401 lines
10 KiB
C
401 lines
10 KiB
C
/*
|
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2018-11-16 bluebear233 first version
|
|
*/
|
|
|
|
|
|
#include <rtconfig.h>
|
|
#include <rtdevice.h>
|
|
#include <drv_uart.h>
|
|
#include "NuMicro.h"
|
|
|
|
/* Private Define ---------------------------------------------------------------*/
|
|
#define USEING_UART0 //Tx:PB13 Rx:PB12
|
|
|
|
/* Private Typedef --------------------------------------------------------------*/
|
|
struct usart
|
|
{
|
|
rt_serial_t dev;
|
|
UART_T *usart_base;
|
|
};
|
|
typedef struct usart* usart_t;
|
|
|
|
/* Private functions ------------------------------------------------------------*/
|
|
|
|
|
|
static rt_err_t usart_gpio_configure(struct rt_serial_device *serial);
|
|
static rt_err_t usart_configure(struct rt_serial_device *serial, struct serial_configure *cfg);
|
|
static rt_err_t usart_control(struct rt_serial_device *serial, int cmd, void *arg);
|
|
static int usart_send(struct rt_serial_device *serial, char c);
|
|
static int usart_receive(struct rt_serial_device *serial);
|
|
static void rt_hw_uart_register(usart_t uart, UART_T *uart_base,
|
|
char *name);
|
|
static void uart_isr(usart_t serial);
|
|
|
|
/* Private Variables ------------------------------------------------------------*/
|
|
static const struct rt_uart_ops m487_uart_ops =
|
|
{ usart_configure, usart_control, usart_send, usart_receive,
|
|
RT_NULL };
|
|
|
|
static const struct serial_configure m487_uart_default_config =
|
|
RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
#ifdef USEING_UART0
|
|
struct usart uart0;
|
|
#endif
|
|
|
|
/* Interrupt Handle Funtion ----------------------------------------------------*/
|
|
#ifdef USEING_UART0
|
|
/* 串口0 中断入口 */
|
|
void UART0_IRQHandler(void)
|
|
{
|
|
uart_isr(&uart0);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* 中断处理函数
|
|
*/
|
|
static void uart_isr(usart_t serial)
|
|
{
|
|
// 获取串口基地址
|
|
UART_T *uart_base = ((usart_t)serial)->usart_base;
|
|
|
|
// 获取中断事件
|
|
uint32_t u32IntSts= uart_base->INTSTS;
|
|
|
|
// 接收中断
|
|
if(u32IntSts & (UART_INTSTS_RDAINT_Msk | UART_INTSTS_RXTOINT_Msk))
|
|
{
|
|
rt_hw_serial_isr(&serial->dev, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* 串口端口配置
|
|
*/
|
|
static rt_err_t usart_gpio_configure(struct rt_serial_device *serial)
|
|
{
|
|
// 获取串口基地址
|
|
UART_T *uart_base = ((usart_t)serial)->usart_base;
|
|
|
|
switch((uint32_t)uart_base)
|
|
{
|
|
case UART0_BASE:
|
|
SYS->GPB_MFPH &= ~(SYS_GPB_MFPH_PB12MFP_Msk | SYS_GPB_MFPH_PB13MFP_Msk);
|
|
SYS->GPB_MFPH |= (SYS_GPB_MFPH_PB12MFP_UART0_RXD | SYS_GPB_MFPH_PB13MFP_UART0_TXD);
