rt-thread-official/libcpu/arm/cortex-a/start_gcc.S

728 lines
16 KiB
ArmAsm

/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2013-07-05 Bernard the first version
* 2018-11-22 Jesven in the interrupt context, use rt_scheduler_do_irq_switch checks
* and switches to a new thread
*/
#include "rtconfig.h"
.equ Mode_USR, 0x10
.equ Mode_FIQ, 0x11
.equ Mode_IRQ, 0x12
.equ Mode_SVC, 0x13
.equ Mode_ABT, 0x17
.equ Mode_UND, 0x1B
.equ Mode_SYS, 0x1F
.equ I_Bit, 0x80 /* when I bit is set, IRQ is disabled */
.equ F_Bit, 0x40 /* when F bit is set, FIQ is disabled */
#ifdef RT_USING_SMART
.data
.align 14
init_mtbl:
.space 16*1024
#endif
.text
/* reset entry */
.globl _reset
_reset:
#ifdef ARCH_ARMV8
/* Check for HYP mode */
mrs r0, cpsr_all
and r0, r0, #0x1F
mov r8, #0x1A
cmp r0, r8
beq overHyped
b continue
overHyped: /* Get out of HYP mode */
adr r1, continue
msr ELR_hyp, r1
mrs r1, cpsr_all
and r1, r1, #0x1f /* CPSR_MODE_MASK */
orr r1, r1, #0x13 /* CPSR_MODE_SUPERVISOR */
msr SPSR_hyp, r1
eret
continue:
#endif
#ifdef SOC_BCM283x
/* Suspend the other cpu cores */
mrc p15, 0, r0, c0, c0, 5
ands r0, #3
bne _halt
/* Disable IRQ & FIQ */
cpsid if
/* Check for HYP mode */
mrs r0, cpsr_all
and r0, r0, #0x1F
mov r8, #0x1A
cmp r0, r8
beq overHyped
b continue
overHyped: /* Get out of HYP mode */
adr r1, continue
msr ELR_hyp, r1
mrs r1, cpsr_all
and r1, r1, #0x1f /* CPSR_MODE_MASK */
orr r1, r1, #0x13 /* CPSR_MODE_SUPERVISOR */
msr SPSR_hyp, r1
eret
continue:
/* set the cpu to SVC32 mode and disable interrupt */
mrs r0, cpsr
bic r0, r0, #0x1f
orr r0, r0, #0x13
msr cpsr_c, r0
#endif
/* invalid tlb before enable mmu */
mrc p15, 0, r0, c1, c0, 0
bic r0, #1
mcr p15, 0, r0, c1, c0, 0
dsb
isb
mov r0, #0
mcr p15, 0, r0, c8, c7, 0
mcr p15, 0, r0, c7, c5, 0 /* iciallu */
mcr p15, 0, r0, c7, c5, 6 /* bpiall */
dsb
isb
#ifdef RT_USING_SMART
/* load r5 with PV_OFFSET */
ldr r7, =_reset
adr r5, _reset
sub r5, r5, r7
mov r7, #0x100000
sub r7, #1
mvn r8, r7
ldr r9, =KERNEL_VADDR_START
ldr r6, =__bss_end
add r6, r7
and r6, r8 /* r6 end vaddr align up to 1M */
sub r6, r9 /* r6 is size */
ldr sp, =svc_stack_n_limit
add sp, r5 /* use paddr */
ldr r0, =init_mtbl
add r0, r5
mov r1, r6
mov r2, r5
bl init_mm_setup
ldr lr, =after_enable_mmu
ldr r0, =init_mtbl
add r0, r5
b enable_mmu
after_enable_mmu:
#endif
#ifndef SOC_BCM283x
/* set the cpu to SVC32 mode and disable interrupt */
cps #Mode_SVC
#endif
#ifdef RT_USING_FPU
mov r4, #0xfffffff
mcr p15, 0, r4, c1, c0, 2
#endif
/* disable the data alignment check */
mrc p15, 0, r1, c1, c0, 0
bic r1, #(1<<1) /* Disable Alignment fault checking */
#ifndef RT_USING_SMART
bic r1, #(1<<0) /* Disable MMU */
bic r1, #(1<<2) /* Disable data cache */
bic r1, #(1<<11) /* Disable program flow prediction */
bic r1, #(1<<12) /* Disable instruction cache */
bic r1, #(3<<19) /* bit[20:19] must be zero */
