libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/mm32f327x/Libraries/MM32F327x/Source/system_mm32f327x.c

867 lines
25 KiB
C
Raw Blame History

////////////////////////////////////////////////////////////////////////////////
/// @file SYSTEM_MM32.C
/// @author AE TEAM
/// @brief THIS FILE PROVIDES ALL THE SYSTEM FUNCTIONS.
////////////////////////////////////////////////////////////////////////////////
/// @attention
///
/// THE EXISTING FIRMWARE IS ONLY FOR REFERENCE, WHICH IS DESIGNED TO PROVIDE
/// CUSTOMERS WITH CODING INFORMATION ABOUT THEIR PRODUCTS SO THEY CAN SAVE
/// TIME. THEREFORE, MINDMOTION SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT OR
/// CONSEQUENTIAL DAMAGES ABOUT ANY CLAIMS ARISING OUT OF THE CONTENT OF SUCH
/// HARDWARE AND/OR THE USE OF THE CODING INFORMATION CONTAINED HEREIN IN
/// CONNECTION WITH PRODUCTS MADE BY CUSTOMERS.
///
/// <H2><CENTER>&COPY; COPYRIGHT MINDMOTION </CENTER></H2>
////////////////////////////////////////////////////////////////////////////////
// Define to prevent recursive inclusion
#define _SYSTEM_MM32_C_
// Files includes
/// @addtogroup CMSIS
/// @{
#include "mm32_device.h"
/// @}
/// @}
/// Uncomment the line corresponding to the desired System clock (SYSCLK)
/// frequency (after reset the HSI is used as SYSCLK source)
///
/// IMPORTANT NOTE:
/// ==============
/// 1. After each device reset the HSI is used as System clock source.
///
/// 2. Please make sure that the selected System clock doesn't exceed your device's
/// maximum frequency.
///
/// 3. If none of the define below is enabled, the HSI is used as System clock
/// source.
///
/// 4. The System clock configuration functions provided within this file assume that:
/// - For Low, Medium and High density Value line devices an external 8MHz
/// crystal is used to drive the System clock.
/// - For Low, Medium and High density devices an external 8MHz crystal is
/// used to drive the System clock.
/// - For Connectivity line devices an external 25MHz crystal is used to drive
/// the System clock.
/// If you are using different crystal you have to adapt those functions accordingly.
//#define SYSCLK_FREQ_HSE HSE_VALUE //HSE_VALUE is define in reg_common.h
//#define SYSCLK_FREQ_24MHz (HSE_VALUE*3) //24000000 based HSE_VALUE = 8000000
//#define SYSCLK_FREQ_36MHz (HSE_VALUE*9/2) //36000000 based HSE_VALUE = 8000000
//#define SYSCLK_FREQ_48MHz (HSE_VALUE*6) //48000000 based HSE_VALUE = 8000000
//#define SYSCLK_FREQ_XXMHz (HSE_VALUE*6) //48000000 based HSE_VALUE = 8000000
//#define SYSCLK_FREQ_XXMHz (HSE_VALUE*9) //72000000 based HSE_VALUE = 8000000
//#define SYSCLK_FREQ_XXMHz (HSE_VALUE*12) //96000000 based HSE_VALUE = 8000000
#define SYSCLK_FREQ_XXMHz (HSE_VALUE*15) //120000000 based HSE_VALUE = 8000000
#if defined(SYSCLK_FREQ_HSE) || defined(SYSCLK_FREQ_24MHz) || defined(SYSCLK_FREQ_36MHz) || defined(SYSCLK_FREQ_48MHz) || defined(SYSCLK_FREQ_XXMHz)
#if defined(HSE_VALUE) && (!(HSE_VALUE == 8000000))
#warning redefine HSE_VALUE in reg_common.h Line 48 and ignore this warning
#endif
#endif
//#define SYSCLK_HSI_24MHz 24000000
//#define SYSCLK_HSI_36MHz 36000000
//#define SYSCLK_HSI_48MHz 48000000
//#define SYSCLK_HSI_XXMHz 48000000
//#define SYSCLK_HSI_XXMHz 72000000
//#define SYSCLK_HSI_XXMHz 96000000
#define SYSCLK_HSI_XXMHz 120000000
/// Uncomment the following line if you need to relocate your vector Table in
/// Internal SRAM.
