74 KiB

Raw Blame History

Change Log

[1.6.0] - 2024-06-28:

Main changes since 1.5.0 Tested Segger Embedded Studio Version: 8.10d Tested IAR Embedded Workbench for RISC-V Version: 3.30.1

Known Issue:

some IAR projects does not work properly when optimization level is increased

Changed:

soc: reorganize the directory structure
soc: hpm6750: declare get_frequency_for_source API for clock drver header file
soc: update soc cmakelists to add b ext info
soc: hpm6750: add feature for ioc pad ctrl setting issue
soc: toolchains: gcc: correct LMA for NOLOAD sections
soc: move eh_frame into separate section
boards: hpm6750xxxx apply workaround for E00029.
boards: change hpm5301evklite adc16 channel
boards: board.h: adc16: add marco BOARD_APP_ADC16_HW_TRIG_SRC_CLK_NAME
boards: adjust function position of adc pin initialization
boards: hpm6300evk and hpm6e00evk: sdram use px07 as femc dqs pin
boards: hpm6e00evk: rename init_sdram_pins to init_femc_pins
boards: hpm6e00evk: change board i2c instance to I2C0
drivers: can/mcan add parameter check for low-level bit timing.
drivers: enet: add bitfield ENET0_RMII_TXCLK_SEL for hpm6300
drivers: i2c: add DATACNT high byte process
drivers: pwm: update HRPWM process
drivers: spi: optimize reading speed for spi_read_data API
drivers: spi: add set/get data phase format APIs for spi master
drivers: spi: delete the spi startand operation APIs
drivers: adc16: remove an unused member conv_duration from adc16_config_t
drivers: enet: update for enet_interrupt_enable_t
drivers: mcan reduce unnecessary register access in mcan_read_rxfifo.
drivers: mtg: add calculate function param clock
drivers: mtg: add several calculate functions
drivers: mcan lookeup the mcan msg ram base via mcan_soc_msg_buf variable if the MSG_BUF is in AHB RAM.
drivers: adc16: disable improvement logic of adc16 for continuous sampling maximum voltage
drivers: mcan improve transmitter delay compensation setting logic.
drivers: femc: rename data_width_in_byte to cmd_data_width
drivers: femc: update ns2cycle() to align up
drivers: common: add packed attribute
drivers: femc: delete duplicate config
drivers: mtg: change the default parameters to the low order filter
drivers: adc16: add API adc16_set_seq_hw_trigger_enable()
drivers: spi : convert enumeration return in that gets parameters APIs
drivers: pwm: add fault recovery code.
driver: pwm: change pwm trig time
components: enet_phy: dp83867/rtl8211: move the macro definition RGMII to board-level CMakeLists.txt
components: eeprom_emulation: Add ATTR_RAMFUNC for all function
components: eeprom_emulation: add power-off protection mechanism.
components: dma_mgr: add burst in fixed transfer size and swap feature
components: spi: add full_duplex and half_duplex operating APIs
components: spi: support 1 to 32 bits width transfer for nonblocking APIs
components: usb: device: support iso transfer mult feature
middleware: hpm_sdmmc add emmc sleep & wakeup function.
middleware: tinyusb: ehci: support chain transfer
middleware: threadx: add low power support
middleware: cherryusb: update for advance descriptor
middleware: hpm_sdmmc: optimized to support multiple cards
middleware: cherryusb/tinyusb/usbx: enable suspend isr
middleware: FreeRTOS: update to 202210.01 lts
middleware: cherryusb: update to v1.3.0
middleware: freertos: modify missed timer count num
middleware: freertos: update IAR port file
middleware: freertos: delete fence operations
middleware: freertos: make the calculation more simple.
middleware: hpm_sdmmc add cache control macro.
middleware: hpm_sdmmc: improve the logic for detecting CMD23 support.
middleware: freertos: add tickless stop mode support
middleware: freertos: add user custom process function call
middleware: hpm_mcl_v2: add hpm smc control.
middleware: freertos: place xPortxxx to isr_vector section
middleware: hpm_math: add dsp support for zcc
middleware: microros: add zcc support
middleware: rtos: asm adjustment for zcc toolchain
middleware: hpm_mcl_v2: add pwm dead area compensation.
middleware: hpm_mcl_v2: add dq axis decoupling function
middleware: cherryusb: add macro USBH_USE_CUSTOM_ISR/USBD_USE_CUSTOM_ISR
middleware: lvgl: upgrade to v9
middleware: lvgl: rewrite the scissor.
middleware: lvgl: upgrade allocate algorithm for draw_buf.
samples: rdc: remove unused dac driver in sample
samples: lwip/netxduo/modbus: add conditional compile for reference clock setting in RMII mode
samples: audio_codec: common: change FIL_SEARCH_NUM from 10 to 20
samples: dhyrstone: surpress build warnings
samples: dhrystone Optimize performance.
samples: coremark Optimize performance.
samples: drivers: spi: interrupt: transmission optimization. The transmission will start after the configuration is completed.
samples: adapt spi components to drive and move to the samples dir for spi sdcard samples
samples: cherryusb: device: change descriptor string to HPMicro
samples: cherryusb: device: use advanced descriptor to support high/full speed
samples: rename jpeg to image
samples: drivers: sdxc: sd_fatfs: add card hotplug support
samples: cherryusb: host: usbnet: replace block to noblock for read terminal char
samples: cherryusb: host: usbnet: decrease lwip MEM_SIZE
samples: cherryusb: move host hid info print code to thread
samples: audio_codec: refactoring code
samples: spi: dma: SPI master transmission optimization
samples: mtg: make the open_loop_trajectory sample more readable
samples: drivers: adc16: add some misc optimization
samples: drivers: adc16: add pwmv2 support
samples: motor_ctrl: bldc_foc_hw: remove hardware control
samples: drivers: mcan add tips for the usage of tdc.
samples: vglite: update rtos config file to fit gptmr tickless mode
samples: lwip/modus/netxduo: add a function call to get the enet default interrupt config
samples: sdm: using pwm to provide clock for sdm sensor.
samples: spi_components: half_duplex: updated to support 1 to 32bits width transfer
samples: spi_components: full_duplex: updated to support 1 to 32bits width transfer
samples: add freertos tickless stop mode sample
samples: benchmark: update compile options for zcc
samples: drivers: adc16: optimize the process logic of sequence and preemption
samples: drivers: sei: device: tamagawa: update eeprom cmd
samples: adc12: optimization for trigger mux and trigger frequency settings
samples: sei: device: tamagawa: support EEPROM protocol
samples: mcl: add pwm dead area compensation.
samples: motor_ctrl: add dq axis decoupling function
samples: cherryusb: move dual_port samples to dual_port folder
samples: cherryusb: adapter to cherryusb v1.3.0
samples: drivers: adc12/adc16/dac: support abort feature in interactive terminal
samples: lwip: lwip_iperf: support abort feature to reselect the test mode
samples: lwip: common: multiple: add definitions of remote ip addresses for iperf
samples: motor_ctrl: bldc_lvlg_foc: add lvgl v8.3.5 for this demo
samples: tinyusb: uac2: support full speed
samples: power_mode_switch: update readme
samples: cherryusb: uac2: change default samplerate order
samples: bldc_foc: update bldc_foc_angle_align() for hardware loop
cmake: toolchain: add ar option to remove timestamp
cmake: toolchain: suppress output while querying spec
cmake: lld: update link option for zcc
cmake/scripts/soc: support b ext convertion to tools
cmake: sdk_app_src_glob: modify to recursive

Fixed:

soc: update USE_NONVECTOR_MODE defined used
soc: initialize .fast_ram.* section
soc: iar linker: fix safe stack init
soc: add missing ptmr clock
soc: hpm6880: fix get_frequency_for_i2s error
soc: hpm6880: Modify the value of SPI_SOC_FIFO_DEPTH from 4 to 8. for hpm_soc_feature.h
soc: toolchain: iar fix iar ram_stress issue in ram_debug build.
boards: hpm5301evklite: fixed can't output work for gptmr samples such as pwm_generate
drivers: enet: fix the clearing of DMA PBL setting
drivers: dma: fix dma_clear_transfer_status() API
drivers: sdxc Fix timeout calculation issue and DMA enabling logic.
drivers: adc16: fix the logic of adc16_set_pmt_queue_enable() when the parameter enable is false
drivers: mbox: fix error that BEIE can't be operated by interface
drivers: spi: fixed assignment value error for spi_set_clock_phase and spi_set_clock_polarity APIs
drivers: lcdc: fix ST and DMA_ST clear api.
drivers: mipi_dsi: fix MIPI_DSI_FMT_RGB565 config.
drivers: spi: fixed assignment error issue for enable/disable address phase APIs
drivers: i2c: fix return value type of i2c_get_data_count()
components: usb device/enet_phy: fix unwanted files in localize folder
components: panle: fix panel timing.
components: eeprom_emulation: demo flash crashed.
middleware: cherryusb: ehci: delete timeout clear before give sem
middleware: uC/OS-III: modify fpu context save&restore
middleware: cherryusb: fix freertos enter/exit critical
middleware: audio_codec: fix hpm_wav_decode() single channel pbuf data
middleware: mclv2: fix andes toolchain compiler error.
middleware: cherryusb: fix ehci_qh_pool init miss busid for v1.3.0
middleware: lwip: apps: lwiperf: fix the bug of failing to restart iperf in TCP/UDP server mode
middleware: tinyusb: fix _usbd_dev.speed error to support full speed
middleware: hpm_mcl_v2: fix uncontrolled after large changes in motor speed.
samples: dhyrstone: fix build issue for release type using nds toolchain
samples: lwip: lwip_tcpclient: fix TCP commnuication error after DHCP enabled
samples: lwip: lwip_tcpclient_freertos_socket: fix connection error before IP assigned from DHCP
samples: correct cmsis_os2/mem_pool project name
samples: multicore: common Fix SDP memcpy blocking issue in ram_build.
samples: lwip: lwip_tcpecho_xxx_rtthread_nano: fix failing to get IP by DHCP serivice
samples: spi_sdcard: fixed the place section name error issue
samples: cherryusb: audio: fix wm8960 codec volume max value
samples: img: jpeg_decode: fix decode when only one qtab exist.
samples: tflm: mlperf: remove unnecessary codes.
samples: fix cherryusb mic no sound error
samples: spi_components: polling: fixed doesn't work for polling samples
samples: tamagawa: fix delay times is zero.
samples: bldc_foc: fix hardware_foc position loop error
cmake: link ndsgcc itf for application
cmake: localize_sdk: use utf-8 as default encoding
cmake: ide: keep preprocessing definition