#endif /* RT_USING_SMART */
mcr p15, 0, r1, c1, c0, 0
#ifndef RT_USING_SMART
#ifdef RT_USING_SMP
/* Use spin-table to start secondary cores */
@ get cpu id, and subtract the offset from the stacks base address
bl rt_hw_cpu_id
mov r5, r0
cmp r5, #0 @ cpu id == 0
beq normal_setup
@ cpu id > 0, stop or wait
#ifdef RT_SMP_AUTO_BOOT
ldr r0, =secondary_cpu_entry
mov r1, #0
str r1, [r0] /* clean secondary_cpu_entry */
#endif /* RT_SMP_AUTO_BOOT */
secondary_loop:
@ cpu core 1 goes into sleep until core 0 wakeup it
wfe
#ifdef RT_SMP_AUTO_BOOT
ldr r1, =secondary_cpu_entry
ldr r0, [r1]
cmp r0, #0
blxne r0 /* if(secondary_cpu_entry) secondary_cpu_entry(); */
#endif /* RT_SMP_AUTO_BOOT */
b secondary_loop
normal_setup:
#endif /* RT_USING_SMP */
#endif /* RT_USING_SMART */
/* enable I cache + branch prediction */
mrc p15, 0, r0, c1, c0, 0
orr r0, r0, #(1<<12)
orr r0, r0, #(1<<11)
mcr p15, 0, r0, c1, c0, 0
/* setup stack */
bl stack_setup
/* clear .bss */
mov r0,#0 /* get a zero */
ldr r1,=__bss_start /* bss start */
ldr r2,=__bss_end /* bss end */
bss_loop:
cmp r1,r2 /* check if data to clear */
strlo r0,[r1],#4 /* clear 4 bytes */
blo bss_loop /* loop until done */
mov r0, r5
bl rt_kmem_pvoff_set
#ifdef RT_USING_SMP
mrc p15, 0, r1, c1, c0, 1
mov r0, #(1<<6)
orr r1, r0
mcr p15, 0, r1, c1, c0, 1 /* enable smp */
#endif
/**
* void rt_hw_init_mmu_table(struct mem_desc *mdesc, rt_uint32_t size)
* initialize the mmu table and enable mmu
*/
ldr r0, =platform_mem_desc
ldr r1, =platform_mem_desc_size
ldr r1, [r1]
bl rt_hw_init_mmu_table
#ifdef RT_USING_SMART
ldr r0, =MMUTable /* vaddr */
add r0, r5 /* to paddr */
bl rt_hw_mmu_switch
#else
bl rt_hw_mmu_init
#endif
/* start RT-Thread Kernel */
ldr pc, _rtthread_startup
_rtthread_startup:
.word rtthread_startup
.weak rt_asm_cpu_id
rt_asm_cpu_id:
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #0xf
mov pc, lr
stack_setup:
#ifdef RT_USING_SMP
/* cpu id */
mov r10, lr
bl rt_asm_cpu_id
mov lr, r10
add r0, r0, #1
#else
mov r0, #1
#endif
cps #Mode_UND
ldr r1, =und_stack_n
add sp, r1, r0, asl #12
cps #Mode_IRQ
ldr r1, =irq_stack_n
add sp, r1, r0, asl #12
cps #Mode_FIQ
ldr r1, =irq_stack_n
add sp, r1, r0, asl #12
cps #Mode_ABT
ldr r1, =abt_stack_n
add sp, r1, r0, asl #12
cps #Mode_SVC
ldr r1, =svc_stack_n
add sp, r1, r0, asl #12
bx lr
#ifdef RT_USING_SMART
.align 2
.global enable_mmu
enable_mmu:
orr r0, #0x18
mcr p15, 0, r0, c2, c0, 0 /* ttbr0 */
mov r0, #(1 << 5) /* PD1=1 */
mcr p15, 0, r0, c2, c0, 2 /* ttbcr */
mov r0, #1
mcr p15, 0, r0, c3, c0, 0 /* dacr */
/* invalid tlb before enable mmu */
mov r0, #0
mcr p15, 0, r0, c8, c7, 0
mcr p15, 0, r0, c7, c5, 0 /* iciallu */
mcr p15, 0, r0, c7, c5, 6 /* bpiall */
mrc p15, 0, r0, c1, c0, 0
orr r0, #((1 << 12) | (1 << 11)) /* instruction cache, branch prediction */
