libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/swm320-lq100/Libraries/SWM320_StdPeriph_Driver/SWM320_sdio.c

437 lines
16 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/******************************************************************************************************************************************
* 文件名称: SWM320_sdio.c
* 功能说明: SWM320单片机的SDIO接口驱动库
* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1
* 注意事项: 为了通用性、兼容性、易用性，只支持以512字节为单位的读写
* 版本日期: V1.1.0 2017年10月25日
* 升级记录:
*
*
*******************************************************************************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION
* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE
* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN-
* -ECTION WITH THEIR PRODUCTS.
*
* COPYRIGHT 2012 Synwit Technology
*******************************************************************************************************************************************/
#include "SWM320.h"
#include "SWM320_sdio.h"
SD_CardInfo SD_cardInfo;
/******************************************************************************************************************************************
* 函数名称: SDIO_Init()
* 功能说明: SDIO读写SD卡初始化，初始化成高速4线模式、读写以512字节大小进行
* 输 入: 无
* 输 出: 无
* 注意事项: 无
******************************************************************************************************************************************/
uint32_t SDIO_Init(void)
{
uint32_t resp, resps[4];
SYS->CLKDIV &= ~SYS_CLKDIV_SDIO_Msk;
if (SystemCoreClock > 80000000) //SDIO时钟需要小于52MHz
SYS->CLKDIV |= (2 << SYS_CLKDIV_SDIO_Pos); //SDCLK = SYSCLK / 4
else
SYS->CLKDIV |= (1 << SYS_CLKDIV_SDIO_Pos); //SDCLK = SYSCLK / 2
SYS->CLKEN |= (0x01 << SYS_CLKEN_SDIO_Pos);
SDIO->CR2 = (1 << SDIO_CR2_RSTALL_Pos);
SDIO->CR1 = (1 << SDIO_CR1_CDSRC_Pos) |
(0 << SDIO_CR1_8BIT_Pos) |
(0 << SDIO_CR1_4BIT_Pos) |
(1 << SDIO_CR1_PWRON_Pos) |
(7 << SDIO_CR1_VOLT_Pos);
SDIO->CR2 = (1 << SDIO_CR2_CLKEN_Pos) |
(1 << SDIO_CR2_SDCLKEN_Pos) |
(calcSDCLKDiv(SD_CLK_400KHz) << SDIO_CR2_SDCLKDIV_Pos) |
(0xC << SDIO_CR2_TIMEOUT_Pos);
while ((SDIO->CR2 & SDIO_CR2_CLKRDY_Msk) == 0);
SDIO->IE = 0xFFFF01FF;
SDIO->IM = 0x00FF00FF;
SDIO_SendCmd(SD_CMD_GO_IDLE_STATE, 0x00, SD_RESP_NO, 0, 0, 0); //CMD0: GO_IDLE_STATE
SDIO_SendCmd(SD_CMD_SEND_IF_COND, 0x1AA, SD_RESP_32b, &resp, 0, 0); //CMD8: SEND_IF_COND, 检测工作电压、检测是否支持SD 2.0
if (resp == 0x1AA) SD_cardInfo.CardType = SDIO_STD_CAPACITY_SD_CARD_V2_0;
else SD_cardInfo.CardType = SDIO_STD_CAPACITY_SD_CARD_V1_1;
do //ACMD41: SD_CMD_SD_APP_OP_COND
{
SDIO_SendCmd(SD_CMD_APP_CMD, 0x00, SD_RESP_32b, &resp, 0, 0);
if (resp != 0x120) return SD_RES_ERR; //不是SD卡，可能是MMC卡
if (SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V2_0)
SDIO_SendCmd(SD_CMD_SD_APP_OP_COND, 0x80100000 | 0x40000000, SD_RESP_32b, &resp, 0, 0);
else