Added:

soc: add zcc toolchain support
soc: clock_driver Add clock_set_wdg_source API.
soc: gcc linker: add fast_ram.init section size overflow check
soc: add FreeRTOS vector mode support
soc/board: add HPM6E80 support
drivers: common: add macros for .fast_ram.*
drivers: enet: add an API enet_get_default_interrupt_config
drivers: enet: add MII mode support
drivers: common add api for converting tick to us or ms.
drivers: pllctlv2 add new API to configure PLL.
drivers: uart: add uart_modem_write_rts_pin API
drivers: uart: add get/clear addr match flags APIs such as addr_match, addr_match_idle, data_lost
drivers: add lobs drivers
drivers: usb: add some APIs for low power future usage drivers: spi: add spi_slave_set_user_status API
drivers: usb: add suspend/resume APIs
drivers: usb: add enter/exit lower power suspend APIs
drivers: spi: add read SPI RX/TX FIFO size APIs
drivers: usb: add usb_set_port_test_mode() API
drivers: sdp add new apis.
drivers: mcan add new api for canceling pending transmission.
drivers: mtg: add get&clear event irq interface
drivers: qeiv2: add oneshot mode
drivers: add clc driver
drivers: add vsc driver
drivers: spi: add get/set shift direction APIs
drivers: uart: add an new API uart_try_receive_byte()
drivers: pixelmux: add api that set mipi dsi date type.
drivers: gptmr: add monitor function APIs
drivers: gptmr: add opmode APIs
drivers: gptmr: add qeimode APIs
components: add i2s_over_spi
components: codec: add wm8978
components: enet_phy: add jl1111 driver
components: add ppi components
components: touch: add gt9271 driver.
components: debug_console: add a new API console_try_receive_byte()
middleware: add lodepng
middleware: add minimp3
samples: cherryusb: device: add WinUSB 1.0 and WinUSB 2.0 samples
samples: lwip: add LPI interrupt mask setting
samples: add i2s_emulation sample
samples: lvgl_audio_player: support mp3 decoder
samples: uart: add uart_rx_line_status sample
samples: add half_duplex samples for spi_components
samples: add full_duplex samples for spi_components
samples: drivers: sdxc: emmc add new sameple for eMMC sleep & awake.
samples: drivers: add lobs sample
samples: drivers: spi: sd/sd_fatfs: support DMA transfer
samples: threadx: add low power mode sample
samples: image: add png encoder sample
samples: image: add png decoder sample
samples: audio_codec: add decoder_mp3 sample
samples: ppi: add parallel adc sample
samples: ppi: add async_sram sample
samples: qeov2: add wave_out sample
samples: qeov2: add abz_out sample
samples: pwm: add async fault demo
samples: motor_ctrl: add hardware foc
samples: drivers: pwmv2: add pwmv2 pair waveform
samples: dmav2: add dmav2_fixed_burst_swap sample
samples: qeiv2: add oneshot mode sample
samples: add smix_dao sample.
samples: add ecat_io sample.
samples: cherryusb: add one host and one device dual port sample
samples: add pwm/hrpwm fault mode
samples: lwip: add lwip_iperf_multi_ports
samples: drivers: tsw: add a tsn_switch sample
cmake: add symbol HPM_BUILD_TYPE to specify build type
docs: add generated cmake_intro.rst
docs: getting started: add zcc support related information

[1.5.0] - 2024-03-29:

Main changes since 1.4.0

Tested Segger Embedded Studio Version: 7.32a Tested IAR Embedded Workbench for RISC-V Version: 3.20.1

Known Issue:

some IAR projects does not work properly when optimization level is increased

Changed:

soc: iomux: update macro prefix in pmic_iomux and batt_iomux.
soc: feature: change usb endpoint max number from 8 to 16
soc: correct svd files and add subpart module list
drivers: usb: change usb_phy_get_line_state() to external function
drivers: qeiv2: update filter length setting
drivers: adc12/adc16: add sanity check for sample cycle
drivers: femc: add delay_cell_disable config option
drivers: i2s: change fifo threshold parameter.
drivers: i2c: replace and use the macro definition of hpm_soc_ip_feature.
drivers: uart: supplementary description of uart_check_status API.
components: enet_phy: lan8720/rtl8201/rtl8211: unify the default config with type bool
components: enet_phy: remove unused included header file
components: enet_phy: rtl8201/rtl8211: update register description
components: dma_mgr: change isr handler from static to public
middleware: tinyusb: host: use echi drivers
middleware: tinyusb: rename CFG_TUSB_HOST_DEVICE_MAX to CFG_TUH_DEVICE_MAX
middleware: tinyusb: update to v0.16
middleware: rtthread-nano: use soc reset_handler and define MAIN_ENTRY as entry
middleware: fatfs: tinyusb: adapter to tinyusb update
middleware: threadx: use TX_TIMER_TICKS_PER_SECOND to config work ticks
middleware: threadx: use samples tx_user.h
middleware: uC/OS-III: enable sw interrupt in OSCtxSw/OSIntCtxSw
middleware: ucos: ports: Added IAR portable layer for ucos.
middleware: cherryusb/azure_rtos: add defined ICCRISCV for iar
middleware: hpm_math: simplify libdsp path.
middleware: cherryusb: update to v1.1.0
middleware: rtthread-nano:halt cpu when exception occur.
middleware: hpm_math: simplify libnn path.
middleware: threadx: move frequently called function to ram.
middleware: tinyusb: change endpoint number from 8 to 16
middleware: usbx: change endpoint number from 8 to 16
middleware: cherryusb: msc device: update to support multi lun and deinit
middleware: eclipse_threadx: update license
middleware: fatfs: tinyusb: add osal_task_delay() when use rtos wait
middleware: tinyusb: update CMakeLists.txt and delete custom osal_task_delay()
middleware: tinyusb: add debounce in port change isr
samples: erpc: add middleware src use middleware CMakeLists.txt
samples: multicore: core1: use board_init_core1() API
samples: multicore: coremark: delete custom reset_handler and use app_main as MAIN_ENTRY
samples: tinyusb: update samples to adapter tinyusb v0.16
samples: usbx: host: delete unused hpm_usb_host.h
samples: usb: delete CONFIG_USB_HOST set
samples: lvgl_coremark: disable freqswitch_btn when coremark running
samples: mono: move to driver directory.
samples: freertos: change configMAX_PRIORITIES from 7 to 32
samples: rtthread: delete unused macro RT_THREAD_PRIORITY_32
samples: cherryusb: usbnet: decrease rtos stack config size
samples: lwip: all: unify logs about IP information
samples: lwip: lwip_https_server: remove an unused file
samples: lwip: all: update DHCP progress logic
samples: lwip: common: remove s_pxNetIf
samples: lwip: adjust the directories of netconf.c/netcof.h
samples: lwip: common: optimize speed for getting IP from DHCP server
samples: lwip: rename common_lwip.c to common.c
samples: lwip: common: adjust the call logic of netif_set_up/netif_set_down
samples: lwip: common: change the time of invoking netif_user_notification
samples: lwip: common: rename user_notification to netif_user_notification
samples: lwip: adjust directory structures to be compatible with single and multiple network ports
samples: use generate_ide_projects for new samples
samples: cherryusb: device: cdc acm: reorganize directory structure
samplse: gptmr: t_shape_accel_decel: modify the source address mode of DMA.
samples: cherryusb: device: change readbuf size from 2048 to CDC_MAX_MPS
samples: drivers: femc: update sdram dqs config
samples: update app.yaml to use ip_feature
samples: drivers: uart: change to app uart
samples: audio_codec: update wm8960 I2S protocol.
samples: drivers: cam: change cam sample to cam_dvp sample.
samples: usbx: device: msc: decrease ram disk size to 16KB
samples: cherryusb: msc device: update to support multi lun
samples: driver: uart_lin: support LIN transceiver on board.
samples: adc: temp: rename temp to adc16_temperature
samples: bldc block: Compatible with both hall and qeiv2 peripherals.
samples: motor_ctrl: Modify the value of pwm reload.
samples: lwip: common: single/multiple: update the size passed into sys_mbox_new()
samples: lwip: common: single/multiple: replace enet_get_link_status with netif_is_link_up
samples: lwip: lwip_https_server: remove unused header file
samples: lwip: rename macro TCP_XXX_PORT
samples: lwip: add cmake flag for netconn/socket api
samples: decode_wav: sd_fafts: update sd_choose_music.
samples: power_mode_switch: maintain xpi0 clock on switching preset
samples: dhrystone Change the optmization level to O3.
samples: tinyusb: hid_generic_inout: delete redundant image
samples: power_mode_switch: hpm67/hpm63: preserve femc clock at wait/stop mode
samples: erpc: core1: use optimization -os
samples: update uart_tamagawa to use software trig if TRGM not exist.
samples: eeprom_emulation: reduce management area
samples: sdxc: use block_size instead of 512
samples: erpc: add -fno-exceptions compile option
samples: tinyusb: disable debug log print
boards: hpm5300evk and hpm6800evk: add delay after USB_PWR Pin init for power stable
boards: hpm6750evkmini: modify gptmr pins.
boards: hpm6200evk: modify gptmr pins.
boards: hpm6200evk: modify the i2c pins.
boards: hpm6750xxx: update sdram dqs config
boards: hpm6800evk:pinmux Increase drive strength for sdxc pins
boards: iomux: update macro prefix for pmic_iomux and batt_iomux.
boards: rename board feature
boards: update BOARD_APP_UART definition
boards: rename console definitions
boards: hpm5301evklite: update uart clock in board.c.
boards: hpm6750evkmini: change BOARD_GPTMR_PWM_DMA_SRC definition.
docs: samples: use glob in high level readme.
docs: update top level readme.
docs: netxduo: update sntp readme.
docs: threadx: update threadx hello readme.
docs: lwip: align pictures to the left
docs: pip: add cmake doc dependency
docs: add changelog to sphnix-doc.
scripts: ses: generate asm after build by default.
scripts: update linked project path logic.
scripts: check_board_cap.py: check ip feature's availability
cmake: remove CMP0116 setting.
cmake&scripts: clarify the error caused by core1 compiling failure.
scripts: ses/iar: use relpath in project file

