1520 lines
74 KiB
Markdown
1520 lines
74 KiB
Markdown
# Change Log
|
||
|
||
## [1.6.0] - 2024-06-28:
|
||
|
||
Main changes since 1.5.0
|
||
Tested Segger Embedded Studio Version: 8.10d
|
||
Tested IAR Embedded Workbench for RISC-V Version: 3.30.1
|
||
|
||
### Known Issue:
|
||
- some IAR projects does not work properly when optimization level is increased
|
||
|
||
### Changed:
|
||
- soc: reorganize the directory structure
|
||
- soc: hpm6750: declare get_frequency_for_source API for clock drver header file
|
||
- soc: update soc cmakelists to add b ext info
|
||
- soc: hpm6750: add feature for ioc pad ctrl setting issue
|
||
- soc: toolchains: gcc: correct LMA for NOLOAD sections
|
||
- soc: move eh_frame into separate section
|
||
- boards: hpm6750xxxx apply workaround for E00029.
|
||
- boards: change hpm5301evklite adc16 channel
|
||
- boards: board.h: adc16: add marco BOARD_APP_ADC16_HW_TRIG_SRC_CLK_NAME
|
||
- boards: adjust function position of adc pin initialization
|
||
- boards: hpm6300evk and hpm6e00evk: sdram use px07 as femc dqs pin
|
||
- boards: hpm6e00evk: rename init_sdram_pins to init_femc_pins
|
||
- boards: hpm6e00evk: change board i2c instance to I2C0
|
||
- drivers: can/mcan add parameter check for low-level bit timing.
|
||
- drivers: enet: add bitfield ENET0_RMII_TXCLK_SEL for hpm6300
|
||
- drivers: i2c: add DATACNT high byte process
|
||
- drivers: pwm: update HRPWM process
|
||
- drivers: spi: optimize reading speed for spi_read_data API
|
||
- drivers: spi: add set/get data phase format APIs for spi master
|
||
- drivers: spi: delete the spi startand operation APIs
|
||
- drivers: adc16: remove an unused member conv_duration from adc16_config_t
|
||
- drivers: enet: update for enet_interrupt_enable_t
|
||
- drivers: mcan reduce unnecessary register access in mcan_read_rxfifo.
|
||
- drivers: mtg: add calculate function param clock
|
||
- drivers: mtg: add several calculate functions
|
||
- drivers: mcan lookeup the mcan msg ram base via mcan_soc_msg_buf variable if the MSG_BUF is in AHB RAM.
|
||
- drivers: adc16: disable improvement logic of adc16 for continuous sampling maximum voltage
|
||
- drivers: mcan improve transmitter delay compensation setting logic.
|
||
- drivers: femc: rename data_width_in_byte to cmd_data_width
|
||
- drivers: femc: update ns2cycle() to align up
|
||
- drivers: common: add packed attribute
|
||
- drivers: femc: delete duplicate config
|
||
- drivers: mtg: change the default parameters to the low order filter
|
||
- drivers: adc16: add API adc16_set_seq_hw_trigger_enable()
|
||
- drivers: spi : convert enumeration return in that gets parameters APIs
|
||
- drivers: pwm: add fault recovery code.
|
||
- driver: pwm: change pwm trig time
|
||
- components: enet_phy: dp83867/rtl8211: move the macro definition RGMII to board-level CMakeLists.txt
|
||
- components: eeprom_emulation: Add ATTR_RAMFUNC for all function
|
||
- components: eeprom_emulation: add power-off protection mechanism.
|
||
- components: dma_mgr: add burst in fixed transfer size and swap feature
|
||
- components: spi: add full_duplex and half_duplex operating APIs
|
||
- components: spi: support 1 to 32 bits width transfer for nonblocking APIs
|
||
- components: usb: device: support iso transfer mult feature
|
||
- middleware: hpm_sdmmc add emmc sleep & wakeup function.
|
||
- middleware: tinyusb: ehci: support chain transfer
|
||
- middleware: threadx: add low power support
|
||
- middleware: cherryusb: update for advance descriptor
|
||
- middleware: hpm_sdmmc: optimized to support multiple cards
|
||
- middleware: cherryusb/tinyusb/usbx: enable suspend isr
|
||
- middleware: FreeRTOS: update to 202210.01 lts
|
||
- middleware: cherryusb: update to v1.3.0
|
||
- middleware: freertos: modify missed timer count num
|
||
- middleware: freertos: update IAR port file
|
||
- middleware: freertos: delete fence operations
|
||
- middleware: freertos: make the calculation more simple.
|
||
- middleware: hpm_sdmmc add cache control macro.
|
||
- middleware: hpm_sdmmc: improve the logic for detecting CMD23 support.
|
||
- middleware: freertos: add tickless stop mode support
|
||
- middleware: freertos: add user custom process function call
|
||
- middleware: hpm_mcl_v2: add hpm smc control.
|
||
- middleware: freertos: place xPortxxx to isr_vector section
|
||
- middleware: hpm_math: add dsp support for zcc
|
||
- middleware: microros: add zcc support
|
||
- middleware: rtos: asm adjustment for zcc toolchain
|
||
- middleware: hpm_mcl_v2: add pwm dead area compensation.
|
||
- middleware: hpm_mcl_v2: add dq axis decoupling function
|
||
- middleware: cherryusb: add macro USBH_USE_CUSTOM_ISR/USBD_USE_CUSTOM_ISR
|
||
- middleware: lvgl: upgrade to v9
|
||
- middleware: lvgl: rewrite the scissor.
|
||
- middleware: lvgl: upgrade allocate algorithm for draw_buf.
|
||
- samples: rdc: remove unused dac driver in sample
|
||
- samples: lwip/netxduo/modbus: add conditional compile for reference clock setting in RMII mode
|
||
- samples: audio_codec: common: change FIL_SEARCH_NUM from 10 to 20
|
||
- samples: dhyrstone: surpress build warnings
|
||
- samples: dhrystone Optimize performance.
|
||
- samples: coremark Optimize performance.
|
||
- samples: drivers: spi: interrupt: transmission optimization. The transmission will start after the configuration is completed.
|
||
- samples: adapt spi components to drive and move to the samples dir for spi sdcard samples
|
||
- samples: cherryusb: device: change descriptor string to HPMicro
|
||
- samples: cherryusb: device: use advanced descriptor to support high/full speed
|
||
- samples: rename jpeg to image
|
||
- samples: drivers: sdxc: sd_fatfs: add card hotplug support
|
||
- samples: cherryusb: host: usbnet: replace block to noblock for read terminal char
|
||
- samples: cherryusb: host: usbnet: decrease lwip MEM_SIZE
|
||
- samples: cherryusb: move host hid info print code to thread
|
||
- samples: audio_codec: refactoring code
|
||
- samples: spi: dma: SPI master transmission optimization
|
||
- samples: mtg: make the open_loop_trajectory sample more readable
|
||
- samples: drivers: adc16: add some misc optimization
|
||
- samples: drivers: adc16: add pwmv2 support
|
||
- samples: motor_ctrl: bldc_foc_hw: remove hardware control
|
||
- samples: drivers: mcan add tips for the usage of tdc.
|
||
- samples: vglite: update rtos config file to fit gptmr tickless mode
|
||
- samples: lwip/modus/netxduo: add a function call to get the enet default interrupt config
|
||
- samples: sdm: using pwm to provide clock for sdm sensor.
|
||
- samples: spi_components: half_duplex: updated to support 1 to 32bits width transfer
|
||
- samples: spi_components: full_duplex: updated to support 1 to 32bits width transfer
|
||
- samples: add freertos tickless stop mode sample
|
||
- samples: benchmark: update compile options for zcc
|
||
- samples: drivers: adc16: optimize the process logic of sequence and preemption
|
||
- samples: drivers: sei: device: tamagawa: update eeprom cmd
|
||
- samples: adc12: optimization for trigger mux and trigger frequency settings
|
||
- samples: sei: device: tamagawa: support EEPROM protocol
|
||
- samples: mcl: add pwm dead area compensation.
|
||
- samples: motor_ctrl: add dq axis decoupling function
|
||
- samples: cherryusb: move dual_port samples to dual_port folder
|
||
- samples: cherryusb: adapter to cherryusb v1.3.0
|
||
- samples: drivers: adc12/adc16/dac: support abort feature in interactive terminal
|
||
- samples: lwip: lwip_iperf: support abort feature to reselect the test mode
|
||
- samples: lwip: common: multiple: add definitions of remote ip addresses for iperf
|
||
- samples: motor_ctrl: bldc_lvlg_foc: add lvgl v8.3.5 for this demo
|
||
- samples: tinyusb: uac2: support full speed
|
||
- samples: power_mode_switch: update readme
|
||
- samples: cherryusb: uac2: change default samplerate order
|
||
- samples: bldc_foc: update bldc_foc_angle_align() for hardware loop
|
||
- cmake: toolchain: add ar option to remove timestamp
|
||
- cmake: toolchain: suppress output while querying spec
|
||
- cmake: lld: update link option for zcc
|
||
- cmake/scripts/soc: support b ext convertion to tools
|
||
- cmake: sdk_app_src_glob: modify to recursive
|
||
|
||
### Fixed:
|
||
- soc: update USE_NONVECTOR_MODE defined used
|
||
- soc: initialize .fast_ram.* section
|
||
- soc: iar linker: fix safe stack init
|
||
- soc: add missing ptmr clock
|
||
- soc: hpm6880: fix get_frequency_for_i2s error
|
||
- soc: hpm6880: Modify the value of SPI_SOC_FIFO_DEPTH from 4 to 8. for hpm_soc_feature.h
|
||
- soc: toolchain: iar fix iar ram_stress issue in ram_debug build.
|
||
- boards: hpm5301evklite: fixed can't output work for gptmr samples such as pwm_generate
|
||
- drivers: enet: fix the clearing of DMA PBL setting
|
||
- drivers: dma: fix dma_clear_transfer_status() API
|
||
- drivers: sdxc Fix timeout calculation issue and DMA enabling logic.
|
||
- drivers: adc16: fix the logic of adc16_set_pmt_queue_enable() when the parameter enable is false
|
||
- drivers: mbox: fix error that BEIE can't be operated by interface
|
||
- drivers: spi: fixed assignment value error for spi_set_clock_phase and spi_set_clock_polarity APIs
|
||
- drivers: lcdc: fix ST and DMA_ST clear api.
|
||
- drivers: mipi_dsi: fix MIPI_DSI_FMT_RGB565 config.
|
||
- drivers: spi: fixed assignment error issue for enable/disable address phase APIs
|
||
- drivers: i2c: fix return value type of i2c_get_data_count()
|
||
- components: usb device/enet_phy: fix unwanted files in localize folder
|
||
- components: panle: fix panel timing.
|
||
- components: eeprom_emulation: demo flash crashed.
|
||
- middleware: cherryusb: ehci: delete timeout clear before give sem
|
||
- middleware: uC/OS-III: modify fpu context save&restore
|
||
- middleware: cherryusb: fix freertos enter/exit critical
|
||
- middleware: audio_codec: fix hpm_wav_decode() single channel pbuf data
|
||
- middleware: mclv2: fix andes toolchain compiler error.
|
||
- middleware: cherryusb: fix ehci_qh_pool init miss busid for v1.3.0
|
||
- middleware: lwip: apps: lwiperf: fix the bug of failing to restart iperf in TCP/UDP server mode
|
||
- middleware: tinyusb: fix _usbd_dev.speed error to support full speed
|
||
- middleware: hpm_mcl_v2: fix uncontrolled after large changes in motor speed.
