libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/imxrt/Libraries/imxrt1050/devices/MIMXRT1052/drivers/fsl_lpspi.h

1146 lines
45 KiB
C
Raw Blame History

/*
* The Clear BSD License
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_LPSPI_H_
#define _FSL_LPSPI_H_
#include "fsl_common.h"
/*!
* @addtogroup lpspi_driver
* @{
*/
/**********************************************************************************************************************
* Definitions
*********************************************************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief LPSPI driver version 2.0.1. */
#define FSL_LPSPI_DRIVER_VERSION (MAKE_VERSION(2, 0, 2))
/*@}*/
#ifndef LPSPI_DUMMY_DATA
/*! @brief LPSPI dummy data if no Tx data.*/
#define LPSPI_DUMMY_DATA (0x00U) /*!< Dummy data used for tx if there is not txData. */
#endif
/*! @brief Global variable for dummy data value setting. */
extern volatile uint8_t g_lpspiDummyData[];
/*! @brief Status for the LPSPI driver.*/
enum _lpspi_status
{
kStatus_LPSPI_Busy = MAKE_STATUS(kStatusGroup_LPSPI, 0), /*!< LPSPI transfer is busy.*/
kStatus_LPSPI_Error = MAKE_STATUS(kStatusGroup_LPSPI, 1), /*!< LPSPI driver error. */
kStatus_LPSPI_Idle = MAKE_STATUS(kStatusGroup_LPSPI, 2), /*!< LPSPI is idle.*/
kStatus_LPSPI_OutOfRange = MAKE_STATUS(kStatusGroup_LPSPI, 3) /*!< LPSPI transfer out Of range. */
};
/*! @brief LPSPI status flags in SPIx_SR register.*/
enum _lpspi_flags
{
kLPSPI_TxDataRequestFlag = LPSPI_SR_TDF_MASK, /*!< Transmit data flag */
kLPSPI_RxDataReadyFlag = LPSPI_SR_RDF_MASK, /*!< Receive data flag */
kLPSPI_WordCompleteFlag = LPSPI_SR_WCF_MASK, /*!< Word Complete flag */
kLPSPI_FrameCompleteFlag = LPSPI_SR_FCF_MASK, /*!< Frame Complete flag */
kLPSPI_TransferCompleteFlag = LPSPI_SR_TCF_MASK, /*!< Transfer Complete flag */
kLPSPI_TransmitErrorFlag = LPSPI_SR_TEF_MASK, /*!< Transmit Error flag (FIFO underrun) */
kLPSPI_ReceiveErrorFlag = LPSPI_SR_REF_MASK, /*!< Receive Error flag (FIFO overrun) */
kLPSPI_DataMatchFlag = LPSPI_SR_DMF_MASK, /*!< Data Match flag */
kLPSPI_ModuleBusyFlag = LPSPI_SR_MBF_MASK, /*!< Module Busy flag */
kLPSPI_AllStatusFlag = (LPSPI_SR_TDF_MASK | LPSPI_SR_RDF_MASK | LPSPI_SR_WCF_MASK | LPSPI_SR_FCF_MASK |
LPSPI_SR_TCF_MASK | LPSPI_SR_TEF_MASK | LPSPI_SR_REF_MASK | LPSPI_SR_DMF_MASK |
LPSPI_SR_MBF_MASK) /*!< Used for clearing all w1c status flags */
};
/*! @brief LPSPI interrupt source.*/
enum _lpspi_interrupt_enable
{
kLPSPI_TxInterruptEnable = LPSPI_IER_TDIE_MASK, /*!< Transmit data interrupt enable */
kLPSPI_RxInterruptEnable = LPSPI_IER_RDIE_MASK, /*!< Receive data interrupt enable */
kLPSPI_WordCompleteInterruptEnable = LPSPI_IER_WCIE_MASK, /*!< Word complete interrupt enable */
kLPSPI_FrameCompleteInterruptEnable = LPSPI_IER_FCIE_MASK, /*!< Frame complete interrupt enable */
kLPSPI_TransferCompleteInterruptEnable = LPSPI_IER_TCIE_MASK, /*!< Transfer complete interrupt enable */
kLPSPI_TransmitErrorInterruptEnable = LPSPI_IER_TEIE_MASK, /*!< Transmit error interrupt enable(FIFO underrun)*/
kLPSPI_ReceiveErrorInterruptEnable = LPSPI_IER_REIE_MASK, /*!< Receive Error interrupt enable (FIFO overrun) */
kLPSPI_DataMatchInterruptEnable = LPSPI_IER_DMIE_MASK, /*!< Data Match interrupt enable */
kLPSPI_AllInterruptEnable =
(LPSPI_IER_TDIE_MASK | LPSPI_IER_RDIE_MASK | LPSPI_IER_WCIE_MASK | LPSPI_IER_FCIE_MASK | LPSPI_IER_TCIE_MASK |
LPSPI_IER_TEIE_MASK | LPSPI_IER_REIE_MASK | LPSPI_IER_DMIE_MASK) /*!< All above interrupts enable.*/
};
/*! @brief LPSPI DMA source.*/
enum _lpspi_dma_enable
{
kLPSPI_TxDmaEnable = LPSPI_DER_TDDE_MASK, /*!< Transmit data DMA enable */
kLPSPI_RxDmaEnable = LPSPI_DER_RDDE_MASK /*!< Receive data DMA enable */
};
/*! @brief LPSPI master or slave mode configuration.*/
typedef enum _lpspi_master_slave_mode
{
kLPSPI_Master = 1U, /*!< LPSPI peripheral operates in master mode.*/
kLPSPI_Slave = 0U /*!< LPSPI peripheral operates in slave mode.*/
} lpspi_master_slave_mode_t;
/*! @brief LPSPI Peripheral Chip Select (PCS) configuration (which PCS to configure).*/
typedef enum _lpspi_which_pcs_config
{
kLPSPI_Pcs0 = 0U, /*!< PCS[0] */
kLPSPI_Pcs1 = 1U, /*!< PCS[1] */
kLPSPI_Pcs2 = 2U, /*!< PCS[2] */
kLPSPI_Pcs3 = 3U /*!< PCS[3] */
} lpspi_which_pcs_t;
/*! @brief LPSPI Peripheral Chip Select (PCS) Polarity configuration.*/
typedef enum _lpspi_pcs_polarity_config
{
kLPSPI_PcsActiveHigh = 1U, /*!< PCS Active High (idles low) */
