454 lines
13 KiB
C
454 lines
13 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_itm.c
|
|
//! @file
|
|
//!
|
|
//! @brief Functions for operating the instrumentation trace macrocell
|
|
//!
|
|
//! @addtogroup itm2 Instrumentation Trace Macrocell (ITM)
|
|
//! @ingroup apollo2hal
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2017, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 1.2.9 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "am_mcu_apollo.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Global Variables
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Delays for a desired amount of microseconds.
|
|
//!
|
|
//! @note - This function is based on the similar function in am_util_delay.c,
|
|
//! please see that module for implementation details. It was necessary to
|
|
//! duplicate it here to avoid having to update every example to include the
|
|
//! am_util_delay.c module in its build.
|
|
//!
|
|
//! @returns None
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_delay_us(uint32_t ui32MicroSeconds)
|
|
{
|
|
uint32_t ui32Iterations = ui32MicroSeconds *
|
|
(am_hal_clkgen_sysclk_get() / 3000000);
|
|
|
|
//
|
|
// Call the BOOTROM cycle delay function
|
|
//
|
|
am_hal_flash_delay(ui32Iterations);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enables the ITM
|
|
//!
|
|
//! This function enables the ARM ITM by setting the TRCENA bit in the DEMCR
|
|
//! register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_enable(void)
|
|
{
|
|
if (g_ui32HALflags & AM_HAL_FLAGS_ITMSKIPENABLEDISABLE_M)
|
|
{
|
|
return;
|
|
}
|
|
|
|
//
|
|
// To be able to access ITM registers, set the Trace Enable bit
|
|
// in the Debug Exception and Monitor Control Register (DEMCR).
|
|
//
|
|
AM_REG(SYSCTRL, DEMCR) |= AM_REG_SYSCTRL_DEMCR_TRCENA(1);
|
|
while ( !(AM_REG(SYSCTRL, DEMCR) & AM_REG_SYSCTRL_DEMCR_TRCENA(1)) );
|
|
|
|
//
|
|
// Write the key to the ITM Lock Access register to unlock the ITM_TCR.
|
|
//
|
|
AM_REGVAL(AM_REG_ITM_LOCKAREG_O) = AM_REG_ITM_LOCKAREG_KEYVAL;
|
|
|
|
//
|
|
// Set the enable bits in the ITM trace enable register, and the ITM
|
|
// control registers to enable trace data output.
|
|
//
|
|
AM_REGVAL(AM_REG_ITM_TPR_O) = 0x0000000f;
|
|
AM_REGVAL(AM_REG_ITM_TER_O) = 0xffffffff;
|
|
|
|
//
|
|
// Write to the ITM control and status register (don't enable yet).
|
|
//
|
|
AM_REGVAL(AM_REG_ITM_TCR_O) =
|
|
AM_WRITE_SM(AM_REG_ITM_TCR_ATB_ID, 0x15) |
|
|
AM_WRITE_SM(AM_REG_ITM_TCR_TS_FREQ, 1) |
|
|
AM_WRITE_SM(AM_REG_ITM_TCR_TS_PRESCALE, 1) |
|
|
AM_WRITE_SM(AM_REG_ITM_TCR_SWV_ENABLE, 1) |
|
|
AM_WRITE_SM(AM_REG_ITM_TCR_DWT_ENABLE, 0) |
|
|
AM_WRITE_SM(AM_REG_ITM_TCR_SYNC_ENABLE, 0) |
|
|
AM_WRITE_SM(AM_REG_ITM_TCR_TS_ENABLE, 0) |
|
|
AM_WRITE_SM(AM_REG_ITM_TCR_ITM_ENABLE, 1);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disables the ITM
|
|
//!
|
|
//! This function completely disables the ARM ITM by resetting the TRCENA bit
|
|
//! in the DEMCR register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_disable(void)
|
|
{
|
|
|
|
if (g_ui32HALflags & AM_HAL_FLAGS_ITMSKIPENABLEDISABLE_M)
|
|
{
|
|
return;
|
|
}
|
|
|
|
//
|
|
// Make sure the ITM_TCR is unlocked.
|
|
//
|
|
AM_REGVAL(AM_REG_ITM_LOCKAREG_O) = AM_REG_ITM_LOCKAREG_KEYVAL;
|
|
|
|
//
|
|
// Make sure the ITM/TPIU is not busy.