|
||
- samples: dhyrstone: fix build issue for release type using nds toolchain
|
||
- samples: lwip: lwip_tcpclient: fix TCP commnuication error after DHCP enabled
|
||
- samples: lwip: lwip_tcpclient_freertos_socket: fix connection error before IP assigned from DHCP
|
||
- samples: correct cmsis_os2/mem_pool project name
|
||
- samples: multicore: common Fix SDP memcpy blocking issue in ram_build.
|
||
- samples: lwip: lwip_tcpecho_xxx_rtthread_nano: fix failing to get IP by DHCP serivice
|
||
- samples: spi_sdcard: fixed the place section name error issue
|
||
- samples: cherryusb: audio: fix wm8960 codec volume max value
|
||
- samples: img: jpeg_decode: fix decode when only one qtab exist.
|
||
- samples: tflm: mlperf: remove unnecessary codes.
|
||
- samples: fix cherryusb mic no sound error
|
||
- samples: spi_components: polling: fixed doesn't work for polling samples
|
||
- samples: tamagawa: fix delay times is zero.
|
||
- samples: bldc_foc: fix hardware_foc position loop error
|
||
- cmake: link ndsgcc itf for application
|
||
- cmake: localize_sdk: use utf-8 as default encoding
|
||
- cmake: ide: keep preprocessing definition
|
||
|
||
### Added:
|
||
- soc: add zcc toolchain support
|
||
- soc: clock_driver Add clock_set_wdg_source API.
|
||
- soc: gcc linker: add fast_ram.init section size overflow check
|
||
- soc: add FreeRTOS vector mode support
|
||
- soc/board: add HPM6E80 support
|
||
- drivers: common: add macros for .fast_ram.*
|
||
- drivers: enet: add an API enet_get_default_interrupt_config
|
||
- drivers: enet: add MII mode support
|
||
- drivers: common add api for converting tick to us or ms.
|
||
- drivers: pllctlv2 add new API to configure PLL.
|
||
- drivers: uart: add uart_modem_write_rts_pin API
|
||
- drivers: uart: add get/clear addr match flags APIs such as addr_match, addr_match_idle, data_lost
|
||
- drivers: add lobs drivers
|
||
- drivers: usb: add some APIs for low power future usage drivers: spi: add spi_slave_set_user_status API
|
||
- drivers: usb: add suspend/resume APIs
|
||
- drivers: usb: add enter/exit lower power suspend APIs
|
||
- drivers: spi: add read SPI RX/TX FIFO size APIs
|
||
- drivers: usb: add usb_set_port_test_mode() API
|
||
- drivers: sdp add new apis.
|
||
- drivers: mcan add new api for canceling pending transmission.
|
||
- drivers: mtg: add get&clear event irq interface
|
||
- drivers: qeiv2: add oneshot mode
|
||
- drivers: add clc driver
|
||
- drivers: add vsc driver
|
||
- drivers: spi: add get/set shift direction APIs
|
||
- drivers: uart: add an new API uart_try_receive_byte()
|
||
- drivers: pixelmux: add api that set mipi dsi date type.
|
||
- drivers: gptmr: add monitor function APIs
|
||
- drivers: gptmr: add opmode APIs
|
||
- drivers: gptmr: add qeimode APIs
|
||
- components: add i2s_over_spi
|
||
- components: codec: add wm8978
|
||
- components: enet_phy: add jl1111 driver
|
||
- components: add ppi components
|
||
- components: touch: add gt9271 driver.
|
||
- components: debug_console: add a new API console_try_receive_byte()
|
||
- middleware: add lodepng
|
||
- middleware: add minimp3
|
||
- samples: cherryusb: device: add WinUSB 1.0 and WinUSB 2.0 samples
|
||
- samples: lwip: add LPI interrupt mask setting
|
||
- samples: add i2s_emulation sample
|
||
- samples: lvgl_audio_player: support mp3 decoder
|
||
- samples: uart: add uart_rx_line_status sample
|
||
- samples: add half_duplex samples for spi_components
|
||
- samples: add full_duplex samples for spi_components
|
||
- samples: drivers: sdxc: emmc add new sameple for eMMC sleep & awake.
|
||
- samples: drivers: add lobs sample
|
||
- samples: drivers: spi: sd/sd_fatfs: support DMA transfer
|
||
- samples: threadx: add low power mode sample
|
||
- samples: image: add png encoder sample
|
||
- samples: image: add png decoder sample
|
||
- samples: audio_codec: add decoder_mp3 sample
|
||
- samples: ppi: add parallel adc sample
|
||
- samples: ppi: add async_sram sample
|
||
- samples: qeov2: add wave_out sample
|
||
- samples: qeov2: add abz_out sample
|
||
- samples: pwm: add async fault demo
|
||
- samples: motor_ctrl: add hardware foc
|
||
- samples: drivers: pwmv2: add pwmv2 pair waveform
|
||
- samples: dmav2: add dmav2_fixed_burst_swap sample
|
||
- samples: qeiv2: add oneshot mode sample
|
||
- samples: add smix_dao sample.
|
||
- samples: add ecat_io sample.
|
||
- samples: cherryusb: add one host and one device dual port sample
|
||
- samples: add pwm/hrpwm fault mode
|
||
- samples: lwip: add lwip_iperf_multi_ports
|
||
- samples: drivers: tsw: add a tsn_switch sample
|
||
- cmake: add symbol HPM_BUILD_TYPE to specify build type
|
||
- docs: add generated cmake_intro.rst
|
||
- docs: getting started: add zcc support related information
|
||
|
||
## [1.5.0] - 2024-03-29:
|
||
|
||
Main changes since 1.4.0
|
||
|
||
Tested Segger Embedded Studio Version: 7.32a
|
||
Tested IAR Embedded Workbench for RISC-V Version: 3.20.1
|
||
|
||
### Known Issue:
|
||
- some IAR projects does not work properly when optimization level is increased
|
||
|
||
### Changed:
|
||
- soc: iomux: update macro prefix in pmic_iomux and batt_iomux.
|
||
- soc: feature: change usb endpoint max number from 8 to 16
|
||
- soc: correct svd files and add subpart module list
|
||
- drivers: usb: change usb_phy_get_line_state() to external function
|
||
- drivers: qeiv2: update filter length setting
|
||
- drivers: adc12/adc16: add sanity check for sample cycle
|
||
- drivers: femc: add delay_cell_disable config option
|
||
- drivers: i2s: change fifo threshold parameter.
|
||
- drivers: i2c: replace and use the macro definition of hpm_soc_ip_feature.
|
||
- drivers: uart: supplementary description of uart_check_status API.
|
||
- components: enet_phy: lan8720/rtl8201/rtl8211: unify the default config with type bool
|
||
- components: enet_phy: remove unused included header file
|
||
- components: enet_phy: rtl8201/rtl8211: update register description
|
||
- components: dma_mgr: change isr handler from static to public
|
||
- middleware: tinyusb: host: use echi drivers
|
||
- middleware: tinyusb: rename CFG_TUSB_HOST_DEVICE_MAX to CFG_TUH_DEVICE_MAX
|
||
- middleware: tinyusb: update to v0.16
|
||
- middleware: rtthread-nano: use soc reset_handler and define MAIN_ENTRY as entry
|
||
- middleware: fatfs: tinyusb: adapter to tinyusb update
|
||
- middleware: threadx: use TX_TIMER_TICKS_PER_SECOND to config work ticks
|
||
- middleware: threadx: use samples tx_user.h
|
||
- middleware: uC/OS-III: enable sw interrupt in OSCtxSw/OSIntCtxSw
|
||
- middleware: ucos: ports: Added IAR portable layer for ucos.
|
||
- middleware: cherryusb/azure_rtos: add defined __ICCRISCV__ for iar
|
||
- middleware: hpm_math: simplify libdsp path.
|
||
- middleware: cherryusb: update to v1.1.0
|
||
- middleware: rtthread-nano:halt cpu when exception occur.
|
||
- middleware: hpm_math: simplify libnn path.
|
||
- middleware: threadx: move frequently called function to ram.
|
||
- middleware: tinyusb: change endpoint number from 8 to 16
|
||
- middleware: usbx: change endpoint number from 8 to 16
|
||
- middleware: cherryusb: msc device: update to support multi lun and deinit
|
||
- middleware: eclipse_threadx: update license
|
||
- middleware: fatfs: tinyusb: add osal_task_delay() when use rtos wait
|
||
- middleware: tinyusb: update CMakeLists.txt and delete custom osal_task_delay()
|
||
- middleware: tinyusb: add debounce in port change isr
|
||
- samples: erpc: add middleware src use middleware CMakeLists.txt
|
||
- samples: multicore: core1: use board_init_core1() API
|
||
- samples: multicore: coremark: delete custom reset_handler and use app_main as MAIN_ENTRY
|
||
- samples: tinyusb: update samples to adapter tinyusb v0.16
|
||
- samples: usbx: host: delete unused hpm_usb_host.h
|
||
- samples: usb: delete CONFIG_USB_HOST set
|
||
- samples: lvgl_coremark: disable freqswitch_btn when coremark running
|
||
- samples: mono: move to driver directory.
|
||
- samples: freertos: change configMAX_PRIORITIES from 7 to 32
|
||
- samples: rtthread: delete unused macro RT_THREAD_PRIORITY_32
|
||
- samples: cherryusb: usbnet: decrease rtos stack config size
|
||
- samples: lwip: all: unify logs about IP information
|
||
- samples: lwip: lwip_https_server: remove an unused file
|
||
- samples: lwip: all: update DHCP progress logic
|
||
- samples: lwip: common: remove s_pxNetIf
|
||
- samples: lwip: adjust the directories of netconf.c/netcof.h
|
||
- samples: lwip: common: optimize speed for getting IP from DHCP server
|
||
- samples: lwip: rename common_lwip.c to common.c
|
||
- samples: lwip: common: adjust the call logic of netif_set_up/netif_set_down
|
||
- samples: lwip: common: change the time of invoking netif_user_notification
|
||
- samples: lwip: common: rename user_notification to netif_user_notification
|
||
- samples: lwip: adjust directory structures to be compatible with single and multiple network ports
|
||
- samples: use generate_ide_projects for new samples
|
||
- samples: cherryusb: device: cdc acm: reorganize directory structure
|
||
- samplse: gptmr: t_shape_accel_decel: modify the source address mode of DMA.
|
||
- samples: cherryusb: device: change readbuf size from 2048 to CDC_MAX_MPS
|
||
- samples: drivers: femc: update sdram dqs config
|
||
- samples: update app.yaml to use ip_feature
|
||
- samples: drivers: uart: change to app uart
|
||
- samples: audio_codec: update wm8960 I2S protocol.
|
||
- samples: drivers: cam: change cam sample to cam_dvp sample.
|
||
- samples: usbx: device: msc: decrease ram disk size to 16KB
|
||
- samples: cherryusb: msc device: update to support multi lun
|
||
- samples: driver: uart_lin: support LIN transceiver on board.
|
||
- samples: adc: temp: rename temp to adc16_temperature
|
||
- samples: bldc block: Compatible with both hall and qeiv2 peripherals.
|
||
- samples: motor_ctrl: Modify the value of pwm reload.
|
||
- samples: lwip: common: single/multiple: update the size passed into sys_mbox_new()
|
||
- samples: lwip: common: single/multiple: replace enet_get_link_status with netif_is_link_up
|
||
- samples: lwip: lwip_https_server: remove unused header file
|
||
- samples: lwip: rename macro TCP_XXX_PORT
|
||
- samples: lwip: add cmake flag for netconn/socket api
|
||
- samples: decode_wav: sd_fafts: update sd_choose_music.