///#define VECT_TAB_SRAM
#define VECT_TAB_OFFSET 0x0
/// Vector Table base offset field.
/// This value must be a multiple of 0x200.
/// @}
///////////////////////////////////////////////////////////////
///Clock Definitions
///////////////////////////////////////////////////////////////
#if defined SYSCLK_FREQ_HSE
u32 SystemCoreClock = SYSCLK_FREQ_HSE;
#elif defined SYSCLK_FREQ_24MHz
u32 SystemCoreClock = SYSCLK_FREQ_24MHz;
#elif defined SYSCLK_FREQ_36MHz
u32 SystemCoreClock = SYSCLK_FREQ_36MHz;
#elif defined SYSCLK_FREQ_48MHz
u32 SystemCoreClock = SYSCLK_FREQ_48MHz;
#elif defined SYSCLK_FREQ_XXMHz
u32 SystemCoreClock = SYSCLK_FREQ_XXMHz;
#elif defined SYSCLK_HSI_24MHz
u32 SystemCoreClock = SYSCLK_HSI_24MHz;
#elif defined SYSCLK_HSI_36MHz
u32 SystemCoreClock = SYSCLK_HSI_36MHz;
#elif defined SYSCLK_HSI_48MHz
u32 SystemCoreClock = SYSCLK_HSI_48MHz;
#elif defined SYSCLK_HSI_XXMHz
u32 SystemCoreClock = SYSCLK_HSI_XXMHz;
#else //HSI Selected as System Clock source
u32 SystemCoreClock = HSI_VALUE;
#endif
__I u8 AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
/// @}
static void SetSysClock(void);
#if defined SYSCLK_FREQ_HSE
static void SetSysClockToHSE(void);
#elif defined SYSCLK_FREQ_24MHz
static void SetSysClockTo24(void);
#elif defined SYSCLK_FREQ_36MHz
static void SetSysClockTo36(void);
#elif defined SYSCLK_FREQ_48MHz
static void SetSysClockTo48(void);
#elif defined SYSCLK_FREQ_XXMHz
static void SetSysClockToXX(void);
#elif defined SYSCLK_HSI_24MHz
static void SetSysClockTo24_HSI(void);
#elif defined SYSCLK_HSI_36MHz
static void SetSysClockTo36_HSI(void);
#elif defined SYSCLK_HSI_48MHz
static void SetSysClockTo48_HSI(void);
#elif defined SYSCLK_HSI_XXMHz
static void SetSysClockToXX_HSI(void);
#endif
#ifdef DATA_IN_ExtSRAM
static void SystemInit_ExtMemCtl(void);
#endif //DATA_IN_ExtSRAM
/// @}
/// @brief Setup the microcontroller system
/// Initialize the Embedded Flash Interface, the PLL and update the
/// SystemCoreClock variable.
/// @note This function should be used only after reset.
/// @param None
/// @retval None
void SystemInit (void)
{
//Reset the RCC clock configuration to the default reset state(for debug purpose)
//Set HSION bit
RCC->CR |= (u32)0x00000001;
//Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits
RCC->CFGR &= (u32)0xF8FFC00C;
//Reset HSEON, CSSON and PLLON bits
RCC->CR &= (u32)0xFEF6FFFF;
//Reset HSEBYP bit
RCC->CR &= (u32)0xFFFBFFFF;
//Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits
RCC->CFGR &= (u32)0xFF3CFFFF;
RCC->CR &= (u32)0x008FFFFF;
//Disable all interrupts and clear pending bits
RCC->CIR = 0x009F0000;
//Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers
//Configure the Flash Latency cycles and enable prefetch buffer
SetSysClock();
}
/// @brief use to return the pllm&plln.