SDIO_SendCmd(SD_CMD_SD_APP_OP_COND, 0x80100000 | 0x00000000, SD_RESP_32b, &resp, 0, 0);
}
while (((resp >> 31) & 0x01) == 0); //上电没完成时resp[31] == 0
if (((resp >> 30) & 0x01) == 1) SD_cardInfo.CardType = SDIO_HIGH_CAPACITY_SD_CARD;
SDIO_SendCmd(SD_CMD_ALL_SEND_CID, 0x00, SD_RESP_128b, resps, 0, 0); //CMD2: SD_CMD_ALL_SEND_CID，获取CID
parseCID(resps);
SDIO_SendCmd(SD_CMD_SET_REL_ADDR, 0x00, SD_RESP_32b, &resp, 0, 0); //CMD3: SD_CMD_SET_REL_ADDR，设置RCA
SD_cardInfo.RCA = resp >> 16;
SDIO_SendCmd(SD_CMD_SEND_CSD, SD_cardInfo.RCA << 16, SD_RESP_128b, resps, 0, 0); //CMD9: SD_CMD_SEND_CSD，获取CSD
parseCSD(resps);
if (SD_cardInfo.CardBlockSize < 0x200) return SD_RES_ERR; //本驱动只支持以512字节为单位的读写，所以最大读写单位必须不小于512
SDIO->CR2 &= ~(SDIO_CR2_SDCLKEN_Msk | SDIO_CR2_SDCLKDIV_Msk);
SDIO->CR2 |= (1 << SDIO_CR2_SDCLKEN_Pos) |
(calcSDCLKDiv(SD_CLK_20MHz) << SDIO_CR2_SDCLKDIV_Pos); //初始化完成，SDCLK切换到高速
SDIO_SendCmd(SD_CMD_SEL_DESEL_CARD, SD_cardInfo.RCA << 16, SD_RESP_32b_busy, &resp, 0, 0); //CMD7: 选中卡，从Standy模式进入Transfer模式
SDIO_SendCmd(SD_CMD_APP_CMD, SD_cardInfo.RCA << 16, SD_RESP_32b, &resp, 0, 0);
SDIO_SendCmd(SD_CMD_APP_SD_SET_BUSWIDTH, SD_BUSWIDTH_4b, SD_RESP_32b, &resp, 0, 0); //切换成4位总线模式
SDIO->CR1 |= (1 << SDIO_CR1_4BIT_Pos);
SDIO_SendCmd(SD_CMD_SET_BLOCKLEN, 512, SD_RESP_32b, &resp, 0, 0); //固定块大小位512字节
SDIO->BLK = 512;
return SD_RES_OK;
}
/******************************************************************************************************************************************
* 函数名称: SDIO_BlockWrite()
* 功能说明: 向SD卡写入数据
* 输 入: uint32_t block_addr SD卡块地址，每块512字节
* uint32_t buff[] 要写入的数据
* 输 出: 无
* 注意事项: 无
******************************************************************************************************************************************/
void SDIO_BlockWrite(uint32_t block_addr, uint32_t buff[])
{
uint32_t i, resp, addr;
if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) addr = block_addr;
else addr = block_addr * 512;
SDIO_SendCmd(SD_CMD_WRITE_SINGLE_BLOCK, addr, SD_RESP_32b, &resp, 1, 0);
while ((SDIO->IF & SDIO_IF_BUFWRRDY_Msk) == 0);
SDIO->IF = SDIO_IF_BUFWRRDY_Msk;
for (i = 0; i < 512 / 4; i++) SDIO->DATA = buff[i];
SDIO->IF = SDIO_IF_TRXDONE_Msk; //?? 这个必须有
while ((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0);
SDIO->IF = SDIO_IF_TRXDONE_Msk;
}
/******************************************************************************************************************************************
* 函数名称: SDIO_BlockRead()
* 功能说明: 从SD卡读出数据
* 输 入: uint32_t block_addr SD卡块地址，每块512字节
* uint32_t buff[] 读出的数据
* 输 出: 无
* 注意事项: 无
******************************************************************************************************************************************/
void SDIO_BlockRead(uint32_t block_addr, uint32_t buff[])
{
uint32_t i, resp, addr;
if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) addr = block_addr;
else addr = block_addr * 512;
