169 lines
8.0 KiB
C
169 lines
8.0 KiB
C
#ifndef __FW_HEADER_H__
|
|
#define __FW_HEADER_H__
|
|
|
|
#include "stdint.h"
|
|
#include "stdio.h"
|
|
|
|
struct __attribute__((packed, aligned(4))) spi_flash_cfg_t {
|
|
uint8_t ioMode; /*!< Serail flash interface mode,bit0-3:IF mode,bit4:unwrap */
|
|
uint8_t cReadSupport; /*!< Support continuous read mode,bit0:continuous read mode support,bit1:read mode cfg */
|
|
uint8_t clkDelay; /*!< SPI clock delay,bit0-3:delay,bit4-6:pad delay */
|
|
uint8_t clkInvert; /*!< SPI clock phase invert,bit0:clck invert,bit1:rx invert,bit2-4:pad delay,bit5-7:pad delay */
|
|
uint8_t resetEnCmd; /*!< Flash enable reset command */
|
|
uint8_t resetCmd; /*!< Flash reset command */
|
|
uint8_t resetCreadCmd; /*!< Flash reset continuous read command */
|
|
uint8_t resetCreadCmdSize; /*!< Flash reset continuous read command size */
|
|
uint8_t jedecIdCmd; /*!< JEDEC ID command */
|
|
uint8_t jedecIdCmdDmyClk; /*!< JEDEC ID command dummy clock */
|
|
uint8_t enter32BitsAddrCmd; /*!< Enter 32-bits addr command */
|
|
uint8_t exit32BitsAddrCmd; /*!< Exit 32-bits addr command */
|
|
uint8_t sectorSize; /*!< *1024bytes */
|
|
uint8_t mid; /*!< Manufacturer ID */
|
|
uint16_t pageSize; /*!< Page size */
|
|
uint8_t chipEraseCmd; /*!< Chip erase cmd */
|
|
uint8_t sectorEraseCmd; /*!< Sector erase command */
|
|
uint8_t blk32EraseCmd; /*!< Block 32K erase command,some Micron not support */
|
|
uint8_t blk64EraseCmd; /*!< Block 64K erase command */
|
|
uint8_t writeEnableCmd; /*!< Need before every erase or program */
|
|
uint8_t pageProgramCmd; /*!< Page program cmd */
|
|
uint8_t qpageProgramCmd; /*!< QIO page program cmd */
|
|
uint8_t qppAddrMode; /*!< QIO page program address mode */
|
|
uint8_t fastReadCmd; /*!< Fast read command */
|
|
uint8_t frDmyClk; /*!< Fast read command dummy clock */
|
|
uint8_t qpiFastReadCmd; /*!< QPI fast read command */
|
|
uint8_t qpiFrDmyClk; /*!< QPI fast read command dummy clock */
|
|
uint8_t fastReadDoCmd; /*!< Fast read dual output command */
|
|
uint8_t frDoDmyClk; /*!< Fast read dual output command dummy clock */
|
|
uint8_t fastReadDioCmd; /*!< Fast read dual io comamnd */
|
|
uint8_t frDioDmyClk; /*!< Fast read dual io command dummy clock */
|
|
uint8_t fastReadQoCmd; /*!< Fast read quad output comamnd */
|
|
uint8_t frQoDmyClk; /*!< Fast read quad output comamnd dummy clock */
|
|
uint8_t fastReadQioCmd; /*!< Fast read quad io comamnd */
|
|
uint8_t frQioDmyClk; /*!< Fast read quad io comamnd dummy clock */
|
|
uint8_t qpiFastReadQioCmd; /*!< QPI fast read quad io comamnd */
|
|
uint8_t qpiFrQioDmyClk; /*!< QPI fast read QIO dummy clock */
|
|
uint8_t qpiPageProgramCmd; /*!< QPI program command */
|
|
uint8_t writeVregEnableCmd; /*!< Enable write reg */
|
|
uint8_t wrEnableIndex; /*!< Write enable register index */
|
|
uint8_t qeIndex; /*!< Quad mode enable register index */
|
|
uint8_t busyIndex; /*!< Busy status register index */
|
|
uint8_t wrEnableBit; /*!< Write enable bit pos */
|
|
uint8_t qeBit; /*!< Quad enable bit pos */
|
|
uint8_t busyBit; /*!< Busy status bit pos */
|
|
uint8_t wrEnableWriteRegLen; /*!< Register length of write enable */
|
|
uint8_t wrEnableReadRegLen; /*!< Register length of write enable status */
|
|
uint8_t qeWriteRegLen; /*!< Register length of contain quad enable */
|
|
uint8_t qeReadRegLen; /*!< Register length of contain quad enable status */
|
|
uint8_t releasePowerDown; /*!< Release power down command */
|
|
uint8_t busyReadRegLen; /*!< Register length of contain busy status */
|
|
uint8_t readRegCmd[4]; /*!< Read register command buffer */
|
|
uint8_t writeRegCmd[4]; /*!< Write register command buffer */
|
|
uint8_t enterQpi; /*!< Enter qpi command */
|
|
