rt-thread-official/components/legacy/fdt/docs/examples.md

81 lines
2.2 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# fdt示例 #
在`examples`文件夹中存放`bcm2711-rpi-4-b.dtb`和`vexpress-v2p-ca9.dtb`可供测试如果系统可以从bootloader或其他方式获取到bsp本身的dtb也可以通过修改示例程序进行测试
## fdt_dump
```bash
fdt_dump vexpress-v2p-ca9.dtb
```
#### 示例结果 ####
```bash
/dts-v1/;
/ {
model = "V2P-CA9";
arm,hbi = <0x191>;
arm,vexpress,site = <0xf>;
compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
interrupt-parent = <0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
chosen {
};
aliases {
serial0 = "/smb@4000000/motherboard/iofpga@7,00000000/uart@9000";
serial1 = "/smb@4000000/motherboard/iofpga@7,00000000/uart@a000";
serial2 = "/smb@4000000/motherboard/iofpga@7,00000000/uart@b000";
serial3 = "/smb@4000000/motherboard/iofpga@7,00000000/uart@c000";
i2c0 = "/smb@4000000/motherboard/iofpga@7,00000000/i2c@16000";
i2c1 = "/smb@4000000/motherboard/iofpga@7,00000000/i2c@2000";
};
...... 省略
hsb@e0000000 {
compatible = "simple-bus";
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0x0 0xe0000000 0x20000000>;
#interrupt-cells = <0x1>;
interrupt-map-mask = <0x0 0x3>;
interrupt-map = <0x0 0x0 0x1 0x0 0x24 0x4 0x0 0x1 0x1 0x0 0x25 0x4 0x0 0x2 0x1 0x0 0x26 0x4 0x0 0x3 0x1 0x0 0x27 0x4>;
};
};
```
## fdt_test
```bash
fdt_test
```
#### 示例结果 ####
```bash
name = uart@9000
reg = <0x9000,0x1000>;
compatible = "arm,pl011","arm,primecell";
name = cpus
path = /cpus/cpu@0/
path = /cpus/cpu@1/
path = /cpus/cpu@2/
path = /cpus/cpu@3/
name = user1, lable = v2m:green:user1
name = user2, lable = v2m:green:user2
name = user3, lable = v2m:green:user3
name = user4, lable = v2m:green:user4
name = user5, lable = v2m:green:user5
name = user6, lable = v2m:green:user6
name = user7, lable = v2m:green:user7
name = user8, lable = v2m:green:user8
/memreserve/ 0x0000000000000000 0x0000000000001000;
phandle = <0x9>
name = bt_pins
path = /soc/gpio@7e200000/bt_pins/
brcm,pins = [2d 00]
```