|
||
- samples: power_mode_switch: maintain xpi0 clock on switching preset
|
||
- samples: dhrystone Change the optmization level to O3.
|
||
- samples: tinyusb: hid_generic_inout: delete redundant image
|
||
- samples: power_mode_switch: hpm67/hpm63: preserve femc clock at wait/stop mode
|
||
- samples: erpc: core1: use optimization -os
|
||
- samples: update uart_tamagawa to use software trig if TRGM not exist.
|
||
- samples: eeprom_emulation: reduce management area
|
||
- samples: sdxc: use block_size instead of 512
|
||
- samples: erpc: add -fno-exceptions compile option
|
||
- samples: tinyusb: disable debug log print
|
||
- boards: hpm5300evk and hpm6800evk: add delay after USB_PWR Pin init for power stable
|
||
- boards: hpm6750evkmini: modify gptmr pins.
|
||
- boards: hpm6200evk: modify gptmr pins.
|
||
- boards: hpm6200evk: modify the i2c pins.
|
||
- boards: hpm6750xxx: update sdram dqs config
|
||
- boards: hpm6800evk:pinmux Increase drive strength for sdxc pins
|
||
- boards: iomux: update macro prefix for pmic_iomux and batt_iomux.
|
||
- boards: rename board feature
|
||
- boards: update BOARD_APP_UART definition
|
||
- boards: rename console definitions
|
||
- boards: hpm5301evklite: update uart clock in board.c.
|
||
- boards: hpm6750evkmini: change BOARD_GPTMR_PWM_DMA_SRC definition.
|
||
- docs: samples: use glob in high level readme.
|
||
- docs: update top level readme.
|
||
- docs: netxduo: update sntp readme.
|
||
- docs: threadx: update threadx hello readme.
|
||
- docs: lwip: align pictures to the left
|
||
- docs: pip: add cmake doc dependency
|
||
- docs: add changelog to sphnix-doc.
|
||
- scripts: ses: generate asm after build by default.
|
||
- scripts: update linked project path logic.
|
||
- scripts: check_board_cap.py: check ip feature's availability
|
||
- cmake: remove CMP0116 setting.
|
||
- cmake&scripts: clarify the error caused by core1 compiling failure.
|
||
- scripts: ses/iar: use relpath in project file
|
||
|
||
### Added:
|
||
- soc: hpm6360/hpm6750/hpm6800: add MAC-related definitions in OTP section
|
||
- soc: reset: add MAIN_ENTRY macro to custom define main entry
|
||
- soc: add hpm6850 and hpm6830 part.
|
||
- soc: soc_modules.list: add tamper drivers
|
||
- soc: Add IAR toolchain support.
|
||
- soc: add ip feature to soc_modules.list
|
||
- soc: add hpm_soc_ip_feature.h
|
||
- soc: driver: ppor: add reset hold operation APIs
|
||
- soc: clock_driver add the clock_get_divider API.
|
||
- soc: sysctl: add apis to control clock preservation
|
||
- soc: toolchains: gcc: ram linker: add ILM last address overflow check
|
||
- drivers: mcan Add timeout counter support.
|
||
- drivers: tamper: add tamper driver
|
||
- drivers: cam: add cam_update_buffer2 API
|
||
- drivers: opamp: Add user configuration code.
|
||
- drivers: lcdc: add stride for layer config.
|
||
- drivers: pdma: add pdma_blit_ex.
|
||
- drivers:pllctl add out-of-bound check in pllctl driver.
|
||
- components:uart_lin: add hpm_uart_lin_send_wakeup() API
|
||
- components: enet_phy: add LAN8720 driver
|
||
- components: enet_phy: add definition of enet_phy_link_status_t
|
||
- middleware: cherryusb: host: add dual port support
|
||
- middleware: cmsis_os2: adapter to rtthread wrapper
|
||
- middleware: cmsis_os2: update freertos files
|
||
- middleware: cmsis_os2: adapter to threadx wrapper
|
||
- middleware: cmsis_os2: adapter to ucOS-III wrapper
|
||
- middleware: hpm_sdmmc Add eMMC config partition API.
|
||
- middleware: cherryusb Add IAR toolchain support
|
||
- middleware: erpc Fix IAR RISC-V support issue
|
||
- middleware: tflm: add IAR riscv support in flatbuffer
|
||
- middleware: FreeRTOS: portable:Added IAR portable layer.
|
||
- middleware: segger_rtt Added EWRISCV support
|
||
- middleware: hpm_math Add nds_dsp library for IAR.
|
||
- middleware: lwip: cc: add PACK_STRUCT_XXX definitions for IAR platform
|
||
- middleware: uC/OS-III: enable plicsw in IAR asm code
|
||
- middleware: add tinyengine
|
||
- middleware: threadx: add support for gptmr.
|
||
- middleware: threadx: add profile support.
|
||
- middleware: add agile_modbus.
|
||
- middleware: add cherryrb.
|
||
- middleware: cherryusb Add missing swap32/swap16 implementation.
|
||
- middleware: hpm_mclv2: add block type drive motors
|
||
- middleware: cherryusb: fix usbh_core ep0 buffer index
|
||
- boards: hpm6200xxx and hpm6750xxx: add board_init_core1() API
|
||
- boards: add tamper feature and pins init
|
||
- boards: hpm5300evk: add board_init_console() declaration in board.h
|
||
- boards: hpm6750evk/hpm6750evk2: add board_dual_usb feature
|
||
- boards: openocd: add windows guide to *_all_in_one.cfg
|
||
- boards: openocd: soc: add reset_soc proc
|
||
- board:add pgpio configuration on hpm5301evklite
|
||
- samples: drivers: add mono sample.
|
||
- samples: drivers:mcan Add timeout counter sample.
|
||
- samples: drivers: tamper: add tamper sample
|
||
- samples: cmsis_os2: blinky: add rtthread samples
|
||
- samples: cmsis_os2: add msg_queue sample
|
||
- samples: cmsis_os2: add mem_pool samples
|
||
- samples: cmsis_os2: msg_queue: add ucOS-III support
|
||
- samples: cmsis_os2: blinky: add ucOS-III support
|
||
- samples: lwip: common: add a task netif_update_link_status
|
||
- samples: lwip: add MAC address load from OPT MAC area
|
||
- samples: cherryusb: device: cdc acm: add cdc_acm_uart_com sample
|
||
- samples: cherryusb: device: add msc sdcard sample
|
||
- samples: tinyengine: add person detection.
|
||
- samples: rtos: add threadx gptmr sample.
|
||
- samples: modbus: tcp: add tcp samples.
|
||
- samples: modbus: rtu: add rtu sample.
|
||
- samples: add cherryrb sample.
|
||
- samples: cherryusb: host: add dual port sample
|
||
- samples: cherryusb: device: add dual port sample
|
||
- samples: cherryusb: device: add dual lun msc sample
|
||
- samples: lwip: ports: rtthread-nano: multiple: add arch-related files
|
||
- samples: lwip: ports: freertos: multiple: add arch-related files
|
||
- samples: lwip: common: multiple: osal: add osTaskFunction definition
|
||
- samples: lwip: add a lwip_tcpecho_multi_ports_rtthread-nano sample
|
||
- samples: lwip: add a lwip_tcpecho_multi_ports_freertos
|
||
- samples: lwip: lwip_tcpecho_xxx: add definitions for task priorities
|
||
- samples: lwip: lwip_tcpecho_freertos_socket: newly add
|
||
- samples: lwip: lwip_tcpclient: newly add
|
||
- samples: lwip: add lwip_tcpclient_freertos_socket
|
||
- samples: vglite: add sample of rotate tiger.
|
||
- samples: lwip: lwip_tcpclient_freertos_socket: fix failure to run
|
||
- samples: lwip: lwip_tcpclient: fix failure to run with some release-related type
|
||
- samples: jpeg: jpeg_encode: add debounce for button.
|
||
- docs: add cmake doc
|
||
- docs: hpm5300evk: add qeiv2 sin/cos pins
|
||
- scripts: support sdk project localization.
|
||
- cmake: add nds-gcc options to sdk_lib for nds-gcc.
|
||
- cmake/scripts: add IAR project generation support
|
||
- cmake: add symbols to specify linker for tools.
|
||
- cmake: add sdk_*_src_glob.
|
||
- cmake: add custom targets for localization.
|
||
|
||
### Fixed:
|
||
- soc: hpm6750: fix segger linker vectors order
|
||
- soc: hpm_interrupt.h Fix compiling warning for DSP related macros
|
||
- soc: hpm6750: otp Fix OTP program and read logic
|
||
- soc: hpm6880: clock Fix wrong enum value for TSNS clock.
|
||
- soc: clock driver: correct the clock name value for pll clocks.
|
||
- soc: HPM6280: fix adc/dac clock setting
|
||
- soc: ppor: fix ppor clear reset flag and set reset type API error
|
||
- soc: HPM6880: fix i2s clock config driver
|
||
- drivers: adc12: fix calibration setting error
|
||
- drivers: cam: DMASA_FB2 need to be assigned whether FB2 buffer is enable or not.
|
||
- drivers:can correct the logic of disabling re-transmission for ptb & stb.
|
||
- drivers: qeo: fix driver error
|
||
- drivers: i2s: ensure valid BCLK before call software reset.
|
||
- drivers: pdma: fixed OUT_PS[] config.
|
||
- components: wm8960: invert LRCLK to align with soc I2S.
|
||
- middleware: uC/OS-III: fix register t0 unsafe.
|
||
- middleware: ptpd: fix netShutdown error in ptpd initialization
|
||
- middleware: cmsis_os2: task should call exit interface before exit
|
||
- middleware: threadx: fix threadx profile RA register save and restore bug.
|
||
- middleware: hpm_mcl: fix divide-by-zero error. refs: hpm_sdk-#1091
|
||
- middleware: cherryusb/tinyusb/usbx: device: fix transfer_len not reset
|
||
- middleware: cherryusb/usbx: fix dtd return problem
|
||
- middleware: cherryusb/tinyusb/usbx: fix usb device interrupt should be check active status
|
||
- middleware: tinyusb: fix ehci cap_reg address error
|
||
- middleware: tinyusb: fix hid report id
|
||
- middleware: cherryusb: fix usbd_ep_close not reset ep_enable flag
|
||
- middleware: cherryusb: fix rndis message length check
|
||
- middleware: freertos: fix implementation error in xPortIsInsideInterrupt.
|
||
- boards: hpm6200evk: fix tamper pin config
|
||
- board: openocd: all_in_one: hpm6800 config file is missed.
|
||
- boards: openocd: all_in_one: hpm5300: correct soc config name.
|
||
- samples: threadx hello: fix printing errors.
|
||
- samples: drivers: ad12/adc16: fix initialization sequence for trigger source, trigger mux and trigger target config
|
||
- samples: lwip: lwip_ptp: fix netSend error before link-up
|
||
- samples: dma: fix dma uart init position
|
||
- samples: drivers:spi:master_trans_large_amound_of_data Fix logic error if SPI support 4GB transfer size
|
||
- samples: sdxc: add boundary protection for last 1024 blocks test
|
||
- samples: lwip: common: multiple: fix typo of enet_update_dhcp_state()
|
||
- samples: lwip: common: single/multiple: fix timeout passed into sys_arch_mbox_fetch()
|
||
- samples: e2prom: bugfix: base read fail if run perf firstly .refs:hpm_sdk-#1499
|
||
- samples: modbus: tcp: use volatile to prevent the compiler from optimizing out key variables
|
||
- samples: modbus: rtu: fixed failed to run after turning on optimization issue.