Added:

soc: hpm6360/hpm6750/hpm6800: add MAC-related definitions in OTP section
soc: reset: add MAIN_ENTRY macro to custom define main entry
soc: add hpm6850 and hpm6830 part.
soc: soc_modules.list: add tamper drivers
soc: Add IAR toolchain support.
soc: add ip feature to soc_modules.list
soc: add hpm_soc_ip_feature.h
soc: driver: ppor: add reset hold operation APIs
soc: clock_driver add the clock_get_divider API.
soc: sysctl: add apis to control clock preservation
soc: toolchains: gcc: ram linker: add ILM last address overflow check
drivers: mcan Add timeout counter support.
drivers: tamper: add tamper driver
drivers: cam: add cam_update_buffer2 API
drivers: opamp: Add user configuration code.
drivers: lcdc: add stride for layer config.
drivers: pdma: add pdma_blit_ex.
drivers:pllctl add out-of-bound check in pllctl driver.
components:uart_lin: add hpm_uart_lin_send_wakeup() API
components: enet_phy: add LAN8720 driver
components: enet_phy: add definition of enet_phy_link_status_t
middleware: cherryusb: host: add dual port support
middleware: cmsis_os2: adapter to rtthread wrapper
middleware: cmsis_os2: update freertos files
middleware: cmsis_os2: adapter to threadx wrapper
middleware: cmsis_os2: adapter to ucOS-III wrapper
middleware: hpm_sdmmc Add eMMC config partition API.
middleware: cherryusb Add IAR toolchain support
middleware: erpc Fix IAR RISC-V support issue
middleware: tflm: add IAR riscv support in flatbuffer
middleware: FreeRTOS: portable:Added IAR portable layer.
middleware: segger_rtt Added EWRISCV support
middleware: hpm_math Add nds_dsp library for IAR.
middleware: lwip: cc: add PACK_STRUCT_XXX definitions for IAR platform
middleware: uC/OS-III: enable plicsw in IAR asm code
middleware: add tinyengine
middleware: threadx: add support for gptmr.
middleware: threadx: add profile support.
middleware: add agile_modbus.
middleware: add cherryrb.
middleware: cherryusb Add missing swap32/swap16 implementation.
middleware: hpm_mclv2: add block type drive motors
middleware: cherryusb: fix usbh_core ep0 buffer index
boards: hpm6200xxx and hpm6750xxx: add board_init_core1() API
boards: add tamper feature and pins init
boards: hpm5300evk: add board_init_console() declaration in board.h
boards: hpm6750evk/hpm6750evk2: add board_dual_usb feature
boards: openocd: add windows guide to *_all_in_one.cfg
boards: openocd: soc: add reset_soc proc
board:add pgpio configuration on hpm5301evklite
samples: drivers: add mono sample.
samples: drivers:mcan Add timeout counter sample.
samples: drivers: tamper: add tamper sample
samples: cmsis_os2: blinky: add rtthread samples
samples: cmsis_os2: add msg_queue sample
samples: cmsis_os2: add mem_pool samples
samples: cmsis_os2: msg_queue: add ucOS-III support
samples: cmsis_os2: blinky: add ucOS-III support
samples: lwip: common: add a task netif_update_link_status
samples: lwip: add MAC address load from OPT MAC area
samples: cherryusb: device: cdc acm: add cdc_acm_uart_com sample
samples: cherryusb: device: add msc sdcard sample
samples: tinyengine: add person detection.
samples: rtos: add threadx gptmr sample.
samples: modbus: tcp: add tcp samples.
samples: modbus: rtu: add rtu sample.
samples: add cherryrb sample.
samples: cherryusb: host: add dual port sample
samples: cherryusb: device: add dual port sample
samples: cherryusb: device: add dual lun msc sample
samples: lwip: ports: rtthread-nano: multiple: add arch-related files
samples: lwip: ports: freertos: multiple: add arch-related files
samples: lwip: common: multiple: osal: add osTaskFunction definition
samples: lwip: add a lwip_tcpecho_multi_ports_rtthread-nano sample
samples: lwip: add a lwip_tcpecho_multi_ports_freertos
samples: lwip: lwip_tcpecho_xxx: add definitions for task priorities
samples: lwip: lwip_tcpecho_freertos_socket: newly add
samples: lwip: lwip_tcpclient: newly add
samples: lwip: add lwip_tcpclient_freertos_socket
samples: vglite: add sample of rotate tiger.
samples: lwip: lwip_tcpclient_freertos_socket: fix failure to run
samples: lwip: lwip_tcpclient: fix failure to run with some release-related type
samples: jpeg: jpeg_encode: add debounce for button.
docs: add cmake doc
docs: hpm5300evk: add qeiv2 sin/cos pins
scripts: support sdk project localization.
cmake: add nds-gcc options to sdk_lib for nds-gcc.
cmake/scripts: add IAR project generation support
cmake: add symbols to specify linker for tools.
cmake: add sdk_*_src_glob.
cmake: add custom targets for localization.

Fixed:

soc: hpm6750: fix segger linker vectors order
soc: hpm_interrupt.h Fix compiling warning for DSP related macros
soc: hpm6750: otp Fix OTP program and read logic
soc: hpm6880: clock Fix wrong enum value for TSNS clock.
soc: clock driver: correct the clock name value for pll clocks.
soc: HPM6280: fix adc/dac clock setting
soc: ppor: fix ppor clear reset flag and set reset type API error
soc: HPM6880: fix i2s clock config driver
drivers: adc12: fix calibration setting error
drivers: cam: DMASA_FB2 need to be assigned whether FB2 buffer is enable or not.
drivers:can correct the logic of disabling re-transmission for ptb & stb.
drivers: qeo: fix driver error
drivers: i2s: ensure valid BCLK before call software reset.
drivers: pdma: fixed OUT_PS[] config.
components: wm8960: invert LRCLK to align with soc I2S.
middleware: uC/OS-III: fix register t0 unsafe.
middleware: ptpd: fix netShutdown error in ptpd initialization
middleware: cmsis_os2: task should call exit interface before exit
middleware: threadx: fix threadx profile RA register save and restore bug.
middleware: hpm_mcl: fix divide-by-zero error. refs: hpm_sdk-#1091
middleware: cherryusb/tinyusb/usbx: device: fix transfer_len not reset
middleware: cherryusb/usbx: fix dtd return problem
middleware: cherryusb/tinyusb/usbx: fix usb device interrupt should be check active status
middleware: tinyusb: fix ehci cap_reg address error
middleware: tinyusb: fix hid report id
middleware: cherryusb: fix usbd_ep_close not reset ep_enable flag
middleware: cherryusb: fix rndis message length check
middleware: freertos: fix implementation error in xPortIsInsideInterrupt.
boards: hpm6200evk: fix tamper pin config
board: openocd: all_in_one: hpm6800 config file is missed.
boards: openocd: all_in_one: hpm5300: correct soc config name.
samples: threadx hello: fix printing errors.
samples: drivers: ad12/adc16: fix initialization sequence for trigger source, trigger mux and trigger target config
samples: lwip: lwip_ptp: fix netSend error before link-up
samples: dma: fix dma uart init position
samples: drivers:spi:master_trans_large_amound_of_data Fix logic error if SPI support 4GB transfer size
samples: sdxc: add boundary protection for last 1024 blocks test
samples: lwip: common: multiple: fix typo of enet_update_dhcp_state()
samples: lwip: common: single/multiple: fix timeout passed into sys_arch_mbox_fetch()
samples: e2prom: bugfix: base read fail if run perf firstly .refs:hpm_sdk-#1499
samples: modbus: tcp: use volatile to prevent the compiler from optimizing out key variables
samples: modbus: rtu: fixed failed to run after turning on optimization issue.
samples: power_mode_switch: hpm68xx: fix ddr access issue for wait/stop mode
samples: cherryrb: fixed stack overflow issue
samples: lwip: lwip_tcpecho_multi_ports_ports_rtthread-nano: fix failure to run
sample: jpeg: jpeg_encode: fix that udisk can't be mounted when first capture.
cmake: correct board search path symbol for core1.
cmake: gcc: fix system include path.
cmake: fix sdk_link_libraries failed to link std lib.
cmake: EXTAR_LD_FLAGS to be added as ld options.
docs: lwip_ptp: v1: salve: fix format error
docs: samples: ppor: change title from sysctl to ppor
docs: hpm6750evk2: fix table display error

