rt-thread-official/bsp/nxp/lpc/lpc408x/Libraries/Drivers/include/lpc_emac.h

617 lines
30 KiB
C

/**********************************************************************
* $Id$ lpc_emac.h 2011-06-02
*//**
* @file lpc_emac.h
* @brief Contains all macro definitions and function prototypes
* support for Ethernet MAC firmware library on LPC
* @version 1.0
* @date 02. June. 2011
* @author NXP MCU SW Application Team
*
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors'
* relevant copyright in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
**********************************************************************/
/* Peripheral group ----------------------------------------------------------- */
/** @defgroup EMAC EMAC (Ethernet Media Access Controller)
* @ingroup LPC_CMSIS_FwLib_Drivers
* @{
*/
#ifndef __LPC_EMAC_H_
#define __LPC_EMAC_H_
#include "LPC407x_8x_177x_8x.h"
#include "lpc_types.h"
#ifdef __cplusplus
extern "C"
{
#endif
/** @defgroup EMAC_Private_Macros EMAC Private Macros
* @{
*/
/* Ethernet MAC register definitions --------------------------------------------------------------------- */
/* MAC Configuration Register 1 */
#define EMAC_MAC1_MASK 0xcf1f /*MAC1 register mask*/
#define EMAC_MAC1_REC_EN 0x00000001 /**< Receive Enable */
#define EMAC_MAC1_PASS_ALL 0x00000002 /**< Pass All Receive Frames */
#define EMAC_MAC1_RX_FLOWC 0x00000004 /**< RX Flow Control */
#define EMAC_MAC1_TX_FLOWC 0x00000008 /**< TX Flow Control */
#define EMAC_MAC1_LOOPB 0x00000010 /**< Loop Back Mode */
#define EMAC_MAC1_RES_TX 0x00000100 /**< Reset TX Logic */
#define EMAC_MAC1_RES_MCS_TX 0x00000200 /**< Reset MAC TX Control Sublayer */
#define EMAC_MAC1_RES_RX 0x00000400 /**< Reset RX Logic */
#define EMAC_MAC1_RES_MCS_RX 0x00000800 /**< Reset MAC RX Control Sublayer */
#define EMAC_MAC1_SIM_RES 0x00004000 /**< Simulation Reset */
#define EMAC_MAC1_SOFT_RES 0x00008000 /**< Soft Reset MAC */
/* MAC Configuration Register 2 */
#define EMAC_MAC2_MASK 0x73ff /*MAC2 register mask*/
#define EMAC_MAC2_FULL_DUP 0x00000001 /**< Full-Duplex Mode */
#define EMAC_MAC2_FRM_LEN_CHK 0x00000002 /**< Frame Length Checking */
#define EMAC_MAC2_HUGE_FRM_EN 0x00000004 /**< Huge Frame Enable */
#define EMAC_MAC2_DLY_CRC 0x00000008 /**< Delayed CRC Mode */
#define EMAC_MAC2_CRC_EN 0x00000010 /**< Append CRC to every Frame */
#define EMAC_MAC2_PAD_EN 0x00000020 /**< Pad all Short Frames */
#define EMAC_MAC2_VLAN_PAD_EN 0x00000040 /**< VLAN Pad Enable */
#define EMAC_MAC2_ADET_PAD_EN 0x00000080 /**< Auto Detect Pad Enable */
#define EMAC_MAC2_PPREAM_ENF 0x00000100 /**< Pure Preamble Enforcement */
#define EMAC_MAC2_LPREAM_ENF 0x00000200 /**< Long Preamble Enforcement */
#define EMAC_MAC2_NO_BACKOFF 0x00001000 /**< No Backoff Algorithm */
#define EMAC_MAC2_BACK_PRESSURE 0x00002000 /**< Backoff Presurre / No Backoff */
#define EMAC_MAC2_EXCESS_DEF 0x00004000 /**< Excess Defer */
/* Back-to-Back Inter-Packet-Gap Register */
/** Programmable field representing the nibble time offset of the minimum possible period