|
||
- samples: power_mode_switch: hpm68xx: fix ddr access issue for wait/stop mode
|
||
- samples: cherryrb: fixed stack overflow issue
|
||
- samples: lwip: lwip_tcpecho_multi_ports_ports_rtthread-nano: fix failure to run
|
||
- sample: jpeg: jpeg_encode: fix that udisk can't be mounted when first capture.
|
||
- cmake: correct board search path symbol for core1.
|
||
- cmake: gcc: fix system include path.
|
||
- cmake: fix sdk_link_libraries failed to link std lib.
|
||
- cmake: EXTAR_LD_FLAGS to be added as ld options.
|
||
- docs: lwip_ptp: v1: salve: fix format error
|
||
- docs: samples: ppor: change title from sysctl to ppor
|
||
- docs: hpm6750evk2: fix table display error
|
||
|
||
## [1.4.0] - 2023-12-29:
|
||
|
||
Main changes since 1.3.0
|
||
|
||
Tested Segger Embedded Studio Version: 7.32
|
||
|
||
### Changed:
|
||
- soc: hpm5301: add hpm5301
|
||
- soc: hpm6880: add hpm6880
|
||
- soc: HPM6750: pcfg: update dcdc dcm mode config
|
||
- soc: clock driver: update clock_set_source_divider() and clock_get_source()
|
||
- boards: add hpm5301evklite
|
||
- boards: add hpm6800evk
|
||
- boards: update clock_set_source_divider() to use clk_src_t type param
|
||
- boards: hpm6750evkmini: use the same uart port as core1 for some samples.
|
||
- drivers: dao: update driver support new feature on hpm6800
|
||
- drivers: adc16: update comment about cal_avg_cfg in calibration
|
||
- drivers: qeiv2: change adc trigmux name x to 0 and y to 1
|
||
- drivers: femc: add overflow protect to time config
|
||
- drivers: mcan Enlarge the range of CAN_EVENT_ERROR.
|
||
- components: serial_nor: add subdirectory in cmakelists
|
||
- middleware: cherryusb: update to v0.10.2
|
||
- middleware: cherryusb: rename host and device isr
|
||
- middleware: FreeRTOS: xPortIsInsideInterrupt() using CSR_MSCRATCH
|
||
- middleware:hpm_sdmmc Enhanced all speed modes support for SD and eMMC.
|
||
- middleware: usbx: device: support chain transfer
|
||
- samples: cherryusb: host: rndis: integrate dhcp thread into ping thread for host rndis ping and iperf sample
|
||
- samples: adc: temp: add isr for temp out of thresholds
|
||
- samples: drivers: acmp: optimization for comparing input voltage
|
||
- samples: lwip: add DHCP macro definition in CMakeLists.txt
|
||
- samples: lwip_ptp: enable DHCP feature in PTP samples
|
||
- samples: drivers: qeiv2: update API for adc-qeiv2 pin initialization
|
||
- samples: bldc_foc: change adc buffer size from 40 words to 48 words
|
||
- samples: remove explicitly c++ standard setting.
|
||
- samples: driver: cam: set default cmake build type
|
||
- samples: lwip: update to Class C static IP adress
|
||
- samples: tinyuf2: remove unnecessary cache ops.
|
||
- samples: lwip: lwip_tcpecho_freertos: optimization for API call in a thread-safe way
|
||
- samples: lwip: lwip_ptp: v1: slave: update static ip
|
||
- samples: lwip: optimize DHCP enable logic
|
||
- samples: lwip: opts: adjust the allocation strategy of memory pool
|
||
- samples: lwip: lwip_iperf: adjust MEM_SIZE for saving memory consumption
|
||
- samples: lwip: lwip_tcpecho_multi_ports: update the second IP with C class
|
||
- samples: enet: optimization for PHY selections
|
||
- samples: dma: update uart rx circle transfer buffer size
|
||
- samples: drivers: sdxc/emmc Correct doc for emmc sample.
|
||
- cmake: sdk_link_libraries link libraries for supported tools.
|
||
- cmake: add project name for hpm_sdk sub directory.
|
||
- cmake: decouple CMAKE_BUILD_TYPE and linker script.
|
||
- cmake: ses: remove -Ox from gcc option list.
|
||
- cmake: set default c++ standard to c++11.
|
||
- Update CONFIG_HAS_xxx to HPMSOC_HAS_xxx.
|
||
- segger: enable all warnings.
|
||
- segger: release: release optimization level use cmakelist config
|
||
- scripts: ses: set intermediate dir in project file.
|
||
- docs: remove quick start guide from top level readme
|
||
- docs: change doc structure.
|
||
|
||
### Added:
|
||
- soc: HPM5361: add trgm filter shift length feature
|
||
- soc & drivers: hpm5300: add DMAMUX_SOC_WRITEONLY and TRGM_SOC_HAS_DMAMUX_EN features
|
||
- drivers: lcb: add lcb driver.
|
||
- drivers: sdxc add more APIs for timing and power control.
|
||
- drivers: mipi_csi: add mipi csi.
|
||
- drivers: cam: add cam_stop_safely API
|
||
- components: usb: device: add dtd chain transfer
|
||
- components: panel: enable panel component.
|
||
- components: camera: ov5640: add mipi interface.
|
||
- middleware: rtthread-nano: add v3.1.5
|
||
- middleware: rtthread-nano: add FPU support.
|
||
- middleware: tinyusb: device: update to support chain transfer
|
||
- middleware: cherryusb: device: update to support chain transfer
|
||
- middleware: vglite: add 4.0.49.
|
||
- middleware: cherryusb: add USB_OSAL_WAITING_FOREVER for sem and mq use
|
||
- middleware: add hpm_mcl_v2
|
||
- middleware: lwip: add ptpd v1 & v2
|
||
- middleware: cmsis_os2: add source files.
|
||
- samples: mcl: add step motor.
|
||
- samples: lwip: lwip_ptp: v2: support IEEE1588 V2
|
||
- samples: cherryusb: add audio_v2_mic_speaker_rtthread sample
|
||
- samples: cherryusb: host: add hid and msc rtthread samples
|
||
- samples: cherryusb: host: usbnet: add support ec20 module sample.
|
||
- samples: cmsis_os2: add blinky sample.
|
||
- samples: driver: mipi_csi: add mipi_csi.
|
||
- samples: mcan Support MCAN4-7 loopback testing.
|
||
- cmake: support custom output file name.
|
||
|
||
### Fixed:
|
||
- soc: fix cache maintenance at startup
|
||
- soc: hpm53xx Correct exip API tree offset.
|
||
- soc: toolchain: missing .fast.* in gnu ld linker script.
|
||
- soc: fix tbss and tdata section not initialized.
|
||
- soc: sysctl: sysctl_enable_group_resource() should be check LOC_BUSY
|
||
- soc: hpm5300 Correct Cache size and Cacheline size.
|
||
- boards: hpm6750evkmini Fix the issue that eMMC is still 3.3V even 1.8V is selected.
|
||
- boards: hpm5301evklite correct jlink script device number.
|
||
- components: camera: power_up is enable by default for ov5640/ov7725.
|
||
- docs: samples: drivers: add numberic index.
|
||
- drivers/soc: fix build warning
|
||
- drivers: i2c: add slave device response judgment for master read/write APIs
|
||
- drivers: opamp: fix opamp vssa connect error.
|
||
- drivers: pllv2: fix pllctlv2_pll_is_stable() API
|
||
- drivers: qeiv2: fix invalid argument check
|
||
- drivers: dac: fix the upper limit value setting for DAC_OUTPUT
|
||
- drivers: jpeg: fix pixel format index for out buffer.
|
||
- drivers: uart: fix not support oversample 32 for rx idle detection on hpm5300
|
||
- middleware:ftafs Fix SD card init crash.
|
||
- middleware: mcl: fix path plan error.
|
||
- middleware: hpm_sdmmc Fix the issue that IO initialization work unstable on HPM6300.
|
||
- middleware: hpm_sdmmc Fix voltage switch setting issue for SD and eMMC.
|
||
- middleware: hpm_sdmmc Fix the PWR and VSEL IO initiaization issue. refs:hpm-sdk-#863
|
||
- samples: sei: fix nikon sample crc calc error.
|
||
- samples: cherryusb: msc device: add pre-format fat12 file system in u disk
|
||
- samples: adcx: replace const with a macro for ADC sample cycle
|
||
- samples: tinyusb:fix the usb host pin init.
|
||
- samples: motor_ctrl: bldc_littlevgl_foc: program crash.
|
||
- samples: qeiv2: uvw: fix uninitialized pointer usage
|
||
- samples: cherryusb: fix semaphore give in isr
|
||
- samples: drivers: Fix the issue that can error example may block.
|
||
- samples: uart_irq: fix unable to limit receive large than buffer size.
|
||
- samples: drivers:sdxc:emmc remove infinite loop for emmc initialization.
|
||
- samples: drivers: i2s: fix tx underflow during tx start
|
||
- samples: lwip: lwip_tcpecho_multiple_ports: fix no echo data when receiving large amounts of data
|
||
- samples: mcl: pwm duty set error.
|
||
- samples: cherryusb: host: usbnet: fixed when performing a stress test with a large amount of iperf data, will send fai.
|
||
- samples: cherryusb: audio_v2_mic_speaker_rtthread: fix mic no voice problem
|
||
- samples: jpeg_decode: add delay after usb pins init for waiting power stable
|
||
- samples: hfi: hpm6750evk2: fix the motor shake.
|
||
- cmake: segger: remove workstation specific path info.
|
||
- cmake/soc: fix heap/stack size setting for andes toolchain.
|
||
- cmake: ses: correct device name for core1.
|
||
|
||
## [1.3.0] - 2023-09-28:
|
||
|
||
Main changes since 1.2.0
|
||
|
||
Tested Segger Embedded Studio Version: 7.32
|
||
|
||
### Changed:
|
||
- boards: hpm6200evk/hpm6300evk: delete unwanted clock_ahb div set
|
||
- boards: hpm6750xxx: switch dcdc work mode to dcm mode
|
||
- docs: sdk: boards: hpm6750evk2: add pps pin information
|
||
- component: wm8960: support sysclk pre-divider
|
||
- components: serial_nor: add serial nor flash.
|
||
- openocd: probes: ft2232: remove trst and srst config.