kLPSPI_PcsActiveLow = 0U /*!< PCS Active Low (idles high) */
} lpspi_pcs_polarity_config_t;
/*! @brief LPSPI Peripheral Chip Select (PCS) Polarity.*/
enum _lpspi_pcs_polarity
{
kLPSPI_Pcs0ActiveLow = 1U << 0, /*!< Pcs0 Active Low (idles high). */
kLPSPI_Pcs1ActiveLow = 1U << 1, /*!< Pcs1 Active Low (idles high). */
kLPSPI_Pcs2ActiveLow = 1U << 2, /*!< Pcs2 Active Low (idles high). */
kLPSPI_Pcs3ActiveLow = 1U << 3, /*!< Pcs3 Active Low (idles high). */
kLPSPI_PcsAllActiveLow = 0xFU /*!< Pcs0 to Pcs5 Active Low (idles high). */
};
/*! @brief LPSPI clock polarity configuration.*/
typedef enum _lpspi_clock_polarity
{
kLPSPI_ClockPolarityActiveHigh = 0U, /*!< CPOL=0. Active-high LPSPI clock (idles low)*/
kLPSPI_ClockPolarityActiveLow = 1U /*!< CPOL=1. Active-low LPSPI clock (idles high)*/
} lpspi_clock_polarity_t;
/*! @brief LPSPI clock phase configuration.*/
typedef enum _lpspi_clock_phase
{
kLPSPI_ClockPhaseFirstEdge = 0U, /*!< CPHA=0. Data is captured on the leading edge of the SCK and changed on the
following edge.*/
kLPSPI_ClockPhaseSecondEdge = 1U /*!< CPHA=1. Data is changed on the leading edge of the SCK and captured on the
following edge.*/
} lpspi_clock_phase_t;
/*! @brief LPSPI data shifter direction options.*/
typedef enum _lpspi_shift_direction
{
kLPSPI_MsbFirst = 0U, /*!< Data transfers start with most significant bit.*/
kLPSPI_LsbFirst = 1U /*!< Data transfers start with least significant bit.*/
} lpspi_shift_direction_t;
/*! @brief LPSPI Host Request select configuration. */
typedef enum _lpspi_host_request_select
{
kLPSPI_HostReqExtPin = 0U, /*!< Host Request is an ext pin. */
kLPSPI_HostReqInternalTrigger = 1U /*!< Host Request is an internal trigger. */
} lpspi_host_request_select_t;
/*! @brief LPSPI Match configuration options. */
typedef enum _lpspi_match_config
{
kLPSI_MatchDisabled = 0x0U, /*!< LPSPI Match Disabled. */
kLPSI_1stWordEqualsM0orM1 = 0x2U, /*!< LPSPI Match Enabled. */
kLPSI_AnyWordEqualsM0orM1 = 0x3U, /*!< LPSPI Match Enabled. */
kLPSI_1stWordEqualsM0and2ndWordEqualsM1 = 0x4U, /*!< LPSPI Match Enabled. */
kLPSI_AnyWordEqualsM0andNxtWordEqualsM1 = 0x5U, /*!< LPSPI Match Enabled. */
kLPSI_1stWordAndM1EqualsM0andM1 = 0x6U, /*!< LPSPI Match Enabled. */
kLPSI_AnyWordAndM1EqualsM0andM1 = 0x7U, /*!< LPSPI Match Enabled. */
} lpspi_match_config_t;
/*! @brief LPSPI pin (SDO and SDI) configuration. */
typedef enum _lpspi_pin_config
{
kLPSPI_SdiInSdoOut = 0U, /*!< LPSPI SDI input, SDO output. */
kLPSPI_SdiInSdiOut = 1U, /*!< LPSPI SDI input, SDI output. */
kLPSPI_SdoInSdoOut = 2U, /*!< LPSPI SDO input, SDO output. */
kLPSPI_SdoInSdiOut = 3U /*!< LPSPI SDO input, SDI output. */
} lpspi_pin_config_t;
/*! @brief LPSPI data output configuration. */
typedef enum _lpspi_data_out_config
{
kLpspiDataOutRetained = 0U, /*!< Data out retains last value when chip select is de-asserted */
kLpspiDataOutTristate = 1U /*!< Data out is tristated when chip select is de-asserted */
} lpspi_data_out_config_t;
/*! @brief LPSPI transfer width configuration. */
typedef enum _lpspi_transfer_width
{
kLPSPI_SingleBitXfer = 0U, /*!< 1-bit shift at a time, data out on SDO, in on SDI (normal mode) */
kLPSPI_TwoBitXfer = 1U, /*!< 2-bits shift out on SDO/SDI and in on SDO/SDI */
kLPSPI_FourBitXfer = 2U /*!< 4-bits shift out on SDO/SDI/PCS[3:2] and in on SDO/SDI/PCS[3:2] */
} lpspi_transfer_width_t;
/*! @brief LPSPI delay type selection.*/
typedef enum _lpspi_delay_type
{
kLPSPI_PcsToSck = 1U, /*!< PCS-to-SCK delay. */
kLPSPI_LastSckToPcs, /*!< Last SCK edge to PCS delay. */
kLPSPI_BetweenTransfer /*!< Delay between transfers. */
} lpspi_delay_type_t;
#define LPSPI_MASTER_PCS_SHIFT (4U) /*!< LPSPI master PCS shift macro , internal used. */
#define LPSPI_MASTER_PCS_MASK (0xF0U) /*!< LPSPI master PCS shift macro , internal used. */
/*! @brief Use this enumeration for LPSPI master transfer configFlags. */
enum _lpspi_transfer_config_flag_for_master
{
kLPSPI_MasterPcs0 = 0U << LPSPI_MASTER_PCS_SHIFT, /*!< LPSPI master transfer use PCS0 signal */
kLPSPI_MasterPcs1 = 1U << LPSPI_MASTER_PCS_SHIFT, /*!< LPSPI master transfer use PCS1 signal */
kLPSPI_MasterPcs2 = 2U << LPSPI_MASTER_PCS_SHIFT, /*!< LPSPI master transfer use PCS2 signal */
kLPSPI_MasterPcs3 = 3U << LPSPI_MASTER_PCS_SHIFT, /*!< LPSPI master transfer use PCS3 signal */
kLPSPI_MasterPcsContinuous = 1U << 20, /*!< Is PCS signal continuous */
kLPSPI_MasterByteSwap =
1U << 22 /*!< Is master swap the byte.