/// @param pllclkSourceFrq : PLL source clock frquency;
/// pllclkFrq : Target PLL clock frquency;
/// plln : PLL factor PLLN
/// pllm : PLL factor PLLM
/// @retval amount of error
u32 AutoCalPllFactor(u32 pllclkSourceFrq, u32 pllclkFrq, u8* plln, u8* pllm)
{
u32 n, m;
u32 tempFrq;
u32 minDiff = pllclkFrq;
u8 flag = 0;
for(m = 0; m < 4 ; m++) {
for(n = 0; n < 64 ; n++) {
tempFrq = pllclkSourceFrq * (n + 1) / (m + 1);
tempFrq = (tempFrq > pllclkFrq) ? (tempFrq - pllclkFrq) : (pllclkFrq - tempFrq) ;
if(minDiff > tempFrq) {
minDiff = tempFrq;
*plln = n;
*pllm = m;
}
if(minDiff == 0) {
flag = 1;
break;
}
}
if(flag != 0) {
break;
}
}
return minDiff;
}
static void DELAY_xUs(u32 count)
{
u32 temp;
SysTick->CTRL = 0x0; //disable systick function
SysTick->LOAD = count * 8; //time count for 1us with HSI as SYSCLK
SysTick->VAL = 0x00; //clear counter
SysTick->CTRL = 0x5; //start discrease with Polling
do {
temp = SysTick->CTRL;
} while((temp & 0x01) && !(temp & (1 << 16))); //wait time count done
SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk; //Close Counter
SysTick->VAL = 0X00; //clear counter
}
/// @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
/// @param None
/// @retval None
static void SetSysClock(void)
{
CACHE->CCR &= ~(0x3 << 3);
CACHE->CCR |= 1;
while((CACHE->SR & 0x3) != 2);
#ifdef SYSCLK_FREQ_HSE
SetSysClockToHSE();
#elif defined SYSCLK_FREQ_24MHz
SetSysClockTo24();
#elif defined SYSCLK_FREQ_36MHz
SetSysClockTo36();
#elif defined SYSCLK_FREQ_48MHz
SetSysClockTo48();
#elif defined SYSCLK_FREQ_XXMHz
SetSysClockToXX();
#elif defined SYSCLK_HSI_24MHz
SetSysClockTo24_HSI();
#elif defined SYSCLK_HSI_36MHz
SetSysClockTo36_HSI();
#elif defined SYSCLK_HSI_48MHz
SetSysClockTo48_HSI();
#elif defined SYSCLK_HSI_XXMHz
SetSysClockToXX_HSI();
#endif
//If none of the define above is enabled, the HSI is used as System clock
//source (default after reset)
}
#ifdef SYSCLK_FREQ_HSE
/// @brief Selects HSE as System clock source and configure HCLK, PCLK2
/// and PCLK1 prescalers.
/// @note This function should be used only after reset.
/// @param None
/// @retval None
static void SetSysClockToHSE(void)
{
__IO u32 StartUpCounter = 0, HSEStatus = 0;
s32 i;
//SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------
//Enable HSE
RCC->CR |= ((u32)RCC_CR_HSEON);
//Wait till HSE is ready and if Time out is reached exit
do {
HSEStatus = RCC->CR & RCC_CR_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CR & RCC_CR_HSERDY) != RESET) {
HSEStatus = (u32)0x01;
i = 2000;
while(i--);
}
else {
HSEStatus = (u32)0x00;
}
if (HSEStatus == (u32)0x01) {
//Enable Prefetch Buffer
FLASH->ACR |= FLASH_ACR_PRFTBE;
//Flash 0 wait state ,bit0~2
FLASH->ACR &= ~0x07;
//HCLK = SYSCLK
RCC->CFGR |= (u32)RCC_CFGR_HPRE_DIV1;
//PCLK2 = HCLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE2_DIV1;
//PCLK1 = HCLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE1_DIV1;
//Select HSE as system clock source
RCC->CFGR &= (u32)((u32)~(RCC_CFGR_SW));
RCC->CFGR |= (u32)RCC_CFGR_SW_HSE;
//Wait till HSE is used as system clock source
while ((RCC->CFGR & (u32)RCC_CFGR_SWS) != (u32)0x04) {
}
}
else {
//If HSE fails to start-up, the application will have wrong clock
//configuration. User can add here some code to deal with this error
}
}
#elif defined SYSCLK_FREQ_24MHz
/// @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2
/// and PCLK1 prescalers.
