rt-thread-official/bsp/raspberry-pi/raspi3-32/driver/drv_sdio.h

254 lines
8.4 KiB
C

/*
* File : drv_sdio.h
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-07-29 zdzn first version
*/
#ifndef __DRV_SDIO_H__
#define __DRV_SDIO_H__
#include <rtthread.h>
#include <rtdevice.h>
#include <drivers/mmcsd_core.h>
#include "board.h"
#define MMC0_BASE_ADDR 0x3F300000
/* Struct for Intrrrupt Information */
#define SDXC_CmdDone BIT(0)
#define SDXC_DataDone BIT(1)
#define SDXC_BlockGap BIT(2)
#define SDXC_WriteRdy BIT(4)
#define SDXC_ReadRdy BIT(5)
#define SDXC_Card BIT(8)
#define SDXC_Retune BIT(12)
#define SDXC_BootAck BIT(13)
#define SDXC_EndBoot BIT(14)
#define SDXC_Err BIT(15)
#define SDXC_CTOErr BIT(16)
#define SDXC_CCRCErr BIT(17)
#define SDXC_CENDErr BIT(18)
#define SDXC_CBADErr BIT(19)
#define SDXC_DTOErr BIT(20)
#define SDXC_DCRCErr BIT(21)
#define SDXC_DENDErr BIT(22)
#define SDXC_ACMDErr BIT(24)
#define SDXC_BLKCNT_EN BIT(1)
#define SDXC_AUTO_CMD12_EN BIT(2)
#define SDXC_AUTO_CMD23_EN BIT(3)
#define SDXC_DAT_DIR BIT(4) //from card to host
#define SDXC_MULTI_BLOCK BIT(5)
#define SDXC_CMD_RSPNS_136 BIT(16)
#define SDXC_CMD_RSPNS_48 BIT(17)
#define SDXC_CMD_RSPNS_48busy BIT(16)|BIT(17)
#define SDXC_CHECK_CRC_CMD BIT(19)
#define SDXC_CMD_IXCHK_EN BIT(20)
#define SDXC_CMD_ISDATA BIT(21)
#define SDXC_CMD_SUSPEND BIT(22)
#define SDXC_CMD_RESUME BIT(23)
#define SDXC_CMD_ABORT BIT(23)|BIT(22)
#define SDXC_CMD_INHIBIT BIT(0)
#define SDXC_DAT_INHIBIT BIT(1)
#define SDXC_DAT_ACTIVE BIT(2)
#define SDXC_WRITE_TRANSFER BIT(8)
#define SDXC_READ_TRANSFER BIT(9)
struct sdhci_cmd_t
{
rt_uint32_t cmdidx;
rt_uint32_t cmdarg;
rt_uint32_t resptype;
rt_uint32_t datarw;
#define DATA_READ 1
#define DATA_WRITE 2
rt_uint32_t response[4];
};
struct sdhci_data_t
{
rt_uint8_t * buf;
rt_uint32_t flag;
rt_uint32_t blksz;
rt_uint32_t blkcnt;
};
struct sdhci_t
{
char * name;
rt_uint32_t voltages;
rt_uint32_t width;
rt_uint32_t clock;
rt_err_t removeable;
void * sdcard;
rt_err_t (*detect)(struct sdhci_t * sdhci);
rt_err_t (*setwidth)(struct sdhci_t * sdhci, rt_uint32_t width);
rt_err_t (*setclock)(struct sdhci_t * sdhci, rt_uint32_t clock);
rt_err_t (*transfer)(struct sdhci_t * sdhci, struct sdhci_cmd_t * cmd, struct sdhci_data_t * dat);
void * priv;
};
struct sdhci_pdata_t
{
rt_uint32_t virt;
};
// EMMC command flags
#define CMD_TYPE_NORMAL 0x00000000
#define CMD_TYPE_SUSPEND 0x00400000
#define CMD_TYPE_RESUME 0x00800000
#define CMD_TYPE_ABORT 0x00c00000