* For example, when want to send data 1 2 3 4 5 6 7 8 (suppose you set
* lpspi_shift_direction_t to MSB).
* 1. If you set bitPerFrame = 8 , no matter the kLPSPI_MasterByteSwapyou flag is used
* or not, the waveform is 1 2 3 4 5 6 7 8.
* 2. If you set bitPerFrame = 16 :
* (1) the waveform is 2 1 4 3 6 5 8 7 if you do not use the kLPSPI_MasterByteSwap flag.
* (2) the waveform is 1 2 3 4 5 6 7 8 if you use the kLPSPI_MasterByteSwap flag.
* 3. If you set bitPerFrame = 32 :
* (1) the waveform is 4 3 2 1 8 7 6 5 if you do not use the kLPSPI_MasterByteSwap flag.
* (2) the waveform is 1 2 3 4 5 6 7 8 if you use the kLPSPI_MasterByteSwap flag.
*/
};
#define LPSPI_SLAVE_PCS_SHIFT (4U) /*!< LPSPI slave PCS shift macro , internal used. */
#define LPSPI_SLAVE_PCS_MASK (0xF0U) /*!< LPSPI slave PCS shift macro , internal used. */
/*! @brief Use this enumeration for LPSPI slave transfer configFlags. */
enum _lpspi_transfer_config_flag_for_slave
{
kLPSPI_SlavePcs0 = 0U << LPSPI_SLAVE_PCS_SHIFT, /*!< LPSPI slave transfer use PCS0 signal */
kLPSPI_SlavePcs1 = 1U << LPSPI_SLAVE_PCS_SHIFT, /*!< LPSPI slave transfer use PCS1 signal */
kLPSPI_SlavePcs2 = 2U << LPSPI_SLAVE_PCS_SHIFT, /*!< LPSPI slave transfer use PCS2 signal */
kLPSPI_SlavePcs3 = 3U << LPSPI_SLAVE_PCS_SHIFT, /*!< LPSPI slave transfer use PCS3 signal */
kLPSPI_SlaveByteSwap =
1U << 22 /*!< Is slave swap the byte.
* For example, when want to send data 1 2 3 4 5 6 7 8 (suppose you set
* lpspi_shift_direction_t to MSB).
* 1. If you set bitPerFrame = 8 , no matter the kLPSPI_SlaveByteSwap flag is used
* or not, the waveform is 1 2 3 4 5 6 7 8.
* 2. If you set bitPerFrame = 16 :
* (1) the waveform is 2 1 4 3 6 5 8 7 if you do not use the kLPSPI_SlaveByteSwap flag.
* (2) the waveform is 1 2 3 4 5 6 7 8 if you use the kLPSPI_SlaveByteSwap flag.
* 3. If you set bitPerFrame = 32 :
* (1) the waveform is 4 3 2 1 8 7 6 5 if you do not use the kLPSPI_SlaveByteSwap flag.
* (2) the waveform is 1 2 3 4 5 6 7 8 if you use the kLPSPI_SlaveByteSwap flag.
*/
};
/*! @brief LPSPI transfer state, which is used for LPSPI transactional API state machine. */
enum _lpspi_transfer_state
{
kLPSPI_Idle = 0x0U, /*!< Nothing in the transmitter/receiver. */
kLPSPI_Busy, /*!< Transfer queue is not finished. */
kLPSPI_Error /*!< Transfer error. */
};
/*! @brief LPSPI master configuration structure.*/
typedef struct _lpspi_master_config
{
uint32_t baudRate; /*!< Baud Rate for LPSPI. */
uint32_t bitsPerFrame; /*!< Bits per frame, minimum 8, maximum 4096.*/
lpspi_clock_polarity_t cpol; /*!< Clock polarity. */
lpspi_clock_phase_t cpha; /*!< Clock phase. */
lpspi_shift_direction_t direction; /*!< MSB or LSB data shift direction. */
uint32_t pcsToSckDelayInNanoSec; /*!< PCS to SCK delay time in nanoseconds, setting to 0 sets the minimum delay.
It sets the boundary value if out of range.*/
uint32_t lastSckToPcsDelayInNanoSec; /*!< Last SCK to PCS delay time in nanoseconds, setting to 0 sets the minimum
delay. It sets the boundary value if out of range.*/
uint32_t
betweenTransferDelayInNanoSec; /*!< After the SCK delay time with nanoseconds, setting to 0 sets the minimum
delay. It sets the boundary value if out of range.*/
lpspi_which_pcs_t whichPcs; /*!< Desired Peripheral Chip Select (PCS). */
lpspi_pcs_polarity_config_t pcsActiveHighOrLow; /*!< Desired PCS active high or low */
lpspi_pin_config_t pinCfg; /*!< Configures which pins are used for input and output data
*during single bit transfers.*/
lpspi_data_out_config_t dataOutConfig; /*!< Configures if the output data is tristated
* between accesses (LPSPI_PCS is negated). */
} lpspi_master_config_t;
/*! @brief LPSPI slave configuration structure.*/
typedef struct _lpspi_slave_config
{
uint32_t bitsPerFrame; /*!< Bits per frame, minimum 8, maximum 4096.*/
lpspi_clock_polarity_t cpol; /*!< Clock polarity. */
lpspi_clock_phase_t cpha; /*!< Clock phase. */
lpspi_shift_direction_t direction; /*!< MSB or LSB data shift direction. */
lpspi_which_pcs_t whichPcs; /*!< Desired Peripheral Chip Select (pcs) */
lpspi_pcs_polarity_config_t pcsActiveHighOrLow; /*!< Desired PCS active high or low */
lpspi_pin_config_t pinCfg; /*!< Configures which pins are used for input and output data
*during single bit transfers.*/
lpspi_data_out_config_t dataOutConfig; /*!< Configures if the output data is tristated
* between accesses (LPSPI_PCS is negated). */
} lpspi_slave_config_t;
/*!