/// @note This function should be used only after reset.
/// @param None
/// @retval None
static void SetSysClockTo24(void)
{
__IO u32 StartUpCounter = 0, HSEStatus = 0;
s32 i;
//SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------
//Enable HSE
RCC->CR |= ((u32)RCC_CR_HSEON);
//Wait till HSE is ready and if Time out is reached exit
do {
HSEStatus = RCC->CR & RCC_CR_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CR & RCC_CR_HSERDY) != RESET) {
HSEStatus = (u32)0x01;
i = 2000;
while(i--);
}
else {
HSEStatus = (u32)0x00;
}
if (HSEStatus == (u32)0x01) {
//Enable Prefetch Buffer
FLASH->ACR |= FLASH_ACR_PRFTBE;
//Flash 0 wait state ,bit0~2
FLASH->ACR &= ~0x07;
FLASH->ACR |= 0x01;
//HCLK = SYSCLK
RCC->CFGR |= (u32)RCC_CFGR_HPRE_DIV1;
//PCLK2 = HCLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE2_DIV1;
//PCLK1 = HCLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE1_DIV1;
// PLL configuration: = (HSE ) * (2+1) = 24 MHz
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLXTPRE) ;
RCC->PLLCFGR |= (u32 ) RCC_PLLCFGR_PLLSRC ;
RCC->APB1ENR |= RCC_APB1ENR_PWR;
RCC->PLLCFGR &= (u32)((~RCC_PLLCFGR_PLL_DN) & (~RCC_PLLCFGR_PLL_DP));
RCC->PLLCFGR |= ((0 << RCC_PLLCFGR_PLL_DN_Pos) | (2 << RCC_PLLCFGR_PLL_DP_Pos));
//Enable PLL
RCC->CR |= RCC_CR_PLLON;
//Wait till PLL is ready
while((RCC->CR & RCC_CR_PLLRDY) == 0) {
}
//Select PLL as system clock source
RCC->CFGR &= (u32)((u32)~(RCC_CFGR_SW));
RCC->CFGR |= (u32)RCC_CFGR_SW_PLL;
//Wait till PLL is used as system clock source
while ((RCC->CFGR & (u32)RCC_CFGR_SWS) != (u32)0x08) {
}
}
else {
//If HSE fails to start-up, the application will have wrong clock
//configuration. User can add here some code to deal with this error
}
}
#elif defined SYSCLK_FREQ_36MHz
/// @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2
/// and PCLK1 prescalers.
/// @note This function should be used only after reset.