|
|
break;
|
|
|
|
default:
|
|
rt_kprintf("unknow uart module\n");
|
|
RT_ASSERT(0);
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/**
|
|
* 串口配置
|
|
*/
|
|
static rt_err_t usart_configure(struct rt_serial_device *serial,
|
|
struct serial_configure *cfg)
|
|
{
|
|
// 获取串口基地址
|
|
UART_T *uart_base = ((usart_t)serial)->usart_base;
|
|
|
|
uint32_t uart_module = 0;
|
|
uint32_t uart_word_len = 0;
|
|
uint32_t uart_stop_bit = 0;
|
|
uint32_t uart_parity = 0;
|
|
IRQn_Type uart_irq_channel = 0;
|
|
|
|
switch((uint32_t)uart_base)
|
|
{
|
|
case UART0_BASE:
|
|
uart_module = UART0_MODULE;
|
|
uart_irq_channel = UART0_IRQn;
|
|
break;
|
|
|
|
default:
|
|
rt_kprintf("unknow uart module\n");
|
|
RT_ASSERT(0);
|
|
}
|
|
|
|
/* Enable IP clock */
|
|
CLK_EnableModuleClock(uart_module);
|
|
|
|
/* Select IP clock source */
|
|
CLK_SetModuleClock(uart_module, CLK_CLKSEL1_UART0SEL_HXT, CLK_CLKDIV0_UART0(1));
|
|
|
|
/* check baudrate */
|
|
RT_ASSERT(cfg->baud_rate != 0);
|
|
|
|
/* check word len */
|
|
switch(cfg->data_bits)
|
|
{
|
|
case DATA_BITS_5:
|
|
uart_word_len = UART_WORD_LEN_5;
|
|
break;
|
|
|
|
case DATA_BITS_6:
|
|
uart_word_len = UART_WORD_LEN_6;
|
|
break;
|
|
|
|
case DATA_BITS_7:
|
|
uart_word_len = UART_WORD_LEN_7;
|
|
break;
|
|
|
|
case DATA_BITS_8:
|
|
uart_word_len = UART_WORD_LEN_8;
|
|
break;
|
|
|
|
default:
|
|
rt_kprintf("unsupose data len");
|
|
RT_ASSERT(0);
|
|
}
|
|
|
|
/* check stop bit */
|
|
switch(cfg->stop_bits)
|
|
{
|
|
case STOP_BITS_1:
|
|
uart_stop_bit = UART_STOP_BIT_1;
|
|
break;
|
|
|
|
case STOP_BITS_2:
|
|
uart_stop_bit = UART_STOP_BIT_2;
|
|
break;
|
|
|
|
default:
|
|
rt_kprintf("unsupose stop bit");
|
|
RT_ASSERT(0);
|
|
}
|
|
|
|
/* check stop bit */
|
|
switch(cfg->parity)
|
|
{
|
|
case PARITY_NONE:
|
|
uart_parity = UART_PARITY_NONE;
|
|
break;
|
|
|
|
case PARITY_ODD:
|
|
uart_parity = UART_PARITY_ODD;
|
|
break;
|
|
|
|
case PARITY_EVEN:
|
|
uart_parity = UART_PARITY_EVEN;
|
|
break;
|
|
|
|
default:
|
|
rt_kprintf("unsupose parity");
|
|
RT_ASSERT(0);
|
|
}
|
|
|
|
/* Open uart */
|
|
{
|
|
uint32_t u32UartClkSrcSel=0ul, u32UartClkDivNum=0ul;
|
|
uint32_t u32ClkTbl[4] = {__HXT, 0ul, __LXT, __HIRC};
|
|
uint32_t u32Baud_Div = 0ul;
|
|
|
|
if(uart_base == (UART_T*)UART0 )
|
|
{
|
|
/* Get UART clock source selection */
|
|
u32UartClkSrcSel = ((uint32_t)(CLK->CLKSEL1 & CLK_CLKSEL1_UART0SEL_Msk)) >> CLK_CLKSEL1_UART0SEL_Pos;
|
|
/* Get UART clock divider number */
|
|
u32UartClkDivNum = (CLK->CLKDIV0 & CLK_CLKDIV0_UART0DIV_Msk) >> CLK_CLKDIV0_UART0DIV_Pos;
|
|