|
||
- ip: cam：remove 0x5c MAX_WN_CYCLE register in regs.h
|
||
- driver: cam: remove invalid register
|
||
- drivers: i2s: update API
|
||
- drivers: adc: adc12/adc16: rename adc16_get_busywait to adc16_is_nonblocking_mode
|
||
- drivers: adc: adc12/adc16: update adcx_init API
|
||
- drivers: pllctrl: update pllctrl drivers
|
||
- drivers: spi : add spi enable and disable datamerge
|
||
- drivers: spi : add spi_set_address_len API
|
||
- drivers: pdgo Add missing APIs
|
||
- drivers: uart: update uart rx idle flag process and fifo control
|
||
- soc: delete_unnecessary_ppor_reset_bit_field
|
||
- soc: hpm_gpiom_soc_drv.h: delete gpiom_gpio_t soc name
|
||
- soc: delete DMA_SOC_BUS_NUM Macro
|
||
- soc: pcfg: update pcfg SCG_CTRL related drivers
|
||
- soc: hpm6750:startup Enable LMM1 clock before access to LMM1
|
||
- soc: gcc ld: add memory used size check
|
||
- middleware: cherryusb: update to v0.10.1
|
||
- middleware: guix: demo adapts to 800 * 480 resolution
|
||
- middleware: guix: improve demo display performance
|
||
- middleware: cherryusb: update for midi descriptor define
|
||
- middleware: cherryusb: update for midi
|
||
- samples: drivers: adc: adc12/adc16: speed optimization for oneshot reading
|
||
- samples: drivers: adc: adc12/adc16： update API call used for nonblocking judgement
|
||
- samples: drivers: adc: adc12/adc16: update API call related to blocking setting in oneshot mode
|
||
- samples: drivers: adc: adc12/adc16: reduce the input parameters of init_trigger_target function
|
||
- samples: drivers: adc: adc12/adc16: update init_oneshot_config
|
||
- samples: drivers: adc: adc12/adc16: optimization for clearing interrupt status
|
||
- samples: drivers: pwm: Add pwm clock jitter demo
|
||
- samples: cherryusb: hid host: separate mouse and keyboard urb
|
||
- samples: hrpwm: Add demo for updating hrpwm frequency
|
||
- samples: drivers:mcan Add CAN error handling and refined logic.
|
||
- samples: mbx: move dualcore mbx sample to multicore folder
|
||
- samples: cherryusb: update for v0.10.1
|
||
- samples: motor_ctrl: bldc smc: gcc toolcahin enable fpu.
|
||
- samples: lwip: lwip_tcpecho_freertos: optimization in a thread-safety way
|
||
- samples: qeo: update qeo abz frequency configuration
|
||
- samples: gptmr: add sent_signal sample.
|
||
- samples: lwip: lwip_ptp: remove the dependency on pps0 pinout
|
||
- samples: dma_manager: update for use dma_mgr_setup_channel()
|
||
- samples: drivers: gptmr: pwm_measure: support use dma
|
||
- samples: lwip: lwip_httpsrv/lwip_https_server: rename project names for uniform naming
|
||
- samples: multicore: lvgl_coremark: delete custom linker files and using andes toolchain
|
||
- samples: flash_algo: update device size.
|
||
- samples: cherryusb: host: hid: use ep_mps to fill urb
|
||
|
||
### Added:
|
||
- cmake: ses: support specify custom openocd board cfg file.
|
||
- cmake: support specifying minimum sdk version in app.yaml.
|
||
- boards: add hpm5300evk
|
||
- components: eeprom_emulation: add hpm nor-flash support
|
||
- components: eeprom_emulation: add eeprom emulation component
|
||
- soc: add APIs for get or set sysctl resource status
|
||
- drivers: common: add HPM_ALIGN_DOWN and HPM_ALIGN_UP define
|
||
- drivers: adc: ad12/adc16: add adcx_set_blocking_read/adcx_set_nonblocking_read
|
||
- drivers: add encoder position driver
|
||
- drivers: lcdc: add enable/disable background in alpha blender.
|
||
- drivers: usb: add api to set dp/dm pin pulldown resistance
|
||
- drivers: spi: add spi_get_rx_fifo_valid_data_size and spi_get_tx_fifo_valid_data_size APIs
|
||
- drivers: spi: add directIO function APIs
|
||
- drivers: enet: add rx resume API
|
||
- drivers: adc16: add resolution setting in adc16_get_default_config API
|
||
- drivers:rtc Add rtc_get_timeval API.
|
||
- drivers:mcan Add mcan_transmit_via_txfifo_nonblocking API.
|
||
- drivers: usb: add usb_hcd_set_power_ctrl_polarity() API
|
||
- drivers: plb: add plb drivers
|
||
- drivers: linv2: add linv2 driver
|
||
- drivers: sei: add sei driver
|
||
- drivers: dmav2: add dmav2 driver
|
||
- drivers: qeo: add qeo driver
|
||
- drivers: qeiv2: add qeiv2 driver
|
||
- drivers: mmc: add mmc driver
|
||
- drivers: rdc: add rdc driver
|
||
- drivers: add opamp driver
|
||
- drivers: bgpr: add related APIs for bgpr
|
||
- middleware: FreeRTOS: add xPortIsInsideInterrupt() API
|
||
- middleware: threadx: add definition automatically when enable traceX
|
||
- middleware: freeRTOS: add use gptmr to generate interrupt
|
||
- middleware: hpm_mcl: add hfi
|
||
- samples: drivers: adc: adc12/adc16: add wdog feature
|
||
- samples: add opamp demo
|
||
- samples: cherryusb: rndis: host: add iperf sample.
|
||
- samples: cherryusb: rndis: host: add ping sample.
|
||
- samples: drivers: adc: adc12/adc16: add hw trigger configuration in sequence mode
|
||
- samples: eeprom_emulation: add eeprom emulation perf test sample
|
||
- samples: eeprom_emulation: add base api demo
|
||
- samples: tracex: add demo for traceX usage
|
||
- samples: cherryusb: add audio_v1_mic_speaker_midi sample
|
||
- samples: cherryusb: add midi device sample
|
||
- samples: drivers: sei: add sei samples
|
||
- samples: drivers: plb: add plb demo
|
||
- samples: drivers: mmc: add mmc demo
|
||
- samples: drivers: qeiv2: add qeiv2 demo
|
||
- samples: drivers: qeo: add qeo demo
|
||
- samples: drivers: dmav2: add dmav2 demo
|
||
- samples: drivers: linv2: add linv2 demo
|
||
- samples: drivers: rdc: add rdc demo
|
||
- samples: drivers: pdgo Add PDGO samples
|
||
- samples: drivers: ewdg Add EWDG sample
|
||
- samples: lwip: add a lwip_tcpecho_multi_ports sample
|
||
- samples: motor_ctrl: add hfi
|
||
|
||
### Fixed:
|
||
- cmake: fix segger default heap and stack size config
|
||
- cmake: fix add_subdirectory_ifdef arg processing.
|
||
- doc: boards: hpm6300evk: fix acmp pin info.
|
||
- boards: hpm6750evkmini: fix board_init_rgb_pwm_pins() problem
|
||
- boards: hpm6200evk: fix BOARD_G_GPIO_CTRL defined in wrong position
|
||
- openocd: hpm6750-dual-core: fix expression warning.
|
||
- component: wm8960: fix clock tolerance process
|
||
- soc: toolchains: segger: block tls add with fixed order
|
||
- soc: toolchain: gcc: fix Thread-Local Storage problem
|
||
- soc: segger linker files: fix heap and ctors initialize
|
||
- soc: fix interrupt complete operation
|
||
- soc: pcfg: fix DCDC_PROT[OVERLOAD_LP] bit access
|
||
- soc: ip: adc12: fix ADC12 threshold setting
|
||
- soc: HPM6750: fix clock setting and frequency obatining error
|
||
- soc: HPM6360: fix clock source definitions for ADC16
|
||
- soc: HPM6280: fix clock source definitions for ADC16
|
||
- soc: HPM6360: fix obtaining clock source error for DAC
|
||
- soc: HPM6280: fix obtaining clock source for DAC
|
||
- drivers: adc16: add bus mode enable control APIs
|
||
- drivers: adc16: fix ahb setting
|
||
- drivers: cam: clear the status of CAM should not affect other bits
|
||
- drivers: trgmux: filter function can't work.
|
||
- drivers: src: adc16: fix end count setting
|
||
- drivers: adc/dac: fix interrupt status clearing
|
||
- drivers: adc16: fix DMA access format
|
||
- drivers: sdm: fix over sample rate and signal sync problem
|
||
- drivers: pwm: fix pwm xcmp enable setting
|
||
- drivers: pwm: correct external fault polarity setting.
|
||
- drivers: pwm: add update hrpwm reload shadow api
|
||
- drivers: spi: fix can't set change data_bits use spi_set_data_bits API
|
||
- drivers: ptpc: fix ptpc_clear_irq_status API issue.
|
||
- drivers: i2c: fix i2c_clear_status API issue.
|
||
- drivers: gptmr: fix gptmr_clear_status API issue.
|
||
- middleware: erpc: rpmsg_lite: fix platform_in_isr() error
|
||
- middleware:hpm_sdmmc Fix the issue sdsc cards are not supported.
|
||
- middleware: threadx: fix D extend asm code error
|
||
- samples: usbx: add multi devices and hot plug support
|
||
- samples: motor_ctrl: fix adc trig invalidate.
|
||
- samples: lwip: fix TCP reception error when size over 2KB
|
||
- samples: lwip: DHCP failure in lwip_tcpecho_freertos
|
||
- samples: drivers: adc: adc12: fix the status flag judgement in isr process
|
||
- samples: rgb_led: fix cmp shadow error
|
||
- samples: gptmr: pwm_generate: fix inaccurate duty in high frequency
|
||
- samples: lwip: low_level_input: fix the network storm issue
|
||
- samples: timer_basic: fix inconsistent use of defines
|
||
- samples: drivers: adc: adc16: fix the bit of interrupt status clearing in sequence mode
|
||
- samples: power_mode_switch: trigger system lowpower for standby mode
|
||
- samples: touch_panel: fix error data when 5 fingers touch screen at same time.
|
||
- samples: jpeg: jpeg_decode: fixed lcd display is tore when decoder is running
|
||
- samples: jpeg: jpeg_decode: malloc out of memory on gcc
|
||
- samples: drivers:can Fix abnormal behavior on can error sample.
|
||
- samples: segger_rtt: call board_init_clock.
|
||
- samples: drivers: acmp: fix one toggle value but multi toggle pulses
|
||
- samples: lwip_tcpecho_freerstos: fix code stuck with gcc toolchain
|
||
- samples: jpeg: fix JPEG_USE_UDISK compile error
|
||
- samples: bldc_foc: fix input value range.
|
||
- samples: cherryusb: rndis: udp_echo: fix echo extra char
|
||
- samples: usbx: fix global var placement
|
||
- samples: power_mode_switch: set to preset_1 after exiting wait mode.
|
||
- samples: pla: fix pla first pulse abnormal.
|
||
- samples: plb: fix the first pulse is abnormal.
|
||
|
||
## [1.2.0] - 2023-06-30:
|
||
|
||
Main changes since 1.1.0
|
||
|
||
Tested Segger Embedded Studio Version: 7.22
|
||
|
||
### Changed:
|
||
- boards: hpm6750evk*: decrease core frequency from 816MHz to 648MHz
|
||
- openocd: soc: hpm6280: simplify dual core release core1 approach.
|
||
- cmake: segger: configure optimization level according to gcc level.
|
||
- soc: dmamux: move it from ip to soc
|
||
- soc: interrupt: adjust irq api. #659
|
||
- soc: improve svd file
|
||
- soc: hpm_soc_feature.h: remove ADC16_SOC_TEMP_CH_EN for some specified Socs
|
||
- components: enet_phy: update the common enet phy header file
|
||
- components: sgtl5000 and wm8960: update clock setting
|
||
- drivers: uart: update uart driver
|
||
- drivers: pdma: improve quality of scale
|
||
- drivers: adc: adjust wait_dis type in adc16_config_t struct
|
||
- drivers: enet: update rmii reference clock setting API for ENET
|
||
- utils: hpm_swap: escape for andes toolchain.
