rt-thread-official/bsp/tms320f28379d/libraries/headers/include/F2837xD_upp.h

404 lines
18 KiB
C

//###########################################################################
//
// FILE: F2837xD_upp.h
//
// TITLE: UPP Register Definitions.
//
//###########################################################################
// $TI Release: F2837xD Support Library v3.05.00.00 $
// $Release Date: Tue Jun 26 03:15:23 CDT 2018 $
// $Copyright:
// Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// $
//###########################################################################
#ifndef __F2837xD_UPP_H__
#define __F2837xD_UPP_H__
#ifdef __cplusplus
extern "C" {
#endif
//---------------------------------------------------------------------------
// UPP Individual Register Bit Definitions:
struct PERCTL_BITS { // bits description
Uint16 FREE:1; // 0 Emulation control.
Uint16 SOFT:1; // 1 Emulation control.
Uint16 RTEMU:1; // 2 Realtime emulation control.
Uint16 PEREN:1; // 3 Peripheral Enable
Uint16 SOFTRST:1; // 4 Software Reset
Uint16 rsvd1:2; // 6:5 Reserved
Uint16 DMAST:1; // 7 DMA Burst transaction status
Uint16 rsvd2:8; // 15:8 Reserved
Uint16 rsvd3:16; // 31:16 Reserved
};
union PERCTL_REG {
Uint32 all;
struct PERCTL_BITS bit;
};
struct CHCTL_BITS { // bits description
Uint16 MODE:2; // 1:0 Operating mode
Uint16 rsvd1:1; // 2 Reserved
Uint16 SDRTXILA:1; // 3 SDR TX Interleve mode
Uint16 DEMUXA:1; // 4 DDR de-multiplexing mode
Uint16 rsvd2:11; // 15:5 Reserved
Uint16 DRA:1; // 16 Data rate
Uint16 rsvd3:14; // 30:17 Reserved
Uint16 rsvd4:1; // 31 Reserved
};
union CHCTL_REG {
Uint32 all;
struct CHCTL_BITS bit;
};
struct IFCFG_BITS { // bits description
Uint16 STARTPOLA:1; // 0 Polarity of START(SELECT) signal
Uint16 ENAPOLA:1; // 1 Polarity of ENABLE(WRITE) signal
Uint16 WAITPOLA:1; // 2 Polarity of WAIT signal.
Uint16 STARTA:1; // 3 Enable Usage of START (SELECT) signal
Uint16 ENAA:1; // 4 Enable Usage of ENABLE (WRITE) signal
Uint16 WAITA:1; // 5 Enable Usage of WAIT signal
Uint16 rsvd1:2; // 7:6 Reserved
Uint16 CLKDIVA:4; // 11:8 Clock divider for tx mode
Uint16 CLKINVA:1; // 12 Clock inversion
Uint16 TRISENA:1; // 13 Pin Tri-state Control
Uint16 rsvd2:2; // 15:14 Reserved
Uint16 rsvd3:6; // 21:16 Reserved
Uint16 rsvd4:2; // 23:22 Reserved
Uint16 rsvd5:6; // 29:24 Reserved
Uint16 rsvd6:2; // 31:30 Reserved
};
union IFCFG_REG {
Uint32 all;
struct IFCFG_BITS bit;
};
struct IFIVAL_BITS { // bits description
Uint16 VALA:9; // 8:0 Idle Value
Uint16 rsvd1:7; // 15:9 Reserved
Uint16 rsvd2:16; // 31:16 Reserved
};
union IFIVAL_REG {
Uint32 all;
struct IFIVAL_BITS bit;
};
struct THCFG_BITS { // bits description
Uint16 RDSIZEI:2; // 1:0 DMA Read Threshold for DMA Channel I
Uint16 rsvd1:6; // 7:2 Reserved
Uint16 RDSIZEQ:2; // 9:8 DMA Read Threshold for DMA Channel Q
Uint16 rsvd2:6; // 15:10 Reserved
Uint16 TXSIZEA:2; // 17:16 I/O Transmit Threshold Value
Uint16 rsvd3:6; // 23:18 Reserved
Uint16 rsvd4:2; // 25:24 Reserved
Uint16 rsvd5:6; // 31:26 Reserved
};
union THCFG_REG {
Uint32 all;
struct THCFG_BITS bit;
};
struct RAWINTST_BITS { // bits description
Uint16 DPEI:1; // 0 Interrupt raw status for DMA programming error
Uint16 UOEI:1; // 1 Interrupt raw status for DMA under-run or over-run
