rt-thread-official/bsp/stm32/stm32f413-st-nucleo
latercomer fe3c4d456e bsp中option env语句替换为新语句,并同步更新了source "$xxx"语句 2024-06-20 14:40:42 +08:00
..
.ci/attachconfig [ci][bsp] add strict mode 2024-01-10 18:08:09 +08:00
applications [bsp][stm32][nano] support nano version 2023-12-03 21:25:00 +08:00
board bsp中option env语句替换为新语句,并同步更新了source "$xxx"语句 2024-06-20 14:40:42 +08:00
figures
.config [bsp] update projects 2024-03-21 11:23:29 +08:00
.gitignore
EventRecorderStub.scvd
Kconfig bsp中option env语句替换为新语句,并同步更新了source "$xxx"语句 2024-06-20 14:40:42 +08:00
README.md 【English Readme】[stm32f413 nucleo] add English version readme 2020-11-21 17:54:43 +08:00
README_zh.md 【English Readme】[stm32f413 nucleo] add English version readme 2020-11-21 17:54:43 +08:00
SConscript
SConstruct [bsp]stm32工程生成路径在源码目录 2023-07-03 15:20:57 +08:00
project.ewd
project.ewp [bsp] update projects 2024-03-21 11:23:29 +08:00
project.eww
project.uvopt update README.md and main.c file 2020-06-07 15:30:50 +08:00
project.uvoptx 更新 stm32 工程,nxp 工程 2020-12-28 15:02:17 +08:00
project.uvproj [bsp] update projects 2024-03-21 11:23:29 +08:00
project.uvprojx [bsp] update projects 2024-03-21 11:23:29 +08:00
rtconfig.h [bsp] update projects 2024-03-21 11:23:29 +08:00
rtconfig.py [scons][iar] 将IAR的PLATFORM字段由iar调整为iccarm 2022-06-09 07:01:59 +08:00
template.ewp
template.eww
template.uvopt
template.uvoptx update README.md and main.c file 2020-06-07 15:30:50 +08:00
template.uvproj
template.uvprojx update README.md and main.c file 2020-06-07 15:30:50 +08:00

README.md

STM32F413-Nucleo BSP Introduction

中文

MCU: STM32F413ZH @100MHz, 1.5 MB FLASH, 320KB RAM

The STM32F413xG/H devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 100 MHz. Their Cortex®-M4 core features a Floating point unit (FPU) single precision which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32F413xG/H devices belong to the STM32F4 access product lines (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching. The STM32F413xG/H devices incorporate high-speed embedded memories (up to 1.5 Mbytes of Flash memory, 320 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. All devices offer a 12-bit ADC, two 12-bit DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timer for motor control, two general-purpose 32-bit timers and a low power timer. They also feature standard and advanced communication interfaces.

KEY FEATURES

  • Dynamic Efficiency Line with eBAM (enhanced Batch Acquisition Mode)

    • 1.7 V to 3.6 V power supply
    • -40 °C to 85/105/125 °C temperature range
  • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

  • Memories

    • Up to 1.5 Mbytes of Flash memory
    • 320 Kbytes of SRAM
    • Flexible external static memory controller with up to 16-bit data bus: SRAM, PSRAM, NOR Flash memory
    • Dual mode Quad-SPI interface
  • LCD parallel interface, 8080/6800 modes

  • Clock, reset and supply management

    • 1.7 to 3.6 V application supply and I/Os
    • POR, PDR, PVD and BOR
    • 4-to-26 MHz crystal oscillator
    • Internal 16 MHz factory-trimmed RC
    • 32 kHz oscillator for RTC with calibration
    • Internal 32 kHz RC with calibration
  • Power consumption

    • Run: 112 μA/MHz (peripheral off)
    • Stop (Flash in Stop mode, fast wakeup time): 42 μA Typ.; 80 μA max @25 °C
    • Stop (Flash in Deep power down mode, slow wakeup time): 15 μA Typ.; 46 μA max @25 °C
    • Standby without RTC: 1.1 μA Typ.; 14.7 μA max at @85 °C
    • VBAT supply for RTC: 1 μA @25 °C
  • 2x12-bit D/A converters

  • 1×12-bit, 2.4 MSPS ADC: up to 16 channels

  • 6x digital filters for sigma delta modulator, 12x PDM interfaces, with stereo microphone and sound source localization support

  • General-purpose DMA: 16-stream DMA

  • Up to 18 timers: up to twelve 16-bit timers, two 32-bit timers up to 100 MHz each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window), one SysTick timer, and a low-power timer

  • Debug mode

    • Serial wire debug (SWD) & JTAG
    • Cortex®-M4 Embedded Trace Macrocell™
  • Up to 114 I/O ports with interrupt capability

    • Up to 109 fast I/Os up to 100 MHz
    • Up to 114 five V-tolerant I/Os
  • Up to 24 communication interfaces

    • Up to 4x I2C interfaces (SMBus/PMBus)
    • Up to 10 UARTS: 4 USARTs / 6 UARTs (2 x 12.5 Mbit/s, 2 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
    • Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI or I2S audio protocol), out of which 2 muxed full-duplex I2S interfaces
    • SDIO interface (SD/MMC/eMMC)
    • Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with PHY
    • 3x CAN (2.0B Active)
    • 1xSAI
  • True random number generator

  • CRC calculation unit

  • 96-bit unique ID

  • RTC: subsecond accuracy, hardware calendar

  • All packages are ECOPACK®2

Read more

Documents Description
STM32_Nucleo-144_BSP_Introduction How to run RT-Thread on STM32 Nucleo-144 boards (Must-Read)
STM32F413ZH ST Official Website STM32F413ZH datasheet and other resources

Maintained By

flybreak g1171407708@163.com

Translated By

Meco Man @ RT-Thread Community

jiantingman@foxmail.com

https://github.com/mysterywolf