160 lines
5.0 KiB
C
160 lines
5.0 KiB
C
/**
|
|
*****************************************************************************
|
|
* @file cmem7_gpio.h
|
|
*
|
|
* @brief CMEM7 GPIO header file
|
|
*
|
|
*
|
|
* @version V1.0
|
|
* @date 3. September 2013
|
|
*
|
|
* @note
|
|
*
|
|
*****************************************************************************
|
|
* @attention
|
|
*
|
|
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
|
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
|
* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
|
|
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
|
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
|
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
|
*
|
|
* <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2>
|
|
*****************************************************************************
|
|
*/
|
|
|
|
#ifndef __CMEM7_GPIO_H
|
|
#define __CMEM7_GPIO_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "cmem7.h"
|
|
#include "cmem7_conf.h"
|
|
|
|
/** @defgroup GPIO_GROUP
|
|
* @{
|
|
*/
|
|
typedef enum {
|
|
GPIO_GROUP_GPIO,
|
|
} GPIO_GROUP;
|
|
|
|
#define IS_GPIO_GROUP(GROUP) (((GROUP) == GPIO_GROUP_GPIO))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup GPIO_PWM_CHANNEL
|
|
* @{
|
|
*/
|
|
typedef enum {
|
|
GPIO_PWM_CHANNEL_GPIO_31,
|
|
} GPIO_PWM_CHANNEL;
|
|
|
|
#define IS_GPIO_PWM_CHANNEL(CHANNEL) (((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_31))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @brief GPIO initialization
|
|
* @note This function should be called at first before any other interfaces.
|
|
* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
|
|
* @param[in] PositiveTrigger Positive edge interrupt trigger if true, or negative edge
|
|
* @retval None
|
|
*/
|
|
void GPIO_Init(uint8_t Group, uint32_t PositiveTrigger);
|
|
|
|
/**
|
|
* @brief Enable or disable GPIO output in the specific group.
|
|
* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
|
|
* @param[in] Enable each bit indicates if the corresponding GPIO pin
|
|
* in the specific GPIO group is enable or not
|
|
* @retval None
|
|
*/
|
|
void GPIO_EnableOutput(uint8_t Group, uint32_t Enable);
|
|
|
|
/**
|
|
* @brief Enable or disable GPIO interrupt in the specific group.
|
|
* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
|
|
* @param[in] Enable each bit indicates if the corresponding GPIO pin interrupt
|
|
* in the specific GPIO group is enable or not
|
|
* @retval None
|
|
*/
|
|
void GPIO_EnableInt(uint8_t Group, uint32_t Enable);
|
|
|
|
/**
|
|
* @brief Check specific interrupts are set or not
|
|
* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
|
|
* @retval uint32_t each bit indicates if the corresponding GPIO pin interrupt
|
|
* in the specific GPIO group is set or not
|
|
*/
|
|
uint32_t GPIO_GetIntStatus(uint8_t Group);
|
|
|
|
/**
|
|
* @brief Clear GPIO interrupt in the specific group.
|
|
* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
|
|
* @param[in] Clear each bit indicates if the corresponding GPIO pin interrupt
|
|
* in the specific GPIO group is clear or not
|
|
* @retval None
|
|
*/
|
|
void GPIO_ClearInt(uint8_t Group, uint32_t Clear);
|
|
|
|
/**
|
|
* @brief Get value of each GPIO pin in the specific group
|
|
* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
|
|
* @retval uint32_t each bit indicates value of the corresponding GPIO pin
|
|
* in the specific GPIO group
|
|
*/
|
|
uint32_t GPIO_Read(uint8_t Group);
|
|
|
|
/**
|
|
* @brief Set value of each GPIO pin in the specific group
|
|
* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
|
|
* @param[in] Unmask each bit indicates value of the corresponding GPIO pin
|
|
* in the specific GPIO group is set or not
|
|
* @param[in] data each bit indicates value of the corresponding GPIO pin
|
|
* in the specific GPIO group to be set
|
|
* @retval None
|
|
*/
|
|
void GPIO_Write(uint8_t Group, uint32_t Unmask, uint32_t data);
|
|
|
|
/**
|
|
* @brief Initialize PWM for the specific GPIO pin
|
|
* @note It can work before call GPIO_EnableOutput for the specific GPIO pin
|
|
* @param[in] Channel PWM channel, which is a value of @ref GPIO_PWM_CHANNEL
|
|
* @param[in] HighLevelNanoSecond Nanosecond which high level lasts
|
|
* @param[in] LowLevelNanoSecond Nanosecond which low level lasts
|
|
* @retval None
|
|
* @see GPIO_EnableOutput
|
|
*/
|
|
void GPIO_InitPwm(uint8_t Channel, uint32_t HighLevelNanoSecond, uint32_t LowLevelNanoSecond);
|
|
|
|
/**
|
|
* @brief Enable or disable GPIO PWM in the specific channel.
|
|
* @param[in] Channel PWM channel, which is a value of @ref GPIO_PWM_CHANNEL
|
|
* @param[in] Enable The bit indicates if the specific channel is enable or not
|
|
* @retval None
|
|
*/
|
|
void GPIO_EnablePwm(uint8_t Channel, BOOL Enable);
|
|
|
|
|
|
|
|
/**
|
|
xjf 20150324
|
|
|
|
**/
|
|
void GPIO_SetBits(uint32_t mask);
|
|
void GPIO_clrBits(uint32_t mask);
|
|
uint32_t GPIO_getBits(uint32_t mask);
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __CMEM7_GPIO_H */
|
|
|