}
|
|
else if(uart_base == (UART_T*)UART1 )
|
|
{
|
|
/* Get UART clock source selection */
|
|
u32UartClkSrcSel = (CLK->CLKSEL1 & CLK_CLKSEL1_UART1SEL_Msk) >> CLK_CLKSEL1_UART1SEL_Pos;
|
|
/* Get UART clock divider number */
|
|
u32UartClkDivNum = (CLK->CLKDIV0 & CLK_CLKDIV0_UART1DIV_Msk) >> CLK_CLKDIV0_UART1DIV_Pos;
|
|
}
|
|
else if(uart_base == (UART_T*)UART2 )
|
|
{
|
|
/* Get UART clock source selection */
|
|
u32UartClkSrcSel = (CLK->CLKSEL3 & CLK_CLKSEL3_UART2SEL_Msk) >> CLK_CLKSEL3_UART2SEL_Pos;
|
|
/* Get UART clock divider number */
|
|
u32UartClkDivNum = (CLK->CLKDIV4 & CLK_CLKDIV4_UART2DIV_Msk) >> CLK_CLKDIV4_UART2DIV_Pos;
|
|
}
|
|
else if(uart_base == (UART_T*)UART3 )
|
|
{
|
|
/* Get UART clock source selection */
|
|
u32UartClkSrcSel = (CLK->CLKSEL3 & CLK_CLKSEL3_UART3SEL_Msk) >> CLK_CLKSEL3_UART3SEL_Pos;
|
|
/* Get UART clock divider number */
|
|
u32UartClkDivNum = (CLK->CLKDIV4 & CLK_CLKDIV4_UART3DIV_Msk) >> CLK_CLKDIV4_UART3DIV_Pos;
|
|
}
|
|
else if(uart_base == (UART_T*)UART4 )
|
|
{
|
|
/* Get UART clock source selection */
|
|
u32UartClkSrcSel = (CLK->CLKSEL3 & CLK_CLKSEL3_UART4SEL_Msk) >> CLK_CLKSEL3_UART4SEL_Pos;
|
|
/* Get UART clock divider number */
|
|
u32UartClkDivNum = (CLK->CLKDIV4 & CLK_CLKDIV4_UART4DIV_Msk) >> CLK_CLKDIV4_UART4DIV_Pos;
|
|
}
|
|
else if(uart_base == (UART_T*)UART5 )
|
|
{
|
|
/* Get UART clock source selection */
|
|
u32UartClkSrcSel = (CLK->CLKSEL3 & CLK_CLKSEL3_UART5SEL_Msk) >> CLK_CLKSEL3_UART5SEL_Pos;
|
|
/* Get UART clock divider number */
|
|
u32UartClkDivNum = (CLK->CLKDIV4 & CLK_CLKDIV4_UART5DIV_Msk) >> CLK_CLKDIV4_UART5DIV_Pos;
|
|
}
|
|
|
|
/* Select UART function */
|
|
uart_base->FUNCSEL = UART_FUNCSEL_UART;
|
|
|
|
/* Set UART line configuration */
|
|
uart_base->LINE = uart_word_len | uart_stop_bit | uart_parity;
|
|
|
|
/* Set UART Rx and RTS trigger level */
|
|
uart_base->FIFO &= ~(UART_FIFO_RFITL_Msk | UART_FIFO_RTSTRGLV_Msk);
|
|
|
|
/* Get PLL clock frequency if UART clock source selection is PLL */
|
|
if(u32UartClkSrcSel == 1ul)
|
|
{
|
|
u32ClkTbl[u32UartClkSrcSel] = CLK_GetPLLClockFreq();
|
|
}
|
|
|
|
/* Set UART baud rate */
|
|
if(cfg->baud_rate != 0ul)
|
|
{
|
|
u32Baud_Div = UART_BAUD_MODE2_DIVIDER((u32ClkTbl[u32UartClkSrcSel]) / (u32UartClkDivNum + 1ul), cfg->baud_rate);
|
|
|
|
if(u32Baud_Div > 0xFFFFul)
|
|
{
|
|
uart_base->BAUD = (UART_BAUD_MODE0 | UART_BAUD_MODE0_DIVIDER((u32ClkTbl[u32UartClkSrcSel]) / (u32UartClkDivNum + 1ul), cfg->baud_rate));
|
|
}
|
|
else
|
|
{
|
|
uart_base->BAUD = (UART_BAUD_MODE2 | u32Baud_Div);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* config nvic */
