rt-thread-official/bsp/gkipc/libraries/drv/710X/gd/inc/gd_ethernet.h

406 lines
14 KiB
C

/*!
*****************************************************************************
** \file gd_lib/GK7101/inc/gd_ethernet.h
**
** \version 2.0
**
** \date Sept 09, 2014
**
** \author Steven Yu
**
** \brief Ethernet Driver.
**
** This application allows testing of the ethernet function.
**
** \attention THIS SAMPLE CODE IS PROVIDED AS IS. GOKE MICROELECTRONICS
** ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
** OMMISSIONS.
**
** (C) Copyright 2002 - 2014 by Goke Microelectronics Shanghai WSC
**
*******************************************************************************
*/
//#define PRINT_ETH_LOG
#ifndef _GD_ETHERNET_H_
#define _GD_ETHERNET_H_
#include "gtypes.h"
#include <gmodids.h>
#include "gd_gpio.h"
//*****************************************************************************
//*****************************************************************************
//** Defines and Macros
//*****************************************************************************
//*****************************************************************************
/* Length of Ethernet Mac address in bytes (Do NOT change) */
#define GD_ETH_MAC_ADDR_NUM (6)
typedef U8 GD_ETH_MacT[GD_ETH_MAC_ADDR_NUM];
#define GD_ETH_IP_ADDR_NUM (4)
typedef U8 GD_ETH_IpT[GD_ETH_IP_ADDR_NUM];
#define GD_ETH_ERR_BASE (GD_ETH_MODULE_ID << 16)
//*****************************************************************************
//*****************************************************************************
//** Enumerated types
//*****************************************************************************
//*****************************************************************************
enum
{
GD_ERR_ETH_NOT_SUPPORTED = GD_ETH_ERR_BASE, //!< Device not supported.
GD_ERR_ETH_NOT_OPEN,
GD_ERR_ETH_PHY_NOT_EXIST,
GD_ERR_ETH_PHY_RW,
GD_ERR_ETH_PHY_OTHER,
GD_ERR_ETH_MAC_NOT_OK,
GD_ERR_ETH_LINK_DOWN,
GD_ERR_ETH_TB_OVER,
GD_ERR_ETH_NO_TD,
};
/*!
*************************************************************************
** \brief Version of Ethernet driver.
**
** This number consists of a \b major version number stored in bits
** 16 to 31 (upper word) and a \b minor version number stored in bits
** 0 to 15 (lower word).
** - The \b major number has to be increased when a parameter change
** occurs for the existing driver's API after its first release.
** - The \b minor number has to be increased when functions are added to
** the existing driver's API after its first release.
**
** \note This value has to be assigned to the \b version field of the
** GD_ETH_OpenParamsT structure.
*************************************************************************
*/
typedef enum
{
GD_ETH_VERSION = 0x00020000 //!< The current driver version
}GD_ETH_VersionE;
/*!
*************************************************************************
** \brief internal Or external PHY for Ethernet driver.
**
** Indicate speed setting.
** Used on GD_ETH_Open() and GD_ETH_GetStat()
*************************************************************************
*/
typedef enum
{
GD_ETH_PHY_INTERNAL = 0, //!<Enet MAC use internal PHY
GD_ETH_PHY_EXTERNAL_1, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_2, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_3, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_4, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_5, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_6, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_7, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_8, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_9, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_10, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_11, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_12, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_13, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_14, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_15, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_16, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_17, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_18, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_19, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_20, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_21, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_22, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_23, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_24, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_25, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_26, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_27, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_28, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_29, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_30, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_31, //!<Enet MAC use external PHY
GD_ETH_PHY_EXTERNAL_AUTO, //!<Enet MAC use external PHY
}GD_ETH_PHY_AddrE;
/*!
*************************************************************************
** \brief speed parameter for Ethernet driver.
**
** Indicate speed setting.
** Used on GD_ETH_Open() and GD_ETH_GetStat()
*************************************************************************
*/
typedef enum
{
GD_ETH_SPEED_AUTO = 0, //!< Auto-negotiation
GD_ETH_SPEED_10M = 10, //!< 10Mbps
GD_ETH_SPEED_100M = 100, //!< 100Mbps
GD_ETH_SPEED_1000M = 1000, //!< 1000Mbps
}GD_ETH_SpeedE;
/*!
*************************************************************************
** \brief duplex mode parameter for Ethernet driver.
**
** Indicate duplex mode setting.
** Used on GD_ETH_Open() and GD_ETH_GetStat()
*************************************************************************
*/
typedef enum
{
GD_ETH_HALF_DUPLEX = 0,//!< half-duplex mode
GD_ETH_FULL_DUPLEX = 1 //!< full-duplex mode
}GD_ETH_DuplexE;
/*!