* between the end of any transmitted packet to the beginning of the next */
#define EMAC_IPGT_BBIPG(n) (n&0x7F)
/** Recommended value for Full Duplex of Programmable field representing the nibble time
* offset of the minimum possible period between the end of any transmitted packet to the
* beginning of the next */
#define EMAC_IPGT_FULL_DUP (EMAC_IPGT_BBIPG(0x15))
/** Recommended value for Half Duplex of Programmable field representing the nibble time
* offset of the minimum possible period between the end of any transmitted packet to the
* beginning of the next */
#define EMAC_IPGT_HALF_DUP (EMAC_IPGT_BBIPG(0x12))
/* Non Back-to-Back Inter-Packet-Gap Register */
/** Programmable field representing the Non-Back-to-Back Inter-Packet-Gap */
#define EMAC_IPGR_NBBIPG_P2(n) (n&0x7F)
/** Recommended value for Programmable field representing the Non-Back-to-Back Inter-Packet-Gap Part 1 */
#define EMAC_IPGR_P2_DEF (EMAC_IPGR_NBBIPG_P2(0x12))
/** Programmable field representing the optional carrierSense window referenced in
* IEEE 802.3/4.2.3.2.1 'Carrier Deference' */
#define EMAC_IPGR_NBBIPG_P1(n) ((n&0x7F)<<8)
/** Recommended value for Programmable field representing the Non-Back-to-Back Inter-Packet-Gap Part 2 */
#define EMAC_IPGR_P1_DEF EMAC_IPGR_NBBIPG_P1(0x0C)
/* Collision Window/Retry Register */
/** Programmable field specifying the number of retransmission attempts following a collision before
* aborting the packet due to excessive collisions */
#define EMAC_CLRT_MAX_RETX(n) (n&0x0F)
/** Programmable field representing the slot time or collision window during which collisions occur
* in properly configured networks */
#define EMAC_CLRT_COLL(n) ((n&0x3F)<<8)
/** Default value for Collision Window / Retry register */
#define EMAC_CLRT_DEF ((EMAC_CLRT_MAX_RETX(0x0F))|(EMAC_CLRT_COLL(0x37)))
/* Maximum Frame Register */
/** Represents a maximum receive frame of 1536 octets */
#define EMAC_MAXF_MAXFRMLEN(n) (n&0xFFFF)
#define EMAC_MAXF_MAXFRMLEN_DEF (0x6000)
/* PHY Support Register */
#define EMAC_SUPP_SPEED 0x00000100 /**< Reduced MII Logic Current Speed */
//#define EMAC_SUPP_RES_RMII 0x00000800 /**< Reset Reduced MII Logic */
/* Test Register */
#define EMAC_TEST_SHCUT_PQUANTA 0x00000001 /**< Shortcut Pause Quanta */
#define EMAC_TEST_TST_PAUSE 0x00000002 /**< Test Pause */
#define EMAC_TEST_TST_BACKP 0x00000004 /**< Test Back Pressure */
/* MII Management Configuration Register */
#define EMAC_MCFG_SCAN_INC 0x00000001 /**< Scan Increment PHY Address */
#define EMAC_MCFG_SUPP_PREAM 0x00000002 /**< Suppress Preamble */
#define EMAC_MCFG_CLK_SEL(n) ((n&0x0F)<<2) /**< Clock Select Field */
#define EMAC_MCFG_RES_MII 0x00008000 /**< Reset MII Management Hardware */
#define EMAC_MCFG_MII_MAXCLK 2500000UL /**< MII Clock max */
/* MII Management Command Register */
#define EMAC_MCMD_READ 0x00000001 /**< MII Read */
#define EMAC_MCMD_SCAN 0x00000002 /**< MII Scan continuously */
