324 lines
10 KiB
C
324 lines
10 KiB
C
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2017-01-01 Urey first version
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
|
|
#include <stdint.h>
|
|
#include <core_ck802.h>
|
|
|
|
/* flag in interrupt handling */
|
|
rt_uint32_t rt_interrupt_from_thread, rt_interrupt_to_thread;
|
|
rt_uint32_t rt_thread_switch_interrupt_flag;
|
|
|
|
/*******************************************************************************
|
|
* Hardware Abstraction Layer
|
|
Core Function Interface contains:
|
|
- Core VIC Functions
|
|
- Core CORET Functions
|
|
- Core Register Access Functions
|
|
******************************************************************************/
|
|
/**
|
|
\defgroup CSI_Core_FunctionInterface Functions and Instructions Reference
|
|
*/
|
|
|
|
/* ########################## NVIC functions #################################### */
|
|
/**
|
|
\ingroup CSI_Core_FunctionInterface
|
|
\defgroup CSI_Core_NVICFunctions NVIC Functions
|
|
\brief Functions that manage interrupts and exceptions via the NVIC.
|
|
@{
|
|
*/
|
|
|
|
/* Interrupt Priorities are WORD accessible only under CSKYv6M */
|
|
/* The following MACROS handle generation of the register offset and byte masks */
|
|
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
|
|
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
|
|
|
|
static uint32_t s_nvic_prio_bits = __NVIC_PRIO_BITS;
|
|
|
|
/**
|
|
\brief initialize the NVIC interrupt controller
|
|
\param [in] prio_bits the priority bits of NVIC interrupt controller.
|
|
*/
|
|
void drv_nvic_init(uint32_t prio_bits)
|
|
{
|
|
if (s_nvic_prio_bits >= 8U)
|
|
{
|
|
return;
|
|
}
|
|
|
|
s_nvic_prio_bits = prio_bits;
|
|
}
|
|
|
|
/**
|
|
\brief Enable External Interrupt
|
|
\details Enables a device-specific interrupt in the NVIC interrupt controller.
|
|
\param [in] IRQn External interrupt number. Value cannot be negative.
|
|
*/
|
|
void drv_nvic_enable_irq(int32_t IRQn)
|
|
{
|
|
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
|
|
#ifdef CONFIG_SYSTEM_SECURE
|
|
NVIC->ISSR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
\brief Disable External Interrupt
|
|
\details Disables a device-specific interrupt in the NVIC interrupt controller.
|
|
\param [in] IRQn External interrupt number. Value cannot be negative.
|
|
*/
|
|
void drv_nvic_disable_irq(int32_t IRQn)
|
|
{
|
|
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
|
|
}
|
|
|
|
/**
|
|
\brief Enable External Secure Interrupt
|
|
\details Enables a secure device-specific interrupt in the NVIC interrupt controller.
|
|
\param [in] IRQn External interrupt number. Value cannot be negative.
|
|
*/
|
|
void drv_nvic_enable_sirq(int32_t IRQn)
|
|
{
|
|
NVIC->ISSR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
|
|
}
|
|
|
|
/**
|
|
\brief Get Pending Interrupt
|
|
\details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
|
|
\param [in] IRQn Interrupt number.
|
|
\return 0 Interrupt status is not pending.
|
|
\return 1 Interrupt status is pending.
|
|
*/
|
|
uint32_t drv_nvic_get_pending_irq(int32_t IRQn)
|
|
{
|
|
return ((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
|
}
|
|
|
|
/**
|
|
\brief Set Pending Interrupt
|
|
\details Sets the pending bit of an external interrupt.
|
|
\param [in] IRQn Interrupt number. Value cannot be negative.
|
|
*/
|
|
void drv_nvic_set_pending_irq(int32_t IRQn)
|
|
{
|
|
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
|
|
}
|
|
|
|
/**
|
|
\brief Clear Pending Interrupt
|
|
\details Clears the pending bit of an external interrupt.
|
|
\param [in] IRQn External interrupt number. Value cannot be negative.