|
||
- middleware: hpm_sdmmc: add spi sdcard
|
||
- middleware: motor_ctrl: change the file organization
|
||
- middleware: motor_ctrl: remove slide control content from foc
|
||
- middleware: lvgl: upgrade to v8.3.5 (with pdma)
|
||
- middleware: lvgl: Add direct mode
|
||
- middleware: cherryusb: update version to v0.8.0
|
||
- samples: I2S_DMA and I2S Interrupt: update sample behavior
|
||
- samples: cherryusb: hid host: separate mouse and keyboard urb
|
||
- samples: cherryusb: increase max interface and endpoint number Configuration
|
||
- samples: cherryusb: uac2: move setting sampling freq to isr
|
||
- samples: cherryusb: audio: update descriptor for identification
|
||
- samples: audio_codec: set codec voice to max and increase irq priority
|
||
- samples: multicore: lvgl_coremark: delete custom linker files and using andes toolchain
|
||
- samples: lvgl_audio_player: update CMakeLists.txt to using noncacheable framebuffer
|
||
- samples: spi: clean the redundant code
|
||
- samples: i2c: improve the processing of FIFO in ISR
|
||
- samples: drivers: uart: update uart_rx_timeout demo
|
||
- samples: drivers: gptmr: split sample into multiple function samples
|
||
- samples: drivers: adc: optimization for all macro definitions in applications
|
||
- samples: drivers: adc: update struct member names
|
||
- samples: update clock divider setting for ADC-related examples
|
||
- samples: cherryusb: move vid/pid etc definition to usb_config.h
|
||
- samples: cherryusb: device: update vid to hpmicro 0x34B7
|
||
- samples: cherryusb: change API update for v0.8
|
||
- samples: cherryusb: device: audiov1: change to full speed mode
|
||
- samples: tinyusb: uac2: update descriptor and sample
|
||
- samples: lwip: disable mmc interrupt settings
|
||
- samples: lwip: lwip_ptp: v1: sync precision improvement
|
||
|
||
### Added:
|
||
- cmake: toolchains: add isa spec 20191213 support.
|
||
- cmake: ses: support set ses raw option in CMakeLists.txt
|
||
- cmake: add option to specify board search path.
|
||
- cmake: generate compile_commands.json file
|
||
- soc: hpm_soc_feature: add a common macro for ADC12 and ADC16
|
||
- drivers: cam: add new APIs
|
||
- drivers: spi: add new APIs
|
||
- drivers: i2c: add new APIs
|
||
- drivers: I2S: add i2s_check_data_line_status API
|
||
- drivers: dma: add dma_set_transfer_src_width_byte_size() API
|
||
- drivers: gptmr: add output capture APIs
|
||
- drivers: gptmr: add gptmr_channel_get_dma_request_event api
|
||
- drivers: adc: add adc16_trigger_pmt_by_sw API
|
||
- drivers: enet: add some APIs related to interrupt settings
|
||
- drivers: enet: add a new API for transmisstion
|
||
- drivers: usb: add macro CONFIG_USB_DEVICE_FS to set full speed mode
|
||
- components: uart_lin: add uart lin component
|
||
- components: add smbus
|
||
- components: add sccb
|
||
- middleware: lvgl: add macro HPM_LVGL_FRAMEBUFFER_NONCACHEABLE
|
||
- middleware: add AzureRTOS (threadx/usbx/netx/guix)
|
||
- middleware: hpm_mcl: sensorless over-zero
|
||
- middleware: add smc
|
||
- middleware: hpm_sdmmc Add eMMC support
|
||
- middleware: hpm_math: add bit conversion function
|
||
- middleware: add uC/OS-III
|
||
- middleware: cherryusb: audio: add feedback descriptor
|
||
- middleware: cherryusb: audio: add param to set endpoint bmAttributes
|
||
- middleware: microros: add microros foxy sources
|
||
- samples: drivers: spi: add spi_sdcard_fatfs sample
|
||
- samples: drivers: spi: add sd sample
|
||
- samples: add uart_lin
|
||
- samples: motor_ctrl: sensorless: over-zero demo
|
||
- samples: cherryusb: add rndis host dhcp samples
|
||
- samples: drivers: sdxc :emmc Added eMMC sample
|
||
- samples: drivers: adc12: update irq pattern for sequence usage
|
||
- samples: drivers: pla: add pla tamagawa demo
|
||
- samples: drivers: gptmr: add counter_sync sample
|
||
- samples: drivers: gptmr: add timer_basic sample
|
||
- samples: drivers: gptmr: add t_shape_accel_decel sample
|
||
- samples: drivers: dma/gptmr: add trigger dma transfer using gptmr event sample
|
||
- samples: drivers: uart add uart_rx_timeout sample
|
||
- samples: i2c: add smbus samples
|
||
- samples: lwip: lwip_tcpecho_freertos: add self-adaption
|
||
- samples: cherryusb: hid host: move usbh_submit_urb() out of condition
|
||
- samples: cherryusb: add composite freertos sample
|
||
- samples: cherryusb: add rndis freertos sample
|
||
- samples: cherryusb: add msc freertos sample
|
||
- samples: cherryusb: add audio v2 mic speaker freertos sample
|
||
- samples: cherryusb: add hid mouse freertos sample
|
||
- samples: cherryusb: add hid keyboard freertos sample
|
||
- samples: cherryusb: add cdc acm freertos sample
|
||
- samples: cherryusb: add rndis tcp server sample
|
||
- samples: cherryusb: add rndis device udp_echo sample
|
||
- samples: cherryusb: add rndis device http_server sample
|
||
- samples: cherryusb: device: add audio_v2_speaker_sync sample
|
||
- samples: add several uC/OS-III samples
|
||
- samples: smc: add smc demo
|
||
- samples: microros: add subscriber, sevice and publisher
|
||
- samples: uC/OS-III: mutex
|
||
|
||
### Fixed:
|
||
- cmake: ses: fix __SEGGER_RTL_vfprintf issue with nds tool in SES 7.20.
|
||
- soc: hpm6280: Modify the number of PWM cmps.
|
||
- soc: reset.c: __dso_handle needs to be declared for nds toolchain.
|
||
- soc: fix max buffer length in sequence mode for ADC
|
||
- soc: HPM6750: enet soc drv: fix set clock delay settings
|
||
- soc:hpm6360:sdxc Correct clock divider settting issue
|
||
- drivers: pla: missing Union Field
|
||
- drivers: spi: fix the problem of CMD and ADDR configuration order
|
||
- drivers: i2c: fix clock frequency error rate problem
|
||
- drivers: i2c: clear CMPL bit in API to avoid blocking the trans
|
||
- drivers: i2c: fix i2c slave device read and write fail
|
||
- drivers: i2c: fix read data unexpected multi transition.
|
||
- drivers: i2c: fix w1c clear status error
|
||
- driver: usb: fix w1c clear flag error
|
||
- drivers: gptmr: fix dma request enum definition
|
||
- drivers: adc: fix logics for judging the validity of arguments
|
||
- component: uart_lin: fix break signal problem
|
||
- middleware: cherryusb: fix buffer size error
|
||
- middleware: lvgl: fix fbbuffer option
|
||
- samples: gptmr: fix pwm_measure sample compile waring
|
||
- samples: jpeg: fix interchange format of exif support
|
||
- samples: jpeg: fix jpeg decode
|
||
- samples: drivers: spi: fix the problem of CMD and ADDR configuration order
|
||
- samples: drivers: mcan: can_fd loopback test setting is incorrect
|
||
- samples: cherryusb: http_server_freertos: fix printf content error
|
||
- samples: cherryusb: audio: change endpoint attributes for support MACBOOK
|
||
- samples: tinyusb: msc: increase block numbers for windows format
|
||
- samples: lwip: lwip_httpsrv: fix reload or refresh error
|
||
|
||
## [1.1.0] - 2023-03-31:
|
||
|
||
Main changes since 1.0.0
|
||
|
||
Tested Segger Embedded Studio Version: 7.10
|
||
|
||
### Changed:
|
||
- docs: add new docs for rtd project.
|
||
- soc: ip: enet: update the enet register file
|
||
- soc: ip: adc16: update the adc16 header file
|
||
- soc: hpm_romapi - Add APIs for configuring remapping, exip regions
|
||
- drivers: enet: improve APIs related to PPS
|
||
- drivers: adc: change adc bus blocking interface
|
||
- drivers: adc: optimize getting oneshot result
|
||
- drivers: src: update the default config for ADC12&ADC16
|
||
- boards: rename board-level APIs related to enet
|
||
- components: enet_phy: rtl8201: update the register file
|
||
- middleware: hpm_math: update dsp version
|
||
- middleware: erpc: update to v1.10.0
|
||
- samples: uart: rename uart_dma_rx_idle to uart_software_rx_idle
|
||
- samples: uart: add hardware rx idle detection sample
|
||
- samples: multicore: erpc: core1 add sdk_compile_options(-O1)
|
||
- samples: drivers: gptmr: update sample output.
|
||
- samples: lwip: common: arch: ethernetif: update a calling function name
|
||
- samples:drivers: adc: optimize oneshot handler
|
||
|
||
### Added:
|
||
- arch: add FPU related APIs
|
||
- soc/board: add HPM6280 support
|
||
- soc: HPM6750: acmp: add ACMP section
|
||
- components: add mt9m114 support
|
||
- drivers: add raw8 pixel format support
|
||
- drivers: csr - Implement CSR driver
|
||
- drivers: adc: adc16: support resolution setting
|
||
- drivers/samples: add SDM/PLA/CRC/MCAN
|
||
- drivers: I2C: add new API
|
||
- drivers: adc: adc16: support resolution setting
|
||
- drivers: enet: add enet control config for transmission
|
||
- middleware: cherryusb: audio: update class driver and demo template
|
||
- middleware: add mbedtls lib files with SDP acceleration
|
||
- freeRTOS: add support for static allocation
|
||
- samples: drivers: enet: add a pps demo
|
||
- samples: cherryusb: add audio samples
|
||
- samples: add the resolution parameter in all demos with ADC16
|
||
- samples: add rfft demo
|
||
- sampels: i2c: add interrupt b2b samples
|
||
- samples: drivers: i2s: add an i2s_master demo
|
||
- samples: drivers: i2s: add an i2s_slave demo
|
||
- samples : rom_api : add sw_gm_api filter
|
||
- samples: add the resolution parameter in all demos with ADC16
|
||
|
||
### Fixed:
|
||
- openocd: hpm6300evk: update sdram initialization.
|
||
- drivers: trgmux: trigmux edge filter setting error
|
||
- drivers: enet: fix register access error
|
||
- drivers: adc16: fix the config error of ADC16_CONFIG1
|
||
- drivers: i2c: fix i2c timing configuration
|
||
- drivers: SPI: fix SPI status API
|
||
- drivers: fix gptmr cmp value don't minus one
|
||
- drivers: mcan: correct the mcan ext_id filter issue
|
||
- drivers: I2C: fix issue in i2c_master_address_read API
|
||
- drivers: Self_ACK cannot be set in CAN driver
|
||
- drivers: rtc rtc_config_alarm always return error code
|
||
- cmake: correct source code compilation
|
||
- soc: toolchain: gcc: initialize heap for SES
|
||
- soc: gcc linker files: add NOLOAD keyword to noncacheable.bss section
|
||
- soc: HPM6360: gcc: ld: correct noncacheable region name.
|
||
- drivers: qei: Fix speed display always zero
|
||
- middleware: freertos: disable global irq before vTaskStartScheduler
|
||
- freeRTOS: fix trap when enable float feature
|
||
- freeRTOS: fix tick lost
|
||
- freeRTOS: fix segger project build warning
|
||
- samples: drivers: i2s: fix CFGR config
|
||
- samples: drivers: fix acmp toggle error
|
||
- samples: lwip: fix the DHCP issue
|
||
- samples: uart: fix irq_id judgment
|
||
- samples: fix the order of uart pin configuration and clock configuration
|
||
- samples: update spi dma sample
|
||
- samples: drivers: sysctl: correct reset enable approach.