/// @param None
/// @retval None
static void SetSysClockTo36(void)
{
s32 i;
__IO u32 StartUpCounter = 0, HSEStatus = 0;
//SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------
//Enable HSE
RCC->CR |= ((u32)RCC_CR_HSEON);
//Wait till HSE is ready and if Time out is reached exit
do {
HSEStatus = RCC->CR & RCC_CR_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CR & RCC_CR_HSERDY) != RESET) {
HSEStatus = (u32)0x01;
i = 2000;
while(i--);
}
else {
HSEStatus = (u32)0x00;
}
if (HSEStatus == (u32)0x01) {
//Enable Prefetch Buffer
FLASH->ACR |= FLASH_ACR_PRFTBE;
//Flash 0 wait state ,bit0~2
FLASH->ACR &= ~0x07;
FLASH->ACR |= 0x01;
//HCLK = SYSCLK
RCC->CFGR |= (u32)RCC_CFGR_HPRE_DIV1;
//PCLK2 = HCLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE2_DIV1;
//PCLK1 = HCLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE1_DIV1;
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLXTPRE) ;
RCC->PLLCFGR |= (u32 ) RCC_PLLCFGR_PLLSRC ;
RCC->APB1ENR |= RCC_APB1ENR_PWR;
RCC->PLLCFGR &= (u32)((~RCC_PLLCFGR_PLL_DN) & (~RCC_PLLCFGR_PLL_DP));
RCC->PLLCFGR |= ((1 << RCC_PLLCFGR_PLL_DN_Pos) | (8 << RCC_PLLCFGR_PLL_DP_Pos));
//Enable PLL
RCC->CR |= RCC_CR_PLLON;
//Wait till PLL is ready
while((RCC->CR & RCC_CR_PLLRDY) == 0) {
}
//Select PLL as system clock source
RCC->CFGR &= (u32)((u32)~(RCC_CFGR_SW));
RCC->CFGR |= (u32)RCC_CFGR_SW_PLL;
//Wait till PLL is used as system clock source
while ((RCC->CFGR & (u32)RCC_CFGR_SWS) != (u32)0x08) {
}
}
else {
//If HSE fails to start-up, the application will have wrong clock
//configuration. User can add here some code to deal with this error
}
}
#elif defined SYSCLK_FREQ_48MHz
/// @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2
/// and PCLK1 prescalers.
/// @note This function should be used only after reset.
/// @param None
/// @retval None
static void SetSysClockTo48(void)
{
__IO u32 StartUpCounter = 0, HSEStatus = 0;
s32 i;
//SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------
//Enable HSE
RCC->CR |= ((u32)RCC_CR_HSEON);
//Wait till HSE is ready and if Time out is reached exit
do {
HSEStatus = RCC->CR & RCC_CR_HSERDY;
StartUpCounter++;
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
if ((RCC->CR & RCC_CR_HSERDY) != RESET) {
HSEStatus = (u32)0x01;
i = 2000;
while(i--);
}
else {
HSEStatus = (u32)0x00;
}
if (HSEStatus == (u32)0x01) {
//Enable Prefetch Buffer
FLASH->ACR |= FLASH_ACR_PRFTBE;
//Flash 0 wait state ,bit0~2
FLASH->ACR &= ~0x07;
FLASH->ACR |= 0x02;
//HCLK = SYSCLK
RCC->CFGR |= (u32)RCC_CFGR_HPRE_DIV1;
//PCLK2 = HCLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE2_DIV1;
//PCLK1 = HCLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE1_DIV2;
// PLL configuration: = (HSE ) * (5+1) = 48MHz
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLXTPRE) ;
RCC->PLLCFGR |= (u32 ) RCC_PLLCFGR_PLLSRC ;
RCC->APB1ENR |= RCC_APB1ENR_PWR;
RCC->PLLCFGR &= (u32)((~RCC_PLLCFGR_PLL_DN) & (~RCC_PLLCFGR_PLL_DP));
RCC->PLLCFGR |= ((0 << RCC_PLLCFGR_PLL_DN_Pos) | (5 << RCC_PLLCFGR_PLL_DP_Pos));
//Enable PLL
RCC->CR |= RCC_CR_PLLON;
//Wait till PLL is ready
while((RCC->CR & RCC_CR_PLLRDY) == 0) {
}
//Select PLL as system clock source
RCC->CFGR &= (u32)((u32)~(RCC_CFGR_SW));
RCC->CFGR |= (u32)RCC_CFGR_SW_PLL;
//Wait till PLL is used as system clock source
while ((RCC->CFGR & (u32)RCC_CFGR_SWS) != (u32)0x08) {
}
}
else {
//If HSE fails to start-up, the application will have wrong clock
//configuration. User can add here some code to deal with this error
}
}
#elif defined SYSCLK_FREQ_XXMHz
/// @brief Sets System clock frequency to XXMHz and configure HCLK, PCLK2
/// and PCLK1 prescalers.
/// @note This function should be used only after reset.
