libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/sam7x/drivers/sd.c

663 lines
30 KiB
C
Raw Blame History

#include <rtthread.h>
#include <dfs_fs.h>
#include "sd.h"
#include <AT91SAM7X.h>
// *****************************************************************************
// PIO DEFINITIONS FOR AT91SAM7X256
// *****************************************************************************
#define AT91C_PIO_PA0 ((unsigned int) 1 << 0) // Pin Controlled by PA0
#define AT91C_PA0_RXD0 ((unsigned int) AT91C_PIO_PA0) // USART 0 Receive Data
#define AT91C_PIO_PA1 ((unsigned int) 1 << 1) // Pin Controlled by PA1
#define AT91C_PA1_TXD0 ((unsigned int) AT91C_PIO_PA1) // USART 0 Transmit Data
#define AT91C_PIO_PA10 ((unsigned int) 1 << 10) // Pin Controlled by PA10
#define AT91C_PA10_TWD ((unsigned int) AT91C_PIO_PA10) // TWI Two-wire Serial Data
#define AT91C_PIO_PA11 ((unsigned int) 1 << 11) // Pin Controlled by PA11
#define AT91C_PA11_TWCK ((unsigned int) AT91C_PIO_PA11) // TWI Two-wire Serial Clock
#define AT91C_PIO_PA12 ((unsigned int) 1 << 12) // Pin Controlled by PA12
#define AT91C_PA12_SPI0_NPCS0 ((unsigned int) AT91C_PIO_PA12) // SPI 0 Peripheral Chip Select 0
#define AT91C_PIO_PA13 ((unsigned int) 1 << 13) // Pin Controlled by PA13
#define AT91C_PA13_SPI0_NPCS1 ((unsigned int) AT91C_PIO_PA13) // SPI 0 Peripheral Chip Select 1
#define AT91C_PA13_PCK1 ((unsigned int) AT91C_PIO_PA13) // PMC Programmable Clock Output 1
#define AT91C_PIO_PA14 ((unsigned int) 1 << 14) // Pin Controlled by PA14
#define AT91C_PA14_SPI0_NPCS2 ((unsigned int) AT91C_PIO_PA14) // SPI 0 Peripheral Chip Select 2
#define AT91C_PA14_IRQ1 ((unsigned int) AT91C_PIO_PA14) // External Interrupt 1
#define AT91C_PIO_PA15 ((unsigned int) 1 << 15) // Pin Controlled by PA15
#define AT91C_PA15_SPI0_NPCS3 ((unsigned int) AT91C_PIO_PA15) // SPI 0 Peripheral Chip Select 3
#define AT91C_PA15_TCLK2 ((unsigned int) AT91C_PIO_PA15) // Timer Counter 2 external clock input
#define AT91C_PIO_PA16 ((unsigned int) 1 << 16) // Pin Controlled by PA16
#define AT91C_PA16_SPI0_MISO ((unsigned int) AT91C_PIO_PA16) // SPI 0 Master In Slave
#define AT91C_PIO_PA17 ((unsigned int) 1 << 17) // Pin Controlled by PA17
#define AT91C_PA17_SPI0_MOSI ((unsigned int) AT91C_PIO_PA17) // SPI 0 Master Out Slave
#define AT91C_PIO_PA18 ((unsigned int) 1 << 18) // Pin Controlled by PA18
#define AT91C_PA18_SPI0_SPCK ((unsigned int) AT91C_PIO_PA18) // SPI 0 Serial Clock
#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) // Pin Controlled by PA19
#define AT91C_PA19_CANRX ((unsigned int) AT91C_PIO_PA19) // CAN Receive
#define AT91C_PIO_PA2 ((unsigned int) 1 << 2) // Pin Controlled by PA2
#define AT91C_PA2_SCK0 ((unsigned int) AT91C_PIO_PA2) // USART 0 Serial Clock
#define AT91C_PA2_SPI1_NPCS1 ((unsigned int) AT91C_PIO_PA2) // SPI 1 Peripheral Chip Select 1
#define AT91C_PIO_PA20 ((unsigned int) 1 << 20) // Pin Controlled by PA20
#define AT91C_PA20_CANTX ((unsigned int) AT91C_PIO_PA20) // CAN Transmit
#define AT91C_PIO_PA21 ((unsigned int) 1 << 21) // Pin Controlled by PA21
#define AT91C_PA21_TF ((unsigned int) AT91C_PIO_PA21) // SSC Transmit Frame Sync
#define AT91C_PA21_SPI1_NPCS0 ((unsigned int) AT91C_PIO_PA21) // SPI 1 Peripheral Chip Select 0
#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) // Pin Controlled by PA22
#define AT91C_PA22_TK ((unsigned int) AT91C_PIO_PA22) // SSC Transmit Clock
#define AT91C_PA22_SPI1_SPCK ((unsigned int) AT91C_PIO_PA22) // SPI 1 Serial Clock