[1.4.0] - 2023-12-29:

Main changes since 1.3.0

Tested Segger Embedded Studio Version: 7.32

Changed:

soc: hpm5301: add hpm5301
soc: hpm6880: add hpm6880
soc: HPM6750: pcfg: update dcdc dcm mode config
soc: clock driver: update clock_set_source_divider() and clock_get_source()
boards: add hpm5301evklite
boards: add hpm6800evk
boards: update clock_set_source_divider() to use clk_src_t type param
boards: hpm6750evkmini: use the same uart port as core1 for some samples.
drivers: dao: update driver support new feature on hpm6800
drivers: adc16: update comment about cal_avg_cfg in calibration
drivers: qeiv2: change adc trigmux name x to 0 and y to 1
drivers: femc: add overflow protect to time config
drivers: mcan Enlarge the range of CAN_EVENT_ERROR.
components: serial_nor: add subdirectory in cmakelists
middleware: cherryusb: update to v0.10.2
middleware: cherryusb: rename host and device isr
middleware: FreeRTOS: xPortIsInsideInterrupt() using CSR_MSCRATCH
middleware:hpm_sdmmc Enhanced all speed modes support for SD and eMMC.
middleware: usbx: device: support chain transfer
samples: cherryusb: host: rndis: integrate dhcp thread into ping thread for host rndis ping and iperf sample
samples: adc: temp: add isr for temp out of thresholds
samples: drivers: acmp: optimization for comparing input voltage
samples: lwip: add DHCP macro definition in CMakeLists.txt
samples: lwip_ptp: enable DHCP feature in PTP samples
samples: drivers: qeiv2: update API for adc-qeiv2 pin initialization
samples: bldc_foc: change adc buffer size from 40 words to 48 words
samples: remove explicitly c++ standard setting.
samples: driver: cam: set default cmake build type
samples: lwip: update to Class C static IP adress
samples: tinyuf2: remove unnecessary cache ops.
samples: lwip: lwip_tcpecho_freertos: optimization for API call in a thread-safe way
samples: lwip: lwip_ptp: v1: slave: update static ip
samples: lwip: optimize DHCP enable logic
samples: lwip: opts: adjust the allocation strategy of memory pool
samples: lwip: lwip_iperf: adjust MEM_SIZE for saving memory consumption
samples: lwip: lwip_tcpecho_multi_ports: update the second IP with C class
samples: enet: optimization for PHY selections
samples: dma: update uart rx circle transfer buffer size
samples: drivers: sdxc/emmc Correct doc for emmc sample.
cmake: sdk_link_libraries link libraries for supported tools.
cmake: add project name for hpm_sdk sub directory.
cmake: decouple CMAKE_BUILD_TYPE and linker script.
cmake: ses: remove -Ox from gcc option list.
cmake: set default c++ standard to c++11.
Update CONFIG_HAS_xxx to HPMSOC_HAS_xxx.
segger: enable all warnings.
segger: release: release optimization level use cmakelist config
scripts: ses: set intermediate dir in project file.
docs: remove quick start guide from top level readme
docs: change doc structure.

Added:

soc: HPM5361: add trgm filter shift length feature
soc & drivers: hpm5300: add DMAMUX_SOC_WRITEONLY and TRGM_SOC_HAS_DMAMUX_EN features
drivers: lcb: add lcb driver.
drivers: sdxc add more APIs for timing and power control.
drivers: mipi_csi: add mipi csi.
drivers: cam: add cam_stop_safely API
components: usb: device: add dtd chain transfer
components: panel: enable panel component.
components: camera: ov5640: add mipi interface.
middleware: rtthread-nano: add v3.1.5
middleware: rtthread-nano: add FPU support.
middleware: tinyusb: device: update to support chain transfer
middleware: cherryusb: device: update to support chain transfer
middleware: vglite: add 4.0.49.
middleware: cherryusb: add USB_OSAL_WAITING_FOREVER for sem and mq use
middleware: add hpm_mcl_v2
middleware: lwip: add ptpd v1 & v2
middleware: cmsis_os2: add source files.
samples: mcl: add step motor.
samples: lwip: lwip_ptp: v2: support IEEE1588 V2
samples: cherryusb: add audio_v2_mic_speaker_rtthread sample
samples: cherryusb: host: add hid and msc rtthread samples
samples: cherryusb: host: usbnet: add support ec20 module sample.
samples: cmsis_os2: add blinky sample.
samples: driver: mipi_csi: add mipi_csi.
samples: mcan Support MCAN4-7 loopback testing.
cmake: support custom output file name.

Fixed:

soc: fix cache maintenance at startup
soc: hpm53xx Correct exip API tree offset.
soc: toolchain: missing .fast.* in gnu ld linker script.
soc: fix tbss and tdata section not initialized.
soc: sysctl: sysctl_enable_group_resource() should be check LOC_BUSY
soc: hpm5300 Correct Cache size and Cacheline size.
boards: hpm6750evkmini Fix the issue that eMMC is still 3.3V even 1.8V is selected.
boards: hpm5301evklite correct jlink script device number.
components: camera: power_up is enable by default for ov5640/ov7725.
docs: samples: drivers: add numberic index.
drivers/soc: fix build warning
drivers: i2c: add slave device response judgment for master read/write APIs
drivers: opamp: fix opamp vssa connect error.
drivers: pllv2: fix pllctlv2_pll_is_stable() API
drivers: qeiv2: fix invalid argument check
drivers: dac: fix the upper limit value setting for DAC_OUTPUT
drivers: jpeg: fix pixel format index for out buffer.
drivers: uart: fix not support oversample 32 for rx idle detection on hpm5300
middleware:ftafs Fix SD card init crash.
middleware: mcl: fix path plan error.
middleware: hpm_sdmmc Fix the issue that IO initialization work unstable on HPM6300.
middleware: hpm_sdmmc Fix voltage switch setting issue for SD and eMMC.
middleware: hpm_sdmmc Fix the PWR and VSEL IO initiaization issue. refs:hpm-sdk-#863
samples: sei: fix nikon sample crc calc error.
samples: cherryusb: msc device: add pre-format fat12 file system in u disk
samples: adcx: replace const with a macro for ADC sample cycle
samples: tinyusb:fix the usb host pin init.
samples: motor_ctrl: bldc_littlevgl_foc: program crash.
samples: qeiv2: uvw: fix uninitialized pointer usage
samples: cherryusb: fix semaphore give in isr
samples: drivers: Fix the issue that can error example may block.
samples: uart_irq: fix unable to limit receive large than buffer size.
samples: drivers:sdxc:emmc remove infinite loop for emmc initialization.
samples: drivers: i2s: fix tx underflow during tx start
samples: lwip: lwip_tcpecho_multiple_ports: fix no echo data when receiving large amounts of data
samples: mcl: pwm duty set error.
samples: cherryusb: host: usbnet: fixed when performing a stress test with a large amount of iperf data, will send fai.
samples: cherryusb: audio_v2_mic_speaker_rtthread: fix mic no voice problem
samples: jpeg_decode: add delay after usb pins init for waiting power stable
samples: hfi: hpm6750evk2: fix the motor shake.
cmake: segger: remove workstation specific path info.
cmake/soc: fix heap/stack size setting for andes toolchain.
cmake: ses: correct device name for core1.

[1.3.0] - 2023-09-28:

