225 lines
6.2 KiB
C
225 lines
6.2 KiB
C
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2018-10-03 xuzhuoyi first implementation.
|
|
*/
|
|
|
|
#include "drv_touch.h"
|
|
#include "drivers/i2c.h"
|
|
|
|
#ifdef PKG_USING_LITTLEVGL2RTT
|
|
#include "littlevgl2rtt.h"
|
|
#endif
|
|
|
|
|
|
#define TSC_I2C_ADDR 0x41 /* 7-bit I2C address */
|
|
|
|
static struct rt_i2c_bus_device *stmpe811_i2c_bus;
|
|
|
|
|
|
/**
|
|
\fn int32_t touch_readRegister (uint8_t reg, uint8_t *val)
|
|
\brief Read register value from Touchscreen controller
|
|
\param[in] reg Register address
|
|
\param[out] val Pointer where data will be read from register
|
|
\returns
|
|
- \b 0: function succeeded
|
|
- \b -1: function failed
|
|
*/
|
|
static int32_t touch_read (uint8_t reg, uint8_t *val)
|
|
{
|
|
struct rt_i2c_msg msgs[2];
|
|
|
|
msgs[0].addr = TSC_I2C_ADDR;
|
|
msgs[0].flags = RT_I2C_WR;
|
|
msgs[0].buf = ®
|
|
msgs[0].len = 1;
|
|
|
|
msgs[1].addr = TSC_I2C_ADDR;
|
|
msgs[1].flags = RT_I2C_RD;
|
|
msgs[1].buf = val;
|
|
msgs[1].len = 1;
|
|
|
|
if (rt_i2c_transfer(stmpe811_i2c_bus, msgs, 2) == 2)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
else
|
|
{
|
|
return -RT_ERROR;
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
\fn int32_t touch_writeData (uint8_t reg, const uint8_t *val)
|
|
\brief Write value to Touchscreen controller register
|
|
\param[in] reg Register address
|
|
\param[in] val Pointer with data to write to register
|
|
\returns
|
|
- \b 0: function succeeded
|
|
- \b -1: function failed
|
|
*/
|
|
static int32_t touch_write(uint8_t reg, uint8_t val)
|
|
{
|
|
struct rt_i2c_msg msgs;
|
|
rt_uint8_t buf[2];
|
|
|
|
buf[0] = reg;
|
|
buf[1] = val;
|
|
|
|
msgs.addr = TSC_I2C_ADDR;
|
|
msgs.flags = RT_I2C_WR;
|
|
msgs.buf = buf;
|
|
msgs.len = 2;
|
|
|
|
if (rt_i2c_transfer(stmpe811_i2c_bus, &msgs, 1) == 1)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
else
|
|
{
|
|
return -RT_ERROR;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/**
|
|
\fn int32_t Touch_Initialize (void)
|
|
\brief Initialize touchscreen
|
|
\returns
|
|
- \b 0: function succeeded
|
|
- \b -1: function failed
|
|
*/
|
|
static rt_err_t stmpe811_touch_init(rt_device_t dev)
|
|
{
|
|
stmpe811_i2c_bus = rt_i2c_bus_device_find("i2c3");
|
|
|
|
touch_write(STMPE811_SYS_CTRL1, 0x02); /* Reset Touch-screen controller */
|
|
rt_thread_mdelay(10); /* Wait 10ms */
|
|
|
|
|
|
touch_write(STMPE811_SYS_CTRL2, 0x0C); /* Enable TSC and ADC */
|
|
touch_write(STMPE811_ADC_CTRL1, 0x68); /* Set sample time , 12-bit mode */
|
|
rt_thread_mdelay(1); /* Wait 1ms */
|
|
|
|
touch_write(STMPE811_ADC_CTRL2, 0x01); /* ADC frequency 3.25 MHz */
|
|
touch_write(STMPE811_TSC_CFG, 0xC2); /* Detect delay 10us,
|
|
Settle time 500us */
|
|
touch_write(STMPE811_FIFO_TH, 0x01); /* Threshold for FIFO */
|
|
touch_write(STMPE811_FIFO_STA, 0x01); /* FIFO reset */
|
|
touch_write(STMPE811_FIFO_STA, 0x00); /* FIFO not reset */
|
|
touch_write(STMPE811_TSC_FRACTION_Z, 0x07); /* Fraction z */
|
|
touch_write(STMPE811_TSC_I_DRIVE, 0x01); /* Drive 50 mA typical */
