libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/stm32/sdcard.h

265 lines
14 KiB
C
Raw Blame History

/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name : sdcard.h
* Author : MCD Application Team
* Version : V2.0.3
* Date : 09/22/2008
* Description : This file contains all the functions prototypes for the
* SD Card driver firmware library.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __SDCARD_H
#define __SDCARD_H
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_lib.h"
/* Exported types ------------------------------------------------------------*/
typedef enum
{
/* SDIO specific error defines */
SD_CMD_CRC_FAIL = (1), /* Command response received (but CRC check failed) */
SD_DATA_CRC_FAIL = (2), /* Data bock sent/received (CRC check Failed) */
SD_CMD_RSP_TIMEOUT = (3), /* Command response timeout */
SD_DATA_TIMEOUT = (4), /* Data time out */
SD_TX_UNDERRUN = (5), /* Transmit FIFO under-run */
SD_RX_OVERRUN = (6), /* Receive FIFO over-run */
SD_START_BIT_ERR = (7), /* Start bit not detected on all data signals in widE bus mode */
SD_CMD_OUT_OF_RANGE = (8), /* CMD's argument was out of range.*/
SD_ADDR_MISALIGNED = (9), /* Misaligned address */
SD_BLOCK_LEN_ERR = (10), /* Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
SD_ERASE_SEQ_ERR = (11), /* An error in the sequence of erase command occurs.*/
SD_BAD_ERASE_PARAM = (12), /* An Invalid selection for erase groups */
SD_WRITE_PROT_VIOLATION = (13), /* Attempt to program a write protect block */
SD_LOCK_UNLOCK_FAILED = (14), /* Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
SD_COM_CRC_FAILED = (15), /* CRC check of the previous command failed */
SD_ILLEGAL_CMD = (16), /* Command is not legal for the card state */
SD_CARD_ECC_FAILED = (17), /* Card internal ECC was applied but failed to correct the data */
SD_CC_ERROR = (18), /* Internal card controller error */
SD_GENERAL_UNKNOWN_ERROR = (19), /* General or Unknown error */
SD_STREAM_READ_UNDERRUN = (20), /* The card could not sustain data transfer in stream read operation. */
SD_STREAM_WRITE_OVERRUN = (21), /* The card could not sustain data programming in stream mode */
SD_CID_CSD_OVERWRITE = (22), /* CID/CSD overwrite error */
SD_WP_ERASE_SKIP = (23), /* only partial address space was erased */
SD_CARD_ECC_DISABLED = (24), /* Command has been executed without using internal ECC */
SD_ERASE_RESET = (25), /* Erase sequence was cleared before executing because an out of erase sequence command was received */
SD_AKE_SEQ_ERROR = (26), /* Error in sequence of authentication. */
SD_INVALID_VOLTRANGE = (27),
SD_ADDR_OUT_OF_RANGE = (28),
SD_SWITCH_ERROR = (29),
SD_SDIO_DISABLED = (30),
SD_SDIO_FUNCTION_BUSY = (31),
SD_SDIO_FUNCTION_FAILED = (32),
SD_SDIO_UNKNOWN_FUNCTION = (33),
/* Standard error defines */
SD_INTERNAL_ERROR,
SD_NOT_CONFIGURED,
SD_REQUEST_PENDING,
SD_REQUEST_NOT_APPLICABLE,
SD_INVALID_PARAMETER,
SD_UNSUPPORTED_FEATURE,
SD_UNSUPPORTED_HW,
SD_ERROR,
SD_OK,
} SD_Error;
/* SDIO Commands Index */
#define SDIO_GO_IDLE_STATE ((u8)0)
#define SDIO_SEND_OP_COND ((u8)1)
#define SDIO_ALL_SEND_CID ((u8)2)
#define SDIO_SET_REL_ADDR ((u8)3) /* SDIO_SEND_REL_ADDR for SD Card */
#define SDIO_SET_DSR ((u8)4)
#define SDIO_SDIO_SEN_OP_COND ((u8)5)
#define SDIO_HS_SWITCH ((u8)6)
#define SDIO_SEL_DESEL_CARD ((u8)7)
#define SDIO_HS_SEND_EXT_CSD ((u8)8)
#define SDIO_SEND_CSD ((u8)9)
#define SDIO_SEND_CID ((u8)10)
#define SDIO_READ_DAT_UNTIL_STOP ((u8)11) /* SD Card doesn't support it */
#define SDIO_STOP_TRANSMISSION ((u8)12)
#define SDIO_SEND_STATUS ((u8)13)
#define SDIO_HS_BUSTEST_READ ((u8)14)
#define SDIO_GO_INACTIVE_STATE ((u8)15)
#define SDIO_SET_BLOCKLEN ((u8)16)
#define SDIO_READ_SINGLE_BLOCK ((u8)17)
#define SDIO_READ_MULT_BLOCK ((u8)18)
#define SDIO_HS_BUSTEST_WRITE ((u8)19)
#define SDIO_WRITE_DAT_UNTIL_STOP ((u8)20) /* SD Card doesn't support it */
#define SDIO_SET_BLOCK_COUNT ((u8)23) /* SD Card doesn't support it */
#define SDIO_WRITE_SINGLE_BLOCK ((u8)24)
#define SDIO_WRITE_MULT_BLOCK ((u8)25)
#define SDIO_PROG_CID ((u8)26) /* reserved for manufacturers */
#define SDIO_PROG_CSD ((u8)27)
#define SDIO_SET_WRITE_PROT ((u8)28)
#define SDIO_CLR_WRITE_PROT ((u8)29)
#define SDIO_SEND_WRITE_PROT ((u8)30)
#define SDIO_SD_ERASE_GRP_START ((u8)32) /* To set the address of the first write
block to be erased. (For SD card only) */
#define SDIO_SD_ERASE_GRP_END ((u8)33) /* To set the address of the last write block of the
continuous range to be erased. (For SD card only) */
#define SDIO_ERASE_GRP_START ((u8)35) /* To set the address of the first write block to be erased.