orr r0, #((1 << 2) | (1 << 0)) /* data cache, mmu enable */
mcr p15, 0, r0, c1, c0, 0
dsb
isb
mov pc, lr
.global rt_hw_set_process_id
rt_hw_set_process_id:
LSL r0, r0, #8
MCR p15, 0, r0, c13, c0, 1
mov pc, lr
#endif
.global rt_hw_mmu_switch
rt_hw_mmu_switch:
orr r0, #0x18
mcr p15, 0, r0, c2, c0, 0 // ttbr0
//invalid tlb
mov r0, #0
mcr p15, 0, r0, c8, c7, 0
mcr p15, 0, r0, c7, c5, 0 //iciallu
mcr p15, 0, r0, c7, c5, 6 //bpiall
dsb
isb
mov pc, lr
.global rt_hw_mmu_tbl_get
rt_hw_mmu_tbl_get:
mrc p15, 0, r0, c2, c0, 0 /* ttbr0 */
bic r0, #0x18
mov pc, lr
_halt:
wfe
b _halt
#ifdef RT_USING_SMP
.global rt_secondary_cpu_entry
rt_secondary_cpu_entry:
#ifdef RT_USING_SMART
ldr r0, =_reset
adr r5, _reset
sub r5, r5, r0
ldr lr, =after_enable_mmu_n
ldr r0, =init_mtbl
add r0, r5
b enable_mmu
after_enable_mmu_n:
ldr r0, =MMUTable
add r0, r5
bl rt_hw_mmu_switch
#endif
#ifdef RT_USING_FPU
mov r4, #0xfffffff
mcr p15, 0, r4, c1, c0, 2
#endif
mrc p15, 0, r1, c1, c0, 1
mov r0, #(1<<6)
orr r1, r0
mcr p15, 0, r1, c1, c0, 1 /* enable smp */
mrc p15, 0, r0, c1, c0, 0
bic r0, #(1<<13)
mcr p15, 0, r0, c1, c0, 0
bl stack_setup
/* initialize the mmu table and enable mmu */
#ifndef RT_USING_SMART
bl rt_hw_mmu_init
#endif
b rt_hw_secondary_cpu_bsp_start
#endif
/* exception handlers: undef, swi, padt, dabt, resv, irq, fiq */
.section .text.isr, "ax"
.align 5
.globl vector_fiq
vector_fiq:
stmfd sp!,{r0-r7,lr}
bl rt_hw_trap_fiq
ldmfd sp!,{r0-r7,lr}
subs pc, lr, #4
.globl rt_interrupt_enter
.globl rt_interrupt_leave
.globl rt_thread_switch_interrupt_flag
.globl rt_interrupt_from_thread
.globl rt_interrupt_to_thread
.globl rt_current_thread
.globl vmm_thread
.globl vmm_virq_check
.align 5
.globl vector_irq
vector_irq:
#ifdef RT_USING_SMP
stmfd sp!, {r0, r1}
cps #Mode_SVC
mov r0, sp /* svc_sp */
mov r1, lr /* svc_lr */
cps #Mode_IRQ
sub lr, #4
stmfd r0!, {r1, lr} /* svc_lr, svc_pc */
stmfd r0!, {r2 - r12}
ldmfd sp!, {r1, r2} /* original r0, r1 */
stmfd r0!, {r1 - r2}
mrs r1, spsr /* original mode */
stmfd r0!, {r1}
#ifdef RT_USING_SMART
stmfd r0, {r13, r14}^ /* usr_sp, usr_lr */
sub r0, #8
#endif
#ifdef RT_USING_FPU
/* fpu context */
vmrs r6, fpexc
tst r6, #(1<<30)
beq 1f
vstmdb r0!, {d0-d15}
vstmdb r0!, {d16-d31}
vmrs r5, fpscr
stmfd r0!, {r5}
1:
stmfd r0!, {r6}
#endif
/* now irq stack is clean */
/* r0 is task svc_sp */
/* backup r0 -> r8 */
mov r8, r0
cps #Mode_SVC
mov sp, r8
bl rt_interrupt_enter
bl rt_hw_trap_irq
bl rt_interrupt_leave
mov r0, r8
bl rt_scheduler_do_irq_switch
b rt_hw_context_switch_exit
#else
stmfd sp!, {r0-r12,lr}
bl rt_interrupt_enter
bl rt_hw_trap_irq
bl rt_interrupt_leave
/* if rt_thread_switch_interrupt_flag set, jump to
* rt_hw_context_switch_interrupt_do and don't return */
ldr r0, =rt_thread_switch_interrupt_flag
ldr r1, [r0]
cmp r1, #1
beq rt_hw_context_switch_interrupt_do
#ifdef RT_USING_SMART