|
|
*/
|
|
void drv_nvic_clear_pending_irq(int32_t IRQn)
|
|
{
|
|
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
|
|
}
|
|
|
|
/**
|
|
\brief Get Wake up Interrupt
|
|
\details Reads the wake up register in the NVIC and returns the pending bit for the specified interrupt.
|
|
\param [in] IRQn Interrupt number.
|
|
\return 0 Interrupt is not set as wake up interrupt.
|
|
\return 1 Interrupt is set as wake up interrupt.
|
|
*/
|
|
uint32_t drv_nvic_get_wakeup_irq(int32_t IRQn)
|
|
{
|
|
return ((uint32_t)(((NVIC->IWER[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
|
}
|
|
|
|
/**
|
|
\brief Set Wake up Interrupt
|
|
\details Sets the wake up bit of an external interrupt.
|
|
\param [in] IRQn Interrupt number. Value cannot be negative.
|
|
*/
|
|
void drv_nvic_set_wakeup_irq(int32_t IRQn)
|
|
{
|
|
NVIC->IWER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
|
|
}
|
|
|
|
/**
|
|
\brief Clear Wake up Interrupt
|
|
\details Clears the wake up bit of an external interrupt.
|
|
\param [in] IRQn External interrupt number. Value cannot be negative.
|
|
*/
|
|
void drv_nvic_clear_wakeup_irq(int32_t IRQn)
|
|
{
|
|
NVIC->IWDR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
|
|
}
|
|
|
|
/**
|
|
\brief Get Active Interrupt
|
|
\details Reads the active register in the NVIC and returns the active bit for the device specific interrupt.
|
|
\param [in] IRQn Device specific interrupt number.
|
|
\return 0 Interrupt status is not active.
|
|
\return 1 Interrupt status is active.
|
|
\note IRQn must not be negative.
|
|
*/
|
|
uint32_t drv_nvic_get_active(int32_t IRQn)
|
|
{
|
|
return ((uint32_t)(((NVIC->IABR[0] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
|
}
|
|
|
|
/**
|
|
\brief Set Threshold register
|
|
\details set the threshold register in the NVIC.
|
|
\param [in] VectThreshold specific vecter threshold.
|
|
\param [in] PrioThreshold specific priority threshold.
|
|
*/
|
|
void drv_nvic_set_threshold(uint32_t VectThreshold, uint32_t PrioThreshold)
|
|
{
|
|
NVIC->IPTR = 0x80000000 | (((VectThreshold + 32) & 0xFF) << 8) | ((PrioThreshold & 0x3) << 6);
|
|
}
|
|
|
|
/**
|
|
\brief Set Interrupt Priority
|
|
\details Sets the priority of an interrupt.
|
|
\note The priority cannot be set for every core interrupt.
|
|
\param [in] IRQn Interrupt number.
|
|
\param [in] priority Priority to set.
|
|
*/
|
|
void drv_nvic_set_prio(int32_t IRQn, uint32_t priority)
|
|
{
|
|
NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
|
(((priority << (8U - s_nvic_prio_bits)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
|
}
|
|
|
|
/**
|
|
\brief Get Interrupt Priority
|
|
\details Reads the priority of an interrupt.
|
|
The interrupt number can be positive to specify an external (device specific) interrupt,
|
|
or negative to specify an internal (core) interrupt.
|
|
\param [in] IRQn Interrupt number.
|
|
\return Interrupt Priority.
|
|
Value is aligned automatically to the implemented priority bits of the microcontroller.
|
|
*/
|
|
uint32_t drv_nvic_get_prio(int32_t IRQn)
|
|
{
|
|
return ((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn)) & (uint32_t)0xFFUL) >> (8U - s_nvic_prio_bits)));
|
|
}
|
|
|
|
|
|
/*@} end of CSI_Core_NVICFunctions */
|
|
|
|
/* ################################## SysTick function ############################################ */
|
|
/**
|
|
\ingroup CSI_Core_FunctionInterface
|
|
\defgroup CSI_Core_SysTickFunctions SysTick Functions
|
|
\brief Functions that configure the System.