|
|
//
|
|
while ( AM_REG(ITM, TCR) & AM_REG_ITM_TCR_BUSY(1) );
|
|
|
|
//
|
|
// Disable the ITM.
|
|
//
|
|
for (int ix = 0; ix < 100; ix++)
|
|
{
|
|
AM_REG(ITM, TCR) &= ~AM_REG_ITM_TCR_ITM_ENABLE(1);
|
|
while ( AM_REG(ITM, TCR) & (AM_REG_ITM_TCR_ITM_ENABLE(1) | AM_REG_ITM_TCR_BUSY(1)) );
|
|
}
|
|
|
|
//
|
|
// Reset the TRCENA bit in the DEMCR register, which should disable the ITM
|
|
// for operation.
|
|
//
|
|
AM_REG(SYSCTRL, DEMCR) &= ~AM_REG_SYSCTRL_DEMCR_TRCENA(1);
|
|
|
|
//
|
|
// Disable the TPIU clock source in MCU control.
|
|
//
|
|
AM_REG(MCUCTRL, TPIUCTRL) = AM_REG_MCUCTRL_TPIUCTRL_CLKSEL_0MHz |
|
|
AM_REG_MCUCTRL_TPIUCTRL_ENABLE_DIS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Checks if itm is busy and provides a delay to flush the fifo
|
|
//!
|
|
//! This function disables the ARM ITM by resetting the TRCENA bit in the DEMCR
|
|
//! register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_not_busy(void)
|
|
{
|
|
//
|
|
// Make sure the ITM/TPIU is not busy.
|
|
//
|
|
while (AM_REG(ITM, TCR) & AM_REG_ITM_TCR_BUSY(1));
|
|
|
|
//
|
|
// wait for 50us for the data to flush out
|
|
//
|
|
am_hal_itm_delay_us(50);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enables tracing on a given set of ITM ports
|
|
//!
|
|
//! @param ui8portNum - Set ports to be enabled
|
|
//!
|
|
//! Enables tracing on the ports referred to by \e ui8portNum by writing the
|
|
//! associated bit in the Trace Privilege Register in the ITM. The value for
|
|
//! ui8portNum should be the logical OR one or more of the following values:
|
|
//!
|
|
//! \e ITM_PRIVMASK_0_7 - enable ports 0 through 7
|
|
//! \e ITM_PRIVMASK_8_15 - enable ports 8 through 15
|
|
//! \e ITM_PRIVMASK_16_23 - enable ports 16 through 23
|
|
//! \e ITM_PRIVMASK_24_31 - enable ports 24 through 31
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_trace_port_enable(uint8_t ui8portNum)
|
|
{
|
|
AM_REGVAL(AM_REG_ITM_TPR_O) |= (0x00000001 << (ui8portNum>>3));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable tracing on the given ITM stimulus port.
|
|
//!
|
|
//! @param ui8portNum
|
|
//!
|
|
//! Disables tracing on the ports referred to by \e ui8portNum by writing the
|
|
//! associated bit in the Trace Privilege Register in the ITM. The value for
|
|
//! ui8portNum should be the logical OR one or more of the following values:
|
|
//!
|
|
//! \e ITM_PRIVMASK_0_7 - disable ports 0 through 7
|
|
//! \e ITM_PRIVMASK_8_15 - disable ports 8 through 15
|
|
//! \e ITM_PRIVMASK_16_23 - disable ports 16 through 23
|
|
//! \e ITM_PRIVMASK_24_31 - disable ports 24 through 31
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_trace_port_disable(uint8_t ui8portNum)
|
|
{
|
|
AM_REGVAL(AM_REG_ITM_TPR_O) &= ~(0x00000001 << (ui8portNum >> 3));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Poll the given ITM stimulus register until not busy.
|
|
//!
|
|
//! @param ui32StimReg - stimulus register
|
|
//!
|
|
//! @return true if not busy, false if busy (timed out or other error).
