308 lines
7.6 KiB
C
308 lines
7.6 KiB
C
/**************************************************************************//**
|
|
*
|
|
* @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2020-12-12 Wayne First version
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include <rtconfig.h>
|
|
#include <rtdevice.h>
|
|
|
|
#if defined(BOARD_USING_STORAGE_SPIFLASH)
|
|
#if defined(RT_USING_SFUD)
|
|
#include "spi_flash.h"
|
|
#include "spi_flash_sfud.h"
|
|
#endif
|
|
|
|
#include "drv_qspi.h"
|
|
|
|
#define W25X_REG_READSTATUS (0x05)
|
|
#define W25X_REG_READSTATUS2 (0x35)
|
|
#define W25X_REG_WRITEENABLE (0x06)
|
|
#define W25X_REG_WRITESTATUS (0x01)
|
|
#define W25X_REG_QUADENABLE (0x02)
|
|
|
|
static rt_uint8_t SpiFlash_ReadStatusReg(struct rt_qspi_device *qspi_device)
|
|
{
|
|
rt_uint8_t u8Val;
|
|
rt_err_t result = RT_EOK;
|
|
rt_uint8_t w25x_txCMD1 = W25X_REG_READSTATUS;
|
|
|
|
result = rt_qspi_send_then_recv(qspi_device, &w25x_txCMD1, 1, &u8Val, 1);
|
|
RT_ASSERT(result > 0);
|
|
|
|
return u8Val;
|
|
}
|
|
|
|
static rt_uint8_t SpiFlash_ReadStatusReg2(struct rt_qspi_device *qspi_device)
|
|
{
|
|
rt_uint8_t u8Val;
|
|
rt_err_t result = RT_EOK;
|
|
rt_uint8_t w25x_txCMD1 = W25X_REG_READSTATUS2;
|
|
|
|
result = rt_qspi_send_then_recv(qspi_device, &w25x_txCMD1, 1, &u8Val, 1);
|
|
RT_ASSERT(result > 0);
|
|
|
|
return u8Val;
|
|
}
|
|
|
|
static rt_err_t SpiFlash_WriteStatusReg(struct rt_qspi_device *qspi_device, uint8_t u8Value1, uint8_t u8Value2)
|
|
{
|
|
rt_uint8_t w25x_txCMD1;
|
|
rt_uint8_t au8Val[2];
|
|
rt_err_t result;
|
|
struct rt_qspi_message qspi_message = {0};
|
|
|
|
/* Enable WE */
|
|
w25x_txCMD1 = W25X_REG_WRITEENABLE;
|
|
result = rt_qspi_send(qspi_device, &w25x_txCMD1, sizeof(w25x_txCMD1));
|
|
if (result != sizeof(w25x_txCMD1))
|
|
goto exit_SpiFlash_WriteStatusReg;
|
|
|
|
/* Prepare status-1, 2 data */
|
|
au8Val[0] = u8Value1;
|
|
au8Val[1] = u8Value2;
|
|
|
|
/* 1-bit mode: Instruction+payload */
|
|
qspi_message.instruction.content = W25X_REG_WRITESTATUS;
|
|
qspi_message.instruction.qspi_lines = 1;
|
|
|
|
qspi_message.qspi_data_lines = 1;
|
|
qspi_message.parent.cs_take = 1;
|
|
qspi_message.parent.cs_release = 1;
|
|
qspi_message.parent.send_buf = &au8Val[0];
|
|
qspi_message.parent.length = sizeof(au8Val);
|
|
qspi_message.parent.next = RT_NULL;
|
|
|
|
if (rt_qspi_transfer_message(qspi_device, &qspi_message) != sizeof(au8Val))
|
|
{
|
|
result = -RT_ERROR;
|
|
}
|
|
|
|
result = RT_EOK;
|
|
|
|
exit_SpiFlash_WriteStatusReg:
|
|
|
|
return result;
|
|
}
|
|
|
|
static void SpiFlash_WaitReady(struct rt_qspi_device *qspi_device)
|
|
{
|
|
volatile uint8_t u8ReturnValue;
|
|
|
|