|
|
touch_write(STMPE811_GPIO_AF, 0x00); /* Pins are used for touchscreen */
|
|
touch_write(STMPE811_TSC_CTRL, 0x01); /* Enable TSC */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
\fn int32_t Touch_Uninitialize (void)
|
|
\brief De-initialize touchscreen
|
|
\returns
|
|
- \b 0: function succeeded
|
|
- \b -1: function failed
|
|
*/
|
|
int32_t touch_uninitialize (void) {
|
|
touch_write(STMPE811_SYS_CTRL1, 0x02); /* Reset Touch-screen controller */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
\fn int32_t Touch_GetState (TOUCH_STATE *pState)
|
|
\brief Get touchscreen state
|
|
\param[out] pState pointer to TOUCH_STATE structure
|
|
\returns
|
|
- \b 0: function succeeded
|
|
- \b -1: function failed
|
|
*/
|
|
int32_t touch_get_state(struct touch_state *state)
|
|
{
|
|
uint8_t val;
|
|
uint8_t num;
|
|
uint8_t xyz[4];
|
|
int32_t res;
|
|
struct rt_i2c_msg msgs[2];
|
|
|
|
/* Read touch status */
|
|
res = touch_read(STMPE811_TSC_CTRL, &val);
|
|
if (res < 0) return -1;
|
|
state->pressed = (val & (1 << 7)) ? 1 : 0;
|
|
|
|
if (state->pressed)
|
|
{
|
|
val = STMPE811_TSC_DATA;
|
|
|
|
/* If FIFO overflow, discard all samples except the last one */
|
|
res = touch_read(STMPE811_FIFO_SIZE, &num);
|
|
if (res < 0 || num == 0) return -1;
|
|
|
|
while (num--)
|
|
{
|
|
msgs[0].addr = TSC_I2C_ADDR;
|
|
msgs[0].flags = RT_I2C_WR;
|
|
msgs[0].buf = &val;
|
|
msgs[0].len = 1;
|
|
|
|
//rt_i2c_transfer(stmpe811_i2c_bus, &msgs, 1);
|
|
//ptrI2C->MasterTransmit (TSC_I2C_ADDR, &val, 1, true);
|
|
//while (ptrI2C->GetStatus().busy);
|
|
msgs[1].addr = TSC_I2C_ADDR;
|
|
msgs[1].flags = RT_I2C_RD;
|
|
msgs[1].buf = xyz;
|
|
msgs[1].len = 4;
|
|
rt_i2c_transfer(stmpe811_i2c_bus, msgs, 2);
|
|
//ptrI2C->MasterReceive (TSC_I2C_ADDR, xyz, 4, false);
|
|
//while (ptrI2C->GetStatus().busy);
|
|
}
|
|
state->x = (int16_t)((xyz[0] << 4) | ((xyz[1] & 0xF0) >> 4));
|
|
state->y = (int16_t) (xyz[2] | ((xyz[1] & 0x0F) << 8));
|
|
}
|
|
else
|
|
{
|
|
/* Clear all data in FIFO */
|
|
touch_write(STMPE811_FIFO_STA, 0x1);
|
|
touch_write(STMPE811_FIFO_STA, 0x0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void touch_show_state()
|
|
{
|
|
int16_t x;
|
|
int16_t y;
|
|
struct touch_state ts;
|
|
touch_get_state(&ts);
|
|
x = (3706 - ts.x) / 14;
|
|
y = (-461 + ts.y) / 10.5;
|
|
rt_kprintf("[drv_touch] touch_show_state, x: %d, y: %d, pressed: %d, padding: %d\n", ts.x , ts.y, ts.pressed, ts.padding);
|
|
rt_kprintf("[drv_touch] touch_show_state, phy x: %d, phy y: %d\n", x , y);
|
|
}
|
|
MSH_CMD_EXPORT(touch_show_state, show screen coordinate in touching);
|
|
|
|
static int rt_hw_touch_init(void)
|
|
{
|
|
static struct rt_device touch;
|
|
|
|
/* init device structure */
|
|
touch.type = RT_Device_Class_Unknown;
|
|
touch.init = stmpe811_touch_init;
|
|
touch.user_data = RT_NULL;
|
|
|
|
/* register touch device to RT-Thread */
|
|
rt_device_register(&touch, "touch", RT_DEVICE_FLAG_RDWR);
|
|
|
|
return RT_EOK;
|
|
}
|
|
INIT_BOARD_EXPORT(rt_hw_touch_init);
|