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
am_hal_itm_stimulus_not_busy(uint32_t ui32StimReg)
|
|
{
|
|
uint32_t ui32StimAddr = (AM_REG_ITM_STIM0_O + (4 * ui32StimReg));
|
|
|
|
//
|
|
// Busy waiting until it is available, non-zero means ready.
|
|
//
|
|
while (!AM_REGVAL(ui32StimAddr));
|
|
|
|
return true;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Writes a 32-bit value to the given ITM stimulus register.
|
|
//!
|
|
//! @param ui32StimReg - stimulus register
|
|
//! @param ui32Value - value to be written.
|
|
//!
|
|
//! Write a word to the desired stimulus register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_stimulus_reg_word_write(uint32_t ui32StimReg, uint32_t ui32Value)
|
|
{
|
|
uint32_t ui32StimAddr;
|
|
|
|
ui32StimAddr = (AM_REG_ITM_STIM0_O + (4 * ui32StimReg));
|
|
|
|
//
|
|
// Busy waiting until it is available, non-zero means ready
|
|
//
|
|
while (!AM_REGVAL(ui32StimAddr));
|
|
|
|
//
|
|
// Write the register.
|
|
//
|
|
AM_REGVAL(ui32StimAddr) = ui32Value;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Writes a short to the given ITM stimulus register.
|
|
//!
|
|
//! @param ui32StimReg - stimulus register
|
|
//! @param ui16Value - short to be written.
|
|
//!
|
|
//! Write a short to the desired stimulus register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_stimulus_reg_short_write(uint32_t ui32StimReg, uint16_t ui16Value)
|
|
{
|
|
uint32_t ui32StimAddr;
|
|
|
|
ui32StimAddr = (AM_REG_ITM_STIM0_O + (4 * ui32StimReg));
|
|
|
|
//
|
|
// Busy waiting until it is available non-zero means ready
|
|
//
|
|
while (!AM_REGVAL(ui32StimAddr));
|
|
|
|
//
|
|
// Write the register.
|
|
//
|
|
*((volatile uint16_t *) ui32StimAddr) = ui16Value;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Writes a byte to the given ITM stimulus register.
|
|
//!
|
|
//! @param ui32StimReg - stimulus register
|
|
//! @param ui8Value - byte to be written.
|
|
//!
|
|
//! Write a byte to the desired stimulus register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_stimulus_reg_byte_write(uint32_t ui32StimReg, uint8_t ui8Value)
|
|
{
|
|
uint32_t ui32StimAddr;
|
|
|
|
ui32StimAddr = (AM_REG_ITM_STIM0_O + (4 * ui32StimReg));
|
|
|
|
//
|
|
// Busy waiting until it is available (non-zero means ready)
|
|
//
|
|
while (!AM_REGVAL(ui32StimAddr));
|
|
|
|
//
|
|
// Write the register.
|
|
//
|
|
*((volatile uint8_t *) ui32StimAddr) = ui8Value;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Sends a Sync Packet.
|
|
//!
|
|
//! Sends a sync packet. This can be useful for external software should it
|
|
//! become out of sync with the ITM stream.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_sync_send(void)
|
|
{
|
|
//
|
|
// Write the register.
|
|
//
|
|
am_hal_itm_stimulus_reg_word_write(AM_HAL_ITM_SYNC_REG,
|
|
AM_HAL_ITM_SYNC_VAL);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Poll the print stimulus registers until not busy.
|
|
//!
|
|
//! @return true if not busy, false if busy (timed out or other error).
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
am_hal_itm_print_not_busy(void)
|
|
{
|
|
//
|
|
// Poll stimulus register allocated for printing.
|
|
//
|
|
am_hal_itm_stimulus_not_busy(0);
|
|
|
|
|
|
return true;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Prints a char string out of the ITM.
|
|
//!
|
|
//! @param pcString pointer to the character sting
|
|
//!
|
|
//! This function prints a sting out of the ITM.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_itm_print(char *pcString)
|
|
{
|
|
uint32_t ui32Length = 0;
|
|
|
|
//
|
|
// Determine the length of the string.
|
|
//
|
|
while (*(pcString + ui32Length))
|
|
{
|
|
ui32Length++;
|
|
}
|
|
|
|
//
|
|
// If there is no longer a word left, empty out the remaining characters.
|
|
//
|
|
while (ui32Length)
|
|
{
|
|
//
|
|
// Print string out the ITM.
|
|
//
|
|
am_hal_itm_stimulus_reg_byte_write(0, (uint8_t)*pcString++);
|
|
|
|
//
|
|
// Subtract from length.
|
|
//
|
|
ui32Length--;
|
|
}
|
|
}
|
|
//*****************************************************************************
|
|
//
|
|
// End Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|