SDIO_SendCmd(SD_CMD_READ_SINGLE_BLOCK, addr, SD_RESP_32b, &resp, 1, 1);
while ((SDIO->IF & SDIO_IF_BUFRDRDY_Msk) == 0);
SDIO->IF = SDIO_IF_BUFRDRDY_Msk;
for (i = 0; i < 512 / 4; i++) buff[i] = SDIO->DATA;
while ((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0);
SDIO->IF = SDIO_IF_TRXDONE_Msk;
}
/******************************************************************************************************************************************
* 函数名称: SDIO_SendCmd()
* 功能说明: SDIO向SD卡发送命令
* 输 入: uint32_t cmd 命令索引
* uint32_t arg 命令参数
* uint32_t resp_type 响应类型，取值SD_RESP_NO、SD_RESP_32b、SD_RESP_128b、SD_RESP_32b_busy
* uint32_t *resp_data 响应内容
* uint32_t have_data 是否有数据传输
* uint32_t data_read 1 读SD卡 0 写SD卡
* 输 出: 无
* 注意事项: 无
******************************************************************************************************************************************/
void SDIO_SendCmd(uint32_t cmd, uint32_t arg, uint32_t resp_type, uint32_t *resp_data, uint32_t have_data, uint32_t data_read)
{
SDIO->ARG = arg;
SDIO->CMD = (cmd << SDIO_CMD_CMDINDX_Pos) |
(0 << SDIO_CMD_CMDTYPE_Pos) |
(have_data << SDIO_CMD_HAVEDATA_Pos) |
(0 << SDIO_CMD_IDXCHECK_Pos) |
(0 << SDIO_CMD_CRCCHECK_Pos) |
(resp_type << SDIO_CMD_RESPTYPE_Pos) |
(0 << SDIO_CMD_MULTBLK_Pos) |
(data_read << SDIO_CMD_DIRREAD_Pos) |
(0 << SDIO_CMD_BLKCNTEN_Pos);
while ((SDIO->IF & SDIO_IF_CMDDONE_Msk) == 0);
SDIO->IF = SDIO_IF_CMDDONE_Msk;
if (resp_type == SD_RESP_32b)
{
resp_data[0] = SDIO->RESP[0];
}
else if (resp_type == SD_RESP_128b)
{
//寄存器中将CID/CSD[127-8]依次存放在了RESP3-0[119-0]，最低位的CRC被丢掉
//读出数据时调整了顺序，将CID/CSD[127-8]存放在resp_data0-3[127-8]，最低8位填充0x00
resp_data[0] = (SDIO->RESP[3] << 8) + ((SDIO->RESP[2] >> 24) & 0xFF);
resp_data[1] = (SDIO->RESP[2] << 8) + ((SDIO->RESP[1] >> 24) & 0xFF);
resp_data[2] = (SDIO->RESP[1] << 8) + ((SDIO->RESP[0] >> 24) & 0xFF);
resp_data[3] = (SDIO->RESP[0] << 8) + 0x00;
}
}
void parseCID(uint32_t CID_Tab[4])
{
uint8_t tmp = 0;
/*!< Byte 0 */
tmp = (uint8_t)((CID_Tab[0] & 0xFF000000) >> 24);
SD_cardInfo.SD_cid.ManufacturerID = tmp;
/*!< Byte 1 */
tmp = (uint8_t)((CID_Tab[0] & 0x00FF0000) >> 16);
SD_cardInfo.SD_cid.OEM_AppliID = tmp << 8;
/*!< Byte 2 */
tmp = (uint8_t)((CID_Tab[0] & 0x000000FF00) >> 8);
SD_cardInfo.SD_cid.OEM_AppliID |= tmp;
/*!< Byte 3 */
tmp = (uint8_t)(CID_Tab[0] & 0x000000FF);
SD_cardInfo.SD_cid.ProdName1 = tmp << 24;
/*!< Byte 4 */
tmp = (uint8_t)((CID_Tab[1] & 0xFF000000) >> 24);
SD_cardInfo.SD_cid.ProdName1 |= tmp << 16;
/*!< Byte 5 */
tmp = (uint8_t)((CID_Tab[1] & 0x00FF0000) >> 16);
SD_cardInfo.SD_cid.ProdName1 |= tmp << 8;
/*!< Byte 6 */
tmp = (uint8_t)((CID_Tab[1] & 0x0000FF00) >> 8);
SD_cardInfo.SD_cid.ProdName1 |= tmp;
/*!< Byte 7 */
tmp = (uint8_t)(CID_Tab[1] & 0x000000FF);
SD_cardInfo.SD_cid.ProdName2 = tmp;
/*!< Byte 8 */
tmp = (uint8_t)((CID_Tab[2] & 0xFF000000) >> 24);
SD_cardInfo.SD_cid.ProdRev = tmp;