Main changes since 1.2.0

Tested Segger Embedded Studio Version: 7.32

Changed:

boards: hpm6200evk/hpm6300evk: delete unwanted clock_ahb div set
boards: hpm6750xxx: switch dcdc work mode to dcm mode
docs: sdk: boards: hpm6750evk2: add pps pin information
component: wm8960: support sysclk pre-divider
components: serial_nor: add serial nor flash.
openocd: probes: ft2232: remove trst and srst config.
ip: cam：remove 0x5c MAX_WN_CYCLE register in regs.h
driver: cam: remove invalid register
drivers: i2s: update API
drivers: adc: adc12/adc16: rename adc16_get_busywait to adc16_is_nonblocking_mode
drivers: adc: adc12/adc16: update adcx_init API
drivers: pllctrl: update pllctrl drivers
drivers: spi : add spi enable and disable datamerge
drivers: spi : add spi_set_address_len API
drivers: pdgo Add missing APIs
drivers: uart: update uart rx idle flag process and fifo control
soc: delete_unnecessary_ppor_reset_bit_field
soc: hpm_gpiom_soc_drv.h: delete gpiom_gpio_t soc name
soc: delete DMA_SOC_BUS_NUM Macro
soc: pcfg: update pcfg SCG_CTRL related drivers
soc: hpm6750:startup Enable LMM1 clock before access to LMM1
soc: gcc ld: add memory used size check
middleware: cherryusb: update to v0.10.1
middleware: guix: demo adapts to 800 * 480 resolution
middleware: guix: improve demo display performance
middleware: cherryusb: update for midi descriptor define
middleware: cherryusb: update for midi
samples: drivers: adc: adc12/adc16: speed optimization for oneshot reading
samples: drivers: adc: adc12/adc16： update API call used for nonblocking judgement
samples: drivers: adc: adc12/adc16: update API call related to blocking setting in oneshot mode
samples: drivers: adc: adc12/adc16: reduce the input parameters of init_trigger_target function
samples: drivers: adc: adc12/adc16: update init_oneshot_config
samples: drivers: adc: adc12/adc16: optimization for clearing interrupt status
samples: drivers: pwm: Add pwm clock jitter demo
samples: cherryusb: hid host: separate mouse and keyboard urb
samples: hrpwm: Add demo for updating hrpwm frequency
samples: drivers:mcan Add CAN error handling and refined logic.
samples: mbx: move dualcore mbx sample to multicore folder
samples: cherryusb: update for v0.10.1
samples: motor_ctrl: bldc smc: gcc toolcahin enable fpu.
samples: lwip: lwip_tcpecho_freertos: optimization in a thread-safety way
samples: qeo: update qeo abz frequency configuration
samples: gptmr: add sent_signal sample.
samples: lwip: lwip_ptp: remove the dependency on pps0 pinout
samples: dma_manager: update for use dma_mgr_setup_channel()
samples: drivers: gptmr: pwm_measure: support use dma
samples: lwip: lwip_httpsrv/lwip_https_server: rename project names for uniform naming
samples: multicore: lvgl_coremark: delete custom linker files and using andes toolchain
samples: flash_algo: update device size.
samples: cherryusb: host: hid: use ep_mps to fill urb

Added:

cmake: ses: support specify custom openocd board cfg file.
cmake: support specifying minimum sdk version in app.yaml.
boards: add hpm5300evk
components: eeprom_emulation: add hpm nor-flash support
components: eeprom_emulation: add eeprom emulation component
soc: add APIs for get or set sysctl resource status
drivers: common: add HPM_ALIGN_DOWN and HPM_ALIGN_UP define
drivers: adc: ad12/adc16: add adcx_set_blocking_read/adcx_set_nonblocking_read
drivers: add encoder position driver
drivers: lcdc: add enable/disable background in alpha blender.
drivers: usb: add api to set dp/dm pin pulldown resistance
drivers: spi: add spi_get_rx_fifo_valid_data_size and spi_get_tx_fifo_valid_data_size APIs
drivers: spi: add directIO function APIs
drivers: enet: add rx resume API
drivers: adc16: add resolution setting in adc16_get_default_config API
drivers:rtc Add rtc_get_timeval API.
drivers:mcan Add mcan_transmit_via_txfifo_nonblocking API.
drivers: usb: add usb_hcd_set_power_ctrl_polarity() API
drivers: plb: add plb drivers
drivers: linv2: add linv2 driver
drivers: sei: add sei driver
drivers: dmav2: add dmav2 driver
drivers: qeo: add qeo driver
drivers: qeiv2: add qeiv2 driver
drivers: mmc: add mmc driver
drivers: rdc: add rdc driver
drivers: add opamp driver
drivers: bgpr: add related APIs for bgpr
middleware: FreeRTOS: add xPortIsInsideInterrupt() API
middleware: threadx: add definition automatically when enable traceX
middleware: freeRTOS: add use gptmr to generate interrupt
middleware: hpm_mcl: add hfi
samples: drivers: adc: adc12/adc16: add wdog feature
samples: add opamp demo
samples: cherryusb: rndis: host: add iperf sample.
samples: cherryusb: rndis: host: add ping sample.
samples: drivers: adc: adc12/adc16: add hw trigger configuration in sequence mode
samples: eeprom_emulation: add eeprom emulation perf test sample
samples: eeprom_emulation: add base api demo
samples: tracex: add demo for traceX usage
samples: cherryusb: add audio_v1_mic_speaker_midi sample
samples: cherryusb: add midi device sample
samples: drivers: sei: add sei samples
samples: drivers: plb: add plb demo
samples: drivers: mmc: add mmc demo
samples: drivers: qeiv2: add qeiv2 demo
samples: drivers: qeo: add qeo demo
samples: drivers: dmav2: add dmav2 demo
samples: drivers: linv2: add linv2 demo
samples: drivers: rdc: add rdc demo
samples: drivers: pdgo Add PDGO samples
samples: drivers: ewdg Add EWDG sample
samples: lwip: add a lwip_tcpecho_multi_ports sample
samples: motor_ctrl: add hfi

Fixed:

cmake: fix segger default heap and stack size config
cmake: fix add_subdirectory_ifdef arg processing.
doc: boards: hpm6300evk: fix acmp pin info.
boards: hpm6750evkmini: fix board_init_rgb_pwm_pins() problem
boards: hpm6200evk: fix BOARD_G_GPIO_CTRL defined in wrong position
openocd: hpm6750-dual-core: fix expression warning.
component: wm8960: fix clock tolerance process
soc: toolchains: segger: block tls add with fixed order
soc: toolchain: gcc: fix Thread-Local Storage problem
soc: segger linker files: fix heap and ctors initialize
soc: fix interrupt complete operation
soc: pcfg: fix DCDC_PROT[OVERLOAD_LP] bit access
soc: ip: adc12: fix ADC12 threshold setting
soc: HPM6750: fix clock setting and frequency obatining error
soc: HPM6360: fix clock source definitions for ADC16
soc: HPM6280: fix clock source definitions for ADC16
soc: HPM6360: fix obtaining clock source error for DAC
soc: HPM6280: fix obtaining clock source for DAC
drivers: adc16: add bus mode enable control APIs
drivers: adc16: fix ahb setting
drivers: cam: clear the status of CAM should not affect other bits
drivers: trgmux: filter function can't work.
drivers: src: adc16: fix end count setting
drivers: adc/dac: fix interrupt status clearing
drivers: adc16: fix DMA access format
drivers: sdm: fix over sample rate and signal sync problem
drivers: pwm: fix pwm xcmp enable setting
drivers: pwm: correct external fault polarity setting.
drivers: pwm: add update hrpwm reload shadow api
drivers: spi: fix can't set change data_bits use spi_set_data_bits API
drivers: ptpc: fix ptpc_clear_irq_status API issue.
drivers: i2c: fix i2c_clear_status API issue.
drivers: gptmr: fix gptmr_clear_status API issue.
middleware: erpc: rpmsg_lite: fix platform_in_isr() error
middleware:hpm_sdmmc Fix the issue sdsc cards are not supported.
middleware: threadx: fix D extend asm code error
samples: usbx: add multi devices and hot plug support
samples: motor_ctrl: fix adc trig invalidate.
samples: lwip: fix TCP reception error when size over 2KB
samples: lwip: DHCP failure in lwip_tcpecho_freertos
samples: drivers: adc: adc12: fix the status flag judgement in isr process
samples: rgb_led: fix cmp shadow error
samples: gptmr: pwm_generate: fix inaccurate duty in high frequency
samples: lwip: low_level_input: fix the network storm issue
samples: timer_basic: fix inconsistent use of defines
samples: drivers: adc: adc16: fix the bit of interrupt status clearing in sequence mode
samples: power_mode_switch: trigger system lowpower for standby mode
samples: touch_panel: fix error data when 5 fingers touch screen at same time.
samples: jpeg: jpeg_decode: fixed lcd display is tore when decoder is running
samples: jpeg: jpeg_decode: malloc out of memory on gcc
samples: drivers:can Fix abnormal behavior on can error sample.
samples: segger_rtt: call board_init_clock.
samples: drivers: acmp: fix one toggle value but multi toggle pulses
samples: lwip_tcpecho_freerstos: fix code stuck with gcc toolchain
samples: jpeg: fix JPEG_USE_UDISK compile error
samples: bldc_foc: fix input value range.
samples: cherryusb: rndis: udp_echo: fix echo extra char
samples: usbx: fix global var placement
samples: power_mode_switch: set to preset_1 after exiting wait mode.
samples: pla: fix pla first pulse abnormal.
samples: plb: fix the first pulse is abnormal.