uint8_t exitQpi; /*!< Exit qpi command */
|
|
uint8_t cReadMode; /*!< Config data for continuous read mode */
|
|
uint8_t cRExit; /*!< Config data for exit continuous read mode */
|
|
uint8_t burstWrapCmd; /*!< Enable burst wrap command */
|
|
uint8_t burstWrapCmdDmyClk; /*!< Enable burst wrap command dummy clock */
|
|
uint8_t burstWrapDataMode; /*!< Data and address mode for this command */
|
|
uint8_t burstWrapData; /*!< Data to enable burst wrap */
|
|
uint8_t deBurstWrapCmd; /*!< Disable burst wrap command */
|
|
uint8_t deBurstWrapCmdDmyClk; /*!< Disable burst wrap command dummy clock */
|
|
uint8_t deBurstWrapDataMode; /*!< Data and address mode for this command */
|
|
uint8_t deBurstWrapData; /*!< Data to disable burst wrap */
|
|
uint16_t timeEsector; /*!< 4K erase time */
|
|
uint16_t timeE32k; /*!< 32K erase time */
|
|
uint16_t timeE64k; /*!< 64K erase time */
|
|
uint16_t timePagePgm; /*!< Page program time */
|
|
uint16_t timeCe; /*!< Chip erase time in ms */
|
|
uint8_t pdDelay; /*!< Release power down command delay time for wake up */
|
|
uint8_t qeData; /*!< QE set data */
|
|
};
|
|
|
|
struct __attribute__((packed, aligned(4))) boot_flash_cfg_t {
|
|
uint32_t magiccode;
|
|
struct spi_flash_cfg_t cfg;
|
|
uint32_t crc32;
|
|
};
|
|
|
|
struct __attribute__((packed, aligned(4))) sys_clk_cfg_t {
|
|
uint8_t xtal_type;
|
|
uint8_t pll_clk;
|
|
uint8_t hclk_div;
|
|
uint8_t bclk_div;
|
|
|
|
uint8_t flash_clk_type;
|
|
uint8_t flash_clk_div;
|
|
uint8_t rsvd[2];
|
|
};
|
|
|
|
struct __attribute__((packed, aligned(4))) boot_clk_cfg_t {
|
|
uint32_t magiccode;
|
|
struct sys_clk_cfg_t cfg;
|
|
uint32_t crc32;
|
|
};
|
|
|
|
struct __attribute__((packed, aligned(4))) aesiv_cfg_t {
|
|
uint8_t aesiv[16];
|
|
uint32_t crc32;
|
|
};
|
|
|
|
struct __attribute__((packed, aligned(4))) pkey_cfg_t {
|
|
uint8_t eckeyx[32]; /* ec key in boot header */
|
|
uint8_t eckeyy[32]; /* ec key in boot header */
|
|
uint32_t crc32;
|
|
};
|
|
|
|
struct __attribute__((packed, aligned(4))) sign_cfg_t {
|
|
uint32_t sig_len;
|
|
uint8_t signature[32];
|
|
uint32_t crc32;
|
|
};
|
|
|
|
struct __attribute__((packed, aligned(4))) bootheader_t {
|
|
uint32_t magiccode; /* 4 */
|
|
uint32_t rivison; /* 4 */
|
|
struct boot_flash_cfg_t flash_cfg; /* 4 + 84 + 4 */
|
|
struct boot_clk_cfg_t clk_cfg; /* 4 + 8 + 4 */
|
|
union __attribute__((packed, aligned(1))) {
|
|
struct __attribute__((packed, aligned(1))) {
|
|
uint32_t sign : 2; /* [1: 0] for sign*/
|
|
uint32_t encrypt_type : 2; /* [3: 2] for encrypt */
|
|
uint32_t key_sel : 2; /* [5: 4] for key sel in boot interface*/
|
|
uint32_t rsvd6_7 : 2; /* [7: 6] for encrypt*/
|
|
uint32_t no_segment : 1; /* [8] no segment info */
|
|
uint32_t cache_select : 1; /* [9] for cache */
|
|
uint32_t notload_in_bootrom : 1; /* [10] not load this img in bootrom */
|
|
uint32_t aes_region_lock : 1; /* [11] aes region lock */
|
|
uint32_t cache_way_disable : 4; /* [15: 12] cache way disable info*/
|
|
uint32_t crc_ignore : 1; /* [16] ignore crc */
|
|
uint32_t hash_ignore : 1; /* [17] hash crc */
|
|
uint32_t halt_ap : 1; /* [18] halt ap */
|
|
uint32_t rsvd19_31 : 13; /* [31:19] rsvd */
|
|
} bval;
|
|
uint32_t wval;
|
|
} boot_cfg; /* 4 */
|
|
|
|
union __attribute__((packed, aligned(1))) {
|
|
uint32_t segment_cnt;
|
|
uint32_t img_len;
|
|
} img_segment_info; /* 4 */
|
|
|
|
uint32_t rsvd0; /* rsvd */
|
|
|
|
union __attribute__((packed, aligned(1))) {
|
|
uint32_t ramaddr;
|
|
uint32_t flashoffset;
|
|
} img_start; /* 4 */
|
|
|
|
uint32_t hash[32 / 4]; /*hash of the image*/
|
|
|
|
uint32_t rsv1;
|
|
uint32_t rsv2;
|
|
uint32_t crc32;
|
|
};
|
|
|
|
#define BFLB_FW_LENGTH_OFFSET 120
|
|
#define BFLB_FW_HASH_OFFSET 132
|
|
|
|
#endif
|