* @brief Forward declaration of the _lpspi_master_handle typedefs.
*/
typedef struct _lpspi_master_handle lpspi_master_handle_t;
/*!
* @brief Forward declaration of the _lpspi_slave_handle typedefs.
*/
typedef struct _lpspi_slave_handle lpspi_slave_handle_t;
/*!
* @brief Master completion callback function pointer type.
*
* @param base LPSPI peripheral address.
* @param handle Pointer to the handle for the LPSPI master.
* @param status Success or error code describing whether the transfer is completed.
* @param userData Arbitrary pointer-dataSized value passed from the application.
*/
typedef void (*lpspi_master_transfer_callback_t)(LPSPI_Type *base,
lpspi_master_handle_t *handle,
status_t status,
void *userData);
/*!
* @brief Slave completion callback function pointer type.
*
* @param base LPSPI peripheral address.
* @param handle Pointer to the handle for the LPSPI slave.
* @param status Success or error code describing whether the transfer is completed.
* @param userData Arbitrary pointer-dataSized value passed from the application.
*/
typedef void (*lpspi_slave_transfer_callback_t)(LPSPI_Type *base,
lpspi_slave_handle_t *handle,
status_t status,
void *userData);
/*! @brief LPSPI master/slave transfer structure.*/
typedef struct _lpspi_transfer
{
uint8_t *txData; /*!< Send buffer. */
uint8_t *rxData; /*!< Receive buffer. */
volatile size_t dataSize; /*!< Transfer bytes. */
uint32_t
configFlags; /*!< Transfer transfer configuration flags. Set from _lpspi_transfer_config_flag_for_master if the
transfer is used for master or _lpspi_transfer_config_flag_for_slave enumeration if the transfer
is used for slave.*/
} lpspi_transfer_t;
/*! @brief LPSPI master transfer handle structure used for transactional API. */
struct _lpspi_master_handle
{
volatile bool isPcsContinuous; /*!< Is PCS continuous in transfer. */
volatile bool writeTcrInIsr; /*!< A flag that whether should write TCR in ISR. */
volatile bool isByteSwap; /*!< A flag that whether should byte swap. */
volatile uint8_t fifoSize; /*!< FIFO dataSize. */
volatile uint8_t rxWatermark; /*!< Rx watermark. */
volatile uint8_t bytesEachWrite; /*!< Bytes for each write TDR. */
volatile uint8_t bytesEachRead; /*!< Bytes for each read RDR. */
uint8_t *volatile txData; /*!< Send buffer. */
uint8_t *volatile rxData; /*!< Receive buffer. */
volatile size_t txRemainingByteCount; /*!< Number of bytes remaining to send.*/
volatile size_t rxRemainingByteCount; /*!< Number of bytes remaining to receive.*/
volatile uint32_t writeRegRemainingTimes; /*!< Write TDR register remaining times. */
volatile uint32_t readRegRemainingTimes; /*!< Read RDR register remaining times. */
uint32_t totalByteCount; /*!< Number of transfer bytes*/
uint32_t txBuffIfNull; /*!< Used if the txData is NULL. */
volatile uint8_t state; /*!< LPSPI transfer state , _lpspi_transfer_state.*/
lpspi_master_transfer_callback_t callback; /*!< Completion callback. */
void *userData; /*!< Callback user data. */
};
/*! @brief LPSPI slave transfer handle structure used for transactional API. */
struct _lpspi_slave_handle
{
volatile bool isByteSwap; /*!< A flag that whether should byte swap. */
volatile uint8_t fifoSize; /*!< FIFO dataSize. */
volatile uint8_t rxWatermark; /*!< Rx watermark. */
volatile uint8_t bytesEachWrite; /*!< Bytes for each write TDR. */
volatile uint8_t bytesEachRead; /*!< Bytes for each read RDR. */
uint8_t *volatile txData; /*!< Send buffer. */
uint8_t *volatile rxData; /*!< Receive buffer. */
volatile size_t txRemainingByteCount; /*!< Number of bytes remaining to send.*/
volatile size_t rxRemainingByteCount; /*!< Number of bytes remaining to receive.*/
volatile uint32_t writeRegRemainingTimes; /*!< Write TDR register remaining times. */
volatile uint32_t readRegRemainingTimes; /*!< Read RDR register remaining times. */
uint32_t totalByteCount; /*!< Number of transfer bytes*/
volatile uint8_t state; /*!< LPSPI transfer state , _lpspi_transfer_state.*/
volatile uint32_t errorCount; /*!< Error count for slave transfer.*/
lpspi_slave_transfer_callback_t callback; /*!< Completion callback. */
void *userData; /*!< Callback user data. */
};
/**********************************************************************************************************************
* API
*********************************************************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /*_cplusplus*/
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief Initializes the LPSPI master.
*
* @param base LPSPI peripheral address.
* @param masterConfig Pointer to structure lpspi_master_config_t.
* @param srcClock_Hz Module source input clock in Hertz
*/
void LPSPI_MasterInit(LPSPI_Type *base, const lpspi_master_config_t *masterConfig, uint32_t srcClock_Hz);
/*!
* @brief Sets the lpspi_master_config_t structure to default values.
*
* This API initializes the configuration structure for LPSPI_MasterInit().
* The initialized structure can remain unchanged in LPSPI_MasterInit(), or can be modified
* before calling the LPSPI_MasterInit().
* Example:
* @code
* lpspi_master_config_t masterConfig;
* LPSPI_MasterGetDefaultConfig(&masterConfig);
* @endcode
* @param masterConfig pointer to lpspi_master_config_t structure
*/
void LPSPI_MasterGetDefaultConfig(lpspi_master_config_t *masterConfig);
/*!
* @brief LPSPI slave configuration.
*
* @param base LPSPI peripheral address.
* @param slaveConfig Pointer to a structure lpspi_slave_config_t.