#define AT91C_PIO_PA23 ((unsigned int) 1 << 23) // Pin Controlled by PA23
#define AT91C_PA23_TD ((unsigned int) AT91C_PIO_PA23) // SSC Transmit data
#define AT91C_PA23_SPI1_MOSI ((unsigned int) AT91C_PIO_PA23) // SPI 1 Master Out Slave
#define AT91C_PIO_PA24 ((unsigned int) 1 << 24) // Pin Controlled by PA24
#define AT91C_PA24_RD ((unsigned int) AT91C_PIO_PA24) // SSC Receive Data
#define AT91C_PA24_SPI1_MISO ((unsigned int) AT91C_PIO_PA24) // SPI 1 Master In Slave
#define AT91C_PIO_PA25 ((unsigned int) 1 << 25) // Pin Controlled by PA25
#define AT91C_PA25_RK ((unsigned int) AT91C_PIO_PA25) // SSC Receive Clock
#define AT91C_PA25_SPI1_NPCS1 ((unsigned int) AT91C_PIO_PA25) // SPI 1 Peripheral Chip Select 1
#define AT91C_PIO_PA26 ((unsigned int) 1 << 26) // Pin Controlled by PA26
#define AT91C_PA26_RF ((unsigned int) AT91C_PIO_PA26) // SSC Receive Frame Sync
#define AT91C_PA26_SPI1_NPCS2 ((unsigned int) AT91C_PIO_PA26) // SPI 1 Peripheral Chip Select 2
#define AT91C_PIO_PA27 ((unsigned int) 1 << 27) // Pin Controlled by PA27
#define AT91C_PA27_DRXD ((unsigned int) AT91C_PIO_PA27) // DBGU Debug Receive Data
#define AT91C_PA27_PCK3 ((unsigned int) AT91C_PIO_PA27) // PMC Programmable Clock Output 3
#define AT91C_PIO_PA28 ((unsigned int) 1 << 28) // Pin Controlled by PA28
#define AT91C_PA28_DTXD ((unsigned int) AT91C_PIO_PA28) // DBGU Debug Transmit Data
#define AT91C_PIO_PA29 ((unsigned int) 1 << 29) // Pin Controlled by PA29
#define AT91C_PA29_FIQ ((unsigned int) AT91C_PIO_PA29) // AIC Fast Interrupt Input
#define AT91C_PA29_SPI1_NPCS3 ((unsigned int) AT91C_PIO_PA29) // SPI 1 Peripheral Chip Select 3
#define AT91C_PIO_PA3 ((unsigned int) 1 << 3) // Pin Controlled by PA3
#define AT91C_PA3_RTS0 ((unsigned int) AT91C_PIO_PA3) // USART 0 Ready To Send
#define AT91C_PA3_SPI1_NPCS2 ((unsigned int) AT91C_PIO_PA3) // SPI 1 Peripheral Chip Select 2
#define AT91C_PIO_PA30 ((unsigned int) 1 << 30) // Pin Controlled by PA30
#define AT91C_PA30_IRQ0 ((unsigned int) AT91C_PIO_PA30) // External Interrupt 0
#define AT91C_PA30_PCK2 ((unsigned int) AT91C_PIO_PA30) // PMC Programmable Clock Output 2
#define AT91C_PIO_PA4 ((unsigned int) 1 << 4) // Pin Controlled by PA4
#define AT91C_PA4_CTS0 ((unsigned int) AT91C_PIO_PA4) // USART 0 Clear To Send
#define AT91C_PA4_SPI1_NPCS3 ((unsigned int) AT91C_PIO_PA4) // SPI 1 Peripheral Chip Select 3
#define AT91C_PIO_PA5 ((unsigned int) 1 << 5) // Pin Controlled by PA5
#define AT91C_PA5_RXD1 ((unsigned int) AT91C_PIO_PA5) // USART 1 Receive Data
#define AT91C_PIO_PA6 ((unsigned int) 1 << 6) // Pin Controlled by PA6
#define AT91C_PA6_TXD1 ((unsigned int) AT91C_PIO_PA6) // USART 1 Transmit Data
#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) // Pin Controlled by PA7
#define AT91C_PA7_SCK1 ((unsigned int) AT91C_PIO_PA7) // USART 1 Serial Clock
#define AT91C_PA7_SPI0_NPCS1 ((unsigned int) AT91C_PIO_PA7) // SPI 0 Peripheral Chip Select 1
#define AT91C_PIO_PA8 ((unsigned int) 1 << 8) // Pin Controlled by PA8
#define AT91C_PA8_RTS1 ((unsigned int) AT91C_PIO_PA8) // USART 1 Ready To Send
#define AT91C_PA8_SPI0_NPCS2 ((unsigned int) AT91C_PIO_PA8) // SPI 0 Peripheral Chip Select 2
#define AT91C_PIO_PA9 ((unsigned int) 1 << 9) // Pin Controlled by PA9
#define AT91C_PA9_CTS1 ((unsigned int) AT91C_PIO_PA9) // USART 1 Clear To Send
#define AT91C_PA9_SPI0_NPCS3 ((unsigned int) AT91C_PIO_PA9) // SPI 0 Peripheral Chip Select 3
#define AT91C_PIO_PB0 ((unsigned int) 1 << 0) // Pin Controlled by PB0
