rt-thread-official/bsp/m16c62p/uart.c

288 lines
7.9 KiB
C

/*
* File : board.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-03-08 Bernard The first version for LPC17xx
* 2010-04-10 fify Modified for M16C
*/
#include <rthw.h>
#include <rtthread.h>
#include "iom16c62p.h"
#include "bsp.h"
#include "uart.h"
#if defined(RT_USING_UART0) && defined(RT_USING_DEVICE)
struct rt_uart_m16c
{
struct rt_device parent;
/* buffer for reception */
rt_uint8_t read_index, save_index;
rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE];
}uart_device;
void u0rec_handler(void)
{
rt_ubase_t level;
rt_uint8_t c;
struct rt_uart_m16c* uart = &uart_device;
while(ri_u0c1 == 0)
;
c = (char) u0rb;
/* Receive Data Available */
uart->rx_buffer[uart->save_index] = c;
level = rt_hw_interrupt_disable();
uart->save_index ++;
if (uart->save_index >= RT_UART_RX_BUFFER_SIZE)
uart->save_index = 0;
rt_hw_interrupt_enable(level);
/* invoke callback */
if(uart->parent.rx_indicate != RT_NULL)
{
rt_size_t length;
if (uart->read_index > uart->save_index)
length = RT_UART_RX_BUFFER_SIZE - uart->read_index + uart->save_index;
else
length = uart->save_index - uart->read_index;
uart->parent.rx_indicate(&uart->parent, length);
}
}
static rt_err_t rt_uart_init (rt_device_t dev)
{
rt_uint32_t level;
/* set UART0 bit rate generator bit rate can be calculated by:
bit rate = ((BRG count source / 16)/baud rate) - 1
Baud rate is based on main crystal or PLL not CPU core clock */
//pclk1 = 1; /// seleck F1SIO
u0brg = (unsigned char)(((CPU_CLK_FREQ/16)/BAUD_RATE)-1); //(N+1)
/* UART Transmit/Receive Control Register 2 */
ucon = 0x00;
/* 00000000
b0 U0IRS UART0 transmit irq cause select bit, 0 = transmit buffer empty
b1 U1IRS UART1 transmit irq cause select bit, 0 = transmit buffer empty
b2 U0RRM UART0 continuous receive mode enable bit, set to 0 in UART mode
b3 U1RRM UART1 continuous receive mode enable bit, set to 0 in UART mode
b4 CLKMD0 CLK/CLKS select bit 0, set to 0 in UART mode
b5 CLKMD1 CLK/CLKS select bit 1, set to 0 in UART mode
b6 RCSP Separate CTS/RTS bit,
b7 Reserved, set to 0 */
/* UART0 transmit/receive control register 0 */
/* f1 count source, CTS/RTS disabled, CMOS output */
u0c0 = 0x10;
/* 00010000
b1:b0 CLK01:CLK0 BRG count source select bits //01 F8SIO
b2 CRS CTS/RTS function select bit
b3 TXEPT Transmit register empty flag
b4 CRD CTS/RTS disable bit
b5 NCH Data output select bit
b6 CKPOL CLK polarity select bit,set to 0 in UART mode
b7 UFORM Transfer format select bit,set to 0 in UART mode */
/* UART0 transmit/receive control register 1 */
/* disable transmit and receive, no error output pin, data not inverted */
u0c1 = 0x00;
/* 00000000
b0 TE Transmit enable bit
b1 TI Transmit buffer empty flag
b2 RE Receive enable bit
b3 RI Receive complete flag
b5:b4 Reserved, set to 0
b6 UOLCH Data logic select bit
b7 UOERE Error signal output enable bit */
/* UART0 transmit/receive mode register */
/* 8-bit data,asynch mode, internal clock, 1 stop bit, no parity */
u0mr = 0x05;
/* 00000101
b2:b0 SMD12:SMD1 Serial I/O Mode select bits
b3 CKDIR Internal/External clock select bit, CKDIR
b4 STPS Stop bit length select bit, STPS
b5 PRY Odd/even parity select bit, PRY
b6 PRYE Parity enable bit, PRYE
b7 IOPOL TxD, RxD I/O polarity reverse bit */
/* clear UART0 receive buffer by reading */
u0tb = u0rb;
/* clear UART0 transmit buffer */
u0tb = 0;
/* disable irqs before setting irq registers */
level = rt_hw_interrupt_disable();
/* Enable UART0 receive interrupt, priority level 4 */
s0ric = 0x04;
/* Enable all interrupts */
rt_hw_interrupt_enable(level);
/* UART0 transmit/receive control register 1 */
/* enable transmit and receive */
u0c1 = 0x05;
/* 00000101 enable transmit and receive
b0 TE Transmit enable bit
b1 TI Transmit buffer empty flag
b2 RE Receive enable bit
b3 RI Receive complete flag
b5:b4 Reserved, set to 0
b6 UOLCH Data logic select bit
b7 UOERE Error signal output enable bit */
return RT_EOK;
}
static rt_err_t rt_uart_open(rt_device_t dev, rt_uint16_t oflag)
{
RT_ASSERT(dev != RT_NULL);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* Enable the UART Interrupt */
}
return RT_EOK;
}
static rt_err_t rt_uart_close(rt_device_t dev)
{
RT_ASSERT(dev != RT_NULL);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* Disable the UART Interrupt */
}
return RT_EOK;
}
static rt_size_t rt_uart_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_uint8_t* ptr;
struct rt_uart_m16c *uart = (struct rt_uart_m16c*)dev;
RT_ASSERT(uart != RT_NULL);
/* point to buffer */
ptr = (rt_uint8_t*) buffer;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
while (size)
{
/* interrupt receive */
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
if (uart->read_index != uart->save_index)
{
*ptr = uart->rx_buffer[uart->read_index];
uart->read_index ++;
if (uart->read_index >= RT_UART_RX_BUFFER_SIZE)
uart->read_index = 0;
}
else
{
/* no data in rx buffer */
/* enable interrupt */
rt_hw_interrupt_enable(level);
break;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
ptr ++;
size --;
}
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
return 0;
}
static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
char *ptr;
ptr = (char*)buffer;
if (dev->flag & RT_DEVICE_FLAG_STREAM)
{
/* stream mode */
while (size)
{
if (*ptr == '\n')
{
while(ti_u0c1 == 0)
;
u0tb = '\r';
}
/* THRE status, contain valid data */
while(ti_u0c1 == 0)
;
u0tb = *ptr;
ptr ++;
size --;
}
}
else
{
while ( size != 0 )
{
/* THRE status, contain valid data */
while(ti_u0c1 == 0)
;
u0tb = *ptr;
ptr++;
size--;
}
}
return (rt_size_t) ptr - (rt_size_t) buffer;
}
void rt_hw_uart_init(void)
{
struct rt_uart_m16c* uart;
/* get uart device */
uart = &uart_device;
/* device initialization */
uart->parent.type = RT_Device_Class_Char;
rt_memset(uart->rx_buffer, 0, sizeof(uart->rx_buffer));
uart->read_index = uart->save_index = 0;
/* device interface */
uart->parent.init = rt_uart_init;
uart->parent.open = rt_uart_open;
uart->parent.close = rt_uart_close;
uart->parent.read = rt_uart_read;
uart->parent.write = rt_uart_write;
uart->parent.control = RT_NULL;
uart->parent.user_data = RT_NULL;
rt_device_register(&uart->parent,
"uart0", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STREAM | RT_DEVICE_FLAG_INT_RX);
}
#endif /* end of UART */
/*@}*/