Uint16 rsvd1:1; // 2 Reserved
Uint16 EOWI:1; // 3 Interrupt raw status for end-of window condition
Uint16 EOLI:1; // 4 Interrupt raw status for end-of-line condition
Uint16 rsvd2:3; // 7:5 Reserved
Uint16 DPEQ:1; // 8 Interrupt raw status for DMA programming error
Uint16 UOEQ:1; // 9 Interrupt raw status for DMA under-run or over-run
Uint16 rsvd3:1; // 10 Reserved
Uint16 EOWQ:1; // 11 Interrupt raw status for end-of window condition
Uint16 EOLQ:1; // 12 Interrupt raw status for end-of-line condition
Uint16 rsvd4:3; // 15:13 Reserved
Uint16 rsvd5:16; // 31:16 Reserved
};
union RAWINTST_REG {
Uint32 all;
struct RAWINTST_BITS bit;
};
struct ENINTST_BITS { // bits description
Uint16 DPEI:1; // 0 Interrupt enable status for DMA programming error
Uint16 UOEI:1; // 1 Interrupt enable status for DMA under-run or over-run
Uint16 rsvd1:1; // 2 Reserved
Uint16 EOWI:1; // 3 Interrupt enable status for end-of window condition
Uint16 EOLI:1; // 4 Interrupt enable status for end-of-line condition
Uint16 rsvd2:3; // 7:5 Reserved
Uint16 DPEQ:1; // 8 Interrupt enable status for DMA programming error
Uint16 UOEQ:1; // 9 Interrupt enable status for DMA under-run or over-run
Uint16 rsvd3:1; // 10 Reserved
Uint16 EOWQ:1; // 11 Interrupt enable status for end-of window condition
Uint16 EOLQ:1; // 12 Interrupt enable status for end-of-line condition
Uint16 rsvd4:3; // 15:13 Reserved
Uint16 rsvd5:16; // 31:16 Reserved
};
union ENINTST_REG {
Uint32 all;
struct ENINTST_BITS bit;
};
struct INTENSET_BITS { // bits description
Uint16 DPEI:1; // 0 Interrupt enable for DMA programming error
Uint16 UOEI:1; // 1 Interrupt enable for DMA under-run or over-run
Uint16 rsvd1:1; // 2 Reserved
Uint16 EOWI:1; // 3 Interrupt enable for end-of window condition
Uint16 EOLI:1; // 4 Interrupt enable for end-of-line condition
Uint16 rsvd2:3; // 7:5 Reserved
Uint16 DPEQ:1; // 8 Interrupt enable for DMA programming error
Uint16 UOEQ:1; // 9 Interrupt enable for DMA under-run or over-run
Uint16 rsvd3:1; // 10 Reserved
Uint16 EOWQ:1; // 11 Interrupt enable for end-of window condition
Uint16 EOLQ:1; // 12 Interrupt enable for end-of-line condition
Uint16 rsvd4:3; // 15:13 Reserved
Uint16 rsvd5:16; // 31:16 Reserved
};
union INTENSET_REG {
Uint32 all;
struct INTENSET_BITS bit;
};
struct INTENCLR_BITS { // bits description
Uint16 DPEI:1; // 0 Interrupt clear for DMA programming error
Uint16 UOEI:1; // 1 Interrupt clear for DMA under-run or over-run
Uint16 rsvd1:1; // 2 Reserved
Uint16 EOWI:1; // 3 Interrupt clear for end-of window condition
Uint16 EOLI:1; // 4 Interrupt clear for end-of-line condition
Uint16 rsvd2:3; // 7:5 Reserved
Uint16 DPEQ:1; // 8 Interrupt clear for DMA programming error
Uint16 UOEQ:1; // 9 Interrupt clear for DMA under-run or over-run
Uint16 rsvd3:1; // 10 Reserved
Uint16 EOWQ:1; // 11 Interrupt clear for end-of window condition
Uint16 EOLQ:1; // 12 Interrupt clear for end-of-line condition
Uint16 rsvd4:3; // 15:13 Reserved
Uint16 rsvd5:16; // 31:16 Reserved
};
union INTENCLR_REG {
Uint32 all;
struct INTENCLR_BITS bit;
};
struct CHIDESC1_BITS { // bits description
Uint16 BCNT:16; // 15:0 Number of bytes in a line for DMA Channel I transfer.