(For MMC card only spec 3.31) */
#define SDIO_ERASE_GRP_END ((u8)36) /* To set the address of the last write block of the
continuous range to be erased. (For MMC card only spec 3.31) */
#define SDIO_ERASE ((u8)38)
#define SDIO_FAST_IO ((u8)39) /* SD Card doesn't support it */
#define SDIO_GO_IRQ_STATE ((u8)40) /* SD Card doesn't support it */
#define SDIO_LOCK_UNLOCK ((u8)42)
#define SDIO_APP_CMD ((u8)55)
#define SDIO_GEN_CMD ((u8)56)
#define SDIO_NO_CMD ((u8)64)
/* Following commands are SD Card Specific commands.
SDIO_APP_CMD should be sent before sending these
commands. */
#define SDIO_APP_SD_SET_BUSWIDTH ((u8)6) /* For SD Card only */
#define SDIO_SD_APP_STAUS ((u8)13) /* For SD Card only */
#define SDIO_SD_APP_SEND_NUM_WRITE_BLOCKS ((u8)22) /* For SD Card only */
#define SDIO_SD_APP_OP_COND ((u8)41) /* For SD Card only */
#define SDIO_SD_APP_SET_CLR_CARD_DETECT ((u8)42) /* For SD Card only */
#define SDIO_SD_APP_SEND_SCR ((u8)51) /* For SD Card only */
#define SDIO_SDIO_RW_DIRECT ((u8)52) /* For SD I/O Card only */
#define SDIO_SDIO_RW_EXTENDED ((u8)53) /* For SD I/O Card only */
/* Following commands are SD Card Specific security commands.
SDIO_APP_CMD should be sent before sending these commands. */
#define SDIO_SD_APP_GET_MKB ((u8)43) /* For SD Card only */
#define SDIO_SD_APP_GET_MID ((u8)44) /* For SD Card only */
#define SDIO_SD_APP_SET_CER_RN1 ((u8)45) /* For SD Card only */
#define SDIO_SD_APP_GET_CER_RN2 ((u8)46) /* For SD Card only */
#define SDIO_SD_APP_SET_CER_RES2 ((u8)47) /* For SD Card only */
#define SDIO_SD_APP_GET_CER_RES1 ((u8)48) /* For SD Card only */
#define SDIO_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((u8)18) /* For SD Card only */
#define SDIO_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((u8)25) /* For SD Card only */
#define SDIO_SD_APP_SECURE_ERASE ((u8)38) /* For SD Card only */
#define SDIO_SD_APP_CHANGE_SECURE_AREA ((u8)49) /* For SD Card only */
#define SDIO_SD_APP_SECURE_WRITE_MKB ((u8)48) /* For SD Card only */
typedef enum
{
SD_NO_TRANSFER = 0,
SD_TRANSFER_IN_PROGRESS
} SDTransferState;
typedef struct
{
u16 TransferredBytes;
SD_Error TransferError;
u8 padding;
} SDLastTransferInfo;
typedef struct /* Card Specific Data */
{
vu8 CSDStruct; /* CSD structure */
vu8 SysSpecVersion; /* System specification version */
vu8 Reserved1; /* Reserved */
vu8 TAAC; /* Data read access-time 1 */
vu8 NSAC; /* Data read access-time 2 in CLK cycles */
vu8 MaxBusClkFrec; /* Max. bus clock frequency */
vu16 CardComdClasses; /* Card command classes */
vu8 RdBlockLen; /* Max. read data block length */
vu8 PartBlockRead; /* Partial blocks for read allowed */
vu8 WrBlockMisalign; /* Write block misalignment */
vu8 RdBlockMisalign; /* Read block misalignment */
vu8 DSRImpl; /* DSR implemented */
vu8 Reserved2; /* Reserved */
vu32 DeviceSize; /* Device Size */
vu8 MaxRdCurrentVDDMin; /* Max. read current @ VDD min */
vu8 MaxRdCurrentVDDMax; /* Max. read current @ VDD max */
vu8 MaxWrCurrentVDDMin; /* Max. write current @ VDD min */
vu8 MaxWrCurrentVDDMax; /* Max. write current @ VDD max */
vu8 DeviceSizeMul; /* Device size multiplier */