ldmfd sp!, {r0-r12,lr}
cps #Mode_SVC
push {r0-r12}
mov r7, lr
cps #Mode_IRQ
mrs r4, spsr
sub r5, lr, #4
cps #Mode_SVC
and r6, r4, #0x1f
cmp r6, #0x10
bne 1f
msr spsr_csxf, r4
mov lr, r5
pop {r0-r12}
b arch_ret_to_user
1:
mov lr, r7
cps #Mode_IRQ
msr spsr_csxf, r4
mov lr, r5
cps #Mode_SVC
pop {r0-r12}
cps #Mode_IRQ
movs pc, lr
#else
ldmfd sp!, {r0-r12,lr}
subs pc, lr, #4
#endif
rt_hw_context_switch_interrupt_do:
mov r1, #0 /* clear flag */
str r1, [r0]
mov r1, sp /* r1 point to {r0-r3} in stack */
add sp, sp, #4*4
ldmfd sp!, {r4-r12,lr} /* reload saved registers */
mrs r0, spsr /* get cpsr of interrupt thread */
sub r2, lr, #4 /* save old task's pc to r2 */
/* Switch to SVC mode with no interrupt. If the usr mode guest is
* interrupted, this will just switch to the stack of kernel space.
* save the registers in kernel space won't trigger data abort. */
msr cpsr_c, #I_Bit|F_Bit|Mode_SVC
stmfd sp!, {r2} /* push old task's pc */
stmfd sp!, {r4-r12,lr} /* push old task's lr,r12-r4 */
ldmfd r1, {r1-r4} /* restore r0-r3 of the interrupt thread */
stmfd sp!, {r1-r4} /* push old task's r0-r3 */
stmfd sp!, {r0} /* push old task's cpsr */
#ifdef RT_USING_SMART
stmfd sp, {r13, r14}^ /*push usr_sp, usr_lr */
sub sp, #8
#endif
#ifdef RT_USING_FPU
/* fpu context */
vmrs r6, fpexc
tst r6, #(1<<30)
beq 1f
vstmdb sp!, {d0-d15}
vstmdb sp!, {d16-d31}
vmrs r5, fpscr
stmfd sp!, {r5}
1:
stmfd sp!, {r6}
#endif
ldr r4, =rt_interrupt_from_thread
ldr r5, [r4]
str sp, [r5] /* store sp in preempted tasks's TCB */
ldr r6, =rt_interrupt_to_thread
ldr r6, [r6]
ldr sp, [r6] /* get new task's stack pointer */
#ifdef RT_USING_SMART
bl rt_thread_self
mov r4, r0
bl lwp_aspace_switch
mov r0, r4
bl lwp_user_setting_restore
#endif
#ifdef RT_USING_FPU
/* fpu context */
ldmfd sp!, {r6}
vmsr fpexc, r6
tst r6, #(1<<30)
beq 1f
ldmfd sp!, {r5}
vmsr fpscr, r5
vldmia sp!, {d16-d31}
vldmia sp!, {d0-d15}
1:
#endif
#ifdef RT_USING_SMART
ldmfd sp, {r13, r14}^ /*pop usr_sp, usr_lr */
add sp, #8
#endif
ldmfd sp!, {r4} /* pop new task's cpsr to spsr */
msr spsr_cxsf, r4
#ifdef RT_USING_SMART
and r4, #0x1f
cmp r4, #0x10
bne 1f
ldmfd sp!, {r0-r12,lr}
ldmfd sp!, {lr}
b arch_ret_to_user
1:
#endif
/* pop new task's r0-r12,lr & pc, copy spsr to cpsr */
ldmfd sp!, {r0-r12,lr,pc}^
#endif
.macro push_svc_reg
sub sp, sp, #17 * 4 /* Sizeof(struct rt_hw_exp_stack) */
stmia sp, {r0 - r12} /* Calling r0-r12 */
mov r0, sp
add sp, sp, #17 * 4
mrs r6, spsr /* Save CPSR */
str lr, [r0, #15*4] /* Push PC */
str r6, [r0, #16*4] /* Push CPSR */
and r1, r6, #0x1f
cmp r1, #0x10
cps #Mode_SYS
streq sp, [r0, #13*4] /* Save calling SP */
streq lr, [r0, #14*4] /* Save calling PC */
cps #Mode_SVC
strne sp, [r0, #13*4] /* Save calling SP */
strne lr, [r0, #14*4] /* Save calling PC */
.endm
.align 5
.weak vector_swi
vector_swi:
push_svc_reg
bl rt_hw_trap_swi
b .
