mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2025-02-25 01:07:05 +08:00
172 lines
5.5 KiB
Markdown
172 lines
5.5 KiB
Markdown
# SimpleMachines' Mizar32 Development Board
|
|
|
|
## Introduction
|
|
|
|
The Mizar32 is a 32-bit computer based on the AVR32 processor. It is
|
|
clocked at 66MHz and has 32MB of main memory. It supports mass storage
|
|
on SD card, a USB connector, an on-board LED, two buttons, a JTAG port
|
|
and six bus connectors.
|
|
|
|
|
|
|
|
The bus connectors let you add other stackable hardware modules such
|
|
as serial ports, ethernet, a 16x2 character LCD display and a
|
|
VGA/keyboard/mouse/audio board based on the 8-core Parallax Propeller
|
|
processor.
|
|
|
|
The Mizar32 is designed by SimpleMachines, Italy.
|
|
|
|
This board support package aims at adding RT-Thread support for the
|
|
following Mizar32 development boards.
|
|
|
|
| Model | Flash | SRAM | SDRAM |
|
|
| --------- | ----- | ---- | ---- |
|
|
| Mizar32-A | 512KB | 64KB | 32MB |
|
|
| Mizar32-B | 256KB | 64KB | 32MB |
|
|
| Mizar32-C | 128KB | 64KB | 32MB |
|
|
|
|
## Specification
|
|
|
|
- Main processor: AVR32 UC3A0 @ 66 MHz
|
|
- Internal fast SRAM: 32KB or 64KB with single-cycle access time
|
|
- On-board SDRAM: 32MB with 2-cycle access time
|
|
- Internal Flash memory: 128/256/512KB with single-cycle access time
|
|
- External Flash memory: up to 4GB on micro SD card.
|
|
- Internal operating Voltage: 3.3V with 5V input tolerant I/O
|
|
- Digital I/O Pins: 66
|
|
- Timer/Counter: 3 channel, 16-bit.
|
|
- Analog-to-Digital input pins: 8 with 10-bit resolution measuring 0-3.3v at up to 384,000 samples per second
|
|
- Stereo audio bitstream Digital-to-Analog Converter with 16 bit resolution at up to 48kHz
|
|
- Pulse Width Modulation channels (PWM): 7
|
|
- Universal Sync/Async RX/TX (USART): 2
|
|
- Serial Periperal Interface (SPI): 2
|
|
- Two-Wire Interface (TWI): 1, I2C-compatible at up to 400kbit/s
|
|
- Universal Serial Bus (USB): 1 OTG host with dedicated cable.
|
|
- Debug Port: JTAG connector
|
|
- Ethernet MAC 10/100: 1 (requires add-on hardware module)
|
|
- Oscillators: 2 (12MHz and 32768Hz)
|
|
- Buttons: Reset button, user button
|
|
- LEDs: Power LED, User LED
|
|
- Power supply: 5V USB or 7.5V-35V DC, 80mA (base board) to 222mA (with all add-on modules)
|
|
- Dimensions: 96,5mm x 63,5mm
|
|
- Weight: 42.5 grams
|
|
- Temperature range: -45 to +85°C
|
|
|
|
## Embedded Hardware Interfaces
|
|
|
|
- MicroSD
|
|
- USB
|
|
- JTAG
|
|
- Add-on bus connectors 1-6 interfaces on the Add-on Bus
|
|
- 12 General Purpose I/O pins
|
|
- 2 UARTs: one basic, one with modem control signals
|
|
- 2 SPI
|
|
- I2C interface with 2-way splitter
|
|
- 8 ADC inputs
|
|
- 3 high-resolution timers
|
|
- Ethernet
|
|
|
|
## Optional Stacked Modules
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This README is essentially a work-in-progress. I will try to further
|
|
and documentation as and when I further the device driver base for the
|
|
Mizar32 target.
|
|
|
|
If you feel like reaching out to me for questions pertaining to the
|
|
target development board, you can write to me: ramangopalan AT gmail
|
|
dot com.
|
|
|
|
## Supported compiler
|
|
|
|
This BSP is built with the AVR32 GCC that comes with the Microchip
|
|
Studio. I am using the Microchip Studio version 7.0.2594. Make sure
|
|
that avr32-gcc.exe is visible on your command line. Add the binary
|
|
directory to you PATH.
|
|
|
|
|
|
|
|
I use Git Bash (Windows) for compiling the RT-Thread system. Once you
|
|
set your path correctly, invoke Git Bash to query avr32-gcc.exe's
|
|
version. The output should look similar to this:
|
|
|
|
```bash
|
|
$ avr32-gcc.exe --version
|
|
avr32-gcc.exe (AVR_32_bit_GNU_Toolchain_3.4.2_435) 4.4.7
|
|
Copyright (C) 2010 Free Software Foundation, Inc.
|
|
This is free software; see the source for copying conditions. There is NO
|
|
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
```
|
|
|
|
If you see this, you're all set to compile RT-Thread for Mizar32.
|
|
|
|
## Program firmware
|
|
|
|
### Step 1: download the RT-Thread codebase and navigate to bsp/avr32uc3a0.
|
|
|
|
```bash
|
|
$ cd bsp/avr32uc3a0/
|
|
```
|
|
|
|
### Step 2: build
|
|
|
|
```bash
|
|
scons -c
|
|
scons
|
|
```
|
|
|
|
### Step 3: flash
|
|
|
|
If everything went well, scons should have generated an elf file:
|
|
rtthread-uc3a0256.elf. Let us program the file. The program 'atprogram'
|
|
comes with Microchip Studio. I didn't have to do much here. Just make sure
|
|
`atprogram.exe' is in your PATH.
|
|
|
|
```bash
|
|
atprogram -t atmelice -i jtag -d at32uc3a0256 program -f rtthread-uc3a0256.elf
|
|
```
|
|
|
|
Note that you should already see the on-board LED (PB29) blink if your
|
|
programming was successful. I use the Atmel ICE programmer. To access
|
|
msh with the default menuconfig's configuration, you'll need the VGA
|
|
shield. Connect the target board to a 12 VDC wall adapter. Also
|
|
connect the shield to a VGA monitor and a PS/2 keyboard.
|
|
|
|
## Running Result
|
|
|
|
The output information on serial port for `ps' the command should look like this:
|
|
|
|
```bash
|
|
0x000003c0 tidle0 31 ready 0x00000054 0x00000100 67% 0x00000009 OK
|
|
0x00001650 tshell 20 running 0x000000b4 0x00001000 13% 0x0000000a OK
|
|
0x00001350 led1 5 suspend 0x0000007c 0x00000400 12% 0x00000005 EINTRPT
|
|
```
|
|
|
|
Here is a picture of the RT-Thread session on the VGA monitor:
|
|
|
|
|
|
|
|
## Peripheral Support
|
|
|
|
| Drive | Support | Remark |
|
|
| ----- | ------- | ------- |
|
|
| UART | Support | UART0/1 |
|
|
| GPIO | Support | - |
|
|
| I2C | - | - |
|
|
| RTC | - | - |
|
|
| SPI | - | - |
|
|
| TIMER | - | - |
|
|
| WDT | - | - |
|
|
|