rt-thread-official/bsp/acm32/acm32f0x0-nucleo/libraries/HAL_Driver/Inc/HAL_GPIO.h

211 lines
8.5 KiB
C

/*
******************************************************************************
* @file HAL_GPIO.h
* @version V1.0.0
* @date 2020
* @brief Header file of GPIO HAL module.
******************************************************************************
*/
#ifndef __HAL_GPIO_H__
#define __HAL_GPIO_H__
#include "ACM32Fxx_HAL.h"
/** @defgroup GPIO_pins GPIO pins
* @{
*/
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_PIN_MASK (0x0000FFFFu) /* PIN mask for assert test */
/**
* @}
*/
/** @defgroup GPIO_mode GPIO mode
* @{
*/
#define GPIO_MODE_INPUT (0x00010000u) /*!< Input Floating Mode */
#define GPIO_MODE_OUTPUT_PP (0x00010001u) /*!< Output Push Pull Mode */
#define GPIO_MODE_OUTPUT_OD (0x00011002u) /*!< Output Open Drain Mode */
#define GPIO_MODE_AF_PP (0x00000003u) /*!< Alternate Function Push Pull Mode */
#define GPIO_MODE_AF_OD (0x00001004u) /*!< Alternate Function Open Drain Mode */
#define GPIO_MODE_ANALOG (0x00000005u) /*!< Analog Mode */
#define GPIO_MODE_IT_RISING (0x10010000u) /*!< External Interrupt Mode with Rising edge trigger detection */
#define GPIO_MODE_IT_FALLING (0x10010001u) /*!< External Interrupt Mode with Falling edge trigger detection */
#define GPIO_MODE_IT_RISING_FALLING (0x10010002u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
#define GPIO_MODE_IT_HIGH_LEVEL (0x10010003u) /*!< External Interrupt Mode with high level trigger detection */
#define GPIO_MODE_IT_LOW_LEVEL (0x10010004u) /*!< External Interrupt Mode with low level trigger detection */
#define GPIO_MODE_OD_MASK (0x00001000u) /*!< OD Mode Mask */
#define GPIO_MODE_IO_MASK (0x00010000u) /*!< Use GPIO Function Mask */
#define GPIO_MODE_IT_MASK (0x10000000u) /*!< GPIO interrupt Mask */
/**
* @}
*/
/** @defgroup GPIO_pull GPIO pull
* @{
*/
#define GPIO_NOPULL (0x00000000u) /*!< No Pull-up or Pull-down activation */
#define GPIO_PULLUP (0x00000001u) /*!< Pull-up activation */
#define GPIO_PULLDOWN (0x00000002u) /*!< Pull-down activation */
/**
* @}
*/
/** @defgroup GPIOEx_function_selection GPIO pull
* @{
*/
#define GPIO_FUNCTION_0 (0x00000000u)
#define GPIO_FUNCTION_1 (0x00000001u)
#define GPIO_FUNCTION_2 (0x00000002u)
#define GPIO_FUNCTION_3 (0x00000003u)
#define GPIO_FUNCTION_4 (0x00000004u)
#define GPIO_FUNCTION_5 (0x00000005u)
#define GPIO_FUNCTION_6 (0x00000006u)
#define GPIO_FUNCTION_7 (0x00000007u)
#define GPIO_FUNCTION_8 (0x00000008u)
#define GPIO_FUNCTION_9 (0x00000009u)
/**
* @}
*/
/** @defgroup GPIOx Index
* @{
*/
typedef enum
{
GPIOA,
GPIOB,
GPIOC,
GPIOD,
}enum_GPIOx_t;
/**
* @}
*/
/** @defgroup GPIO Bit SET and Bit RESET enumeration
* @{
*/
typedef enum
{
GPIO_PIN_CLEAR = 0u,
GPIO_PIN_SET = 1u,
}enum_PinState_t;
/**
* @}
*/
/*
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins */
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIO_mode */
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
This parameter can be a value of @ref GPIO_pull */
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
This parameter can be a value of @ref GPIOEx_function_selection */
} GPIO_InitTypeDef;
/** @defgroup GPIO Private Macros
* @{
*/
#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
((INSTANCE) == GPIOB) || \
((INSTANCE) == GPIOC) || \
((INSTANCE) == GPIOD) )
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00u) &&\
(((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u))
#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
((__MODE__) == GPIO_MODE_AF_PP) ||\
((__MODE__) == GPIO_MODE_AF_OD) ||\
((__MODE__) == GPIO_MODE_IT_RISING) ||\
((__MODE__) == GPIO_MODE_IT_FALLING) ||\
((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
((__MODE__) == GPIO_MODE_IT_HIGH_LEVEL) ||\
((__MODE__) == GPIO_MODE_IT_LOW_LEVEL) ||\
((__MODE__) == GPIO_MODE_ANALOG))
#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
((__PULL__) == GPIO_PULLUP) ||\
((__PULL__) == GPIO_PULLDOWN))
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_CLEAR) || ((ACTION) == GPIO_PIN_SET))
#define IS_GPIO_FUNCTION(__FUNCTION__) (((__FUNCTION__) == GPIO_FUNCTION_0) ||\
((__FUNCTION__) == GPIO_FUNCTION_1) ||\
((__FUNCTION__) == GPIO_FUNCTION_2) ||\
((__FUNCTION__) == GPIO_FUNCTION_3) ||\
((__FUNCTION__) == GPIO_FUNCTION_4) ||\
((__FUNCTION__) == GPIO_FUNCTION_5) ||\
((__FUNCTION__) == GPIO_FUNCTION_6) ||\
((__FUNCTION__) == GPIO_FUNCTION_7) ||\
((__FUNCTION__) == GPIO_FUNCTION_8) ||\
((__FUNCTION__) == GPIO_FUNCTION_9))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/* HAL_GPIO_IRQHandler */
void HAL_GPIO_IRQHandler(enum_GPIOx_t fe_GPIO, uint32_t fu32_GPIO_Pin);
/* HAL_GPIO_Init */
void HAL_GPIO_Init(enum_GPIOx_t fe_GPIO, GPIO_InitTypeDef *GPIO_Init);
/* HAL_GPIO_DeInit */
void HAL_GPIO_DeInit(enum_GPIOx_t fe_GPIO, uint32_t fu32_Pin);
/* HAL_GPIO_AnalogEnable */
void HAL_GPIO_AnalogEnable(enum_GPIOx_t fe_GPIO, uint32_t fu32_Pin);
/* HAL_GPIO_WritePin */
void HAL_GPIO_WritePin(enum_GPIOx_t fe_GPIO, uint32_t fu32_GPIO_Pin, enum_PinState_t fe_PinState);
/* HAL_GPIO_ReadPin */
enum_PinState_t HAL_GPIO_ReadPin(enum_GPIOx_t fe_GPIO, uint32_t fu32_GPIO_Pin);
#endif