*/
void LPSPI_SlaveInit(LPSPI_Type *base, const lpspi_slave_config_t *slaveConfig);
/*!
* @brief Sets the lpspi_slave_config_t structure to default values.
*
* This API initializes the configuration structure for LPSPI_SlaveInit().
* The initialized structure can remain unchanged in LPSPI_SlaveInit() or can be modified
* before calling the LPSPI_SlaveInit().
* Example:
* @code
* lpspi_slave_config_t slaveConfig;
* LPSPI_SlaveGetDefaultConfig(&slaveConfig);
* @endcode
* @param slaveConfig pointer to lpspi_slave_config_t structure.
*/
void LPSPI_SlaveGetDefaultConfig(lpspi_slave_config_t *slaveConfig);
/*!
* @brief De-initializes the LPSPI peripheral. Call this API to disable the LPSPI clock.
* @param base LPSPI peripheral address.
*/
void LPSPI_Deinit(LPSPI_Type *base);
/*!
* @brief Restores the LPSPI peripheral to reset state. Note that this function
* sets all registers to reset state. As a result, the LPSPI module can't work after calling
* this API.
* @param base LPSPI peripheral address.
*/
void LPSPI_Reset(LPSPI_Type *base);
/*!
* @brief Enables the LPSPI peripheral and sets the MCR MDIS to 0.
*
* @param base LPSPI peripheral address.
* @param enable Pass true to enable module, false to disable module.
*/
static inline void LPSPI_Enable(LPSPI_Type *base, bool enable)
{
if (enable)
{
base->CR |= LPSPI_CR_MEN_MASK;
}
else
{
base->CR &= ~LPSPI_CR_MEN_MASK;
}
}
/*!
*@}
*/
/*!
* @name Status
* @{
*/
/*!
* @brief Gets the LPSPI status flag state.
* @param base LPSPI peripheral address.
* @return The LPSPI status(in SR register).
*/
static inline uint32_t LPSPI_GetStatusFlags(LPSPI_Type *base)
{
return (base->SR);
}
/*!
* @brief Gets the LPSPI Tx FIFO size.
* @param base LPSPI peripheral address.
* @return The LPSPI Tx FIFO size.
*/
static inline uint32_t LPSPI_GetTxFifoSize(LPSPI_Type *base)
{
return (1U << ((base->PARAM & LPSPI_PARAM_TXFIFO_MASK) >> LPSPI_PARAM_TXFIFO_SHIFT));
}
/*!
* @brief Gets the LPSPI Rx FIFO size.
* @param base LPSPI peripheral address.
* @return The LPSPI Rx FIFO size.
*/
static inline uint32_t LPSPI_GetRxFifoSize(LPSPI_Type *base)
{
return (1U << ((base->PARAM & LPSPI_PARAM_RXFIFO_MASK) >> LPSPI_PARAM_RXFIFO_SHIFT));
}
/*!
* @brief Gets the LPSPI Tx FIFO count.
* @param base LPSPI peripheral address.
* @return The number of words in the transmit FIFO.
*/
static inline uint32_t LPSPI_GetTxFifoCount(LPSPI_Type *base)
{
return ((base->FSR & LPSPI_FSR_TXCOUNT_MASK) >> LPSPI_FSR_TXCOUNT_SHIFT);
}
/*!
* @brief Gets the LPSPI Rx FIFO count.
* @param base LPSPI peripheral address.
* @return The number of words in the receive FIFO.
*/
static inline uint32_t LPSPI_GetRxFifoCount(LPSPI_Type *base)
{
return ((base->FSR & LPSPI_FSR_RXCOUNT_MASK) >> LPSPI_FSR_RXCOUNT_SHIFT);
}
/*!
* @brief Clears the LPSPI status flag.
*
* This function clears the desired status bit by using a write-1-to-clear. The user passes in the base and the
* desired status flag bit to clear. The list of status flags is defined in the _lpspi_flags.
* Example usage:
* @code
* LPSPI_ClearStatusFlags(base, kLPSPI_TxDataRequestFlag|kLPSPI_RxDataReadyFlag);
* @endcode
*
* @param base LPSPI peripheral address.
* @param statusFlags The status flag used from type _lpspi_flags.
*/
static inline void LPSPI_ClearStatusFlags(LPSPI_Type *base, uint32_t statusFlags)
{
base->SR = statusFlags; /*!< The status flags are cleared by writing 1 (w1c).*/
}
/*!
*@}
*/
/*!
* @name Interrupts
* @{
*/
/*!
* @brief Enables the LPSPI interrupts.
*
* This function configures the various interrupt masks of the LPSPI. The parameters are base and an interrupt mask.
* Note that, for Tx fill and Rx FIFO drain requests, enabling the interrupt request disables the DMA request.
*
* @code
* LPSPI_EnableInterrupts(base, kLPSPI_TxInterruptEnable | kLPSPI_RxInterruptEnable );
* @endcode
*
* @param base LPSPI peripheral address.
* @param mask The interrupt mask; Use the enum _lpspi_interrupt_enable.
*/
static inline void LPSPI_EnableInterrupts(LPSPI_Type *base, uint32_t mask)
{
base->IER |= mask;
}
/*!
* @brief Disables the LPSPI interrupts.
*
* @code
* LPSPI_DisableInterrupts(base, kLPSPI_TxInterruptEnable | kLPSPI_RxInterruptEnable );
* @endcode
*
* @param base LPSPI peripheral address.
* @param mask The interrupt mask; Use the enum _lpspi_interrupt_enable.
*/
static inline void LPSPI_DisableInterrupts(LPSPI_Type *base, uint32_t mask)
{
base->IER &= ~mask;
}
/*!
*@}
*/
/*!
* @name DMA Control
* @{
*/
/*!
* @brief Enables the LPSPI DMA request.
*
* This function configures the Rx and Tx DMA mask of the LPSPI. The parameters are base and a DMA mask.
* @code
* LPSPI_EnableDMA(base, kLPSPI_TxDmaEnable | kLPSPI_RxDmaEnable);
* @endcode
*
* @param base LPSPI peripheral address.
* @param mask The interrupt mask; Use the enum _lpspi_dma_enable.