/// @param None
/// @retval None
static void SetSysClockToXX(void)
{
__IO u32 temp, tn, tm;//j,
__IO u32 StartUpCounter = 0, HSEStatus = 0;
u8 plln, pllm;
RCC->CR |= RCC_CR_HSION;
while(!(RCC->CR & RCC_CR_HSIRDY));
//PLL SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------
//Enable HSE
RCC->CR |= ((u32)RCC_CR_HSEON);
DELAY_xUs(5);
if(SystemCoreClock > 96000000) {
RCC->APB1ENR |= RCC_APB1ENR_PWR;
PWR->CR &= ~(3 << 14);
PWR->CR |= 3 << 14;
}
//Wait till HSE is ready and if Time out is reached exit
while(1) {
HSEStatus = RCC->CR & RCC_CR_HSERDY;
if(HSEStatus != 0)
break;
StartUpCounter++;
if(StartUpCounter >= (10 * HSE_STARTUP_TIMEOUT))
return;
}
if ((RCC->CR & RCC_CR_HSERDY) == RESET) {
//If HSE fails to start-up, the application will have wrong clock
//configuration. User can add here some code to deal with this error
HSEStatus = (u32)0x00;
return;
}
HSEStatus = (u32)0x01;
DELAY_xUs(5);
SystemCoreClock = SYSCLK_FREQ_XXMHz;
//Enable Prefetch Buffer
FLASH->ACR |= FLASH_ACR_PRFTBE;
//Flash 0 wait state ,bit0~2
FLASH->ACR &= ~FLASH_ACR_LATENCY;
temp = (SystemCoreClock - 1) / 24000000;
FLASH->ACR |= (temp & FLASH_ACR_LATENCY);
RCC->CFGR &= (~RCC_CFGR_HPRE) & ( ~RCC_CFGR_PPRE1) & (~RCC_CFGR_PPRE2);
//HCLK = AHB = FCLK = SYSCLK divided by 4
RCC->CFGR |= (u32)RCC_CFGR_HPRE_DIV4;
//PCLK2 = APB2 = HCLK divided by 1, APB2 is high APB CLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE2_DIV1;
if(SystemCoreClock > 72000000) {
//PCLK1 = APB1 = HCLK divided by 4, APB1 is low APB CLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE1_DIV4;
}
else if(SystemCoreClock > 36000000) {
//PCLK1 = APB1 = HCLK divided by 2, APB1 is low APB CLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE1_DIV2;
}
AutoCalPllFactor(HSE_VALUE, SystemCoreClock, &plln, &pllm);
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLXTPRE) ;
RCC->PLLCFGR |= (u32 ) RCC_PLLCFGR_PLLSRC ;
tm = (((u32)pllm) & 0x07);
tn = (((u32)plln) & 0x7F);
RCC->APB1ENR |= RCC_APB1ENR_PWR;
RCC->PLLCFGR &= (u32)((~RCC_PLLCFGR_PLL_DN) & (~RCC_PLLCFGR_PLL_DP));
RCC->PLLCFGR |= ((tn << RCC_PLLCFGR_PLL_DN_Pos) | (tm << RCC_PLLCFGR_PLL_DP_Pos));
//Enable PLL
RCC->CR |= RCC_CR_PLLON;
//Wait till PLL is ready
while((RCC->CR & RCC_CR_PLLRDY) == 0) {
__ASM ("nop") ;//__NOP();
}
//Select PLL as system clock source
RCC->CFGR &= (u32)((u32)~(RCC_CFGR_SW));
RCC->CFGR |= (u32)RCC_CFGR_SW_PLL;