*************************************************************************
** \brief local ethWorkMode.loop mode parameter for Ethernet driver.
**
** Indicate local ethWorkMode.loop mode setting.
** Used on GD_ETH_Open()
**
** \note local ethWorkMode.loop mode is for debug purpose. general applications
** should specify #GD_ETH_LOOP_OFF only.
*************************************************************************
*/
typedef enum
{
GD_ETH_LOOP_OFF = 0,//!< ethWorkMode.loop off
GD_ETH_LOOP_ON_MAC = 1,//!< ethWorkMode.loop on LAN(MAC) device
GD_ETH_LOOP_ON_PHY = 2 //!< ethWorkMode.loop on PHY device
}GD_ETH_LoopE;
/*!
*************************************************************************
** \brief link status parameter for Ethernet driver.
**
** Indicate link status.
** Used on GD_ETH_GetStat()
*************************************************************************
*/
typedef enum
{
GD_ETH_LINKDOWN = 0, //!< link is down
GD_ETH_LINKUP = 1, //!< link is up
GD_ETH_LINKUNKNOWN = 2 //!< link status is unknown
}GD_ETH_LinkE;
/*!
*************************************************************************
** \brief detailed error status for Ethernet driver.
**
** Indicate detailed error status.
** Used on GD_ETH_GetStat()
**
** \note It depends on ethernet hardware. So other values may
** be added in future version.
*************************************************************************
*/
typedef enum
{
GD_ETH_ERR_NONE = 0x00000000,//!< No error, normal running
GD_ETH_ERR_SW = 0x00000001,//!< Fatal error by software(bug)
GD_ETH_ERR_FATAL = 0x00000001,//!< Fatal error by software(bug)
GD_ETH_ERR_RX_BUS = 0x00000002,//!< Bus error in receiving
GD_ETH_ERR_RWT_MAX = 0x00000008,//!< Excessive Watchdog timeout error
GD_ETH_ERR_RX_BAND = 0x00000020,//!< Overflow error in receiving
GD_ETH_ERR_RX_CONFIG = 0x00000080,//!< Feature not supported (Jumbo frames)
GD_ETH_ERR_TX_BUS = 0x00000004,//!< Bus error in transmitting
GD_ETH_ERR_TJT_MAX = 0x00000010,//!< Excessive Jabber timeout error
GD_ETH_ERR_TX_BAND = 0x00000040,//!< Underflow error in transmitting
GD_ETH_ERR_TX_CONFIG = 0x00000100,//!< Feature not supported (Jumbo frames)
GD_ETH_ERR_LATE_COL = 0x00000200,//!< Excessive late collision error
}GD_ETH_ErrorE;
typedef enum
{
GD_ETH_UNINITIALIZE = 0x00000000,
GD_ETH_FATAL_ERROR = 0x00000001,
GD_ETH_UNKNOWN = 0x00000002,
GD_ETH_RX_RUN = 0x00000004,
GD_ETH_RX_SUSP_NOBUF = 0x00000008,
GD_ETH_RX_SUSP_HWERR = 0x00000010,
GD_ETH_RX_STOP = 0x00000020,
GD_ETH_RX_STOP_HWERR = 0x00000040,
GD_ETH_TX_RUN = 0x00000080,
GD_ETH_TX_SUSP_NODAT = 0x00000100,
GD_ETH_TX_SUSP_HWERR = 0x00000200,
GD_ETH_TX_STOP = 0x00000400,
GD_ETH_TX_STOP_HWERR = 0x00000800,
} GD_ETH_StatE;
typedef enum
{
GD_ETH_R = 0x00000001,
GD_ETH_W = 0x00000002,
GD_ETH_RW = 0x00000003
} GD_ETH_RWE;
/*!
*************************************************************************
** \brief Frame end flag for Ethernet driver.
**
** Indicate whether frame reaches to end or not. It is passed as an argument of
** read/write to indicate a boundary of ethernet frame.
** Used on GD_ETH_Write() and GD_ETH_Read().
*************************************************************************
*/
typedef enum
{
GD_ETH_FRAME_NOTEND = 0x00000000,//!< frame does not end.
GD_ETH_FRAME_END = 0x00000001,//!< frame ends.
GD_ETH_FRAME_TERM = 0x00000002 //!< frame ends on error
} GD_ETH_FrameEndE;
typedef enum
{
GD_ETH_PHY_IF_MODE_MII,
GD_ETH_PHY_IF_MODE_GMII,
GD_ETH_PHY_IF_MODE_SGMII,
GD_ETH_PHY_IF_MODE_TBI,
GD_ETH_PHY_IF_MODE_RMII,
GD_ETH_PHY_IF_MODE_RGMII,
GD_ETH_PHY_IF_MODE_RGMII_ID,
GD_ETH_PHY_IF_MODE_RGMII_RXID,
GD_ETH_PHY_IF_MODE_RGMII_TXID,
GD_ETH_PHY_IF_MODE_RTBI,
GD_ETH_PHY_IF_MODE_XGMII,
GD_ETH_PHY_IF_MODE_NONE /* Must be last */
}GD_ETH_PHY_IF_E; /* Phy Interface */
//*****************************************************************************
//*****************************************************************************
//** Data Structures
//*****************************************************************************
//*****************************************************************************
/*!