[1.2.0] - 2023-06-30:

Main changes since 1.1.0

Tested Segger Embedded Studio Version: 7.22

Changed:

boards: hpm6750evk*: decrease core frequency from 816MHz to 648MHz
openocd: soc: hpm6280: simplify dual core release core1 approach.
cmake: segger: configure optimization level according to gcc level.
soc: dmamux: move it from ip to soc
soc: interrupt: adjust irq api. #659
soc: improve svd file
soc: hpm_soc_feature.h: remove ADC16_SOC_TEMP_CH_EN for some specified Socs
components: enet_phy: update the common enet phy header file
components: sgtl5000 and wm8960: update clock setting
drivers: uart: update uart driver
drivers: pdma: improve quality of scale
drivers: adc: adjust wait_dis type in adc16_config_t struct
drivers: enet: update rmii reference clock setting API for ENET
utils: hpm_swap: escape for andes toolchain.
middleware: hpm_sdmmc: add spi sdcard
middleware: motor_ctrl: change the file organization
middleware: motor_ctrl: remove slide control content from foc
middleware: lvgl: upgrade to v8.3.5 (with pdma)
middleware: lvgl: Add direct mode
middleware: cherryusb: update version to v0.8.0
samples: I2S_DMA and I2S Interrupt: update sample behavior
samples: cherryusb: hid host: separate mouse and keyboard urb
samples: cherryusb: increase max interface and endpoint number Configuration
samples: cherryusb: uac2: move setting sampling freq to isr
samples: cherryusb: audio: update descriptor for identification
samples: audio_codec: set codec voice to max and increase irq priority
samples: multicore: lvgl_coremark: delete custom linker files and using andes toolchain
samples: lvgl_audio_player: update CMakeLists.txt to using noncacheable framebuffer
samples: spi: clean the redundant code
samples: i2c: improve the processing of FIFO in ISR
samples: drivers: uart: update uart_rx_timeout demo
samples: drivers: gptmr: split sample into multiple function samples
samples: drivers: adc: optimization for all macro definitions in applications
samples: drivers: adc: update struct member names
samples: update clock divider setting for ADC-related examples
samples: cherryusb: move vid/pid etc definition to usb_config.h
samples: cherryusb: device: update vid to hpmicro 0x34B7
samples: cherryusb: change API update for v0.8
samples: cherryusb: device: audiov1: change to full speed mode
samples: tinyusb: uac2: update descriptor and sample
samples: lwip: disable mmc interrupt settings
samples: lwip: lwip_ptp: v1: sync precision improvement

Added:

cmake: toolchains: add isa spec 20191213 support.
cmake: ses: support set ses raw option in CMakeLists.txt
cmake: add option to specify board search path.
cmake: generate compile_commands.json file
soc: hpm_soc_feature: add a common macro for ADC12 and ADC16
drivers: cam: add new APIs
drivers: spi: add new APIs
drivers: i2c: add new APIs
drivers: I2S: add i2s_check_data_line_status API
drivers: dma: add dma_set_transfer_src_width_byte_size() API
drivers: gptmr: add output capture APIs
drivers: gptmr: add gptmr_channel_get_dma_request_event api
drivers: adc: add adc16_trigger_pmt_by_sw API
drivers: enet: add some APIs related to interrupt settings
drivers: enet: add a new API for transmisstion
drivers: usb: add macro CONFIG_USB_DEVICE_FS to set full speed mode
components: uart_lin: add uart lin component
components: add smbus
components: add sccb
middleware: lvgl: add macro HPM_LVGL_FRAMEBUFFER_NONCACHEABLE
middleware: add AzureRTOS (threadx/usbx/netx/guix)
middleware: hpm_mcl: sensorless over-zero
middleware: add smc
middleware: hpm_sdmmc Add eMMC support
middleware: hpm_math: add bit conversion function
middleware: add uC/OS-III
middleware: cherryusb: audio: add feedback descriptor
middleware: cherryusb: audio: add param to set endpoint bmAttributes
middleware: microros: add microros foxy sources
samples: drivers: spi: add spi_sdcard_fatfs sample
samples: drivers: spi: add sd sample
samples: add uart_lin
samples: motor_ctrl: sensorless: over-zero demo
samples: cherryusb: add rndis host dhcp samples
samples: drivers: sdxc :emmc Added eMMC sample
samples: drivers: adc12: update irq pattern for sequence usage
samples: drivers: pla: add pla tamagawa demo
samples: drivers: gptmr: add counter_sync sample
samples: drivers: gptmr: add timer_basic sample
samples: drivers: gptmr: add t_shape_accel_decel sample
samples: drivers: dma/gptmr: add trigger dma transfer using gptmr event sample
samples: drivers: uart add uart_rx_timeout sample
samples: i2c: add smbus samples
samples: lwip: lwip_tcpecho_freertos: add self-adaption
samples: cherryusb: hid host: move usbh_submit_urb() out of condition
samples: cherryusb: add composite freertos sample
samples: cherryusb: add rndis freertos sample
samples: cherryusb: add msc freertos sample
samples: cherryusb: add audio v2 mic speaker freertos sample
samples: cherryusb: add hid mouse freertos sample
samples: cherryusb: add hid keyboard freertos sample
samples: cherryusb: add cdc acm freertos sample
samples: cherryusb: add rndis tcp server sample
samples: cherryusb: add rndis device udp_echo sample
samples: cherryusb: add rndis device http_server sample
samples: cherryusb: device: add audio_v2_speaker_sync sample
samples: add several uC/OS-III samples
samples: smc: add smc demo
samples: microros: add subscriber, sevice and publisher
samples: uC/OS-III: mutex

Fixed:

cmake: ses: fix __SEGGER_RTL_vfprintf issue with nds tool in SES 7.20.
soc: hpm6280: Modify the number of PWM cmps.
soc: reset.c: __dso_handle needs to be declared for nds toolchain.
soc: fix max buffer length in sequence mode for ADC
soc: HPM6750: enet soc drv: fix set clock delay settings
soc:hpm6360:sdxc Correct clock divider settting issue
drivers: pla: missing Union Field
drivers: spi: fix the problem of CMD and ADDR configuration order
drivers: i2c: fix clock frequency error rate problem
drivers: i2c: clear CMPL bit in API to avoid blocking the trans
drivers: i2c: fix i2c slave device read and write fail
drivers: i2c: fix read data unexpected multi transition.
drivers: i2c: fix w1c clear status error
driver: usb: fix w1c clear flag error
drivers: gptmr: fix dma request enum definition
drivers: adc: fix logics for judging the validity of arguments
component: uart_lin: fix break signal problem
middleware: cherryusb: fix buffer size error
middleware: lvgl: fix fbbuffer option
samples: gptmr: fix pwm_measure sample compile waring
samples: jpeg: fix interchange format of exif support
samples: jpeg: fix jpeg decode
samples: drivers: spi: fix the problem of CMD and ADDR configuration order
samples: drivers: mcan: can_fd loopback test setting is incorrect
samples: cherryusb: http_server_freertos: fix printf content error
samples: cherryusb: audio: change endpoint attributes for support MACBOOK
samples: tinyusb: msc: increase block numbers for windows format
samples: lwip: lwip_httpsrv: fix reload or refresh error

[1.1.0] - 2023-03-31:

Main changes since 1.0.0

Tested Segger Embedded Studio Version: 7.10

Changed:

docs: add new docs for rtd project.
soc: ip: enet: update the enet register file
soc: ip: adc16: update the adc16 header file
soc: hpm_romapi - Add APIs for configuring remapping, exip regions
drivers: enet: improve APIs related to PPS
drivers: adc: change adc bus blocking interface
drivers: adc: optimize getting oneshot result
drivers: src: update the default config for ADC12&ADC16
boards: rename board-level APIs related to enet
components: enet_phy: rtl8201: update the register file
middleware: hpm_math: update dsp version
middleware: erpc: update to v1.10.0
samples: uart: rename uart_dma_rx_idle to uart_software_rx_idle
samples: uart: add hardware rx idle detection sample
samples: multicore: erpc: core1 add sdk_compile_options(-O1)
samples: drivers: gptmr: update sample output.
samples: lwip: common: arch: ethernetif: update a calling function name
samples:drivers: adc: optimize oneshot handler

Added:

arch: add FPU related APIs
soc/board: add HPM6280 support
soc: HPM6750: acmp: add ACMP section
components: add mt9m114 support
drivers: add raw8 pixel format support
drivers: csr - Implement CSR driver
drivers: adc: adc16: support resolution setting
drivers/samples: add SDM/PLA/CRC/MCAN
drivers: I2C: add new API
drivers: adc: adc16: support resolution setting
drivers: enet: add enet control config for transmission
middleware: cherryusb: audio: update class driver and demo template
middleware: add mbedtls lib files with SDP acceleration
freeRTOS: add support for static allocation
samples: drivers: enet: add a pps demo
samples: cherryusb: add audio samples
samples: add the resolution parameter in all demos with ADC16
samples: add rfft demo
sampels: i2c: add interrupt b2b samples
samples: drivers: i2s: add an i2s_master demo
samples: drivers: i2s: add an i2s_slave demo
samples : rom_api : add sw_gm_api filter
samples: add the resolution parameter in all demos with ADC16

Fixed:

openocd: hpm6300evk: update sdram initialization.
drivers: trgmux: trigmux edge filter setting error
drivers: enet: fix register access error
drivers: adc16: fix the config error of ADC16_CONFIG1
drivers: i2c: fix i2c timing configuration
drivers: SPI: fix SPI status API
drivers: fix gptmr cmp value don't minus one
drivers: mcan: correct the mcan ext_id filter issue
drivers: I2C: fix issue in i2c_master_address_read API
drivers: Self_ACK cannot be set in CAN driver
drivers: rtc rtc_config_alarm always return error code
cmake: correct source code compilation
soc: toolchain: gcc: initialize heap for SES
soc: gcc linker files: add NOLOAD keyword to noncacheable.bss section
soc: HPM6360: gcc: ld: correct noncacheable region name.
drivers: qei: Fix speed display always zero
middleware: freertos: disable global irq before vTaskStartScheduler
freeRTOS: fix trap when enable float feature
freeRTOS: fix tick lost
freeRTOS: fix segger project build warning
samples: drivers: i2s: fix CFGR config
samples: drivers: fix acmp toggle error
samples: lwip: fix the DHCP issue
samples: uart: fix irq_id judgment
samples: fix the order of uart pin configuration and clock configuration
samples: update spi dma sample
samples: drivers: sysctl: correct reset enable approach.
samples: fix dma_general_transfer sample memory out of bounds
samples: drivers: wdog: Fix logic issue on finding the nearest interrupt interval
sample: audio_codec: decoder_wav: add '\0' to fatfs path