|
||
- samples: fix dma_general_transfer sample memory out of bounds
|
||
- samples: drivers: wdog: Fix logic issue on finding the nearest interrupt interval
|
||
- sample: audio_codec: decoder_wav: add '\0' to fatfs path
|
||
|
||
## [1.00.0] - 2022-12-31:
|
||
|
||
Main changes since 0.14.0
|
||
|
||
Tested Segger Embedded Studio Version: 7.10
|
||
|
||
### Changed:
|
||
- boards: add version info in banner.
|
||
- board: lcdc: move panel para to board
|
||
- components: spi component to support to transfer different width of data in dma handshake mode
|
||
- drivers: rename dram to femc
|
||
- middleware: cherryusb update to v0.7.0
|
||
- middleware: erpc: update for support rtos
|
||
- middleware: hpm_mcl: update api naming
|
||
- samples: erpc: rename erpc_matrix_multiply_rpmsg to erpc_matrix_multiply_rpmsg_bm
|
||
- samples: erpc: reorganize erpc_matrix_multiply_rpmsg samples
|
||
- samples: erpc: move samples folder to erpc_matrix_multiply_rpmsg
|
||
- samples: update i2c/spi dma channel and dmamux channel definition
|
||
- ses: project template: use demo.* as output file naming.
|
||
- soc: HPM6750: toolchains: update linker files
|
||
- soc: HPM6360: toolchains: update linker files
|
||
|
||
### Added:
|
||
- arch: riscv: add read_clear_csr() API
|
||
- component: add wm8960 support
|
||
- component: add usb device iso transfer support
|
||
- drivers: hpm_common: include hpm_sdk_version.h.
|
||
- drivers: common: add NOP and WFI.
|
||
- drivers: uart: add api to recv/send byte directly.
|
||
- soc: HPM6750 linker files: rename rpmsg_sh_mem to sh_mem
|
||
- cmake: add sdk version header file generation.
|
||
- middleware: tinyusb: add audio class
|
||
- middleware: hpm_math: add NN library
|
||
- samples: erpc: add erpc_two_way_rpc_rpmsg_rtos sample
|
||
- samples: erpc: add erpc_matrix_multiply_rpmsg_rtos sample
|
||
- samples: add power mode switch demo. #282
|
||
- samples: drivers: adc: add a temperature measurement demo
|
||
- samples: drviers: femc: add sram sample
|
||
- samples: lwip demo for FreeRTOS
|
||
- samples: lwip demo of interrupt usage
|
||
- samples: tinyusb: add uac2 demo
|
||
- samples: tflm: add face detection demo
|
||
- samples: tflm: add MLPerf Tiny benchmark demo
|
||
- samples: lwip: common: feature: add a LPI interrupt process
|
||
|
||
### Fixed:
|
||
- drivers:interrupt: Fix FPU context crashing in nested irq case
|
||
- drivers: src: adc: fix adc result in period mode
|
||
- segger: update app directory structure in SES.
|
||
- soc: disable irq during cache maintenance
|
||
- middleware: lvgl: fps calculation to No.
|
||
- samples: get off level based on board api.
|
||
- samples: multicore: hello: core1 rgb led does not change correctly.
|
||
|
||
## [0.14.0] - 2022-10-31:
|
||
|
||
Main changes since 0.13.0
|
||
|
||
Tested Segger Embedded Studio Version: 6.34a
|
||
|
||
### Changed:
|
||
- drivers: inc: update adc driver
|
||
- drivers: gptmr: update reload value
|
||
- components: enet_phy: optimize APIs
|
||
- components: enet_phy: dp83867: rename functions
|
||
- components: conditionally add debug_console
|
||
- middleware: add cherryusb (0.6.0)
|
||
- middleware: littlevgl: update to v8.3.1
|
||
- middleware: fatfs: file name encoding in utf-8
|
||
- middleware: freertos: support nested irq handling
|
||
- middleware: hpm_mcl: Optimized motor control foc speed
|
||
- samples: drivers: dma src move to dma_general_transfer folder
|
||
- samples: lwip: update all static addresses and all gateway addresses
|
||
- samples: lwip: lwip_iperf: optimize the interactive log
|
||
- samples: tinyusb: device: hid_generic_inout: optimize the python script
|
||
- openocd: HPM6750A1 silicon in hpm6750-dual-core.cfg
|
||
- header file: update the enet/conctl register files
|
||
- header file: Update TRGMUX0 pin input source definition
|
||
- header file: update the ADC12 header files
|
||
- scripts: ses: organize file in ses according to real path.
|
||
- cmake: split gcc and ses source
|
||
- board: bump HPM6750 DCDC voltage to 1200mv
|
||
|
||
### Fixed:
|
||
- drivers: pdma: fix scale api issue
|
||
- drivers: i2c: update DATACNT processing
|
||
- drivers: i2s: fix i2s interrupt workaround in i2s_init
|
||
- drivers: pwm: fix pwm capture function error
|
||
- drivers: pwm: fix pwm capture configuration error
|
||
- drivers: clock: fix error in clock_set_xxx_source
|
||
- drivers: wdg: timeout calculation error
|
||
- drivers: trgm_drv: bugfix: include error
|
||
- drivers: romapi: call fencei after flash erase/write operation
|
||
- drivers: watchdog: overflow
|
||
- drivers: usb: host controller initialization issue
|
||
- drivers: i2s: i2s_enable() issue fix
|
||
- middleware: tinyusb: src: class: fix the HID report desc macro
|
||
- samples: drivers: adc: optimize all ADC demos
|
||
- samples: drivers: adc: fix all channel initializations without a default value
|
||
- samples: motor_ctrl: hardware trigger api usage error
|
||
- samples: audio_codec: update clock process for 44100 sample rate
|
||
- samples: lcdc: boundary pixel is incorrenct
|
||
- samples: multicore: BOOT_HEADER was missing in multicore core0 example
|
||
- samples: drivers: i2s: correct audio data if depth < 32bit.
|
||
- samples: hpm_math: fft_perf_test: Fix error printing information
|
||
- samples: fix pdm2dao noise problem
|
||
- samples: lwip: fix the enet throughput degradation
|
||
- soc: correct address overlapping SES XIP linker file
|
||
- soc: correct the interrupt context switch issue
|
||
- soc: fix Lack of interrupt claim for swi
|
||
- boards: fix some rmii reference clock APIs
|
||
|
||
### Added:
|
||
- boards: add hpm6750evk2 support
|
||
- soc: add initfini.c
|
||
- drivers: lcdc: add y8 support
|
||
- drivers: spi: update data_length processing
|
||
- drivers: spi: add api to enable/disable spi dma request
|
||
- drivers: pmp: Add pmp_config_entry API
|
||
- components: add ipc_event_mgr
|
||
- component: spi: add cache maintain
|
||
- middleware: add erpc
|
||
- samples: lwip: support self-adaptive port speed and duplex mode
|
||
- samples: jpeg: support grayscale
|
||
- samples: drivers: spi: use api to get data length
|
||
- samples: drivers: spi: add interrupt b2b sample
|
||
- samples: drivers: mbx: add singlecore samples
|
||
- samples: drivers: add dma circle transfer
|
||
- samples: drivers: pwm: add pwm capture demo
|
||
- samples: provide OTP API demo
|
||
- samples: add cherryusb hid/msc/cdc samples
|
||
- samples: add Guomi API example
|
||
- samples: add erpc sample
|
||
- samples: add segger_rtt
|
||
|
||
## [0.13.0] - 2022-07-31:
|
||
|
||
Main changes since 0.12.1
|
||
|
||
### Changed:
|
||
- drivers: adc: fix sequence and preemption mode
|
||
- drivers: usb: automatically change transceiver type in host mode
|
||
- drivers: pwm: modify the interface for setting the pwm shadow register trigger function
|
||
- drivers: sdxc: driver improvement
|
||
- samples: jpeg demo update
|
||
- samples: motor_ctrl: Optimize motor control performance
|
||
- samples: motor_ctrl: Modify the pwm update method to be hardware triggered
|
||
- samples: audio_codec: wav: Modify the interface
|
||
- samples: audio_codec: add dao support
|
||
- samples: tinyusb: update all USB project names
|
||
- samples: adc: place DMA buffer in noncacheable
|
||
- components: usb: update two struct definitions for the hcd_data_t and the dcd_data_t
|
||
- middleware: littlevgl: update double buffer refresh approach.
|
||
- middleware: fatfs: enable exfat format
|
||
- middleware: fatfs: change 'USB' to lowercase
|
||
- middleware: hpm_math: remove cache operations from the ffa interface
|
||
- scripts: ses: update file path using $(HPM_SDK_BASE)
|
||
|
||
### Fixed:
|
||
- drivers: gpiom: fix spelling errors in API names
|
||
- drivers: enet: fix ptp time offset update
|
||
- drivers: cam: fix store mode configuration
|
||
- drivers: can: Fix the issue can timestamp cannot be enabled
|
||
- drivers: gpio: incorrect return type gpio_get_port_interrupt_flags.
|
||
- middleware: audio_codec: decoder_wav: fix wav codec problem
|
||
- middleware: tinyusb: fix the alignment of _hcd_data
|
||
- soc: driver: clock: i2s get clock error
|
||
- soc: hpm_misc.h: fix incorrect system address mapping.
|
||
- soc: SVD files: fix SDP peripheral reset value problem
|
||
- soc: disable vector mode explicitly.
|
||
- boards: correct device name in ses project
|
||
- board: correct the printf format for frequency and register base
|
||
- python: fix ses project generation on windows
|
||
- samples: adc: fix not working in sequence mode and preemption mode
|
||
- ses: set obj path for common configuration.
|
||
- cmake: ses: put app source into separate category in ses.
|
||
|
||
### Added:
|
||
- components: enet_phy: add rtl8211 driver
|
||
- components: hpm_spi: add initial SPI component
|
||
- components: add DMA Manager
|
||
- drivers: cam: add new API
|
||
- drivers: uart: add uart_set_baudrate API
|
||
- drivers: spi: update dma transfer API
|
||
- samples: tinyusb: host: add a hid demo
|
||
- samples: drivers: spi: add master_trans_large_amount_of_data example
|
||
- samples: decoder_wav: Add support for different bit rates and bits
|
||
- samples: drivers: audio: automatic acquisition of i2s clock frequency
|
||
- middleware: tinyusb: update portable file for USB host
|
||
|
||
## [0.12.1] - 2022-07-01:
|
||
|
||
Main changes since 0.12.0
|
||
|
||
### Fixed:
|
||
- update lwipopt.h for updated enet driver
|
||
|
||
## [0.12.0] - 2022-06-30:
|
||
|
||
Tested with SES 6.32
|
||
|
||
Main changes since 0.11.0
|
||
|
||
### Changed:
|
||
- boards: hpm6360evk has been renamed to hpm6300evk
|
||
- boards: Use CSR_CYCLE in the clock_delay function
|
||
- soc: hpm_soc.h: include hpm_common.h
|
||
- driver: rename hpm_pmu_drv.c to hpm_pcfg_drv.h
|
||
- driver: spi: change to non-blocking interfaces
|
||
- driver: dma: update driver to adapt to different DMA instance constraints
|
||
- components: enet_phy: update dp83867 driver
|
||
- components: enet_phy: remove rtl8211 driver
|
||
- cmake: enable nano newlib by default
|
||
- cmake: move distclean to the beginning
|
||
- middleware: littlevgl enable PDMA by default
|
||
- middleware: tinyusb: upgrade to 0.13.0
|
||
- samples: tinyusb: device: cdc_msc: adjust buffer size
|
||
- samples: drivers: plic: use gpio toggle count as nested irq
|
||
|
||
### Fixed:
|
||
- drivers: pwm: fix function name inconsistency bug
|
||
- drivers: enet: remove "board.h" in enet driver
|
||
- drivers: clock: Fix bugs in hpm6360 clock driver
|
||
- drivers: clock: returns wrong adc/dac clock in HPM6360
|
||
- drivers: dram: failed to configure 8bit mode.