*************************************************************************
** \brief Status information about Ethernet driver and link status.
**
** This data structure contains information about the current ethernet
** driver settings and link status.
**
** \sa GD_ETH_GetStat
*************************************************************************
*/
typedef struct
{
GBOOL bEnAutoNeg;
GD_ETH_SpeedE speed; //!< speed setting
GD_ETH_DuplexE duplex; //!< duplex mode setting
GD_ETH_LoopE loopback; //!< local loopback mode setting
GD_ETH_PHY_IF_E mode; //!<
}GD_ETH_Work_ModeT;
/*!
*************************************************************************
** \brief Status information about Ethernet driver and link status.
**
** This data structure contains information about the current ethernet
** driver settings and link status.
**
** \sa GD_ETH_GetStat
*************************************************************************
*/
typedef struct
{
GD_ETH_SpeedE speed; //!< speed setting
GD_ETH_DuplexE duplex; //!< duplex mode setting
GD_ETH_LoopE loopback; //!< local loopback mode setting
GD_ETH_PHY_IF_E mode; //!<
GD_ETH_LinkE linkup; //!< link is up or not
GD_ETH_ErrorE error; //!< error details (if available)
}GD_ETH_StatParamsT;
/*!
*************************************************************************
** \brief Open parameters for Ethernet driver.
**
** This data structure contains all the parameters for GD_ETH_Open().
**
** \sa GD_ETH_Open
*************************************************************************
*/
typedef struct
{
GBOOL bHWReset;
GD_GPIO_PIN_E phyreset;
U8 phyType;
} GD_ETH_InitParamsT;
/*!
*************************************************************************
** \brief Open parameters for Ethernet driver.
**
** This data structure contains all the parameters for GD_ETH_Open().
**
** \sa GD_ETH_Open
*************************************************************************
*/
typedef struct
{
GD_ETH_PHY_AddrE addr;
GD_ETH_Work_ModeT workmode;
GD_ETH_MacT macaddr;
GD_ETH_IpT ipaddr;
} GD_ETH_OpenParamsT;
//*****************************************************************************
//*****************************************************************************
//** Global Data
//*****************************************************************************
//*****************************************************************************
//*****************************************************************************
//*****************************************************************************
//** API Functions
//*****************************************************************************
//*****************************************************************************
#ifdef __cplusplus
extern "C" {
#endif
GERR GD_ETH_Init(GD_ETH_InitParamsT* pInitParams);
GERR GD_ETH_Exit(void);
GERR GD_ETH_Open(GD_ETH_OpenParamsT* pOpenParams, GD_HANDLE* pHandle);
GERR GD_ETH_Close(GD_HANDLE* pHandle);
S32 GD_ETH_Read(GD_HANDLE handle, char *bufPtr, S32 size, GD_ETH_FrameEndE *pframe);
S32 GD_ETH_Write(GD_HANDLE handle, const char* bufPtr, S32 size, GD_ETH_FrameEndE frame);
GERR GD_ETH_Write_HD(GD_HANDLE handle, const char* HbufPtr, S32 Hsize, const char* DbufPtr, S32 Dsize, GD_ETH_FrameEndE frame);
GERR GD_ETH_SetEMACSpeed(GD_HANDLE handle, GD_ETH_SpeedE speed);
GERR GD_ETH_SetMacAddress(GD_HANDLE handle, GD_ETH_MacT macAddress);
GERR GD_ETH_GetMacAddress(GD_HANDLE handle, GD_ETH_MacT* pmacAddress);
GERR GD_ETH_SetIPAddress(GD_HANDLE handle, GD_ETH_IpT ipAddress);
GERR GD_ETH_GetIPAddress(GD_HANDLE handle, GD_ETH_IpT* pipAddress);
GERR GD_ETH_GetPhyAddress(GD_HANDLE handle, U8* phy);
GERR GD_ETH_GetStat(GD_HANDLE handle, GD_ETH_StatParamsT *statParamsPtr);
GERR GD_ETH_CheckLink(GD_HANDLE handle);
GERR GD_ETH_SleepTime(U32 ulTime);
void GD_ETH_SetNetReceiveFuc(void (*eth_rcve)(volatile U8* recbuf,U16 len));
#ifdef __cplusplus
}
#endif
#endif /* _GD_ETHERNET_H_ */