*/
static inline void LPSPI_EnableDMA(LPSPI_Type *base, uint32_t mask)
{
base->DER |= mask;
}
/*!
* @brief Disables the LPSPI DMA request.
*
* This function configures the Rx and Tx DMA mask of the LPSPI. The parameters are base and a DMA mask.
* @code
* SPI_DisableDMA(base, kLPSPI_TxDmaEnable | kLPSPI_RxDmaEnable);
* @endcode
*
* @param base LPSPI peripheral address.
* @param mask The interrupt mask; Use the enum _lpspi_dma_enable.
*/
static inline void LPSPI_DisableDMA(LPSPI_Type *base, uint32_t mask)
{
base->DER &= ~mask;
}
/*!
* @brief Gets the LPSPI Transmit Data Register address for a DMA operation.
*
* This function gets the LPSPI Transmit Data Register address because this value is needed
* for the DMA operation.
* This function can be used for either master or slave mode.
*
* @param base LPSPI peripheral address.
* @return The LPSPI Transmit Data Register address.
*/
static inline uint32_t LPSPI_GetTxRegisterAddress(LPSPI_Type *base)
{
return (uint32_t) & (base->TDR);
}
/*!
* @brief Gets the LPSPI Receive Data Register address for a DMA operation.
*
* This function gets the LPSPI Receive Data Register address because this value is needed
* for the DMA operation.
* This function can be used for either master or slave mode.
*
* @param base LPSPI peripheral address.
* @return The LPSPI Receive Data Register address.
*/
static inline uint32_t LPSPI_GetRxRegisterAddress(LPSPI_Type *base)
{
return (uint32_t) & (base->RDR);
}
/*!
*@}
*/
/*!
* @name Bus Operations
* @{
*/
/*!
* @brief Get instance number for LPSPI module.
*
* @param base LPSPI peripheral base address.
* @return Return the value of LPSPI instance.
*/
uint32_t LPSPI_GetInstance(LPSPI_Type *base);
/*!
* @brief Check the argument for transfer .
*
* @param transfer the transfer struct to be used.
* @param bitPerFrame The bit size of one frame.
* @param bytePerFrame The byte size of one frame.
* @return Return true for right and false for wrong.
*/
bool LPSPI_CheckTransferArgument(lpspi_transfer_t *transfer, uint32_t bitsPerFrame, uint32_t bytesPerFrame);
/*!
* @brief Configures the LPSPI for either master or slave.
*
* Note that the CFGR1 should only be written when the LPSPI is disabled (LPSPIx_CR_MEN = 0).
*
* @param base LPSPI peripheral address.
* @param mode Mode setting (master or slave) of type lpspi_master_slave_mode_t.
*/
static inline void LPSPI_SetMasterSlaveMode(LPSPI_Type *base, lpspi_master_slave_mode_t mode)
{
base->CFGR1 = (base->CFGR1 & (~LPSPI_CFGR1_MASTER_MASK)) | LPSPI_CFGR1_MASTER(mode);
}
/*!
* @brief Returns whether the LPSPI module is in master mode.
*
* @param base LPSPI peripheral address.
* @return Returns true if the module is in master mode or false if the module is in slave mode.
*/
static inline bool LPSPI_IsMaster(LPSPI_Type *base)
{
return (bool)((base->CFGR1) & LPSPI_CFGR1_MASTER_MASK);
}
/*!
* @brief Flushes the LPSPI FIFOs.
*
* @param base LPSPI peripheral address.
* @param flushTxFifo Flushes (true) the Tx FIFO, else do not flush (false) the Tx FIFO.
* @param flushRxFifo Flushes (true) the Rx FIFO, else do not flush (false) the Rx FIFO.
*/
static inline void LPSPI_FlushFifo(LPSPI_Type *base, bool flushTxFifo, bool flushRxFifo)
{
base->CR |= ((uint32_t)flushTxFifo << LPSPI_CR_RTF_SHIFT) | ((uint32_t)flushRxFifo << LPSPI_CR_RRF_SHIFT);
}
/*!
* @brief Sets the transmit and receive FIFO watermark values.
*
* This function allows the user to set the receive and transmit FIFO watermarks. The function
* does not compare the watermark settings to the FIFO size. The FIFO watermark should not be
* equal to or greater than the FIFO size. It is up to the higher level driver to make this check.
*
* @param base LPSPI peripheral address.
* @param txWater The TX FIFO watermark value. Writing a value equal or greater than the FIFO size is truncated.
* @param rxWater The RX FIFO watermark value. Writing a value equal or greater than the FIFO size is truncated.
*/
static inline void LPSPI_SetFifoWatermarks(LPSPI_Type *base, uint32_t txWater, uint32_t rxWater)
{
base->FCR = LPSPI_FCR_TXWATER(txWater) | LPSPI_FCR_RXWATER(rxWater);
}
/*!
* @brief Configures all LPSPI peripheral chip select polarities simultaneously.
*
* Note that the CFGR1 should only be written when the LPSPI is disabled (LPSPIx_CR_MEN = 0).
*
* This is an example: PCS0 and PCS1 set to active low and other PCSs set to active high. Note that the number of
* PCS is device-specific.
* @code
* LPSPI_SetAllPcsPolarity(base, kLPSPI_Pcs0ActiveLow | kLPSPI_Pcs1ActiveLow);
* @endcode
*
* @param base LPSPI peripheral address.
* @param mask The PCS polarity mask; Use the enum _lpspi_pcs_polarity.
*/
static inline void LPSPI_SetAllPcsPolarity(LPSPI_Type *base, uint32_t mask)
{
base->CFGR1 = (base->CFGR1 & ~LPSPI_CFGR1_PCSPOL_MASK) | LPSPI_CFGR1_PCSPOL(~mask);
}
/*!
* @brief Configures the frame size.
*
* The minimum frame size is 8-bits and the maximum frame size is 4096-bits. If the frame size is less than or equal
* to 32-bits, the word size and frame size are identical. If the frame size is greater than 32-bits, the word
* size is 32-bits for each word except the last (the last word contains the remainder bits if the frame size is not
* divisible by 32). The minimum word size is 2-bits. A frame size of 33-bits (or similar) is not supported.