#define EMAC_MII_WR_TOUT 0x00050000 /**< MII Write timeout count */
#define EMAC_MII_RD_TOUT 0x00050000 /**< MII Read timeout count */
/* MII Management Address Register */
#define EMAC_MADR_REG_ADR(n) (n&0x1F) /**< MII Register Address field */
#define EMAC_MADR_PHY_ADR(n) ((n&0x1F)<<8) /**< PHY Address Field */
/* MII Management Write Data Register */
#define EMAC_MWTD_DATA(n) (n&0xFFFF) /**< Data field for MMI Management Write Data register */
/* MII Management Read Data Register */
#define EMAC_MRDD_DATA(n) (n&0xFFFF) /**< Data field for MMI Management Read Data register */
/* MII Management Indicators Register */
#define EMAC_MIND_BUSY 0x00000001 /**< MII is Busy */
#define EMAC_MIND_SCAN 0x00000002 /**< MII Scanning in Progress */
#define EMAC_MIND_NOT_VAL 0x00000004 /**< MII Read Data not valid */
#define EMAC_MIND_MII_LINK_FAIL 0x00000008 /**< MII Link Failed */
/* Station Address 0 Register */
/* Station Address 1 Register */
/* Station Address 2 Register */
/* Control register definitions --------------------------------------------------------------------------- */
/* Command Register */
#define EMAC_CR_RX_EN 0x00000001 /**< Enable Receive */
#define EMAC_CR_TX_EN 0x00000002 /**< Enable Transmit */
#define EMAC_CR_REG_RES 0x00000008 /**< Reset Host Registers */
#define EMAC_CR_TX_RES 0x00000010 /**< Reset Transmit Datapath */
#define EMAC_CR_RX_RES 0x00000020 /**< Reset Receive Datapath */
#define EMAC_CR_PASS_RUNT_FRM 0x00000040 /**< Pass Runt Frames */
#define EMAC_CR_PASS_RX_FILT 0x00000080 /**< Pass RX Filter */
#define EMAC_CR_TX_FLOW_CTRL 0x00000100 /**< TX Flow Control */
#define EMAC_CR_RMII 0x00000200 /**< Reduced MII Interface */
#define EMAC_CR_FULL_DUP 0x00000400 /**< Full Duplex */
/* Status Register */
#define EMAC_SR_RX_EN 0x00000001 /**< Enable Receive */
#define EMAC_SR_TX_EN 0x00000002 /**< Enable Transmit */
/* Receive Descriptor Base Address Register */
//
/* Receive Status Base Address Register */
//
/* Receive Number of Descriptors Register */
//
/* Receive Produce Index Register */
//
/* Receive Consume Index Register */
//
/* Transmit Descriptor Base Address Register */
//
/* Transmit Status Base Address Register */
//
/* Transmit Number of Descriptors Register */
//
/* Transmit Produce Index Register */
//
/* Transmit Consume Index Register */
//
/* Transmit Status Vector 0 Register */
#define EMAC_TSV0_CRC_ERR 0x00000001 /**< CRC error */
#define EMAC_TSV0_LEN_CHKERR 0x00000002 /**< Length Check Error */
#define EMAC_TSV0_LEN_OUTRNG 0x00000004 /**< Length Out of Range */
#define EMAC_TSV0_DONE 0x00000008 /**< Tramsmission Completed */
#define EMAC_TSV0_MCAST 0x00000010 /**< Multicast Destination */
#define EMAC_TSV0_BCAST 0x00000020 /**< Broadcast Destination */
#define EMAC_TSV0_PKT_DEFER 0x00000040 /**< Packet Deferred */
#define EMAC_TSV0_EXC_DEFER 0x00000080 /**< Excessive Packet Deferral */
#define EMAC_TSV0_EXC_COLL 0x00000100 /**< Excessive Collision */
#define EMAC_TSV0_LATE_COLL 0x00000200 /**< Late Collision Occured */