vu8 EraseGrSize; /* Erase group size */
vu8 EraseGrMul; /* Erase group size multiplier */
vu8 WrProtectGrSize; /* Write protect group size */
vu8 WrProtectGrEnable; /* Write protect group enable */
vu8 ManDeflECC; /* Manufacturer default ECC */
vu8 WrSpeedFact; /* Write speed factor */
vu8 MaxWrBlockLen; /* Max. write data block length */
vu8 WriteBlockPaPartial; /* Partial blocks for write allowed */
vu8 Reserved3; /* Reserded */
vu8 ContentProtectAppli; /* Content protection application */
vu8 FileFormatGrouop; /* File format group */
vu8 CopyFlag; /* Copy flag (OTP) */
vu8 PermWrProtect; /* Permanent write protection */
vu8 TempWrProtect; /* Temporary write protection */
vu8 FileFormat; /* File Format */
vu8 ECC; /* ECC code */
vu8 CSD_CRC; /* CSD CRC */
vu8 Reserved4; /* always 1*/
} SD_CSD;
typedef struct /*Card Identification Data*/
{
vu8 ManufacturerID; /* ManufacturerID */
vu16 OEM_AppliID; /* OEM/Application ID */
vu32 ProdName1; /* Product Name part1 */
vu8 ProdName2; /* Product Name part2*/
vu8 ProdRev; /* Product Revision */
vu32 ProdSN; /* Product Serial Number */
vu8 Reserved1; /* Reserved1 */
vu16 ManufactDate; /* Manufacturing Date */
vu8 CID_CRC; /* CID CRC */
vu8 Reserved2; /* always 1 */
} SD_CID;
typedef struct
{
SD_CSD SD_csd;
SD_CID SD_cid;
u32 CardCapacity; /* Card Capacity */
u32 CardBlockSize; /* Card Block Size */
u16 RCA;
u8 CardType;
} SD_CardInfo;
/* Exported constants --------------------------------------------------------*/
#define SD_DMA_MODE ((u32)0x00000000)
#define SD_INTERRUPT_MODE ((u32)0x00000001)
#define SD_POLLING_MODE ((u32)0x00000002)
/* Supported Memory Cards */
#define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((u32)0x0)
#define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((u32)0x1)
#define SDIO_HIGH_CAPACITY_SD_CARD ((u32)0x2)
#define SDIO_MULTIMEDIA_CARD ((u32)0x3)
#define SDIO_SECURE_DIGITAL_IO_CARD ((u32)0x4)
#define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((u32)0x5)
#define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((u32)0x6)
#define SDIO_HIGH_CAPACITY_MMC_CARD ((u32)0x7)
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
SD_Error SD_Init(void);
SD_Error SD_PowerON(void);
SD_Error SD_PowerOFF(void);
SD_Error SD_InitializeCards(void);
SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo);
SD_Error SD_EnableWideBusOperation(u32 WideMode);
SD_Error SD_SetDeviceMode(u32 Mode);
SD_Error SD_SelectDeselect(u32 addr);
SD_Error SD_ReadBlock(u32 addr, u32 *readbuff, u16 BlockSize);
SD_Error SD_ReadMultiBlocks(u32 addr, u32 *readbuff, u16 BlockSize, u32 NumberOfBlocks);
SD_Error SD_WriteBlock(u32 addr, u32 *writebuff, u16 BlockSize);
SD_Error SD_WriteMultiBlocks(u32 addr, u32 *writebuff, u16 BlockSize, u32 NumberOfBlocks);
SDTransferState SD_GetTransferState(void);
SD_Error SD_StopTransfer(void);
SD_Error SD_Erase(u32 startaddr, u32 endaddr);
SD_Error SD_SendStatus(u32 *pcardstatus);
SD_Error SD_SendSDStatus(u32 *psdstatus);
SD_Error SD_ProcessIRQSrc(void);
#endif /* __SDCARD_H */
/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
View Git Blame Copy Permalink