Uint16 LCNT:16; // 31:16 Number of lines in a window for DMA Channel I transfer.
};
union CHIDESC1_REG {
Uint32 all;
struct CHIDESC1_BITS bit;
};
struct CHIDESC2_BITS { // bits description
Uint16 LOFFSET:16; // 15:0 Current start address to next start address offset.
Uint16 rsvd1:16; // 31:16 Reserved
};
union CHIDESC2_REG {
Uint32 all;
struct CHIDESC2_BITS bit;
};
struct CHIST1_BITS { // bits description
Uint16 BCNT:16; // 15:0 Current byte number.
Uint16 LCNT:16; // 31:16 Current line number.
};
union CHIST1_REG {
Uint32 all;
struct CHIST1_BITS bit;
};
struct CHIST2_BITS { // bits description
Uint16 ACT:1; // 0 Status of DMA descriptor.
Uint16 PEND:1; // 1 Status of DMA.
Uint16 rsvd1:2; // 3:2 Reserved
Uint16 WM:4; // 7:4 Watermark for FIFO block count for DMA Channel I tranfer.
Uint16 rsvd2:8; // 15:8 Reserved
Uint16 rsvd3:16; // 31:16 Reserved
};
union CHIST2_REG {
Uint32 all;
struct CHIST2_BITS bit;
};
struct CHQDESC1_BITS { // bits description
Uint16 BCNT:16; // 15:0 Number of bytes in a line for DMA Channel Q transfer.
Uint16 LCNT:16; // 31:16 Number of lines in a window for DMA Channel Q transfer.
};
union CHQDESC1_REG {
Uint32 all;
struct CHQDESC1_BITS bit;
};
struct CHQDESC2_BITS { // bits description
Uint16 LOFFSET:16; // 15:0 Current start address to next start address offset.
Uint16 rsvd1:16; // 31:16 Reserved
};
union CHQDESC2_REG {
Uint32 all;
struct CHQDESC2_BITS bit;
};
struct CHQST1_BITS { // bits description
Uint16 BCNT:16; // 15:0 Current byte number.
Uint16 LCNT:16; // 31:16 Current line number.
};
union CHQST1_REG {
Uint32 all;
struct CHQST1_BITS bit;
};
struct CHQST2_BITS { // bits description
Uint16 ACT:1; // 0 Status of DMA descriptor.
Uint16 PEND:1; // 1 Status of DMA.
Uint16 rsvd1:2; // 3:2 Reserved
Uint16 WM:4; // 7:4 Watermark for FIFO block count for DMA Channel Q tranfer.