[1.00.0] - 2022-12-31:

Main changes since 0.14.0

Tested Segger Embedded Studio Version: 7.10

Changed:

boards: add version info in banner.
board: lcdc: move panel para to board
components: spi component to support to transfer different width of data in dma handshake mode
drivers: rename dram to femc
middleware: cherryusb update to v0.7.0
middleware: erpc: update for support rtos
middleware: hpm_mcl: update api naming
samples: erpc: rename erpc_matrix_multiply_rpmsg to erpc_matrix_multiply_rpmsg_bm
samples: erpc: reorganize erpc_matrix_multiply_rpmsg samples
samples: erpc: move samples folder to erpc_matrix_multiply_rpmsg
samples: update i2c/spi dma channel and dmamux channel definition
ses: project template: use demo.* as output file naming.
soc: HPM6750: toolchains: update linker files
soc: HPM6360: toolchains: update linker files

Added:

arch: riscv: add read_clear_csr() API
component: add wm8960 support
component: add usb device iso transfer support
drivers: hpm_common: include hpm_sdk_version.h.
drivers: common: add NOP and WFI.
drivers: uart: add api to recv/send byte directly.
soc: HPM6750 linker files: rename rpmsg_sh_mem to sh_mem
cmake: add sdk version header file generation.
middleware: tinyusb: add audio class
middleware: hpm_math: add NN library
samples: erpc: add erpc_two_way_rpc_rpmsg_rtos sample
samples: erpc: add erpc_matrix_multiply_rpmsg_rtos sample
samples: add power mode switch demo. #282
samples: drivers: adc: add a temperature measurement demo
samples: drviers: femc: add sram sample
samples: lwip demo for FreeRTOS
samples: lwip demo of interrupt usage
samples: tinyusb: add uac2 demo
samples: tflm: add face detection demo
samples: tflm: add MLPerf Tiny benchmark demo
samples: lwip: common: feature: add a LPI interrupt process

Fixed:

drivers:interrupt: Fix FPU context crashing in nested irq case
drivers: src: adc: fix adc result in period mode
segger: update app directory structure in SES.
soc: disable irq during cache maintenance
middleware: lvgl: fps calculation to No.
samples: get off level based on board api.
samples: multicore: hello: core1 rgb led does not change correctly.

[0.14.0] - 2022-10-31:

Main changes since 0.13.0

Tested Segger Embedded Studio Version: 6.34a

Changed:

drivers: inc: update adc driver
drivers: gptmr: update reload value
components: enet_phy: optimize APIs
components: enet_phy: dp83867: rename functions
components: conditionally add debug_console
middleware: add cherryusb (0.6.0)
middleware: littlevgl: update to v8.3.1
middleware: fatfs: file name encoding in utf-8
middleware: freertos: support nested irq handling
middleware: hpm_mcl: Optimized motor control foc speed
samples: drivers: dma src move to dma_general_transfer folder
samples: lwip: update all static addresses and all gateway addresses
samples: lwip: lwip_iperf: optimize the interactive log
samples: tinyusb: device: hid_generic_inout: optimize the python script
openocd: HPM6750A1 silicon in hpm6750-dual-core.cfg
header file: update the enet/conctl register files
header file: Update TRGMUX0 pin input source definition
header file: update the ADC12 header files
scripts: ses: organize file in ses according to real path.
cmake: split gcc and ses source
board: bump HPM6750 DCDC voltage to 1200mv

Fixed:

drivers: pdma: fix scale api issue
drivers: i2c: update DATACNT processing
drivers: i2s: fix i2s interrupt workaround in i2s_init
drivers: pwm: fix pwm capture function error
drivers: pwm: fix pwm capture configuration error
drivers: clock: fix error in clock_set_xxx_source
drivers: wdg: timeout calculation error
drivers: trgm_drv: bugfix: include error
drivers: romapi: call fencei after flash erase/write operation
drivers: watchdog: overflow
drivers: usb: host controller initialization issue
drivers: i2s: i2s_enable() issue fix
middleware: tinyusb: src: class: fix the HID report desc macro
samples: drivers: adc: optimize all ADC demos
samples: drivers: adc: fix all channel initializations without a default value
samples: motor_ctrl: hardware trigger api usage error
samples: audio_codec: update clock process for 44100 sample rate
samples: lcdc: boundary pixel is incorrenct
samples: multicore: BOOT_HEADER was missing in multicore core0 example
samples: drivers: i2s: correct audio data if depth < 32bit.
samples: hpm_math: fft_perf_test: Fix error printing information
samples: fix pdm2dao noise problem
samples: lwip: fix the enet throughput degradation
soc: correct address overlapping SES XIP linker file
soc: correct the interrupt context switch issue
soc: fix Lack of interrupt claim for swi
boards: fix some rmii reference clock APIs

Added:

boards: add hpm6750evk2 support
soc: add initfini.c
drivers: lcdc: add y8 support
drivers: spi: update data_length processing
drivers: spi: add api to enable/disable spi dma request
drivers: pmp: Add pmp_config_entry API
components: add ipc_event_mgr
component: spi: add cache maintain
middleware: add erpc
samples: lwip: support self-adaptive port speed and duplex mode
samples: jpeg: support grayscale
samples: drivers: spi: use api to get data length
samples: drivers: spi: add interrupt b2b sample
samples: drivers: mbx: add singlecore samples
samples: drivers: add dma circle transfer
samples: drivers: pwm: add pwm capture demo
samples: provide OTP API demo
samples: add cherryusb hid/msc/cdc samples
samples: add Guomi API example
samples: add erpc sample
samples: add segger_rtt

[0.13.0] - 2022-07-31:

Main changes since 0.12.1

Changed:

drivers: adc: fix sequence and preemption mode
drivers: usb: automatically change transceiver type in host mode
drivers: pwm: modify the interface for setting the pwm shadow register trigger function
drivers: sdxc: driver improvement
samples: jpeg demo update
samples: motor_ctrl: Optimize motor control performance
samples: motor_ctrl: Modify the pwm update method to be hardware triggered
samples: audio_codec: wav: Modify the interface
samples: audio_codec: add dao support
samples: tinyusb: update all USB project names
samples: adc: place DMA buffer in noncacheable
components: usb: update two struct definitions for the hcd_data_t and the dcd_data_t
middleware: littlevgl: update double buffer refresh approach.
middleware: fatfs: enable exfat format
middleware: fatfs: change 'USB' to lowercase
middleware: hpm_math: remove cache operations from the ffa interface
scripts: ses: update file path using $(HPM_SDK_BASE)

Fixed:

drivers: gpiom: fix spelling errors in API names
drivers: enet: fix ptp time offset update
drivers: cam: fix store mode configuration
drivers: can: Fix the issue can timestamp cannot be enabled
drivers: gpio: incorrect return type gpio_get_port_interrupt_flags.
middleware: audio_codec: decoder_wav: fix wav codec problem
middleware: tinyusb: fix the alignment of _hcd_data
soc: driver: clock: i2s get clock error
soc: hpm_misc.h: fix incorrect system address mapping.
soc: SVD files: fix SDP peripheral reset value problem
soc: disable vector mode explicitly.
boards: correct device name in ses project
board: correct the printf format for frequency and register base
python: fix ses project generation on windows
samples: adc: fix not working in sequence mode and preemption mode
ses: set obj path for common configuration.
cmake: ses: put app source into separate category in ses.

Added:

components: enet_phy: add rtl8211 driver
components: hpm_spi: add initial SPI component
components: add DMA Manager
drivers: cam: add new API
drivers: uart: add uart_set_baudrate API
drivers: spi: update dma transfer API
samples: tinyusb: host: add a hid demo
samples: drivers: spi: add master_trans_large_amount_of_data example
samples: decoder_wav: Add support for different bit rates and bits
samples: drivers: audio: automatic acquisition of i2s clock frequency
middleware: tinyusb: update portable file for USB host

[0.12.1] - 2022-07-01:

Main changes since 0.12.0

Fixed:

update lwipopt.h for updated enet driver

[0.12.0] - 2022-06-30:

Tested with SES 6.32

Main changes since 0.11.0

Changed:

boards: hpm6360evk has been renamed to hpm6300evk
boards: Use CSR_CYCLE in the clock_delay function
soc: hpm_soc.h: include hpm_common.h
driver: rename hpm_pmu_drv.c to hpm_pcfg_drv.h
driver: spi: change to non-blocking interfaces
driver: dma: update driver to adapt to different DMA instance constraints
components: enet_phy: update dp83867 driver
components: enet_phy: remove rtl8211 driver
cmake: enable nano newlib by default
cmake: move distclean to the beginning
middleware: littlevgl enable PDMA by default
middleware: tinyusb: upgrade to 0.13.0
samples: tinyusb: device: cdc_msc: adjust buffer size
samples: drivers: plic: use gpio toggle count as nested irq

Fixed:

drivers: pwm: fix function name inconsistency bug
drivers: enet: remove "board.h" in enet driver
drivers: clock: Fix bugs in hpm6360 clock driver
drivers: clock: returns wrong adc/dac clock in HPM6360
drivers: dram: failed to configure 8bit mode.
freertos: fix issue about running on core1
boards: hpm6300evk pmp_entry set initial value
middleware: littlevgl: fix pdma cache op issue
middleware: littlevgl: fix doxygen markdown for pdma driver
middleware: lvgl: ses: update ram linker.
middleware: hpm_math: fix ffa cache size error
samples: audio_codec: remove the wrong dependency
samples: FATFS demo cannot support write/read if FATFS passes unaligned buffer address

