35 lines
1.4 KiB
Plaintext
35 lines
1.4 KiB
Plaintext
/***********************************************************************
|
|
* This file was automatically generated by RASC
|
|
*
|
|
* J-Link script file to change the device being used for a debug
|
|
* session. This is required when the RA MCU being debugged is in
|
|
* NSECSD device life-cycle state, when the normal flash driver mechanism
|
|
* cannot be used as the use of RAM on the target MCU is not permitted.
|
|
* This means an alternate, but slower, flash driver mechanism is
|
|
* required, which makes no use of target RAM. This alternate mechanism
|
|
* is enabled through the use of device names post-pended with "_RAMLess".
|
|
*
|
|
* To use normal flash driver:
|
|
* => Set _USE_RAMLESS_FLASH_DRIVER to 0.
|
|
*
|
|
* To use slower, alternate flash driver:
|
|
* => Set _USE_RAMLESS_FLASH_DRIVER to 1.
|
|
*
|
|
* Note that the "_RAMLess" device name specified in the call to
|
|
* JLINK_SetDevice() must match the actual target device.
|
|
***********************************************************************/
|
|
|
|
__constant U32 _USE_RAMLESS_FLASH_DRIVER = 0;
|
|
|
|
int ConfigTargetSettings(void) {
|
|
if (_USE_RAMLESS_FLASH_DRIVER != 0) {
|
|
|
|
JLINK_SYS_Report("J-Link script: ConfigTargetSettings()");
|
|
JLINK_SYS_Report("Setting Device for flash driver that requires no RAM");
|
|
|
|
// Ensure below device matches your target MCU (but with _RAMLess added)
|
|
JLINK_SetDevice("R7FA4M2AD_RAMLess");
|
|
}
|
|
return 0;
|
|
}
|