|
||
- freertos: fix issue about running on core1
|
||
- boards: hpm6300evk pmp_entry set initial value
|
||
- middleware: littlevgl: fix pdma cache op issue
|
||
- middleware: littlevgl: fix doxygen markdown for pdma driver
|
||
- middleware: lvgl: ses: update ram linker.
|
||
- middleware: hpm_math: fix ffa cache size error
|
||
- samples: audio_codec: remove the wrong dependency
|
||
- samples: FATFS demo cannot support write/read if FATFS passes unaligned buffer address
|
||
|
||
### Added:
|
||
- samples: add memstress and flash stress
|
||
- drivers: clock: add implement common delay function based on mcycle and mcycleh register
|
||
- boards: add hpm6300evk support
|
||
- boards: hpm6750evkmini: motor control support
|
||
- soc: add svd files
|
||
- middleware: lwip: iperf: enable iperf and add udp function
|
||
- samples: lwip: add lwip_iperf
|
||
|
||
## [0.11.0] - 2022-05-31:
|
||
Main changes since 0.10.0-hpm6360-er
|
||
|
||
### Changed:
|
||
- readme: change the location of the starting document
|
||
- components: change hal_adc_xx to hpm_adc_xx
|
||
- drivers: update the I2C driver
|
||
- cmake: change default rv_arch to rv32imac
|
||
- cmake: modified in a zephyr-compatible way
|
||
- drivers: uart: redefined struct with zephyr
|
||
- cmake: change soc and board name
|
||
- cmake: ses: support enable ext_dsp in project file.
|
||
- samples/tinyusb/host: optimize the toggle rate of the blinking led
|
||
- samples/tinyusb/device: replace mchtimer with board_timer for led_linking_taskk
|
||
- samples/tinyusb/device: optimize the implement of led_blinking_task
|
||
- soc: update IP header and soc header files
|
||
|
||
### Fixed:
|
||
- samples: motor_ctrl: bldc_block: fix some error
|
||
- middleware: hpm_math: fix andes toolchain compile error
|
||
- middleware: hpm_math: fix libdsp.a error
|
||
- middleware: hpm_math: add ext-dsp for SES
|
||
- samples: openocd_algo: fix func_table placement.
|
||
- boards: hpm6360evk: correct cpu frequency
|
||
- boards: fix warning caused by code irregularities
|
||
- boards: LED status is not the same between hpm6750mini rev-A and rev-B
|
||
- boards: update board_led_write.
|
||
|
||
### Added:
|
||
- driver: add spi_setup_dma_transfer() API
|
||
- middleware: hpm_math: add software fft function
|
||
- middleware: hpm_math: add ffa to hpm_math
|
||
- samples: i2c: update the sample b2b
|
||
- samples: hpm_math: add fft_performance demo
|
||
- samples: add SPI DMA sample
|
||
- samples: multicore coremark using debug console only
|
||
- samples: 1588: add ptp v1 master/slave
|
||
|
||
## [0.10.0_hpm6300] - 2022-05-16:
|
||
Main changes since 0.10.0
|
||
|
||
### Changed:
|
||
- ip register header file update
|
||
- ses_proj: using generated complete cpu_regs_xml to replace general cpu registers xml
|
||
- drivers: gpiom: move gpiom_gpio_t into hpm_gpiom_src.h
|
||
- drivers: update the enet driver
|
||
- samples: dram: change sdram test address in dma demo
|
||
- samples: drivers: mbx: exclude flash targets for core0 as well.
|
||
- samples: lwip: update ethernetif.c
|
||
|
||
### Fixed:
|
||
- drivers: ptpc: update ptpc_init_timer_with_initial.
|
||
- drivers: can: bug fix and update
|
||
- soc: correct vector table inclusion and swi name
|
||
- env.sh: fix HPM_SDK_BASE setting problem with msys.
|
||
- samples: sha256_example: failed to run case 13 and 14 with gcc.
|
||
|
||
### Added:
|
||
- soc: add HPM6360 support
|
||
- drivers: add ffa, pllctlv2, dac
|
||
- boards: add hpm6360evk support
|
||
- components: add adcx module
|
||
- components/enet_phy: add the RTL8201 driver
|
||
- samples: drivers: dac, ffa
|
||
- samples: rgb_red: add evkmini ver B support
|
||
|
||
## [0.10.0] - 2022-04-30:
|
||
Main changes since 0.9.0
|
||
|
||
### Changed:
|
||
- drivers: gptmr: split irq enable/disable interface
|
||
- drivers: can: 155 Update SJW setting in CAN driver
|
||
- soc: HPM6750: rename safe stack symbol in link script
|
||
- components: debug_console: wait uart tx flag on writing.
|
||
|
||
### Added:
|
||
- drivers: enet: add 1588 support
|
||
- drivers: can: Add TDC support
|
||
- drivers: mchtmr: add counter init API.
|
||
- drivers: dma: add dma_disable_channel() API
|
||
- middleware: add wav decoder
|
||
- samples: lwip: add ptp demos
|
||
- samples: tinyusb: add msc, cdc demo
|
||
- samples: audio_codec: add wav player demo
|
||
- samples: add tinyuf2 initial support
|
||
- samples: add initial uart dma rx idle demo
|
||
|
||
### Fixed:
|
||
- soc: HPM6750: sysctl: fix cpu lp mode API.
|
||
- drivers: uart: correct baudrate calculation.
|
||
- drivers: usb: fix: no response in device mode when a USB cable is pluged out
|
||
- boards: correct the pin setting related to USB
|
||
|
||
## [0.9.0] - 2022-04-01:
|
||
Main changes since 0.8.0
|
||
|
||
### Changed:
|
||
- drivers: update WDG, UART, DMA, DMAMUX driver
|
||
- drivers: enet remove enet_intf_selection
|
||
- drivers: can: support configure bit timing via low-level bit timing parameters
|
||
- drivers: optimize gpio driver
|
||
- samples: exclude flash targets for mbx core1
|
||
- samples: adjust SES project setting for coremark
|
||
- samples: jpeg: update and integration jpeg decode samples
|
||
- ses: use relpath for linker script in project file
|
||
- ses: add HPM device name in generated project file
|
||
- soc: HPM6750: add an interface selection api
|
||
|
||
### Added:
|
||
- soc: HPM6750: add ram linker for core1
|
||
- ses: support to use Andes toolchain
|
||
- middleware: add hpm_math (replacing hpm_dsp)
|
||
- samples: add lwip httpd
|
||
- drivers: add section and alignment general instructions in hpm_common.h
|
||
|
||
### Fixed:
|
||
- boards: hpm6750evk: fix bldc adc pinmux error
|
||
- boards : hpm6750evk : pinmux : fix spi init pins error
|
||
- samples: sdp: fix non-cacheable data initialization issue
|
||
- samples: littlevgl: fix wrong picture patch in README
|
||
|
||
## [0.8.0] - 2022-03-04:
|
||
All changes since 0.7.3
|
||
|
||
### Changed:
|
||
- rename middleware/sdmmc to middleware/hpm_sdmmc
|
||
- place isr into .isr_vector section for irq non-vector mode
|
||
- change csr functions to support llvm
|
||
|
||
### Fixed:
|
||
- ses: fix issue in register xml
|
||
- freertor: fix trap handler at non-vector mode
|
||
- sdxc: fix software reset issue
|
||
|
||
### Added:
|
||
- add sdk doc
|
||
- add more sample doc
|
||
- add multicore demo
|
||
- i2c/uart: add dma support
|
||
- add tensorflow lite for microcontroller
|
||
|
||
## [0.7.3] - 2022-02-23:
|
||
All changes since 0.7.2
|
||
|
||
### Changed:
|
||
- freertos: change exception handling
|
||
|
||
## [0.7.2] - 2022-02-21:
|
||
All changes since 0.7.1
|
||
|
||
### Changed:
|
||
- freertos: change freertos irq stack definition, passed in CMakeLists.txt, defined in linker
|
||
- soc: hpm6750: add DISABLE_IRQ_PREEMPTIVE to check if it needs to enable irq preemption
|
||
|
||
### Fixed:
|
||
- freertos: disable irq preemption
|
||
|
||
## [0.7.1] - 2022-02-13:
|
||
|
||
All changes since 0.7.0
|
||
|
||
### Changed:
|
||
- drivers: adc12: update adc12_prd_config_t
|
||
- samples: can: update case with interrupt and communication between two boards
|
||
|
||
### Fixed:
|
||
- drivers: can: fix blocking transcation issue
|
||
- samples: mbx: support run this example in SES
|
||
- SES: startup: add fpu enable if abi is set to enable hw fp
|
||
|
||
### Added:
|
||
- samples: multicore: add flash based multicore example
|
||
- drivers: can: add apis to recvieve message for non-blocking use
|
||
|
||
## [0.7.0] - 2022-01-30:
|
||
|
||
All changes since 0.6.2
|
||
|
||
### Changed:
|
||
- update default CPU frequency to 816MHz from 648MHz
|
||
- update the ip headers
|
||
- drivers: gpio: replace gpio_XXX_pins with gpio_XXX_port
|
||
- drivers: gpio: remove pin level enum definition
|
||
- drivers: i2s: driver update to remove mclk_div
|
||
- drivers: ptpc: update driver
|
||
- drivers: common: update get first set bit API
|
||
- drivers: uart: split one enable with parameter into enable and disable interfaces
|
||
- drivers: pwm: change name of output_channel config API
|
||
- drivers: trgm: split separate API to enable/disable io output
|
||
- soc: HPM6750: initialize noncacheable data in startup
|
||
- soc: HPM6750: l1c: update fence.i call
|
||
- samples: hello_world: add LED flashing
|
||
- samples: littlevgl: remove lvgl example
|
||
|
||
### Fixed:
|
||
- hpm6750evkmini: correct refresh cycle number of sdram
|
||
- hpm6750evkmini: Fix the SDRAM memory range issue in flash_sdram_xip linker file
|
||
- SES: remove no_relax option for linker, since segger has provide a patch to its ld for ses v6.10.
|
||
- drivers: gpio: fix read pin issue:
|
||
- drivers: usb: fix usb disconnection under linux environment
|
||
- drivers: sdxc: Fixed the compatibility issue on different SD/eMMC cards in the sdcard_fatfs demo
|
||
- drivers: gptmr: incorrect DMAEN configuration condition
|
||
- drivers: gptmr: clear CNTRST bit after set.
|
||
- SDK_DECLARE_EXT_ISR_M cannot work in the c++ file
|
||
- FreeRTOS: fix ISR_STACK setting
|
||
- components: touch: gt911: fix gpio write pin call
|
||
|
||
### Added:
|
||
- SEG: add register definition file in generated embedded studio project
|
||
- samples: drivers: gpiom: Add example to demonstrate gpiom's function
|
||
- drivers: common: add macro to put data into noncacheable sections
|
||
- middleware: integrate lwip
|
||
|