Added:

samples: add memstress and flash stress
drivers: clock: add implement common delay function based on mcycle and mcycleh register
boards: add hpm6300evk support
boards: hpm6750evkmini: motor control support
soc: add svd files
middleware: lwip: iperf: enable iperf and add udp function
samples: lwip: add lwip_iperf

[0.11.0] - 2022-05-31:

Main changes since 0.10.0-hpm6360-er

Changed:

readme: change the location of the starting document
components: change hal_adc_xx to hpm_adc_xx
drivers: update the I2C driver
cmake: change default rv_arch to rv32imac
cmake: modified in a zephyr-compatible way
drivers: uart: redefined struct with zephyr
cmake: change soc and board name
cmake: ses: support enable ext_dsp in project file.
samples/tinyusb/host: optimize the toggle rate of the blinking led
samples/tinyusb/device: replace mchtimer with board_timer for led_linking_taskk
samples/tinyusb/device: optimize the implement of led_blinking_task
soc: update IP header and soc header files

Fixed:

samples: motor_ctrl: bldc_block: fix some error
middleware: hpm_math: fix andes toolchain compile error
middleware: hpm_math: fix libdsp.a error
middleware: hpm_math: add ext-dsp for SES
samples: openocd_algo: fix func_table placement.
boards: hpm6360evk: correct cpu frequency
boards: fix warning caused by code irregularities
boards: LED status is not the same between hpm6750mini rev-A and rev-B
boards: update board_led_write.

Added:

driver: add spi_setup_dma_transfer() API
middleware: hpm_math: add software fft function
middleware: hpm_math: add ffa to hpm_math
samples: i2c: update the sample b2b
samples: hpm_math: add fft_performance demo
samples: add SPI DMA sample
samples: multicore coremark using debug console only
samples: 1588: add ptp v1 master/slave

[0.10.0_hpm6300] - 2022-05-16:

Main changes since 0.10.0

Changed:

ip register header file update
ses_proj: using generated complete cpu_regs_xml to replace general cpu registers xml
drivers: gpiom: move gpiom_gpio_t into hpm_gpiom_src.h
drivers: update the enet driver
samples: dram: change sdram test address in dma demo
samples: drivers: mbx: exclude flash targets for core0 as well.
samples: lwip: update ethernetif.c

Fixed:

drivers: ptpc: update ptpc_init_timer_with_initial.
drivers: can: bug fix and update
soc: correct vector table inclusion and swi name
env.sh: fix HPM_SDK_BASE setting problem with msys.
samples: sha256_example: failed to run case 13 and 14 with gcc.

Added:

soc: add HPM6360 support
drivers: add ffa, pllctlv2, dac
boards: add hpm6360evk support
components: add adcx module
components/enet_phy: add the RTL8201 driver
samples: drivers: dac, ffa
samples: rgb_red: add evkmini ver B support

[0.10.0] - 2022-04-30:

Main changes since 0.9.0

Changed:

drivers: gptmr: split irq enable/disable interface
drivers: can: 155 Update SJW setting in CAN driver
soc: HPM6750: rename safe stack symbol in link script
components: debug_console: wait uart tx flag on writing.

Added:

drivers: enet: add 1588 support
drivers: can: Add TDC support
drivers: mchtmr: add counter init API.
drivers: dma: add dma_disable_channel() API
middleware: add wav decoder
samples: lwip: add ptp demos
samples: tinyusb: add msc, cdc demo
samples: audio_codec: add wav player demo
samples: add tinyuf2 initial support
samples: add initial uart dma rx idle demo

Fixed:

soc: HPM6750: sysctl: fix cpu lp mode API.
drivers: uart: correct baudrate calculation.
drivers: usb: fix: no response in device mode when a USB cable is pluged out
boards: correct the pin setting related to USB

[0.9.0] - 2022-04-01:

Main changes since 0.8.0

Changed:

drivers: update WDG, UART, DMA, DMAMUX driver
drivers: enet remove enet_intf_selection
drivers: can: support configure bit timing via low-level bit timing parameters
drivers: optimize gpio driver
samples: exclude flash targets for mbx core1
samples: adjust SES project setting for coremark
samples: jpeg: update and integration jpeg decode samples
ses: use relpath for linker script in project file
ses: add HPM device name in generated project file
soc: HPM6750: add an interface selection api

Added:

soc: HPM6750: add ram linker for core1
ses: support to use Andes toolchain
middleware: add hpm_math (replacing hpm_dsp)
samples: add lwip httpd
drivers: add section and alignment general instructions in hpm_common.h

Fixed:

boards: hpm6750evk: fix bldc adc pinmux error
boards : hpm6750evk : pinmux : fix spi init pins error
samples: sdp: fix non-cacheable data initialization issue
samples: littlevgl: fix wrong picture patch in README

[0.8.0] - 2022-03-04:

All changes since 0.7.3

Changed:

rename middleware/sdmmc to middleware/hpm_sdmmc
place isr into .isr_vector section for irq non-vector mode
change csr functions to support llvm

Fixed:

ses: fix issue in register xml
freertor: fix trap handler at non-vector mode
sdxc: fix software reset issue

Added:

add sdk doc
add more sample doc
add multicore demo
i2c/uart: add dma support
add tensorflow lite for microcontroller

[0.7.3] - 2022-02-23:

All changes since 0.7.2

Changed:

freertos: change exception handling

[0.7.2] - 2022-02-21:

All changes since 0.7.1

Changed:

freertos: change freertos irq stack definition, passed in CMakeLists.txt, defined in linker
soc: hpm6750: add DISABLE_IRQ_PREEMPTIVE to check if it needs to enable irq preemption

Fixed:

freertos: disable irq preemption

[0.7.1] - 2022-02-13:

All changes since 0.7.0

Changed:

drivers: adc12: update adc12_prd_config_t
samples: can: update case with interrupt and communication between two boards

Fixed:

drivers: can: fix blocking transcation issue
samples: mbx: support run this example in SES
SES: startup: add fpu enable if abi is set to enable hw fp

Added:

samples: multicore: add flash based multicore example
drivers: can: add apis to recvieve message for non-blocking use

[0.7.0] - 2022-01-30:

All changes since 0.6.2

Changed:

update default CPU frequency to 816MHz from 648MHz
update the ip headers
drivers: gpio: replace gpio_XXX_pins with gpio_XXX_port
drivers: gpio: remove pin level enum definition
drivers: i2s: driver update to remove mclk_div
drivers: ptpc: update driver
drivers: common: update get first set bit API
drivers: uart: split one enable with parameter into enable and disable interfaces
drivers: pwm: change name of output_channel config API
drivers: trgm: split separate API to enable/disable io output
soc: HPM6750: initialize noncacheable data in startup
soc: HPM6750: l1c: update fence.i call
samples: hello_world: add LED flashing
samples: littlevgl: remove lvgl example

Fixed:

hpm6750evkmini: correct refresh cycle number of sdram
hpm6750evkmini: Fix the SDRAM memory range issue in flash_sdram_xip linker file
SES: remove no_relax option for linker, since segger has provide a patch to its ld for ses v6.10.
drivers: gpio: fix read pin issue:
drivers: usb: fix usb disconnection under linux environment
drivers: sdxc: Fixed the compatibility issue on different SD/eMMC cards in the sdcard_fatfs demo
drivers: gptmr: incorrect DMAEN configuration condition
drivers: gptmr: clear CNTRST bit after set.
SDK_DECLARE_EXT_ISR_M cannot work in the c++ file
FreeRTOS: fix ISR_STACK setting
components: touch: gt911: fix gpio write pin call

Added:

SEG: add register definition file in generated embedded studio project
samples: drivers: gpiom: Add example to demonstrate gpiom's function
drivers: common: add macro to put data into noncacheable sections
middleware: integrate lwip

74 KiB Raw Blame History Unescape Escape

Change Log

[1.6.0] - 2024-06-28:

Known Issue:

Changed:

Fixed:

Added:

[1.5.0] - 2024-03-29:

Known Issue:

Changed:

Added:

Fixed:

[1.4.0] - 2023-12-29:

Changed:

Added:

Fixed:

[1.3.0] - 2023-09-28:

Changed:

Added:

Fixed:

[1.2.0] - 2023-06-30:

Changed:

Added:

Fixed:

[1.1.0] - 2023-03-31:

Changed:

Added:

Fixed:

[1.00.0] - 2022-12-31:

Changed:

Added:

Fixed:

[0.14.0] - 2022-10-31:

Changed:

Fixed:

Added:

[0.13.0] - 2022-07-31:

Changed:

Fixed:

Added:

[0.12.1] - 2022-07-01:

Fixed:

[0.12.0] - 2022-06-30:

Changed:

Fixed:

Added:

[0.11.0] - 2022-05-31:

Changed:

Fixed:

Added:

[0.10.0_hpm6300] - 2022-05-16:

Changed:

Fixed:

Added:

[0.10.0] - 2022-04-30:

Changed:

Added:

Fixed:

[0.9.0] - 2022-04-01:

Changed:

Added:

Fixed:

[0.8.0] - 2022-03-04:

Changed:

Fixed:

Added:

[0.7.3] - 2022-02-23:

Changed:

[0.7.2] - 2022-02-21:

Changed:

Fixed:

[0.7.1] - 2022-02-13:

Changed:

Fixed:

Added:

[0.7.0] - 2022-01-30:

Changed:

Fixed:

Added:

74 KiB

Raw Blame History