//Wait till PLL is used as system clock source
while ((RCC->CFGR & (u32)RCC_CFGR_SWS) != (u32)RCC_CFGR_SWS_PLL) {
__ASM ("nop") ;//__NOP();
}
DELAY_xUs(1);
// set HCLK = AHB = FCLK = SYSCLK divided by 2
RCC->CFGR &= (~(RCC_CFGR_PPRE_0));
DELAY_xUs(1);
// set HCLK = AHB = FCLK = SYSCLK divided by 1
RCC->CFGR &= (~(RCC_CFGR_PPRE_3));
DELAY_xUs(1);
}
#elif defined SYSCLK_HSI_24MHz
void SetSysClockTo24_HSI(void)
{
u8 temp = 0;
RCC->CR |= RCC_CR_HSION;
while(!(RCC->CR & RCC_CR_HSIRDY));
FLASH->ACR = FLASH_ACR_PRFTBE;
RCC->CFGR = RCC_CFGR_PPRE1_2;
// PLL configuration: = (HSI = 8M ) * (2+1)/(0+1) = 24 MHz
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLXTPRE) ;
RCC->PLLCFGR |= (u32 ) RCC_PLLCFGR_PLLSRC ;
RCC->APB1ENR |= RCC_APB1ENR_PWR;
RCC->PLLCFGR &= (u32)((~RCC_PLLCFGR_PLL_DN) & (~RCC_PLLCFGR_PLL_DP));
RCC->PLLCFGR |= ((0 << RCC_PLLCFGR_PLL_DN_Pos) | (2 << RCC_PLLCFGR_PLL_DP_Pos));
RCC->CR |= RCC_CR_PLLON;
while(!(RCC->CR & RCC_CR_PLLRDY));
RCC->CFGR &= ~RCC_CFGR_SW;
RCC->CFGR |= RCC_CFGR_SW_PLL;
while(temp != 0x02) {
temp = RCC->CFGR >> 2;
temp &= 0x03;
}
}
#elif defined SYSCLK_HSI_36MHz
void SetSysClockTo36_HSI(void)
{
u8 temp = 0;
RCC->CR |= RCC_CR_HSION;
while(!(RCC->CR & RCC_CR_HSIRDY));
FLASH->ACR = FLASH_ACR_LATENCY_1 | FLASH_ACR_PRFTBE;
RCC->CFGR = RCC_CFGR_PPRE1_2;
// PLL configuration: = (HSI = 8M ) * (8+1)/(1+1) = 36 MHz
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLXTPRE) ;
RCC->PLLCFGR |= (u32 ) RCC_PLLCFGR_PLLSRC ;
RCC->APB1ENR |= RCC_APB1ENR_PWR;
RCC->PLLCFGR &= (u32)((~RCC_PLLCFGR_PLL_DN) & (~RCC_PLLCFGR_PLL_DP));
RCC->PLLCFGR |= ((1 << RCC_PLLCFGR_PLL_DN_Pos) | (8 << RCC_PLLCFGR_PLL_DP_Pos));
RCC->CR |= RCC_CR_PLLON;
while(!(RCC->CR & RCC_CR_PLLRDY));
RCC->CFGR &= ~ RCC_CFGR_SW;
RCC->CFGR |= RCC_CFGR_SW_PLL;
while(temp != 0x02) {
temp = RCC->CFGR >> 2;
temp &= 0x03;
}
}
#elif defined SYSCLK_HSI_48MHz
void SetSysClockTo48_HSI(void)
{
u8 temp = 0;
RCC->CR |= RCC_CR_HSION;
while(!(RCC->CR & RCC_CR_HSIRDY));
FLASH->ACR = FLASH_ACR_LATENCY_1 | FLASH_ACR_PRFTBE;
RCC->CFGR = RCC_CFGR_PPRE1_2;
// PLL configuration: = (HSI = 8M ) * (5+1)/(0+1) = 36 MHz
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLXTPRE) ;
RCC->PLLCFGR |= (u32 ) RCC_PLLCFGR_PLLSRC ;
RCC->APB1ENR |= RCC_APB1ENR_PWR;
RCC->PLLCFGR &= (u32)((~RCC_PLLCFGR_PLL_DN) & (~RCC_PLLCFGR_PLL_DP));