/*!< Byte 9 */
tmp = (uint8_t)((CID_Tab[2] & 0x00FF0000) >> 16);
SD_cardInfo.SD_cid.ProdSN = tmp << 24;
/*!< Byte 10 */
tmp = (uint8_t)((CID_Tab[2] & 0x0000FF00) >> 8);
SD_cardInfo.SD_cid.ProdSN |= tmp << 16;
/*!< Byte 11 */
tmp = (uint8_t)(CID_Tab[2] & 0x000000FF);
SD_cardInfo.SD_cid.ProdSN |= tmp << 8;
/*!< Byte 12 */
tmp = (uint8_t)((CID_Tab[3] & 0xFF000000) >> 24);
SD_cardInfo.SD_cid.ProdSN |= tmp;
/*!< Byte 13 */
tmp = (uint8_t)((CID_Tab[3] & 0x00FF0000) >> 16);
SD_cardInfo.SD_cid.Reserved1 |= (tmp & 0xF0) >> 4;
SD_cardInfo.SD_cid.ManufactDate = (tmp & 0x0F) << 8;
/*!< Byte 14 */
tmp = (uint8_t)((CID_Tab[3] & 0x0000FF00) >> 8);
SD_cardInfo.SD_cid.ManufactDate |= tmp;
}
void parseCSD(uint32_t CSD_Tab[4])
{
uint8_t tmp = 0;
/*!< Byte 0 */
tmp = (uint8_t)((CSD_Tab[0] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.CSDStruct = (tmp & 0xC0) >> 6;
SD_cardInfo.SD_csd.SysSpecVersion = (tmp & 0x3C) >> 2;
SD_cardInfo.SD_csd.Reserved1 = tmp & 0x03;
/*!< Byte 1 */
tmp = (uint8_t)((CSD_Tab[0] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.TAAC = tmp;
/*!< Byte 2 */
tmp = (uint8_t)((CSD_Tab[0] & 0x0000FF00) >> 8);
SD_cardInfo.SD_csd.NSAC = tmp;
/*!< Byte 3 */
tmp = (uint8_t)(CSD_Tab[0] & 0x000000FF);
SD_cardInfo.SD_csd.MaxBusClkFrec = tmp;
/*!< Byte 4 */
tmp = (uint8_t)((CSD_Tab[1] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.CardComdClasses = tmp << 4;
/*!< Byte 5 */
tmp = (uint8_t)((CSD_Tab[1] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.CardComdClasses |= (tmp & 0xF0) >> 4;
SD_cardInfo.SD_csd.RdBlockLen = tmp & 0x0F;
/*!< Byte 6 */
tmp = (uint8_t)((CSD_Tab[1] & 0x0000FF00) >> 8);
SD_cardInfo.SD_csd.PartBlockRead = (tmp & 0x80) >> 7;
SD_cardInfo.SD_csd.WrBlockMisalign = (tmp & 0x40) >> 6;
SD_cardInfo.SD_csd.RdBlockMisalign = (tmp & 0x20) >> 5;
SD_cardInfo.SD_csd.DSRImpl = (tmp & 0x10) >> 4;
SD_cardInfo.SD_csd.Reserved2 = 0; /*!< Reserved */
if ((SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V1_1) ||
(SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V2_0))
{
SD_cardInfo.SD_csd.DeviceSize = (tmp & 0x03) << 10;
/*!< Byte 7 */
tmp = (uint8_t)(CSD_Tab[1] & 0x000000FF);
SD_cardInfo.SD_csd.DeviceSize |= (tmp) << 2;
/*!< Byte 8 */
tmp = (uint8_t)((CSD_Tab[2] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.DeviceSize |= (tmp & 0xC0) >> 6;
SD_cardInfo.SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3;
SD_cardInfo.SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07);
/*!< Byte 9 */
tmp = (uint8_t)((CSD_Tab[2] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5;
SD_cardInfo.SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2;
SD_cardInfo.SD_csd.DeviceSizeMul = (tmp & 0x03) << 1;
/*!< Byte 10 */
tmp = (uint8_t)((CSD_Tab[2] & 0x0000FF00) >> 8);
SD_cardInfo.SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7;