#define EMAC_TSV0_GIANT 0x00000400 /**< Giant Frame */
#define EMAC_TSV0_UNDERRUN 0x00000800 /**< Buffer Underrun */
#define EMAC_TSV0_BYTES 0x0FFFF000 /**< Total Bytes Transferred */
#define EMAC_TSV0_CTRL_FRAME 0x10000000 /**< Control Frame */
#define EMAC_TSV0_PAUSE 0x20000000 /**< Pause Frame */
#define EMAC_TSV0_BACK_PRESS 0x40000000 /**< Backpressure Method Applied */
#define EMAC_TSV0_VLAN 0x80000000 /**< VLAN Frame */
/* Transmit Status Vector 1 Register */
#define EMAC_TSV1_BYTE_CNT 0x0000FFFF /**< Transmit Byte Count */
#define EMAC_TSV1_COLL_CNT 0x000F0000 /**< Transmit Collision Count */
/* Receive Status Vector Register */
#define EMAC_RSV_BYTE_CNT 0x0000FFFF /**< Receive Byte Count */
#define EMAC_RSV_PKT_IGNORED 0x00010000 /**< Packet Previously Ignored */
#define EMAC_RSV_RXDV_SEEN 0x00020000 /**< RXDV Event Previously Seen */
#define EMAC_RSV_CARR_SEEN 0x00040000 /**< Carrier Event Previously Seen */
#define EMAC_RSV_REC_CODEV 0x00080000 /**< Receive Code Violation */
#define EMAC_RSV_CRC_ERR 0x00100000 /**< CRC Error */
#define EMAC_RSV_LEN_CHKERR 0x00200000 /**< Length Check Error */
#define EMAC_RSV_LEN_OUTRNG 0x00400000 /**< Length Out of Range */
#define EMAC_RSV_REC_OK 0x00800000 /**< Frame Received OK */
#define EMAC_RSV_MCAST 0x01000000 /**< Multicast Frame */
#define EMAC_RSV_BCAST 0x02000000 /**< Broadcast Frame */
#define EMAC_RSV_DRIB_NIBB 0x04000000 /**< Dribble Nibble */
#define EMAC_RSV_CTRL_FRAME 0x08000000 /**< Control Frame */
#define EMAC_RSV_PAUSE 0x10000000 /**< Pause Frame */
#define EMAC_RSV_UNSUPP_OPC 0x20000000 /**< Unsupported Opcode */
#define EMAC_RSV_VLAN 0x40000000 /**< VLAN Frame */
/* Flow Control Counter Register */
#define EMAC_FCC_MIRR_CNT(n) (n&0xFFFF) /**< Mirror Counter */
#define EMAC_FCC_PAUSE_TIM(n) ((n&0xFFFF)<<16) /**< Pause Timer */
/* Flow Control Status Register */
#define EMAC_FCS_MIRR_CNT(n) (n&0xFFFF) /**< Mirror Counter Current */
/* Receive filter register definitions -------------------------------------------------------- */
/* Receive Filter Control Register */
#define EMAC_RFC_UCAST_EN 0x00000001 /**< Accept Unicast Frames Enable */
#define EMAC_RFC_BCAST_EN 0x00000002 /**< Accept Broadcast Frames Enable */
#define EMAC_RFC_MCAST_EN 0x00000004 /**< Accept Multicast Frames Enable */
#define EMAC_RFC_UCAST_HASH_EN 0x00000008 /**< Accept Unicast Hash Filter Frames */
#define EMAC_RFC_MCAST_HASH_EN 0x00000010 /**< Accept Multicast Hash Filter Fram.*/
#define EMAC_RFC_PERFECT_EN 0x00000020 /**< Accept Perfect Match Enable */
#define EMAC_RFC_MAGP_WOL_EN 0x00001000 /**< Magic Packet Filter WoL Enable */
#define EMAC_RFC_PFILT_WOL_EN 0x00002000 /**< Perfect Filter WoL Enable */
/* Receive Filter WoL Status/Clear Registers */
#define EMAC_WOL_UCAST 0x00000001 /**< Unicast Frame caused WoL */
#define EMAC_WOL_BCAST 0x00000002 /**< Broadcast Frame caused WoL */
#define EMAC_WOL_MCAST 0x00000004 /**< Multicast Frame caused WoL */