Uint16 rsvd2:8; // 15:8 Reserved
Uint16 rsvd3:16; // 31:16 Reserved
};
union CHQST2_REG {
Uint32 all;
struct CHQST2_BITS bit;
};
struct GINTEN_BITS { // bits description
Uint16 GINTEN:1; // 0 Global Interrupt Enable
Uint16 rsvd1:15; // 15:1 Reserved
Uint16 rsvd2:16; // 31:16 Reserved
};
union GINTEN_REG {
Uint32 all;
struct GINTEN_BITS bit;
};
struct GINTFLG_BITS { // bits description
Uint16 GINTFLG:1; // 0 Global Interrupt Flag
Uint16 rsvd1:15; // 15:1 Reserved
Uint16 rsvd2:16; // 31:16 Reserved
};
union GINTFLG_REG {
Uint32 all;
struct GINTFLG_BITS bit;
};
struct GINTCLR_BITS { // bits description
Uint16 GINTCLR:1; // 0 Global Interrupt Clear
Uint16 rsvd1:15; // 15:1 Reserved
Uint16 rsvd2:16; // 31:16 Reserved
};
union GINTCLR_REG {
Uint32 all;
struct GINTCLR_BITS bit;
};
struct DLYCTL_BITS { // bits description
Uint16 DLYDIS:1; // 0 IO dealy control disable.
Uint16 DLYCTL:2; // 2:1 IO delay control.
Uint16 rsvd1:13; // 15:3 Reserved
Uint16 rsvd2:16; // 31:16 Reserved
};
union DLYCTL_REG {
Uint32 all;
struct DLYCTL_BITS bit;
};
struct UPP_REGS {
Uint32 PID; // Peripheral ID Register
union PERCTL_REG PERCTL; // Peripheral Control Register
Uint16 rsvd1[4]; // Reserved
union CHCTL_REG CHCTL; // General Control Register
union IFCFG_REG IFCFG; // Interface Configuration Register
union IFIVAL_REG IFIVAL; // Interface Idle Value Register
union THCFG_REG THCFG; // Threshold Configuration Register
union RAWINTST_REG RAWINTST; // Raw Interrupt Status Register
union ENINTST_REG ENINTST; // Enable Interrupt Status Register
union INTENSET_REG INTENSET; // Interrupt Enable Set Register
union INTENCLR_REG INTENCLR; // Interrupt Enable Clear Register
Uint16 rsvd2[8]; // Reserved
Uint32 CHIDESC0; // DMA Channel I Descriptor 0 Register
union CHIDESC1_REG CHIDESC1; // DMA Channel I Descriptor 1 Register
union CHIDESC2_REG CHIDESC2; // DMA Channel I Descriptor 2 Register
Uint16 rsvd3[2]; // Reserved
Uint32 CHIST0; // DMA Channel I Status 0 Register
union CHIST1_REG CHIST1; // DMA Channel I Status 1 Register
union CHIST2_REG CHIST2; // DMA Channel I Status 2 Register
Uint16 rsvd4[2]; // Reserved
Uint32 CHQDESC0; // DMA Channel Q Descriptor 0 Register
union CHQDESC1_REG CHQDESC1; // DMA Channel Q Descriptor 1 Register
union CHQDESC2_REG CHQDESC2; // DMA Channel Q Descriptor 2 Register
Uint16 rsvd5[2]; // Reserved
Uint32 CHQST0; // DMA Channel Q Status 0 Register
union CHQST1_REG CHQST1; // DMA Channel Q Status 1 Register
union CHQST2_REG CHQST2; // DMA Channel Q Status 2 Register
Uint16 rsvd6[2]; // Reserved
union GINTEN_REG GINTEN; // Global Peripheral Interrupt Enable Register
union GINTFLG_REG GINTFLG; // Global Peripheral Interrupt Flag Register
union GINTCLR_REG GINTCLR; // Global Peripheral Interrupt Clear Register
union DLYCTL_REG DLYCTL; // IO clock data skew control Register
};
//---------------------------------------------------------------------------
// UPP External References & Function Declarations:
//
#ifdef CPU1
extern volatile struct UPP_REGS UppRegs;
#endif
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif
//===========================================================================
// End of file.
//===========================================================================