SD_cardInfo.CardCapacity = (SD_cardInfo.SD_csd.DeviceSize + 1) ;
SD_cardInfo.CardCapacity *= (1 << (SD_cardInfo.SD_csd.DeviceSizeMul + 2));
SD_cardInfo.CardBlockSize = 1 << (SD_cardInfo.SD_csd.RdBlockLen);
SD_cardInfo.CardCapacity *= SD_cardInfo.CardBlockSize;
}
else if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD)
{
/*!< Byte 7 */
tmp = (uint8_t)(CSD_Tab[1] & 0x000000FF);
SD_cardInfo.SD_csd.DeviceSize = (tmp & 0x3F) << 16;
/*!< Byte 8 */
tmp = (uint8_t)((CSD_Tab[2] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.DeviceSize |= (tmp << 8);
/*!< Byte 9 */
tmp = (uint8_t)((CSD_Tab[2] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.DeviceSize |= (tmp);
/*!< Byte 10 */
tmp = (uint8_t)((CSD_Tab[2] & 0x0000FF00) >> 8);
SD_cardInfo.CardCapacity = (SD_cardInfo.SD_csd.DeviceSize + 1) * 512 * 1024;
SD_cardInfo.CardBlockSize = 512;
}
SD_cardInfo.SD_csd.EraseGrSize = (tmp & 0x40) >> 6;
SD_cardInfo.SD_csd.EraseGrMul = (tmp & 0x3F) << 1;
/*!< Byte 11 */
tmp = (uint8_t)(CSD_Tab[2] & 0x000000FF);
SD_cardInfo.SD_csd.EraseGrMul |= (tmp & 0x80) >> 7;
SD_cardInfo.SD_csd.WrProtectGrSize = (tmp & 0x7F);
/*!< Byte 12 */
tmp = (uint8_t)((CSD_Tab[3] & 0xFF000000) >> 24);
SD_cardInfo.SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7;
SD_cardInfo.SD_csd.ManDeflECC = (tmp & 0x60) >> 5;
SD_cardInfo.SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2;
SD_cardInfo.SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2;
/*!< Byte 13 */
tmp = (uint8_t)((CSD_Tab[3] & 0x00FF0000) >> 16);
SD_cardInfo.SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6;
SD_cardInfo.SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5;
SD_cardInfo.SD_csd.Reserved3 = 0;
SD_cardInfo.SD_csd.ContentProtectAppli = (tmp & 0x01);
/*!< Byte 14 */
tmp = (uint8_t)((CSD_Tab[3] & 0x0000FF00) >> 8);
SD_cardInfo.SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7;
SD_cardInfo.SD_csd.CopyFlag = (tmp & 0x40) >> 6;
SD_cardInfo.SD_csd.PermWrProtect = (tmp & 0x20) >> 5;
SD_cardInfo.SD_csd.TempWrProtect = (tmp & 0x10) >> 4;
SD_cardInfo.SD_csd.FileFormat = (tmp & 0x0C) >> 2;
SD_cardInfo.SD_csd.ECC = (tmp & 0x03);
}
uint32_t calcSDCLKDiv(uint32_t freq_sel)
{
uint32_t regdiv = 0;
uint32_t clkdiv = 0;
if (((SYS->CLKDIV & SYS_CLKDIV_SDIO_Msk) >> SYS_CLKDIV_SDIO_Pos) == 1)
clkdiv = SystemCoreClock / 2 / ((freq_sel == SD_CLK_400KHz) ? 300000 : 15000000);
else if (((SYS->CLKDIV & SYS_CLKDIV_SDIO_Msk) >> SYS_CLKDIV_SDIO_Pos) == 2)
clkdiv = SystemCoreClock / 4 / ((freq_sel == SD_CLK_400KHz) ? 300000 : 15000000);
if (clkdiv > 128) regdiv = 0x80;
else if (clkdiv > 64) regdiv = 0x40;
else if (clkdiv > 32) regdiv = 0x20;
else if (clkdiv > 16) regdiv = 0x10;
else if (clkdiv > 8) regdiv = 0x08;
else if (clkdiv > 4) regdiv = 0x04;
else if (clkdiv > 2) regdiv = 0x02;
else if (clkdiv > 1) regdiv = 0x01;
else regdiv = 0x00;
return regdiv;
}
View Git Blame Copy Permalink