#define EMAC_WOL_UCAST_HASH 0x00000008 /**< Unicast Hash Filter Frame WoL */
#define EMAC_WOL_MCAST_HASH 0x00000010 /**< Multicast Hash Filter Frame WoL */
#define EMAC_WOL_PERFECT 0x00000020 /**< Perfect Filter WoL */
#define EMAC_WOL_RX_FILTER 0x00000080 /**< RX Filter caused WoL */
#define EMAC_WOL_MAG_PACKET 0x00000100 /**< Magic Packet Filter caused WoL */
#define EMAC_WOL_BITMASK 0x01BF /**< Receive Filter WoL Status/Clear bitmasl value */
/* Hash Filter Table LSBs Register */
//
/* Hash Filter Table MSBs Register */
//
/* Module control register definitions ---------------------------------------------------- */
/* Interrupt Status/Enable/Clear/Set Registers */
#define EMAC_INT_RX_OVERRUN 0x00000001 /**< Overrun Error in RX Queue */
#define EMAC_INT_RX_ERR 0x00000002 /**< Receive Error */
#define EMAC_INT_RX_FIN 0x00000004 /**< RX Finished Process Descriptors */
#define EMAC_INT_RX_DONE 0x00000008 /**< Receive Done */
#define EMAC_INT_TX_UNDERRUN 0x00000010 /**< Transmit Underrun */
#define EMAC_INT_TX_ERR 0x00000020 /**< Transmit Error */
#define EMAC_INT_TX_FIN 0x00000040 /**< TX Finished Process Descriptors */
#define EMAC_INT_TX_DONE 0x00000080 /**< Transmit Done */
#define EMAC_INT_SOFT_INT 0x00001000 /**< Software Triggered Interrupt */
#define EMAC_INT_WAKEUP 0x00002000 /**< Wakeup Event Interrupt */
/* Power Down Register */
#define EMAC_PD_POWER_DOWN 0x80000000 /**< Power Down MAC */
/* Descriptor and status formats ------------------------------------------------------ */
/* RX and TX descriptor and status definitions. */
/* EMAC Memory Buffer configuration for 16K Ethernet RAM */
#define EMAC_NUM_RX_FRAG 4 /**< Num.of RX Fragments 4*1536= 6.0kB */
#define EMAC_NUM_TX_FRAG 3 /**< Num.of TX Fragments 3*1536= 4.6kB */
#define EMAC_ETH_MAX_FLEN 1536 /**< Max. Ethernet Frame Size */
#define EMAC_TX_FRAME_TOUT 0x00100000 /**< Frame Transmit timeout count */
/* EMAC variables located in 16K Ethernet SRAM */
#define RX_DESC_BASE LPC_PERI_RAM_BASE
#define RX_STAT_BASE (RX_DESC_BASE + EMAC_NUM_RX_FRAG*8)
#define TX_DESC_BASE (RX_STAT_BASE + EMAC_NUM_RX_FRAG*8)
#define TX_STAT_BASE (TX_DESC_BASE + EMAC_NUM_TX_FRAG*8)
#define RX_BUF_BASE (TX_STAT_BASE + EMAC_NUM_TX_FRAG*4)
#define TX_BUF_BASE (RX_BUF_BASE + EMAC_NUM_RX_FRAG*EMAC_ETH_MAX_FLEN)
/**
* @brief RX Descriptor structure type definition
*/
#define RX_DESC_PACKET(i) (*(uint32_t *)(RX_DESC_BASE + 8*i))
#define RX_DESC_CTRL(i) (*(uint32_t *)(RX_DESC_BASE+4 + 8*i))
/**
* @brief RX Status structure type definition
*/
#define RX_STAT_INFO(i) (*(uint32_t *)(RX_STAT_BASE + 8*i))
#define RX_STAT_HASHCRC(i) (*(uint32_t *)(RX_STAT_BASE+4 + 8*i))
/**
* @brief TX Descriptor structure type definition
*/
#define TX_DESC_PACKET(i) (*(uint32_t *)(TX_DESC_BASE + 8*i))
#define TX_DESC_CTRL(i) (*(uint32_t *)(TX_DESC_BASE+4 + 8*i))
/**
* @brief TX Status structure type definition
*/
#define TX_STAT_INFO(i) (*(uint32_t *)(TX_STAT_BASE + 4*i))
/**
* @brief TX Data Buffer structure definition
*/
#define RX_BUF(i) (RX_BUF_BASE + EMAC_ETH_MAX_FLEN*i)