|
|
NVIC_EnableIRQ(uart_irq_channel);
|
|
|
|
/* config gpio */
|
|
usart_gpio_configure(serial);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/**
|
|
* 串口中断控制
|
|
*/
|
|
static rt_err_t usart_control(struct rt_serial_device *serial,
|
|
int cmd, void *arg)
|
|
{
|
|
rt_err_t result = RT_EOK;
|
|
rt_uint32_t flag;
|
|
|
|
// 获取串口基地址
|
|
UART_T *uart_base = ((usart_t)serial)->usart_base;
|
|
|
|
switch ((uint32_t) arg)
|
|
{
|
|
case RT_DEVICE_FLAG_INT_RX:
|
|
flag = UART_INTEN_RDAIEN_Msk | UART_INTEN_RXTOIEN_Msk | UART_INTEN_TOCNTEN_Msk;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
UART_DISABLE_INT(uart_base, flag);
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
UART_ENABLE_INT(uart_base, flag);
|
|
break;
|
|
default:
|
|
RT_ASSERT(0);
|
|
}
|
|
break;
|
|
// TODO 完善DMA接口
|
|
default:
|
|
RT_ASSERT(0)
|
|
;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* 串口发送函数
|
|
*/
|
|
static int usart_send(struct rt_serial_device *serial, char c)
|
|
{
|
|
// 获取串口基地址
|
|
UART_T *uart_base = ((usart_t)serial)->usart_base;
|
|
|
|
// 等待FIFO 发送
|
|
while(uart_base->FIFOSTS & UART_FIFOSTS_TXFULL_Msk);
|
|
|
|
// 发送字符
|
|
uart_base->DAT = c;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* 串口接收函数
|
|
*/
|
|
static int usart_receive(struct rt_serial_device *serial)
|
|
{
|
|
// 获取串口基地址
|
|
UART_T *uart_base = ((usart_t)serial)->usart_base;
|
|
|
|
// 如果FIFO 为空返回
|
|
if(uart_base->FIFOSTS & UART_FIFOSTS_RXEMPTY_Msk)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
return UART_READ(uart_base);
|
|
}
|
|
|
|
/**
|
|
* @brief 串口设备注册
|
|
* @param uart : UART设备结构体
|
|
* @param uart_base : UART外设基地址
|
|
* @param name : UART设备名
|
|
* @param tx_dma_channel : UART TX的DMA通道基地址(可选)
|
|
*/
|
|
static void rt_hw_uart_register(usart_t usart, UART_T * uart_base, char *name)
|
|
{
|
|
rt_uint32_t flag;
|
|
RT_ASSERT(usart != RT_NULL);
|
|
RT_ASSERT(uart_base != RT_NULL);
|
|
|
|
// 没有定义对应的硬件I2C
|
|
if (!(uart_base == UART0 || uart_base == UART1 || uart_base == UART2
|
|
|| uart_base == UART3 || uart_base == UART4 || uart_base == UART5))
|
|
{
|
|
RT_ASSERT(0);
|
|
}
|
|
|
|
usart->usart_base = uart_base;
|
|
usart->dev.ops = &m487_uart_ops;
|
|
usart->dev.config = m487_uart_default_config;
|
|
|
|
flag = RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX;
|
|
|
|
rt_hw_serial_register(&usart->dev, name,
|
|
flag, RT_NULL);
|
|
}
|
|
|
|
/**
|
|
* 硬件串口注册
|
|
*/
|
|
int rt_hw_uart_init(void)
|
|
{
|
|
#ifdef USEING_UART0
|
|
rt_hw_uart_register(&uart0, UART0, "uart0");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|