RCC->PLLCFGR |= ((0 << RCC_PLLCFGR_PLL_DN_Pos) | (5 << RCC_PLLCFGR_PLL_DP_Pos));
RCC->CR |= RCC_CR_PLLON;
while(!(RCC->CR & RCC_CR_PLLRDY));
RCC->CFGR &= ~RCC_CFGR_SW;
RCC->CFGR |= RCC_CFGR_SW_PLL;
while(temp != 0x02) {
temp = RCC->CFGR >> 2;
temp &= 0x03;
}
}
#elif defined SYSCLK_HSI_XXMHz
static void SetSysClockToXX_HSI(void)
{
__IO u32 temp, tn, tm;
u8 plln, pllm;
RCC->CR |= RCC_CR_HSION;
while(!(RCC->CR & RCC_CR_HSIRDY));
if(SystemCoreClock > 96000000) {
RCC->APB1ENR |= RCC_APB1ENR_PWR;
PWR->CR &= ~(3 << 14);
PWR->CR |= 3 << 14;
}
SystemCoreClock = SYSCLK_HSI_XXMHz;
//Enable Prefetch Buffer
FLASH->ACR |= FLASH_ACR_PRFTBE;
//Flash 0 wait state ,bit0~2
FLASH->ACR &= ~FLASH_ACR_LATENCY;
temp = (SystemCoreClock - 1) / 24000000;
FLASH->ACR |= (temp & FLASH_ACR_LATENCY);
RCC->CFGR &= (~RCC_CFGR_HPRE) & ( ~RCC_CFGR_PPRE1) & (~RCC_CFGR_PPRE2);
//HCLK = AHB = FCLK = SYSCLK divided by 4
RCC->CFGR |= (u32)RCC_CFGR_HPRE_DIV4;
//PCLK2 = APB2 = HCLK divided by 1, APB2 is high APB CLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE2_DIV1;
if(SystemCoreClock > 72000000) {
//PCLK1 = APB1 = HCLK divided by 4, APB1 is low APB CLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE1_DIV4;
}
else if(SystemCoreClock > 36000000) {
//PCLK1 = APB1 = HCLK divided by 2, APB1 is low APB CLK
RCC->CFGR |= (u32)RCC_CFGR_PPRE1_DIV2;
}
AutoCalPllFactor(HSI_VALUE_PLL_ON, SystemCoreClock, &plln, &pllm);
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLXTPRE) ;
RCC->PLLCFGR &= ~((u32 ) RCC_PLLCFGR_PLLSRC);
tm = (((u32)pllm) & 0x07);
tn = (((u32)plln) & 0x7F);
RCC->APB1ENR |= RCC_APB1ENR_PWR;
RCC->PLLCFGR &= (u32)((~RCC_PLLCFGR_PLL_DN) & (~RCC_PLLCFGR_PLL_DP));
RCC->PLLCFGR |= ((tn << RCC_PLLCFGR_PLL_DN_Pos) | (tm << RCC_PLLCFGR_PLL_DP_Pos));
//Enable PLL
RCC->CR |= RCC_CR_PLLON;
//Wait till PLL is ready
while((RCC->CR & RCC_CR_PLLRDY) == 0) {
__ASM ("nop") ;//__NOP();
}
//Select PLL as system clock source
RCC->CFGR &= (u32)((u32)~(RCC_CFGR_SW));
RCC->CFGR |= (u32)RCC_CFGR_SW_PLL;
//Wait till PLL is used as system clock source
while ((RCC->CFGR & (u32)RCC_CFGR_SWS) != (u32)RCC_CFGR_SWS_PLL) {
__ASM ("nop") ;//__NOP();
}
DELAY_xUs(1);
// set HCLK = AHB = FCLK = SYSCLK divided by 2
RCC->CFGR &= (~(RCC_CFGR_PPRE_0));
DELAY_xUs(1);
// set HCLK = AHB = FCLK = SYSCLK divided by 1
RCC->CFGR &= (~(RCC_CFGR_PPRE_3));
DELAY_xUs(1);
}
#endif
/// @}
/// @}
/// @}
View Git Blame Copy Permalink