#define TX_BUF(i) (TX_BUF_BASE + EMAC_ETH_MAX_FLEN*i)
/* RX Descriptor Control Word */
#define EMAC_RCTRL_SIZE(n) (n&0x7FF) /**< Buffer size field */
#define EMAC_RCTRL_INT 0x80000000 /**< Generate RxDone Interrupt */
/* RX Status Hash CRC Word */
#define EMAC_RHASH_SA 0x000001FF /**< Hash CRC for Source Address */
#define EMAC_RHASH_DA 0x001FF000 /**< Hash CRC for Destination Address */
/* RX Status Information Word */
#define EMAC_RINFO_SIZE 0x000007FF /**< Data size in bytes */
#define EMAC_RINFO_CTRL_FRAME 0x00040000 /**< Control Frame */
#define EMAC_RINFO_VLAN 0x00080000 /**< VLAN Frame */
#define EMAC_RINFO_FAIL_FILT 0x00100000 /**< RX Filter Failed */
#define EMAC_RINFO_MCAST 0x00200000 /**< Multicast Frame */
#define EMAC_RINFO_BCAST 0x00400000 /**< Broadcast Frame */
#define EMAC_RINFO_CRC_ERR 0x00800000 /**< CRC Error in Frame */
#define EMAC_RINFO_SYM_ERR 0x01000000 /**< Symbol Error from PHY */
#define EMAC_RINFO_LEN_ERR 0x02000000 /**< Length Error */
#define EMAC_RINFO_RANGE_ERR 0x04000000 /**< Range Error (exceeded max. size) */
#define EMAC_RINFO_ALIGN_ERR 0x08000000 /**< Alignment Error */
#define EMAC_RINFO_OVERRUN 0x10000000 /**< Receive overrun */
#define EMAC_RINFO_NO_DESCR 0x20000000 /**< No new Descriptor available */
#define EMAC_RINFO_LAST_FLAG 0x40000000 /**< Last Fragment in Frame */
#define EMAC_RINFO_ERR 0x80000000 /**< Error Occured (OR of all errors) */
/** RX Status Information word mask */
#define EMAC_RINFO_ERR_MASK (EMAC_RINFO_FAIL_FILT | EMAC_RINFO_CRC_ERR | EMAC_RINFO_SYM_ERR | \
EMAC_RINFO_LEN_ERR | EMAC_RINFO_ALIGN_ERR | EMAC_RINFO_OVERRUN)
/* TX Descriptor Control Word */
#define EMAC_TCTRL_SIZE 0x000007FF /**< Size of data buffer in bytes */
#define EMAC_TCTRL_OVERRIDE 0x04000000 /**< Override Default MAC Registers */
#define EMAC_TCTRL_HUGE 0x08000000 /**< Enable Huge Frame */
#define EMAC_TCTRL_PAD 0x10000000 /**< Pad short Frames to 64 bytes */
#define EMAC_TCTRL_CRC 0x20000000 /**< Append a hardware CRC to Frame */
#define EMAC_TCTRL_LAST 0x40000000 /**< Last Descriptor for TX Frame */
#define EMAC_TCTRL_INT 0x80000000 /**< Generate TxDone Interrupt */
/* TX Status Information Word */
#define EMAC_TINFO_COL_CNT 0x01E00000 /**< Collision Count */
#define EMAC_TINFO_DEFER 0x02000000 /**< Packet Deferred (not an error) */
#define EMAC_TINFO_EXCESS_DEF 0x04000000 /**< Excessive Deferral */
#define EMAC_TINFO_EXCESS_COL 0x08000000 /**< Excessive Collision */
#define EMAC_TINFO_LATE_COL 0x10000000 /**< Late Collision Occured */
#define EMAC_TINFO_UNDERRUN 0x20000000 /**< Transmit Underrun */
#define EMAC_TINFO_NO_DESCR 0x40000000 /**< No new Descriptor available */
#define EMAC_TINFO_ERR 0x80000000 /**< Error Occured (OR of all errors) */
/* DP83848C PHY definition ------------------------------------------------------------ */
/** PHY device reset time out definition */
#define EMAC_PHY_RESP_TOUT 0x100000UL
/* ENET Device Revision ID */
