74 lines
5.5 KiB
Markdown
74 lines
5.5 KiB
Markdown
# The Arduino Compatible for STM32F401 Nucleo Board
|
|
|
|
**English** | [中文](README_zh.md)
|
|
|
|
## 1 RTduino - Arduino Ecosystem Compatibility Layer for RT-Thread
|
|
|
|
STM32F401 Nucleo board has support [RTduino](https://github.com/RTduino/RTduino). Users can use Arduino APIs, third party libraries and programming method to program on the board.
|
|
|
|
### 1.1 How to Enable RTduino
|
|
|
|
Please go to the [RTduino repository](https://github.com/RTduino/RTduino) to see the details.
|
|
|
|
```Kconfig
|
|
Hardware Drivers Config --->
|
|
Onboard Peripheral Drivers --->
|
|
[*] Compatible with Arduino Ecosystem (RTduino)
|
|
```
|
|
|
|
# 2 Arduino Pinout
|
|
|
|
|
|
|
|
This board complies with Arduino UNO pins layout. For more details, please take a look at: [pins_arduino.c](pins_arduino.c) and [pins_arduino.h](pins_arduino.h).
|
|
|
|
| Arduino Pin | STM32 Pin | 5V Tolerate | Note |
|
|
| --------------------- | --------- | ----------- | --------------------------------------------------------------------------------------------- |
|
|
| 0 (D0) | PA3 | Yes | Serial-Rx. Token over by RT-Thread UART device by default |
|
|
| 1 (D1) | PA2 | Yes | Serial-Tx. Token over by RT-Thread UART device by default |
|
|
| 2 (D2) | PA10 | Yes | |
|
|
| 3 (D3) | PB3 | Yes | PWM2-CH2. Token over by RT-Thread PWM device by default |
|
|
| 4 (D4) | PB5 | Yes | |
|
|
| 5 (D5) | PB4 | Yes | PWM3-CH1. Token over by RT-Thread PWM device by default |
|
|
| 6 (D6) | PB10 | Yes | PWM2-CH3. Token over by RT-Thread PWM device by default |
|
|
| 7 (D7) | PA8 | Yes | |
|
|
| 8 (D8) | PA9 | Yes | |
|
|
| 9 (D9) | PC7 | Yes | PWM3-CH2. Token over by RT-Thread PWM device by default |
|
|
| 10 (D10) | PB6 | Yes | PWM4-CH1. Token over by RT-Thread PWM device by default |
|
|
| 11 (D11) | PA7 | Yes | PWM1-CH1N. Token over by RT-Thread PWM device by default |
|
|
| 12 (D12) | PA6 | Yes | |
|
|
| 13 (D13, LED_BUILTIN) | PA5 | Yes | USER LED |
|
|
| 14 (D14) | PB9 | Yes | I2C-SDA. Token over by RT-Thread I2C device by default |
|
|
| 15 (D15) | PB8 | Yes | I2C-SCL. Token over by RT-Thread I2C device by default |
|
|
| 16 (D16) | PC13 | Yes | USER Button |
|
|
| A0 | PA0 | Yes | ADC1-CH0. Token over by RT-Thread ADC device by default |
|
|
| A1 | PA1 | Yes | ADC1-CH1. Token over by RT-Thread ADC device by default |
|
|
| A2 | PA4 | Yes | ADC1-CH4. Token over by RT-Thread ADC device by default |
|
|
| A3 | PB0 | Yes | ADC1-CH8. Token over by RT-Thread ADC device by default |
|
|
| A4 | PC1 | Yes | ADC1-CH11. Token over by RT-Thread ADC device by default |
|
|
| A5 | PC0 | Yes | ADC1-CH10. Token over by RT-Thread ADC device by default |
|
|
| A6 | -- | | On-chip internal voltage sensor. ADC1-CH17. Token over by RT-Thread ADC device by default |
|
|
| A7 | -- | | On-chip internal temperature sensor. ADC1-CH16. Token over by RT-Thread ADC device by default |
|
|
|
|
> Notice:
|
|
>
|
|
> 1. Don't use a same hardware timer to drive PWM (analogRead) and servos at same time, because hardware timers can only generate a same frequency for 4 PWM channels. Otherwise, it could cause a failure when drive servos.
|
|
|
|
> References
|
|
>
|
|
> 1. [STM32 Nucleo-64 user manual](https://www.st.com/resource/en/user_manual/um1724-stm32-nucleo64-boards-mb1136-stmicroelectronics.pdf)
|
|
|
|
## 3 Communication
|
|
|
|
### 3.1 I2C Bus
|
|
|
|
I2C bus is `SCL/D15` and `SDA/D14` pins. Users can directly include the `#include <Wire.h>`, which is the Arduino official I2C header file, to use the I2C bus.
|
|
|
|
### 3.2 SPI Bus
|
|
|
|
This board doesn't support Arduino SPI header file and functions.
|
|
|
|
### 3.3 Serial
|
|
|
|
This board supports to use `Serial.` method to operate `uart2` device. See [example](https://github.com/RTduino/RTduino/blob/master/examples/Basic/helloworld.cpp).
|