|
|
@{
|
|
*/
|
|
|
|
|
|
/**
|
|
\brief CORE timer Configuration
|
|
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
|
|
Counter is in free running mode to generate periodic interrupts.
|
|
\param [in] ticks Number of ticks between two interrupts.
|
|
\param [in] IRQn core timer Interrupt number.
|
|
\return 0 Function succeeded.
|
|
\return 1 Function failed.
|
|
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
|
|
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
|
|
must contain a vendor-specific implementation of this function.
|
|
*/
|
|
uint32_t drv_coret_config(uint32_t ticks, int32_t IRQn)
|
|
{
|
|
if ((ticks - 1UL) > CORET_LOAD_RELOAD_Msk)
|
|
{
|
|
return (1UL); /* Reload value impossible */
|
|
}
|
|
|
|
CORET->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
|
|
drv_nvic_set_prio(IRQn, (1UL << s_nvic_prio_bits) - 1UL); /* set Priority for Systick Interrupt */
|
|
CORET->VAL = 0UL; /* Load the CORET Counter Value */
|
|
CORET->CTRL = CORET_CTRL_CLKSOURCE_Msk |
|
|
CORET_CTRL_TICKINT_Msk |
|
|
CORET_CTRL_ENABLE_Msk; /* Enable CORET IRQ and CORET Timer */
|
|
return (0UL); /* Function successful */
|
|
}
|
|
|
|
/**
|
|
\brief get CORE timer reload value
|
|
\return CORE timer counter value.
|
|
*/
|
|
uint32_t drv_coret_get_load(void)
|
|
{
|
|
return CORET->LOAD;
|
|
}
|
|
|
|
/**
|
|
\brief get CORE timer counter value
|
|
\return CORE timer counter value.
|
|
*/
|
|
uint32_t drv_coret_get_value(void)
|
|
{
|
|
return CORET->VAL;
|
|
}
|
|
|
|
/*@} end of CSI_Core_SysTickFunctions */
|
|
|
|
#if 0
|
|
/* ##################################### DCC function ########################################### */
|
|
/**
|
|
\ingroup CSI_Core_FunctionInterface
|
|
\defgroup CSI_core_DebugFunctions HAD Functions
|
|
\brief Functions that access the HAD debug interface.
|
|
@{
|
|
*/
|
|
|
|
/**
|
|
\brief HAD Send Character
|
|
\details Transmits a character via the HAD channel 0, and
|
|
\li Just returns when no debugger is connected that has booked the output.
|
|
\li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
|
|
\param [in] ch Character to transmit.
|
|
\returns Character to transmit.
|
|
*/
|
|
uint32_t HAD_SendChar(uint32_t ch)
|
|
{
|
|
DCC->DERJR = (uint8_t)ch;
|
|
|
|
return (ch);
|
|
}
|
|
|
|
|
|
/**
|
|
\brief HAD Receive Character
|
|
\details Inputs a character via the external variable \ref HAD_RxBuffer.
|
|
\return Received character.
|
|
\return -1 No character pending.
|
|
*/
|
|
int32_t HAD_ReceiveChar(void)
|
|
{
|
|
int32_t ch = -1; /* no character available */
|
|
|
|
if (_FLD2VAL(DCC_EHSR_JW, DCC->EHSR))
|
|
{
|
|
ch = DCC->DERJW;
|
|
}
|
|
|
|
return (ch);
|
|
}
|
|
|
|
/**
|
|
\brief HAD Check Character
|
|
\details Checks whether a character is pending for reading in the variable \ref HAD_RxBuffer.
|
|
\return 0 No character available.
|
|
\return 1 Character available.
|
|
*/
|
|
int32_t HAD_CheckChar(void)
|
|
{
|
|
return _FLD2VAL(DCC_EHSR_JW, DCC->EHSR); /* no character available */
|
|
}
|
|
|
|
#endif
|