#define EMAC_OLD_EMAC_MODULE_ID 0x39022000 /**< Rev. ID for first rev '-' */
/* PHY Basic Mode Control Register (BMCR) bitmap definitions */
#define EMAC_PHY_BMCR_LOOPBACK (1<<14) /**< Loop back */
//#define EMAC_PHY_BMCR_AN (1<<12) /**< Auto Negotiation */
#define EMAC_PHY_BMCR_ISOLATE (1<<10) /**< Isolate */
#define EMAC_PHY_BMCR_RE_AN (1<<9) /**< Restart auto negotiation */
#define EMAC_PHY_BMSR_NOPREAM (1<<6) /**< MF Preamable Supress */
#define EMAC_PHY_BMSR_AUTO_DONE (1<<5) /**< Auto negotiation complete */
#define EMAC_PHY_FULLD_100M (EMAC_PHY_BMCR_SPEED_SEL | EMAC_PHY_BMCR_DUPLEX) // Full Duplex 100Mbit
#define EMAC_PHY_HALFD_100M (EMAC_PHY_BMCR_SPEED_SEL | (~ EMAC_PHY_BMCR_DUPLEX)) // Half Duplex 100Mbit
#define EMAC_PHY_FULLD_10M ((~ EMAC_PHY_BMCR_SPEED_SEL) | EMAC_PHY_BMCR_DUPLEX) // Full Duplex 10Mbit
#define EMAC_PHY_HALFD_10M ((~ EMAC_PHY_BMCR_SPEED_SEL) | (~EMAC_PHY_BMCR_DUPLEX)) // Half Duplex 10MBit
#define EMAC_PHY_AUTO_NEG (EMAC_PHY_BMCR_SPEED_SEL | EMAC_PHY_BMCR_AN) // Select Auto Negotiation
/* EMAC PHY status type definitions */
#define EMAC_PHY_STAT_LINK (0) /**< Link Status */
#define EMAC_PHY_STAT_SPEED (1) /**< Speed Status */
#define EMAC_PHY_STAT_DUP (2) /**< Duplex Status */
/* EMAC PHY device Speed definitions */
#define EMAC_MODE_AUTO (0) /**< Auto-negotiation mode */
#define EMAC_MODE_10M_FULL (1) /**< 10Mbps FullDuplex mode */
#define EMAC_MODE_10M_HALF (2) /**< 10Mbps HalfDuplex mode */
#define EMAC_MODE_100M_FULL (3) /**< 100Mbps FullDuplex mode */
#define EMAC_MODE_100M_HALF (4) /**< 100Mbps HalfDuplex mode */
/* EMAC User Buffers*/
#define EMAC_MAX_FRAME_SIZE (0x600) /* 1536 */
#define EMAC_MAX_FRAME_NUM (2)
/* EMAC Error Codes */
#define EMAC_ALIGN_ERR ( 1 << 0)
#define EMAC_RANGE_ERR ( 1 << 1)
#define EMAC_LENGTH_ERR ( 1 << 2)
#define EMAC_SYMBOL_ERR ( 1 << 3)
#define EMAC_CRC_ERR ( 1 << 4)
#define EMAC_RX_NO_DESC_ERR ( 1 << 5)
#define EMAC_OVERRUN_ERR ( 1 << 6)
#define EMAC_LATE_COLLISION_ERR ( 1 << 7)
#define EMAC_EXCESSIVE_COLLISION_ERR ( 1 << 8)
#define EMAC_EXCESSIVE_DEFER_ERR ( 1 << 9)
#define EMAC_UNDERRUN_ERR ( 1 << 10)
#define EMAC_TX_NO_DESC_ERR ( 1 << 11)
#define EMAC_FILTER_FAILED_ERR ( 1 << 12)
/**
* @}
*/
/**************************** GLOBAL/PUBLIC TYPES ***************************/
/** @defgroup EMAC_Public_Types EMAC Public Types
* @{
*/
/**
* @brief TX Data Buffer structure definition
*/
typedef struct {
uint32_t ulDataLen; /**< Data length */
uint32_t *pbDataBuf; /**< A word-align data pointer to data buffer */
} EMAC_PACKETBUF_Type;
/**
* @brief PHY Configuration structure definition
*/
typedef struct {
uint32_t Mode; /**< Supported EMAC PHY device speed, should be one of the following:
- EMAC_MODE_AUTO
- EMAC_MODE_10M_FULL
- EMAC_MODE_10M_HALF
- EMAC_MODE_100M_FULL
- EMAC_MODE_100M_HALF
*/
} EMAC_PHY_CFG_Type;
/** EMAC Call back function type definition */
typedef int32_t (PHY_INIT_FUNC)(EMAC_PHY_CFG_Type* pPhyCfg);
typedef int32_t (PHY_RESET_FUNC)(void);
typedef void (EMAC_FRAME_RECV_FUNC)(uint16_t* pData, uint32_t size);