#define AT91C_PB0_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PB0) // Ethernet MAC Transmit Clock/Reference Clock
#define AT91C_PB0_PCK0 ((unsigned int) AT91C_PIO_PB0) // PMC Programmable Clock Output 0
#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) // Pin Controlled by PB1
#define AT91C_PB1_ETXEN ((unsigned int) AT91C_PIO_PB1) // Ethernet MAC Transmit Enable
#define AT91C_PIO_PB10 ((unsigned int) 1 << 10) // Pin Controlled by PB10
#define AT91C_PB10_ETX2 ((unsigned int) AT91C_PIO_PB10) // Ethernet MAC Transmit Data 2
#define AT91C_PB10_SPI1_NPCS1 ((unsigned int) AT91C_PIO_PB10) // SPI 1 Peripheral Chip Select 1
#define AT91C_PIO_PB11 ((unsigned int) 1 << 11) // Pin Controlled by PB11
#define AT91C_PB11_ETX3 ((unsigned int) AT91C_PIO_PB11) // Ethernet MAC Transmit Data 3
#define AT91C_PB11_SPI1_NPCS2 ((unsigned int) AT91C_PIO_PB11) // SPI 1 Peripheral Chip Select 2
#define AT91C_PIO_PB12 ((unsigned int) 1 << 12) // Pin Controlled by PB12
#define AT91C_PB12_ETXER ((unsigned int) AT91C_PIO_PB12) // Ethernet MAC Transmikt Coding Error
#define AT91C_PB12_TCLK0 ((unsigned int) AT91C_PIO_PB12) // Timer Counter 0 external clock input
#define AT91C_PIO_PB13 ((unsigned int) 1 << 13) // Pin Controlled by PB13
#define AT91C_PB13_ERX2 ((unsigned int) AT91C_PIO_PB13) // Ethernet MAC Receive Data 2
#define AT91C_PB13_SPI0_NPCS1 ((unsigned int) AT91C_PIO_PB13) // SPI 0 Peripheral Chip Select 1
#define AT91C_PIO_PB14 ((unsigned int) 1 << 14) // Pin Controlled by PB14
#define AT91C_PB14_ERX3 ((unsigned int) AT91C_PIO_PB14) // Ethernet MAC Receive Data 3
#define AT91C_PB14_SPI0_NPCS2 ((unsigned int) AT91C_PIO_PB14) // SPI 0 Peripheral Chip Select 2
#define AT91C_PIO_PB15 ((unsigned int) 1 << 15) // Pin Controlled by PB15
#define AT91C_PB15_ERXDV_ECRSDV ((unsigned int) AT91C_PIO_PB15) // Ethernet MAC Receive Data Valid
#define AT91C_PIO_PB16 ((unsigned int) 1 << 16) // Pin Controlled by PB16
#define AT91C_PB16_ECOL ((unsigned int) AT91C_PIO_PB16) // Ethernet MAC Collision Detected
#define AT91C_PB16_SPI1_NPCS3 ((unsigned int) AT91C_PIO_PB16) // SPI 1 Peripheral Chip Select 3
#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) // Pin Controlled by PB17
#define AT91C_PB17_ERXCK ((unsigned int) AT91C_PIO_PB17) // Ethernet MAC Receive Clock
#define AT91C_PB17_SPI0_NPCS3 ((unsigned int) AT91C_PIO_PB17) // SPI 0 Peripheral Chip Select 3
#define AT91C_PIO_PB18 ((unsigned int) 1 << 18) // Pin Controlled by PB18
#define AT91C_PB18_EF100 ((unsigned int) AT91C_PIO_PB18) // Ethernet MAC Force 100 Mbits/sec
#define AT91C_PB18_ADTRG ((unsigned int) AT91C_PIO_PB18) // ADC External Trigger
#define AT91C_PIO_PB19 ((unsigned int) 1 << 19) // Pin Controlled by PB19
#define AT91C_PB19_PWM0 ((unsigned int) AT91C_PIO_PB19) // PWM Channel 0
#define AT91C_PB19_TCLK1 ((unsigned int) AT91C_PIO_PB19) // Timer Counter 1 external clock input
#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) // Pin Controlled by PB2
#define AT91C_PB2_ETX0 ((unsigned int) AT91C_PIO_PB2) // Ethernet MAC Transmit Data 0
#define AT91C_PIO_PB20 ((unsigned int) 1 << 20) // Pin Controlled by PB20
#define AT91C_PB20_PWM1 ((unsigned int) AT91C_PIO_PB20) // PWM Channel 1
#define AT91C_PB20_PCK0 ((unsigned int) AT91C_PIO_PB20) // PMC Programmable Clock Output 0
#define AT91C_PIO_PB21 ((unsigned int) 1 << 21) // Pin Controlled by PB21
#define AT91C_PB21_PWM2 ((unsigned int) AT91C_PIO_PB21) // PWM Channel 2
#define AT91C_PB21_PCK1 ((unsigned int) AT91C_PIO_PB21) // PMC Programmable Clock Output 1
#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) // Pin Controlled by PB22