do
|
|
{
|
|
u8ReturnValue = SpiFlash_ReadStatusReg(qspi_device);
|
|
u8ReturnValue = u8ReturnValue & 1;
|
|
}
|
|
while (u8ReturnValue != 0); // check the BUSY bit
|
|
}
|
|
|
|
static void SpiFlash_EnterQspiMode(struct rt_qspi_device *qspi_device)
|
|
{
|
|
rt_err_t result = RT_EOK;
|
|
|
|
uint8_t u8Status1 = SpiFlash_ReadStatusReg(qspi_device);
|
|
uint8_t u8Status2 = SpiFlash_ReadStatusReg2(qspi_device);
|
|
|
|
u8Status2 |= W25X_REG_QUADENABLE;
|
|
|
|
result = SpiFlash_WriteStatusReg(qspi_device, u8Status1, u8Status2);
|
|
RT_ASSERT(result == RT_EOK);
|
|
|
|
SpiFlash_WaitReady(qspi_device);
|
|
}
|
|
|
|
static void SpiFlash_ExitQspiMode(struct rt_qspi_device *qspi_device)
|
|
{
|
|
rt_err_t result = RT_EOK;
|
|
uint8_t u8Status1 = SpiFlash_ReadStatusReg(qspi_device);
|
|
uint8_t u8Status2 = SpiFlash_ReadStatusReg2(qspi_device);
|
|
|
|
u8Status2 &= ~W25X_REG_QUADENABLE;
|
|
|
|
result = SpiFlash_WriteStatusReg(qspi_device, u8Status1, u8Status2);
|
|
RT_ASSERT(result == RT_EOK);
|
|
|
|
SpiFlash_WaitReady(qspi_device);
|
|
}
|
|
|
|
static int rt_hw_spiflash_init(void)
|
|
{
|
|
if (nu_qspi_bus_attach_device("qspi0", "qspi01", 4, SpiFlash_EnterQspiMode, SpiFlash_ExitQspiMode) != RT_EOK)
|
|
return -1;
|
|
|
|
#if defined(RT_USING_SFUD)
|
|
if (rt_sfud_flash_probe(FAL_USING_NOR_FLASH_DEV_NAME, "qspi01") == RT_NULL)
|
|
{
|
|
return -(RT_ERROR);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
INIT_COMPONENT_EXPORT(rt_hw_spiflash_init);
|
|
#endif
|
|
|
|
#if defined(BOARD_USING_STORAGE_SPINAND) && defined(NU_PKG_USING_SPINAND)
|
|
|
|
#include "drv_qspi.h"
|
|
#include "spinand.h"
|
|
|
|
struct rt_mtd_nand_device mtd_partitions[MTD_SPINAND_PARTITION_NUM] =
|
|
{
|
|
[0] =
|
|
{
|
|
.block_start = 0,
|
|
.block_end = 63,
|
|
.block_total = 64,
|
|
},
|
|
[1] =
|
|
{
|
|
.block_start = 64,
|
|
.block_end = 1023,
|
|
.block_total = 1000,
|
|
},
|
|
[2] =
|
|
{
|
|
.block_start = 0,
|
|
.block_end = 1023,
|
|
.block_total = 1024,
|
|
}
|
|
};
|
|
|
|
static int rt_hw_spinand_init(void)
|
|
{
|
|
if (nu_qspi_bus_attach_device("qspi0", "qspi01", 4, RT_NULL, RT_NULL) != RT_EOK)
|
|
return -1;
|
|
|
|
if (rt_hw_mtd_spinand_register("qspi01") != RT_EOK)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
INIT_COMPONENT_EXPORT(rt_hw_spinand_init);
|
|
#endif
|
|
|
|
#if defined(BSP_USING_ADC_TOUCH) && defined(NU_PKG_USING_ADC_TOUCH)
|
|
#include "adc_touch.h"
|
|
#if (BSP_LCD_WIDTH==320) && (BSP_LCD_HEIGHT==240)
|
|
S_CALIBRATION_MATRIX g_sCalMat = { 43, -5839, 21672848, 4193, -11, -747882, 65536 };
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(BOARD_USING_LCD_ILI9341) && defined(NU_PKG_USING_ILI9341_SPI)