*
* Note 1: The transmit command register should be initialized before enabling the LPSPI in slave mode, although
* the command register does not update until after the LPSPI is enabled. After it is enabled, the transmit command
* register
* should only be changed if the LPSPI is idle.
*
* Note 2: The transmit and command FIFO is a combined FIFO that includes both transmit data and command words. That
* means the TCR register should be written to when the Tx FIFO is not full.
*
* @param base LPSPI peripheral address.
* @param frameSize The frame size in number of bits.
*/
static inline void LPSPI_SetFrameSize(LPSPI_Type *base, uint32_t frameSize)
{
base->TCR = (base->TCR & ~LPSPI_TCR_FRAMESZ_MASK) | LPSPI_TCR_FRAMESZ(frameSize - 1);
}
/*!
* @brief Sets the LPSPI baud rate in bits per second.
*
* This function takes in the desired bitsPerSec (baud rate) and calculates the nearest
* possible baud rate without exceeding the desired baud rate and returns the
* calculated baud rate in bits-per-second. It requires the caller to provide
* the frequency of the module source clock (in Hertz). Note that the baud rate
* does not go into effect until the Transmit Control Register (TCR) is programmed
* with the prescale value. Hence, this function returns the prescale tcrPrescaleValue
* parameter for later programming in the TCR. The higher level
* peripheral driver should alert the user of an out of range baud rate input.
*
* Note that the LPSPI module must first be disabled before configuring this.
* Note that the LPSPI module must be configured for master mode before configuring this.
*
* @param base LPSPI peripheral address.
* @param baudRate_Bps The desired baud rate in bits per second.
* @param srcClock_Hz Module source input clock in Hertz.
* @param tcrPrescaleValue The TCR prescale value needed to program the TCR.
* @return The actual calculated baud rate. This function may also return a "0" if the
* LPSPI is not configured for master mode or if the LPSPI module is not disabled.
*/
uint32_t LPSPI_MasterSetBaudRate(LPSPI_Type *base,
uint32_t baudRate_Bps,
uint32_t srcClock_Hz,
uint32_t *tcrPrescaleValue);
/*!
* @brief Manually configures a specific LPSPI delay parameter (module must be disabled to
* change the delay values).
*
* This function configures the following:
* SCK to PCS delay, or
* PCS to SCK delay, or
* The configurations must occur between the transfer delay.
*
* The delay names are available in type lpspi_delay_type_t.
*
* The user passes the desired delay along with the delay value.
* This allows the user to directly set the delay values if they have
* pre-calculated them or if they simply wish to manually increment the value.
*
* Note that the LPSPI module must first be disabled before configuring this.
* Note that the LPSPI module must be configured for master mode before configuring this.
*
* @param base LPSPI peripheral address.
* @param scaler The 8-bit delay value 0x00 to 0xFF (255).
* @param whichDelay The desired delay to configure, must be of type lpspi_delay_type_t.
*/
void LPSPI_MasterSetDelayScaler(LPSPI_Type *base, uint32_t scaler, lpspi_delay_type_t whichDelay);
/*!
* @brief Calculates the delay based on the desired delay input in nanoseconds (module must be
* disabled to change the delay values).
*
* This function calculates the values for the following:
* SCK to PCS delay, or
* PCS to SCK delay, or
* The configurations must occur between the transfer delay.
*
* The delay names are available in type lpspi_delay_type_t.
*
* The user passes the desired delay and the desired delay value in
* nano-seconds. The function calculates the value needed for the desired delay parameter
* and returns the actual calculated delay because an exact delay match may not be possible. In this
* case, the closest match is calculated without going below the desired delay value input.
* It is possible to input a very large delay value that exceeds the capability of the part, in
* which case the maximum supported delay is returned. It is up to the higher level
* peripheral driver to alert the user of an out of range delay input.
*
* Note that the LPSPI module must be configured for master mode before configuring this. And note that
* the delayTime = LPSPI_clockSource / (PRESCALE * Delay_scaler).
*
* @param base LPSPI peripheral address.
* @param delayTimeInNanoSec The desired delay value in nano-seconds.
* @param whichDelay The desired delay to configuration, which must be of type lpspi_delay_type_t.
* @param srcClock_Hz Module source input clock in Hertz.
* @return actual Calculated delay value in nano-seconds.
*/
uint32_t LPSPI_MasterSetDelayTimes(LPSPI_Type *base,
uint32_t delayTimeInNanoSec,
lpspi_delay_type_t whichDelay,
uint32_t srcClock_Hz);
/*!
* @brief Writes data into the transmit data buffer.
*
* This function writes data passed in by the user to the Transmit Data Register (TDR).
* The user can pass up to 32-bits of data to load into the TDR. If the frame size exceeds 32-bits,
* the user has to manage sending the data one 32-bit word at a time.
* Any writes to the TDR result in an immediate push to the transmit FIFO.
* This function can be used for either master or slave modes.
*
* @param base LPSPI peripheral address.
* @param data The data word to be sent.
*/
static inline void LPSPI_WriteData(LPSPI_Type *base, uint32_t data)
{
base->TDR = data;
}
/*!
* @brief Reads data from the data buffer.
*
* This function reads the data from the Receive Data Register (RDR).
* This function can be used for either master or slave mode.
*
* @param base LPSPI peripheral address.
* @return The data read from the data buffer.
*/
static inline uint32_t LPSPI_ReadData(LPSPI_Type *base)
{
return (base->RDR);
}
/*!
* @brief Set up the dummy data.
*
* @param base LPSPI peripheral address.
* @param dummyData Data to be transferred when tx buffer is NULL.
* Note:
* This API has no effect when LPSPI in slave interrupt mode, because driver
* will set the TXMSK bit to 1 if txData is NULL, no data is loaded from transmit
* FIFO and output pin is tristated.
*/
void LPSPI_SetDummyData(LPSPI_Type *base, uint8_t dummyData);
/*!
*@}
*/
/*!
* @name Transactional
* @{
*/
/*Transactional APIs*/
/*!
* @brief Initializes the LPSPI master handle.