.align 5
.globl vector_undef
vector_undef:
push_svc_reg
bl rt_hw_trap_undef
#ifdef RT_USING_FPU
cps #Mode_UND
sub sp, sp, #17 * 4
ldr lr, [sp, #15*4]
ldmia sp, {r0 - r12}
add sp, sp, #17 * 4
movs pc, lr
#endif
b .
.align 5
.globl vector_pabt
vector_pabt:
push_svc_reg
#ifdef RT_USING_SMART
/* cp Mode_ABT stack to SVC */
sub sp, sp, #17 * 4 /* Sizeof(struct rt_hw_exp_stack) */
mov lr, r0
ldmia lr, {r0 - r12}
stmia sp, {r0 - r12}
add r1, lr, #13 * 4
add r2, sp, #13 * 4
ldmia r1, {r4 - r7}
stmia r2, {r4 - r7}
mov r0, sp
bl rt_hw_trap_pabt
/* return to user */
ldr lr, [sp, #16*4] /* orign spsr */
msr spsr_cxsf, lr
ldr lr, [sp, #15*4] /* orign pc */
ldmia sp, {r0 - r12}
add sp, #17 * 4
b arch_ret_to_user
#else
bl rt_hw_trap_pabt
b .
#endif
.align 5
.globl vector_dabt
vector_dabt:
push_svc_reg
#ifdef RT_USING_SMART
/* cp Mode_ABT stack to SVC */
sub sp, sp, #17 * 4 /* Sizeof(struct rt_hw_exp_stack) */
mov lr, r0
ldmia lr, {r0 - r12}
stmia sp, {r0 - r12}
add r1, lr, #13 * 4
add r2, sp, #13 * 4
ldmia r1, {r4 - r7}
stmia r2, {r4 - r7}
mov r0, sp
bl rt_hw_trap_dabt
/* return to user */
ldr lr, [sp, #16*4] /* orign spsr */
msr spsr_cxsf, lr
ldr lr, [sp, #15*4] /* orign pc */
ldmia sp, {r0 - r12}
add sp, #17 * 4
b arch_ret_to_user
#else
bl rt_hw_trap_dabt
b .
#endif
.align 5
.globl vector_resv
vector_resv:
push_svc_reg
bl rt_hw_trap_resv
b .
.global rt_hw_clz
rt_hw_clz:
clz r0, r0
bx lr
#ifndef RT_CPUS_NR
#define RT_CPUS_NR 1
#endif
#include "asm-generic.h"
START_POINT(_thread_start)
mov r10, lr
blx r1
blx r10
b . /* never here */
START_POINT_END(_thread_start)
.bss
.align 3 /* align to 2~3=8 */
svc_stack_n:
.space (RT_CPUS_NR << 12)
svc_stack_n_limit:
irq_stack_n:
.space (RT_CPUS_NR << 12)
und_stack_n:
.space (RT_CPUS_NR << 12)
abt_stack_n:
.space (RT_CPUS_NR << 12)