_get_irkey(rt_uint16_t *addr, rt_uint16_t *cmd)
|
|
{
|
|
if (_irrx.cnt != 32) {
|
|
return NO_KEY;
|
|
}
|
|
if (addr != RT_NULL) {
|
|
*addr = _irrx.addr;
|
|
}
|
|
if (cmd != RT_NULL) {
|
|
*cmd = _irrx.cmd;
|
|
}
|
|
return !NO_KEY;
|
|
}
|
|
|
|
/**
|
|
* @brief Invalid the current IR key.
|
|
*
|
|
*/
|
|
void ab32_clr_irkey(void)
|
|
{
|
|
_irrx.cnt = 0;
|
|
}
|
|
|
|
#ifdef BSP_USING_IRRX_HW
|
|
rt_section(".irq.irrx")
|
|
static void irrx_isr(int vector, void *param)
|
|
{
|
|
rt_interrupt_enter();
|
|
|
|
//IR RX data finish interrupt
|
|
if (IRRXCON & BIT(16)) {
|
|
IRRXCPND = BIT(16);
|
|
_irrx.addr = (rt_uint16_t)IRRXDAT;
|
|
_irrx.cmd = (rt_uint16_t)(IRRXDAT >> 16);
|
|
_irrx.cnt = 32;
|
|
}
|
|
|
|
//IR key release interrupt
|
|
if (IRRXCON & BIT(17)) {
|
|
IRRXCPND = BIT(17);
|
|
_irrx.cnt = 0;
|
|
}
|
|
|
|
rt_interrupt_leave();
|
|
}
|
|
|
|
static void _irrx_hw_init(void)
|
|
{
|
|
GPIOEDE |= BIT(6);
|
|
GPIOEPU |= BIT(6);
|
|
GPIOEDIR |= BIT(6);
|
|
FUNCMCON2 |= 0xf << 20;
|
|
FUNCMCON2 |= (7 << 20); //IR mapping to G6
|
|
rt_memset(&_irrx, 0, sizeof(_irrx));
|
|
|
|
IRRXERR0 = (RPTERR_CNT << 16) | DATERR_CNT; //RPTERR[27:16], DATERR[11:0]
|
|
IRRXERR1 = (TOPR_CNT << 20) | (ONEERR_CNT << 10) | ZEROERR_CNT; //TOPR[31:20], ONEERR[19:10], ZEROERR[9:0]
|
|
|
|
#if IR32KSEL_EN
|
|
CLKCON1 &= ~BIT(5);
|
|
CLKCON1 |= BIT(4); //enable 26M分频32K
|
|
IRRXCON |= BIT(3); //ir clock source select 32K
|
|
#endif // IR32KSEL_EN
|
|
|
|
rt_hw_interrupt_install(IRQ_IRRX_VECTOR, irrx_isr, RT_NULL, "irrx_isr");
|
|
IRRXCON = 0x03;
|
|
|
|
// LOG_D("IRRXCON:%08x", IRRXCON);
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_IRRX_SW
|
|
|
|
#define TMR3_RCLK (1000u) //xosc26m_div 1M
|
|
|
|
rt_section(".irq.irrx")
|
|
static void irrx_isr(int vector, void *param)
|
|
{
|
|
rt_uint32_t tmrcnt;
|
|
|
|
if (TMR3CON & BIT(17)) {
|
|
//timer1 capture interrupt
|
|
TMR3CNT = TMR3CNT - TMR3CPT;
|
|
tmrcnt = TMR3CPT;
|
|
TMR3CPND = BIT(17);
|
|
tmrcnt /= TMR3_RCLK; //convert to ms
|
|
} else if (TMR3CON & BIT(16)){
|
|
//timer1 overflow interrupt
|
|
TMR3CPND = BIT(16);
|
|
tmrcnt = 110; //110ms overflow
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
//processing repeat code
|
|
if (_irrx.cnt == 32) {
|
|
if ((tmrcnt >= 10) && (tmrcnt <= 12)) {
|
|
//repeat code is simply 9ms+2.25ms
|
|
_irrx.rpt_cnt = 0;
|
|
} else {
|
|
_irrx.rpt_cnt += tmrcnt;
|
|
if (_irrx.rpt_cnt > 108) {
|
|
_irrx.rpt_cnt = 0;
|
|
_irrx.cnt = 0; //ir key release
|
|
}
|
|
}
|
|
return;
|
|
} else if ((tmrcnt > 7) || (tmrcnt == 0)) { //A message is started by a 9ms AGC burst
|
|
_irrx.rpt_cnt = 0;
|
|
_irrx.cnt = 0; //ir key message started
|
|
return;
|
|
}
|
|
|
|
_irrx.cmd >>= 1;
|
|
_irrx.cnt++;
|
|
if (tmrcnt == 2) { //Bit time of 1.125ms(0) or 2.25ms(1)
|
|
_irrx.cmd |= 0x8000;
|
|
}
|
|
|
|
if (_irrx.cnt == 16) {
|
|
_irrx.addr = _irrx.cmd; //save address data
|
|
} else if (_irrx.cnt == 32) {
|
|
//got ir key message
|
|
if ((rt_uint8_t)_irrx.cmd > 96) {
|
|
_irrx.cmd = NO_KEY;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void timer3_init(void)
|
|
{
|
|
rt_hw_interrupt_install(IRQ_IRRX_VECTOR, irrx_isr, RT_NULL, "irrx_isr");
|
|
TMR3CNT = 0;
|
|
TMR3PR = TMR3_RCLK*110 - 1; //110ms Timer overflow interrupt
|
|
TMR3CON = BIT(8) | BIT(7) | BIT(5) | BIT(2) | BIT(1) | BIT(0); //capture & overflow interrupt enable, falling edge, Capture Mode
|
|
}
|
|
|
|
static void _irrx_hw_init(void)
|
|
{
|
|
GPIOEDE |= BIT(6);
|
|
GPIOEPU |= BIT(6);
|
|
GPIOEDIR |= BIT(6);
|
|
FUNCMCON2 |= 0xf << 4;
|
|
FUNCMCON2 |= (7 << 4); // timer3 G6 PE6 capture
|
|
rt_memset(&_irrx, 0, sizeof(_irrx));
|
|
|
|
timer3_init();
|
|
}
|
|
#endif
|
|
|
|
static int ab32_irrx_init(void)
|
|
{
|
|
_irrx_hw_init();
|
|
LOG_D("irrx init success");
|
|
return RT_EOK;
|
|
}
|
|
INIT_BOARD_EXPORT(ab32_irrx_init);
|
|
|
|
#endif
|