|
|
#include <lcd_ili9341.h>
|
|
#if defined(PKG_USING_GUIENGINE)
|
|
#include <rtgui/driver.h>
|
|
#endif
|
|
int rt_hw_ili9341_port(void)
|
|
{
|
|
if (rt_hw_lcd_ili9341_spi_init("spi0", RT_NULL) != RT_EOK)
|
|
return -1;
|
|
|
|
rt_hw_lcd_ili9341_init();
|
|
|
|
#if defined(PKG_USING_GUIENGINE)
|
|
rt_device_t lcd_ili9341;
|
|
lcd_ili9341 = rt_device_find("lcd");
|
|
if (lcd_ili9341)
|
|
{
|
|
rtgui_graphic_set_device(lcd_ili9341);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
INIT_COMPONENT_EXPORT(rt_hw_ili9341_port);
|
|
#endif /* BOARD_USING_LCD_ILI9341 */
|
|
|
|
|
|
#if defined(BOARD_USING_ESP8266)
|
|
#include <at_device_esp8266.h>
|
|
|
|
#define LOG_TAG "at.sample.esp"
|
|
#undef DBG_TAG
|
|
#undef DBG_LVL
|
|
#include <at_log.h>
|
|
|
|
static struct at_device_esp8266 esp0 =
|
|
{
|
|
"esp0", /* esp8266 device name */
|
|
"uart1", /* esp8266 serial device name, EX: uart1, uuart1 */
|
|
|
|
"NT_ZY_BUFFALO", /* Wi-Fi SSID */
|
|
"12345678", /* Wi-Fi PASSWORD */
|
|
2048 /* Receive buffer length */
|
|
};
|
|
|
|
static int rt_hw_esp8266_port(void)
|
|
{
|
|
struct at_device_esp8266 *esp8266 = &esp0;
|
|
|
|
return at_device_register(&(esp8266->device),
|
|
esp8266->device_name,
|
|
esp8266->client_name,
|
|
AT_DEVICE_CLASS_ESP8266,
|
|
(void *) esp8266);
|
|
}
|
|
INIT_APP_EXPORT(rt_hw_esp8266_port);
|
|
|
|
static int at_wifi_set(int argc, char **argv)
|
|
{
|
|
struct at_device_ssid_pwd sATDConf;
|
|
struct at_device *at_dev = RT_NULL;
|
|
|
|
/* If the number of arguments less than 2 */
|
|
if (argc != 3)
|
|
{
|
|
rt_kprintf("\n");
|
|
rt_kprintf("at_wifi_set <ssid> <password>\n");
|
|
return -1;
|
|
}
|
|
|
|
sATDConf.ssid = argv[1]; //ssid
|
|
sATDConf.password = argv[2]; //password
|
|
|
|
if ((at_dev = at_device_get_first_initialized()) != RT_NULL)
|
|
at_device_control(at_dev, AT_DEVICE_CTRL_SET_WIFI_INFO, &sATDConf);
|
|
else
|
|
{
|
|
rt_kprintf("Can't find any initialized AT device.\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#ifdef FINSH_USING_MSH
|
|
MSH_CMD_EXPORT(at_wifi_set, AT device wifi set ssid / password function);
|
|
#endif
|
|
#endif /* BOARD_USING_ESP8266 */
|
|
|
|
|
|
#if defined(BOARD_USING_NAU8822) && defined(NU_PKG_USING_NAU8822)
|
|
#include <acodec_nau8822.h>
|
|
S_NU_NAU8822_CONFIG sCodecConfig =
|
|
{
|
|
.i2c_bus_name = "i2c0",
|
|
|
|
.i2s_bus_name = "sound0",
|
|
|
|
.pin_phonejack_en = 0,
|
|
|
|
.pin_phonejack_det = 0,
|
|
};
|
|
|
|
int rt_hw_nau8822_port(void)
|
|
{
|
|
if (nu_hw_nau8822_init(&sCodecConfig) != RT_EOK)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
INIT_COMPONENT_EXPORT(rt_hw_nau8822_port);
|
|
#endif /* BOARD_USING_NAU8822 */
|