#define AT91C_PB22_PWM3 ((unsigned int) AT91C_PIO_PB22) // PWM Channel 3
#define AT91C_PB22_PCK2 ((unsigned int) AT91C_PIO_PB22) // PMC Programmable Clock Output 2
#define AT91C_PIO_PB23 ((unsigned int) 1 << 23) // Pin Controlled by PB23
#define AT91C_PB23_TIOA0 ((unsigned int) AT91C_PIO_PB23) // Timer Counter 0 Multipurpose Timer I/O Pin A
#define AT91C_PB23_DCD1 ((unsigned int) AT91C_PIO_PB23) // USART 1 Data Carrier Detect
#define AT91C_PIO_PB24 ((unsigned int) 1 << 24) // Pin Controlled by PB24
#define AT91C_PB24_TIOB0 ((unsigned int) AT91C_PIO_PB24) // Timer Counter 0 Multipurpose Timer I/O Pin B
#define AT91C_PB24_DSR1 ((unsigned int) AT91C_PIO_PB24) // USART 1 Data Set ready
#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) // Pin Controlled by PB25
#define AT91C_PB25_TIOA1 ((unsigned int) AT91C_PIO_PB25) // Timer Counter 1 Multipurpose Timer I/O Pin A
#define AT91C_PB25_DTR1 ((unsigned int) AT91C_PIO_PB25) // USART 1 Data Terminal ready
#define AT91C_PIO_PB26 ((unsigned int) 1 << 26) // Pin Controlled by PB26
#define AT91C_PB26_TIOB1 ((unsigned int) AT91C_PIO_PB26) // Timer Counter 1 Multipurpose Timer I/O Pin B
#define AT91C_PB26_RI1 ((unsigned int) AT91C_PIO_PB26) // USART 1 Ring Indicator
#define AT91C_PIO_PB27 ((unsigned int) 1 << 27) // Pin Controlled by PB27
#define AT91C_PB27_TIOA2 ((unsigned int) AT91C_PIO_PB27) // Timer Counter 2 Multipurpose Timer I/O Pin A
#define AT91C_PB27_PWM0 ((unsigned int) AT91C_PIO_PB27) // PWM Channel 0
#define AT91C_PIO_PB28 ((unsigned int) 1 << 28) // Pin Controlled by PB28
#define AT91C_PB28_TIOB2 ((unsigned int) AT91C_PIO_PB28) // Timer Counter 2 Multipurpose Timer I/O Pin B
#define AT91C_PB28_PWM1 ((unsigned int) AT91C_PIO_PB28) // PWM Channel 1
#define AT91C_PIO_PB29 ((unsigned int) 1 << 29) // Pin Controlled by PB29
#define AT91C_PB29_PCK1 ((unsigned int) AT91C_PIO_PB29) // PMC Programmable Clock Output 1
#define AT91C_PB29_PWM2 ((unsigned int) AT91C_PIO_PB29) // PWM Channel 2
#define AT91C_PIO_PB3 ((unsigned int) 1 << 3) // Pin Controlled by PB3
#define AT91C_PB3_ETX1 ((unsigned int) AT91C_PIO_PB3) // Ethernet MAC Transmit Data 1
#define AT91C_PIO_PB30 ((unsigned int) 1 << 30) // Pin Controlled by PB30
#define AT91C_PB30_PCK2 ((unsigned int) AT91C_PIO_PB30) // PMC Programmable Clock Output 2
#define AT91C_PB30_PWM3 ((unsigned int) AT91C_PIO_PB30) // PWM Channel 3
#define AT91C_PIO_PB4 ((unsigned int) 1 << 4) // Pin Controlled by PB4
#define AT91C_PB4_ECRS ((unsigned int) AT91C_PIO_PB4) // Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) // Pin Controlled by PB5
#define AT91C_PB5_ERX0 ((unsigned int) AT91C_PIO_PB5) // Ethernet MAC Receive Data 0
#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) // Pin Controlled by PB6
#define AT91C_PB6_ERX1 ((unsigned int) AT91C_PIO_PB6) // Ethernet MAC Receive Data 1
#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) // Pin Controlled by PB7
#define AT91C_PB7_ERXER ((unsigned int) AT91C_PIO_PB7) // Ethernet MAC Receive Error
#define AT91C_PIO_PB8 ((unsigned int) 1 << 8) // Pin Controlled by PB8
#define AT91C_PB8_EMDC ((unsigned int) AT91C_PIO_PB8) // Ethernet MAC Management Data Clock
#define AT91C_PIO_PB9 ((unsigned int) 1 << 9) // Pin Controlled by PB9
#define AT91C_PB9_EMDIO ((unsigned int) AT91C_PIO_PB9) // Ethernet MAC Management Data Input/Output
#define CARD_WP_PIN AT91C_PIO_PA16
#define CARD_INS_PIN AT91C_PIO_PA15
#define CARD_PWR_PIN AT91C_PIO_PA12