typedef void (EMAC_TRANSMIT_FINISH_FUNC)(void);
typedef void (EMAC_ERR_RECV_FUNC)(int32_t ulErrCode);
typedef void (EMAC_WAKEUP_FUNC)(void);
typedef void (SOFT_INT_FUNC)(void);
/**
* @brief EMAC configuration structure definition
*/
typedef struct {
EMAC_PHY_CFG_Type PhyCfg; /* PHY Configuration */
uint8_t bPhyAddr; /* 5-bit PHY Address field */
uint8_t *pbEMAC_Addr; /**< Pointer to EMAC Station address that contains 6-bytes
of MAC address, it must be sorted in order (bEMAC_Addr[0]..[5])
*/
uint16_t nMaxFrameSize; /* maximum frame length */
PHY_INIT_FUNC *pfnPHYInit; /* point to the funtion which will be called to initialize PHY */
PHY_RESET_FUNC *pfnPHYReset; /* point to the function which will be called to reset PHY */
EMAC_FRAME_RECV_FUNC *pfnFrameReceive; /* point to the function which will be called when a frame is received*/
EMAC_TRANSMIT_FINISH_FUNC* pfnTransmitFinish; /*point to the function which will be called when transmit finished*/
EMAC_ERR_RECV_FUNC *pfnErrorReceive; /* point to an array of functions which will be called error occur. */
/* Errors:
EMAC_ALIGN_ERR
EMAC_RANGE_ERR
EMAC_LENGTH_ERR
EMAC_SYMBOL_ERR
EMAC_CRC_ERR
EMAC_RX_NO_DESC_ERR
EMAC_OVERRUN_ERR
EMAC_LATE_COLLISION_ERR
EMAC_EXCESSIVE_COLLISION_ERR
EMAC_EXCESSIVE_DEFER_ERR
EMAC_UNDERRUN_ERR
EMAC_TX_NO_DESC_ERR
*/
EMAC_WAKEUP_FUNC *pfnWakeup; /* point to the function which will be called when receiving wakeup interrupt */
SOFT_INT_FUNC *pfnSoftInt; /* point to the function which will be called when the interrupt caused by software occurs */
} EMAC_CFG_Type;
/**
* @brief EMAC Buffer status definition
*/
typedef enum {
EMAC_BUFF_EMPTY, /* buffer is empty */
EMAC_BUFF_PARTIAL_FULL, /* buffer contains some packets */
EMAC_BUFF_FULL, /* buffer is full */
} EMAC_BUFF_STATUS;
/**
* @brief EMAC Buffer Index definition
*/
typedef enum {
EMAC_TX_BUFF, /* transmit buffer */
EMAC_RX_BUFF, /* receive buffer */
} EMAC_BUFF_IDX;
/**
* @}
*/
/** @defgroup EMAC_Public_Functions EMAC Public Functions
* @{
*/
/** Init/DeInit */
int32_t EMAC_Init(EMAC_CFG_Type *EMAC_ConfigStruct);
void EMAC_DeInit(void);
/** Send/Receive data */
void EMAC_TxEnable( void );
void EMAC_RxEnable( void );
void EMAC_SetHashFilter(uint8_t dstMAC_addr[], FunctionalState NewState);
int32_t EMAC_CRCCalc(uint8_t frame_no_fcs[], int32_t frame_len);
void EMAC_WritePacketBuffer(EMAC_PACKETBUF_Type *pDataStruct);
/** PHY Setup */
void EMAC_Write_PHY (uint8_t PhyReg, uint16_t Value);
uint16_t EMAC_Read_PHY (uint8_t PhyReg);
void EMAC_SetFullDuplexMode(uint8_t full_duplex);
void EMAC_SetPHYSpeed(uint8_t mode_100Mbps);
/** Filter */
void EMAC_SetFilterMode(uint32_t ulFilterMode, FunctionalState NewState);
FlagStatus EMAC_GetWoLStatus(uint32_t ulWoLMode);
void EMAC_IntCmd(uint32_t ulIntType, FunctionalState NewState);
IntStatus EMAC_IntGetStatus(uint32_t ulIntType);
EMAC_BUFF_STATUS EMAC_GetBufferSts(EMAC_BUFF_IDX idx);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __LPC_EMAC_DRIVER_H_ */
/**
* @}
*/