#define CMD_IS_DATA 0x00200000
#define CMD_IXCHK_EN 0x00100000
#define CMD_CRCCHK_EN 0x00080000
#define CMD_RSPNS_NO 0x00000000
#define CMD_RSPNS_136 0x00010000
#define CMD_RSPNS_48 0x00020000
#define CMD_RSPNS_48B 0x00030000
#define TM_MULTI_BLOCK 0x00000020
#define TM_DAT_DIR_HC 0x00000000
#define TM_DAT_DIR_CH 0x00000010
#define TM_AUTO_CMD23 0x00000008
#define TM_AUTO_CMD12 0x00000004
#define TM_BLKCNT_EN 0x00000002
#define TM_MULTI_DATA (CMD_IS_DATA|TM_MULTI_BLOCK|TM_BLKCNT_EN)
#define RCA_NO 1
#define RCA_YES 2
// INTERRUPT register settings
#define INT_AUTO_ERROR 0x01000000
#define INT_DATA_END_ERR 0x00400000
#define INT_DATA_CRC_ERR 0x00200000
#define INT_DATA_TIMEOUT 0x00100000
#define INT_INDEX_ERROR 0x00080000
#define INT_END_ERROR 0x00040000
#define INT_CRC_ERROR 0x00020000
#define INT_CMD_TIMEOUT 0x00010000
#define INT_ERR 0x00008000
#define INT_ENDBOOT 0x00004000
#define INT_BOOTACK 0x00002000
#define INT_RETUNE 0x00001000
#define INT_CARD 0x00000100
#define INT_READ_RDY 0x00000020
#define INT_WRITE_RDY 0x00000010
#define INT_BLOCK_GAP 0x00000004
#define INT_DATA_DONE 0x00000002
#define INT_CMD_DONE 0x00000001
#define INT_ERROR_MASK (INT_CRC_ERROR|INT_END_ERROR|INT_INDEX_ERROR| \
INT_DATA_TIMEOUT|INT_DATA_CRC_ERR|INT_DATA_END_ERR| \
INT_ERR|INT_AUTO_ERROR)
#define INT_ALL_MASK (INT_CMD_DONE|INT_DATA_DONE|INT_READ_RDY|INT_WRITE_RDY|INT_ERROR_MASK)
#define EMMC_ARG2 (0x00)
#define EMMC_BLKSIZECNT (0x04)
#define EMMC_ARG1 (0x08)
#define EMMC_CMDTM (0x0c)
#define EMMC_RESP0 (0x10)
#define EMMC_RESP1 (0x14)
#define EMMC_RESP2 (0x18)
#define EMMC_RESP3 (0x1c)
#define EMMC_DATA (0x20)
#define EMMC_STATUS (0x24)
#define EMMC_CONTROL0 (0x28)
#define EMMC_CONTROL1 (0x2c)
#define EMMC_INTERRUPT (0x30)
#define EMMC_IRPT_MASK (0x34)
#define EMMC_IRPT_EN (0x38)
#define EMMC_CONTROL2 (0x3c)
#define EMMC_BOOT_TIMEOUT (0x70)
#define EMMC_EXRDFIFO_EN (0x84)
#define EMMC_SPI_INT_SPT (0xf0)
#define EMMC_SLOTISR_VER (0xfc)
// CONTROL register settings
#define C0_SPI_MODE_EN 0x00100000
#define C0_HCTL_HS_EN 0x00000004
#define C0_HCTL_DWITDH 0x00000002
#define C1_SRST_DATA 0x04000000
#define C1_SRST_CMD 0x02000000
#define C1_SRST_HC 0x01000000
#define C1_TOUNIT_DIS 0x000f0000
#define C1_TOUNIT_MAX 0x000e0000
#define C1_CLK_GENSEL 0x00000020
#define C1_CLK_EN 0x00000004
#define C1_CLK_STABLE 0x00000002
#define C1_CLK_INTLEN 0x00000001
#define FREQ_SETUP 400000 // 400 Khz
#define FREQ_NORMAL 25000000 // 25 Mhz
// SLOTISR_VER values