typedef volatile unsigned int AT91S_REG;// Hardware register definition
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Serial Parallel Interface
// *****************************************************************************
typedef struct _AT91S_SPI {
AT91S_REG SPI_CR; // Control Register
AT91S_REG SPI_MR; // Mode Register
AT91S_REG SPI_RDR; // Receive Data Register
AT91S_REG SPI_TDR; // Transmit Data Register
AT91S_REG SPI_SR; // Status Register
AT91S_REG SPI_IER; // Interrupt Enable Register
AT91S_REG SPI_IDR; // Interrupt Disable Register
AT91S_REG SPI_IMR; // Interrupt Mask Register
AT91S_REG Reserved0[4]; //
AT91S_REG SPI_CSR[4]; // Chip Select Register
AT91S_REG Reserved1[48]; //
AT91S_REG SPI_RPR; // Receive Pointer Register
AT91S_REG SPI_RCR; // Receive Counter Register
AT91S_REG SPI_TPR; // Transmit Pointer Register
AT91S_REG SPI_TCR; // Transmit Counter Register
AT91S_REG SPI_RNPR; // Receive Next Pointer Register
AT91S_REG SPI_RNCR; // Receive Next Counter Register
AT91S_REG SPI_TNPR; // Transmit Next Pointer Register
AT91S_REG SPI_TNCR; // Transmit Next Counter Register
AT91S_REG SPI_PTCR; // PDC Transfer Control Register
AT91S_REG SPI_PTSR; // PDC Transfer Status Register
} AT91S_SPI, *AT91PS_SPI;
static AT91PS_SPI pSPI = ((AT91PS_SPI) 0xFFFE0000);
// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register --------
#define AT91C_SPI_SPIEN ((unsigned int) 0x1 << 0) // (SPI) SPI Enable
#define AT91C_SPI_SPIDIS ((unsigned int) 0x1 << 1) // (SPI) SPI Disable
#define AT91C_SPI_SWRST ((unsigned int) 0x1 << 7) // (SPI) SPI Software reset
#define AT91C_SPI_LASTXFER ((unsigned int) 0x1 << 24) // (SPI) SPI Last Transfer
// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register --------
#define AT91C_SPI_MSTR ((unsigned int) 0x1 << 0) // (SPI) Master/Slave Mode
#define AT91C_SPI_PS ((unsigned int) 0x1 << 1) // (SPI) Peripheral Select
#define AT91C_SPI_PS_FIXED ((unsigned int) 0x0 << 1) // (SPI) Fixed Peripheral Select
#define AT91C_SPI_PS_VARIABLE ((unsigned int) 0x1 << 1) // (SPI) Variable Peripheral Select
#define AT91C_SPI_PCSDEC ((unsigned int) 0x1 << 2) // (SPI) Chip Select Decode
#define AT91C_SPI_FDIV ((unsigned int) 0x1 << 3) // (SPI) Clock Selection
#define AT91C_SPI_MODFDIS ((unsigned int) 0x1 << 4) // (SPI) Mode Fault Detection
#define AT91C_SPI_LLB ((unsigned int) 0x1 << 7) // (SPI) Clock Selection
#define AT91C_SPI_PCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select
#define AT91C_SPI_DLYBCS ((unsigned int) 0xFF << 24) // (SPI) Delay Between Chip Selects
// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register --------
#define AT91C_SPI_RD ((unsigned int) 0xFFFF << 0) // (SPI) Receive Data
#define AT91C_SPI_RPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status
// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register --------
#define AT91C_SPI_TD ((unsigned int) 0xFFFF << 0) // (SPI) Transmit Data
#define AT91C_SPI_TPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status
// -------- SPI_SR : (SPI Offset: 0x10) Status Register --------
#define AT91C_SPI_RDRF ((unsigned int) 0x1 << 0) // (SPI) Receive Data Register Full
#define AT91C_SPI_TDRE ((unsigned int) 0x1 << 1) // (SPI) Transmit Data Register Empty
#define AT91C_SPI_MODF ((unsigned int) 0x1 << 2) // (SPI) Mode Fault Error
#define AT91C_SPI_OVRES ((unsigned int) 0x1 << 3) // (SPI) Overrun Error Status
#define AT91C_SPI_ENDRX ((unsigned int) 0x1 << 4) // (SPI) End of Receiver Transfer
#define AT91C_SPI_ENDTX ((unsigned int) 0x1 << 5) // (SPI) End of Receiver Transfer