*
* This function initializes the LPSPI handle, which can be used for other LPSPI transactional APIs. Usually, for a
* specified LPSPI instance, call this API once to get the initialized handle.
* @param base LPSPI peripheral address.
* @param handle LPSPI handle pointer to lpspi_master_handle_t.
* @param callback DSPI callback.
* @param userData callback function parameter.
*/
void LPSPI_MasterTransferCreateHandle(LPSPI_Type *base,
lpspi_master_handle_t *handle,
lpspi_master_transfer_callback_t callback,
void *userData);
/*!
* @brief LPSPI master transfer data using a polling method.
*
* This function transfers data using a polling method. This is a blocking function, which does not return until all
* transfers have been
* completed.
*
* Note:
* The transfer data size should be integer multiples of bytesPerFrame if bytesPerFrame is less than or equal to 4.
* For bytesPerFrame greater than 4:
* The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not integer multiples of 4.
* Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.
*
* @param base LPSPI peripheral address.
* @param transfer pointer to lpspi_transfer_t structure.
* @return status of status_t.
*/
status_t LPSPI_MasterTransferBlocking(LPSPI_Type *base, lpspi_transfer_t *transfer);
/*!
* @brief LPSPI master transfer data using an interrupt method.
*
* This function transfers data using an interrupt method. This is a non-blocking function, which returns right away.
* When all data
* is transferred, the callback function is called.
*
* Note:
* The transfer data size should be integer multiples of bytesPerFrame if bytesPerFrame is less than or equal to 4.
* For bytesPerFrame greater than 4:
* The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not integer multiples of 4.
* Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.
*
* @param base LPSPI peripheral address.
* @param handle pointer to lpspi_master_handle_t structure which stores the transfer state.
* @param transfer pointer to lpspi_transfer_t structure.
* @return status of status_t.
*/
status_t LPSPI_MasterTransferNonBlocking(LPSPI_Type *base, lpspi_master_handle_t *handle, lpspi_transfer_t *transfer);
/*!
* @brief Gets the master transfer remaining bytes.
*
* This function gets the master transfer remaining bytes.
*
* @param base LPSPI peripheral address.
* @param handle pointer to lpspi_master_handle_t structure which stores the transfer state.
* @param count Number of bytes transferred so far by the non-blocking transaction.
* @return status of status_t.
*/
status_t LPSPI_MasterTransferGetCount(LPSPI_Type *base, lpspi_master_handle_t *handle, size_t *count);
/*!
* @brief LPSPI master abort transfer which uses an interrupt method.
*
* This function aborts a transfer which uses an interrupt method.
*
* @param base LPSPI peripheral address.
* @param handle pointer to lpspi_master_handle_t structure which stores the transfer state.
*/
void LPSPI_MasterTransferAbort(LPSPI_Type *base, lpspi_master_handle_t *handle);
/*!
* @brief LPSPI Master IRQ handler function.
*
* This function processes the LPSPI transmit and receive IRQ.
*
* @param base LPSPI peripheral address.
* @param handle pointer to lpspi_master_handle_t structure which stores the transfer state.
*/
void LPSPI_MasterTransferHandleIRQ(LPSPI_Type *base, lpspi_master_handle_t *handle);
/*!
* @brief Initializes the LPSPI slave handle.
*
* This function initializes the LPSPI handle, which can be used for other LPSPI transactional APIs. Usually, for a
* specified LPSPI instance, call this API once to get the initialized handle.
*
* @param base LPSPI peripheral address.
* @param handle LPSPI handle pointer to lpspi_slave_handle_t.
* @param callback DSPI callback.
* @param userData callback function parameter.
*/
void LPSPI_SlaveTransferCreateHandle(LPSPI_Type *base,
lpspi_slave_handle_t *handle,
lpspi_slave_transfer_callback_t callback,
void *userData);
/*!
* @brief LPSPI slave transfer data using an interrupt method.
*
* This function transfer data using an interrupt method. This is a non-blocking function, which returns right away.
* When all data
* is transferred, the callback function is called.
*
* Note:
* The transfer data size should be integer multiples of bytesPerFrame if bytesPerFrame is less than or equal to 4.
* For bytesPerFrame greater than 4:
* The transfer data size should be equal to bytesPerFrame if the bytesPerFrame is not an integer multiple of 4.
* Otherwise, the transfer data size can be an integer multiple of bytesPerFrame.
*
* @param base LPSPI peripheral address.
* @param handle pointer to lpspi_slave_handle_t structure which stores the transfer state.
* @param transfer pointer to lpspi_transfer_t structure.
* @return status of status_t.
*/
status_t LPSPI_SlaveTransferNonBlocking(LPSPI_Type *base, lpspi_slave_handle_t *handle, lpspi_transfer_t *transfer);
/*!
* @brief Gets the slave transfer remaining bytes.
*
* This function gets the slave transfer remaining bytes.
*
* @param base LPSPI peripheral address.
* @param handle pointer to lpspi_slave_handle_t structure which stores the transfer state.
* @param count Number of bytes transferred so far by the non-blocking transaction.
* @return status of status_t.
*/
status_t LPSPI_SlaveTransferGetCount(LPSPI_Type *base, lpspi_slave_handle_t *handle, size_t *count);
/*!
* @brief LPSPI slave aborts a transfer which uses an interrupt method.
*
* This function aborts a transfer which uses an interrupt method.
*
* @param base LPSPI peripheral address.
* @param handle pointer to lpspi_slave_handle_t structure which stores the transfer state.
*/
void LPSPI_SlaveTransferAbort(LPSPI_Type *base, lpspi_slave_handle_t *handle);
/*!
* @brief LPSPI Slave IRQ handler function.
*
* This function processes the LPSPI transmit and receives an IRQ.
*
* @param base LPSPI peripheral address.
* @param handle pointer to lpspi_slave_handle_t structure which stores the transfer state.
*/
void LPSPI_SlaveTransferHandleIRQ(LPSPI_Type *base, lpspi_slave_handle_t *handle);
/*!
*@}
*/
#if defined(__cplusplus)
}
#endif /*_cplusplus*/
/*!
*@}
*/
#endif /*_FSL_LPSPI_H_*/
View Git Blame Copy Permalink