#define HOST_SPEC_NUM 0x00ff0000
#define HOST_SPEC_NUM_SHIFT 16
#define HOST_SPEC_V3 2
#define HOST_SPEC_V2 1
#define HOST_SPEC_V1 0
// STATUS register settings
#define SR_DAT_LEVEL1 0x1e000000
#define SR_CMD_LEVEL 0x01000000
#define SR_DAT_LEVEL0 0x00f00000
#define SR_DAT3 0x00800000
#define SR_DAT2 0x00400000
#define SR_DAT1 0x00200000
#define SR_DAT0 0x00100000
#define SR_WRITE_PROT 0x00080000 // From SDHC spec v2, BCM says reserved
#define SR_READ_AVAILABLE 0x00000800 // ???? undocumented
#define SR_WRITE_AVAILABLE 0x00000400 // ???? undocumented
#define SR_READ_TRANSFER 0x00000200
#define SR_WRITE_TRANSFER 0x00000100
#define SR_DAT_ACTIVE 0x00000004
#define SR_DAT_INHIBIT 0x00000002
#define SR_CMD_INHIBIT 0x00000001
#define CONFIG_MMC_USE_DMA
#define DMA_ALIGN (32U)
#define SD_CMD_INDEX(a) ((a) << 24)
#define SD_CMD_RESERVED(a) 0xffffffff
#define SD_CMD_INDEX(a) ((a) << 24)
#define SD_CMD_TYPE_NORMAL 0x0
#define SD_CMD_TYPE_SUSPEND (1 << 22)
#define SD_CMD_TYPE_RESUME (2 << 22)
#define SD_CMD_TYPE_ABORT (3 << 22)
#define SD_CMD_TYPE_MASK (3 << 22)
#define SD_CMD_ISDATA (1 << 21)
#define SD_CMD_IXCHK_EN (1 << 20)
#define SD_CMD_CRCCHK_EN (1 << 19)
#define SD_CMD_RSPNS_TYPE_NONE 0 // For no response
#define SD_CMD_RSPNS_TYPE_136 (1 << 16) // For response R2 (with CRC), R3,4 (no CRC)
#define SD_CMD_RSPNS_TYPE_48 (2 << 16) // For responses R1, R5, R6, R7 (with CRC)
#define SD_CMD_RSPNS_TYPE_48B (3 << 16) // For responses R1b, R5b (with CRC)
#define SD_CMD_RSPNS_TYPE_MASK (3 << 16)
#define SD_CMD_MULTI_BLOCK (1 << 5)
#define SD_CMD_DAT_DIR_HC 0
#define SD_CMD_DAT_DIR_CH (1 << 4)
#define SD_CMD_AUTO_CMD_EN_NONE 0
#define SD_CMD_AUTO_CMD_EN_CMD12 (1 << 2)
#define SD_CMD_AUTO_CMD_EN_CMD23 (2 << 2)
#define SD_CMD_BLKCNT_EN (1 << 1)
#define SD_CMD_DMA 1
#define SD_RESP_NONE SD_CMD_RSPNS_TYPE_NONE
#define SD_RESP_R1 (SD_CMD_RSPNS_TYPE_48) // | SD_CMD_CRCCHK_EN)
#define SD_RESP_R1b (SD_CMD_RSPNS_TYPE_48B) // | SD_CMD_CRCCHK_EN)
#define SD_RESP_R2 (SD_CMD_RSPNS_TYPE_136) //| SD_CMD_CRCCHK_EN)
#define SD_RESP_R3 SD_CMD_RSPNS_TYPE_48
#define SD_RESP_R4 SD_CMD_RSPNS_TYPE_136
#define SD_RESP_R5 (SD_CMD_RSPNS_TYPE_48 | SD_CMD_CRCCHK_EN)
#define SD_RESP_R5b (SD_CMD_RSPNS_TYPE_48B | SD_CMD_CRCCHK_EN)
#define SD_RESP_R6 (SD_CMD_RSPNS_TYPE_48 | SD_CMD_CRCCHK_EN)
#define SD_RESP_R7 (SD_CMD_RSPNS_TYPE_48 | SD_CMD_CRCCHK_EN)
#define SD_DATA_READ (SD_CMD_ISDATA | SD_CMD_DAT_DIR_CH)
#define SD_DATA_WRITE (SD_CMD_ISDATA | SD_CMD_DAT_DIR_HC)
#endif