#define AT91C_SPI_RXBUFF ((unsigned int) 0x1 << 6) // (SPI) RXBUFF Interrupt
#define AT91C_SPI_TXBUFE ((unsigned int) 0x1 << 7) // (SPI) TXBUFE Interrupt
#define AT91C_SPI_NSSR ((unsigned int) 0x1 << 8) // (SPI) NSSR Interrupt
#define AT91C_SPI_TXEMPTY ((unsigned int) 0x1 << 9) // (SPI) TXEMPTY Interrupt
#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) // (SPI) Enable Status
// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register --------
// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register --------
// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register --------
// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register --------
#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) // (SPI) Clock Polarity
#define AT91C_SPI_NCPHA ((unsigned int) 0x1 << 1) // (SPI) Clock Phase
#define AT91C_SPI_CSAAT ((unsigned int) 0x1 << 3) // (SPI) Chip Select Active After Transfer
#define AT91C_SPI_BITS ((unsigned int) 0xF << 4) // (SPI) Bits Per Transfer
#define AT91C_SPI_BITS_8 ((unsigned int) 0x0 << 4) // (SPI) 8 Bits Per transfer
#define AT91C_SPI_BITS_9 ((unsigned int) 0x1 << 4) // (SPI) 9 Bits Per transfer
#define AT91C_SPI_BITS_10 ((unsigned int) 0x2 << 4) // (SPI) 10 Bits Per transfer
#define AT91C_SPI_BITS_11 ((unsigned int) 0x3 << 4) // (SPI) 11 Bits Per transfer
#define AT91C_SPI_BITS_12 ((unsigned int) 0x4 << 4) // (SPI) 12 Bits Per transfer
#define AT91C_SPI_BITS_13 ((unsigned int) 0x5 << 4) // (SPI) 13 Bits Per transfer
#define AT91C_SPI_BITS_14 ((unsigned int) 0x6 << 4) // (SPI) 14 Bits Per transfer
#define AT91C_SPI_BITS_15 ((unsigned int) 0x7 << 4) // (SPI) 15 Bits Per transfer
#define AT91C_SPI_BITS_16 ((unsigned int) 0x8 << 4) // (SPI) 16 Bits Per transfer
#define AT91C_SPI_SCBR ((unsigned int) 0xFF << 8) // (SPI) Serial Clock Baud Rate
#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) // (SPI) Delay Before SPCK
#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) // (SPI) Delay Between Consecutive Transfers
#define CARD_SELECT_PIN AT91C_PA13_SPI0_NPCS1
#define SPI_CSR_NUM 0
#define SPI_SCBR_MIN 2
/* MMC/SD command (in SPI) */
#define CMD0 (0x40+0) /* GO_IDLE_STATE */
#define CMD1 (0x40+1) /* SEND_OP_COND */
#define CMD9 (0x40+9) /* SEND_CSD */
#define CMD10 (0x40+10) /* SEND_CID */
#define CMD12 (0x40+12) /* STOP_TRANSMISSION */
#define CMD17 (0x40+17) /* READ_SINGLE_BLOCK */
#define CMD18 (0x40+18) /* READ_MULTIPLE_BLOCK */
#define CMD24 (0x40+24) /* WRITE_BLOCK */
#define CMD25 (0x40+25) /* WRITE_MULTIPLE_BLOCK */
#define CMD58 (0x40+58) /* READ_OCR */
/* Control signals (Platform dependent) */
#define SELECT() (AT91C_PIOA_CODR = CARD_SELECT_PIN) /* MMC CS = L */
#define DESELECT() (AT91C_PIOA_SODR = CARD_SELECT_PIN) /* MMC CS = H */
#define SOCKWP CARD_WP_PIN /* Write protect switch (PB5) */
#define SOCKINS CARD_INS_PIN /* Card detect switch (PB4) */
#define POWER_ON() (AT91C_PIOA_CODR = CARD_PWR_PIN)
#define POWER_OFF() (AT91C_PIOA_SODR = CARD_PWR_PIN)
static struct rt_device sd;
static struct dfs_partition part;
static void AT91_spiSetSpeed(rt_uint8_t speed)
{
rt_uint32_t reg;
if ( speed < SPI_SCBR_MIN ) speed = SPI_SCBR_MIN;
if ( speed > 1 ) speed &= 0xFE;
reg = pSPI->SPI_CSR[SPI_CSR_NUM];
reg = ( reg & ~(AT91C_SPI_SCBR) ) | ( (rt_uint32_t)speed << 8 );
pSPI->SPI_CSR[SPI_CSR_NUM] = reg;
}
static rt_uint8_t AT91_spi(rt_uint8_t outgoing)
{
rt_uint8_t incoming;
while( !( pSPI->SPI_SR & AT91C_SPI_TDRE ) ); // transfer compl. wait
pSPI->SPI_TDR = (rt_uint16_t)( outgoing );
while( !( pSPI->SPI_SR & AT91C_SPI_RDRF ) ); // wait for char
incoming = (rt_uint8_t)( pSPI->SPI_RDR );
return incoming;
}
/*--------------------------------*/
/* Transmit a rt_uint8_t to MMC via SPI */
/* (Platform dependent) */
rt_inline void xmit_spi(rt_uint8_t dat)
{
AT91_spi(dat);
}
/*---------------------------------*/
/* Receive a rt_uint8_t from MMC via SPI */
/* (Platform dependent) */
rt_inline rt_uint8_t rcvr_spi(void)
{
return AT91_spi(0xff);
}
/* Alternative "macro" (not at AT91 so far) to receive data fast */
static void rcvr_spi_m(rt_uint8_t *dst)
{
*dst = rcvr_spi();
}
/*---------------------*/
/* Wait for card ready */
static rt_uint8_t wait_ready ()
{
rt_uint8_t res;
rcvr_spi();
do
{
res = rcvr_spi();
} while ((res != 0xFF));
return res;
}
/*--------------------------------*/
/* Receive a data packet from MMC */
rt_bool_t rcvr_datablock (rt_uint8_t *buff, rt_uint8_t wc)
{
rt_uint8_t token;
{
/* Wait for data packet in timeout of 100ms */
token = rcvr_spi();
}while ((token == 0xFF));
if(token != 0xFE) return RT_FALSE; /* If not valid data token, retutn with error */
do
{
/* Receive the data block into buffer */
rcvr_spi_m(buff++);
rcvr_spi_m(buff++);
} while (--wc);
rcvr_spi(); /* Discard CRC */
rcvr_spi();
return RT_TRUE; /* Return with success */
}
/*---------------------------*/
/* Send a data packet to MMC */
static rt_bool_t xmit_datablock(const rt_uint8_t *buff, rt_uint8_t token)
{
rt_uint8_t resp, wc = 0;
if (wait_ready() != 0xFF) return RT_FALSE;
xmit_spi(token); /* Xmit data token */
if (token != 0xFD)
{ /* Is data token */
do
{
/* Xmit the 512 rt_uint8_t data block to MMC */
xmit_spi(*buff++);
xmit_spi(*buff++);
} while (--wc);
xmit_spi(0xFF); /* CRC (Dummy) */
xmit_spi(0xFF);
resp = rcvr_spi(); /* Reveive data response */
if ((resp & 0x1F) != 0x05) /* If not accepted, return with error */
return RT_FALSE;
}
return RT_TRUE;
}
/*------------------------------*/
/* Send a command packet to MMC */
rt_uint8_t send_cmd (rt_uint8_t cmd, rt_uint32_t arg)
{
rt_uint8_t n, res;
if (wait_ready() != 0xFF) return 0xFF;
/* Send command packet */
xmit_spi(cmd); /* Command */
xmit_spi((rt_uint8_t)(arg >> 24)); /* Argument[31..24] */
xmit_spi((rt_uint8_t)(arg >> 16)); /* Argument[23..16] */
xmit_spi((rt_uint8_t)(arg >> 8)); /* Argument[15..8] */
xmit_spi((rt_uint8_t)arg); /* Argument[7..0] */
xmit_spi(0x95); /* CRC (valid for only CMD0) */
/* Receive command response */
if (cmd == CMD12) rcvr_spi(); /* Skip a stuff rt_uint8_t when stop reading */
n = 10; /* Wait for a valid response in timeout of 10 attempts */
do
{
res = rcvr_spi();
}
while ((res & 0x80) && --n);
return res; /* Return with the response value */
}
static rt_err_t rt_sdcard_init(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t rt_sdcard_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t rt_sdcard_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_ssize_t rt_sdcard_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_uint8_t count;
count = size / 512;
/* CS = L */
SELECT();
/* append partition offset */
pos += part.offset * 512;
if (count == 1)
{ /* Single block read */
if ((send_cmd(CMD17, pos) == 0) /* READ_SINGLE_BLOCK */
&& rcvr_datablock(buffer, (rt_uint8_t)(512/2)))
count = 0;
else
count = 1;
}
else
{ /* Multiple block read */
if (send_cmd(CMD18, pos) == 0)
{
rt_uint8_t* ptr;
ptr = buffer;
do
{
if (!rcvr_datablock(ptr, (rt_uint8_t)(512/2))) break;
ptr += 512;
} while (--count);
send_cmd(CMD12, 0); /* STOP_TRANSMISSION */
}
}
DESELECT(); /* CS = H */
rcvr_spi(); /* Idle (Release DO) */
if (count)
{
// rt_set_errno(-RT_ERROR);
return 0;
}
return size / 512;
}
static rt_ssize_t rt_sdcard_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_uint8_t count;
count = size / 512;
/* CS = L */
SELECT();
/* append partition offset */
pos += part.offset * 512;
if (count == 1)
{
/* Single block write */
if ((send_cmd(CMD24, pos) == 0) /* WRITE_BLOCK */
&& xmit_datablock(buffer, 0xFE))
count = 0;
else
count = 1;
}
else
{
/* Multiple block write */
if (send_cmd(CMD25, pos) == 0)
{
rt_uint8_t *ptr;
ptr = (rt_uint8_t *)buffer;
do
{
if (!xmit_datablock(ptr, 0xFC)) break;
ptr += 512;
} while (--count);
if (!xmit_datablock(0, 0xFD)) /* STOP_TRAN token */
count = 1;
}
}
DESELECT(); /* CS = H */
rcvr_spi(); /* Idle (Release DO) */
if (count)
{
rt_set_errno(-RT_ERROR);
return 0;
}
return size;
}
static rt_err_t rt_sdcard_control(rt_device_t dev, int cmd, void *args)
{
return RT_EOK;
}
void rt_hw_sdcard_init()
{
rt_uint32_t n;
rt_uint8_t* sector;
sd.type = RT_Device_Class_Block;
sd.init = rt_sdcard_init;
sd.open = rt_sdcard_open;
sd.close = rt_sdcard_close;
sd.read = rt_sdcard_read;
sd.write = rt_sdcard_write;
sd.control = rt_sdcard_control;
sd.user_data = RT_NULL;
AT91C_PIOA_PER = CARD_PWR_PIN; // enable GPIO of CS-pin
AT91C_PIOA_CODR = CARD_PWR_PIN; // set high
AT91C_PIOA_OER = CARD_PWR_PIN; // output enable
for (n = 0; n < 3000; n ++) ;
// disable PIO from controlling MOSI, MISO, SCK (=hand over to SPI)
// keep CS untouched - used as GPIO pin during init
AT91C_PIOA_PDR = AT91C_PA16_SPI0_MISO | AT91C_PA17_SPI0_MOSI | AT91C_PA18_SPI0_SPCK; // | NCPS_PDR_BIT;
// set pin-functions in PIO Controller
AT91C_PIOA_ASR = AT91C_PA16_SPI0_MISO | AT91C_PA17_SPI0_MOSI | AT91C_PA18_SPI0_SPCK; /// not here: | NCPS_ASR_BIT;
// set chip-select as output high (unselect card)
AT91C_PIOA_PER = CARD_SELECT_PIN; // enable GPIO of CS-pin
AT91C_PIOA_SODR = CARD_SELECT_PIN; // set high
AT91C_PIOA_OER = CARD_SELECT_PIN; // output enable
// enable peripheral clock for SPI ( PID Bit 5 )
AT91C_PMC_PCER = ( (rt_uint32_t) 1 << AT91C_ID_SPI0 ); // n.b. IDs are just bit-numbers
// SPI enable and reset
pSPI->SPI_CR = AT91C_SPI_SPIEN | AT91C_SPI_SWRST;
// SPI mode: master, FDIV=0, fault detection disabled
pSPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS;
// set chip-select-register
// 8 bits per transfer, CPOL=1, ClockPhase=0, DLYBCT = 0
pSPI->SPI_CSR[SPI_CSR_NUM] = AT91C_SPI_CPOL | AT91C_SPI_BITS_8;
// slow during init
AT91_spiSetSpeed(0xFE);
// enable
pSPI->SPI_CR = AT91C_SPI_SPIEN;
n = 10; /* Dummy clock */
do
{
rcvr_spi();
} while (--n);
SELECT(); /* CS = L */
if (send_cmd(CMD0, 0) == 1)
{
/* Enter Idle state */
while (send_cmd(CMD1, 0));
}
DESELECT(); /* CS = H */
rcvr_spi(); /* Idle (Release DO) */
AT91_spiSetSpeed(SPI_SCBR_MIN);
/* get the first sector to read partition table */
sector = (rt_uint8_t*) rt_malloc (512);
if (sector == RT_NULL)
{
rt_kprintf("allocate partition sector buffer failed\n");
return;
}
n = rt_sdcard_read((rt_device_t)&sd, 0, sector, 512);
if (n == 512)
{
rt_err_t status;
/* get the first partition */
status = dfs_filesystem_get_partition(&part, sector, 0);
if (status != RT_EOK)
{
/* there is no partition table */
part.offset = 0;
part.size = 0;
}
}
else
{
/* there is no partition table */
part.offset = 0;
part.size = 0;
}
/* release sector buffer */
rt_free(sector);
/* register sd device */
rt_device_register(&sd, "sd", RT_DEVICE_FLAG_RDWR);
}
View Git Blame Copy Permalink