125 lines
4.9 KiB
Markdown
125 lines
4.9 KiB
Markdown
# Seeed Wio-Terminal BSP Introduction
|
||
|
||
[中文](README_zh.md)
|
||
|
||
|
||
|
||
- MCU: ATSAMD51P19A @120MHz, 512KB FLASH, 192KB RAM
|
||
- D51: Cortex-M4F + Adavanced Feature Set
|
||
- Pin: G=48 pins, J=64 pins, N=100 pins, P=128 pins
|
||
- Flash: 18=256KB, 19=512KB, 20=1024KB (size=2^n)
|
||
- SRAM : 128KB(Flash 256KB), 192KB(Flash 512KB), 256KB(Flash 1MB)
|
||
- Datasheet: <https://www.microchip.com/en-us/product/ATSAMD51P19>
|
||
|
||
#### KEY FEATURES
|
||
|
||
#### Core
|
||
|
||
- 32-bit Arm® Cortex®-M4 core with single-precision FPU and 4 KB combined instruction cache and data cache; frequency up to 120 MHz, MPU, 403 CoreMark® at 120 MHz, and DSP instructions
|
||
|
||
#### Memories
|
||
|
||
- 1 MB/512 KB/256 KB in-system self-programmable Flash with:
|
||
- Error Correction Code (ECC)
|
||
- Dual bank with Read-While-Write (RWW) support
|
||
|
||
- EEPROM hardware emulation
|
||
- 128 KB, 192 KB, 256 KB SRAM main memory
|
||
- 64 KB, 96 KB, 128 KB of Error Correction Code (ECC) RAM option
|
||
- Up to 4 KB of Tightly Coupled Memory (TCM)
|
||
- Up to 8 KB additional SRAM
|
||
- Can be retained in backup mode
|
||
- Eight 32-bit backup registers
|
||
|
||
#### System
|
||
|
||
- Power-on Reset (POR) and Brown-out detection (BOD)
|
||
- Internal and external clock options
|
||
- External Interrupt Controller (EIC)
|
||
- 16 external interrupts
|
||
- One non-maskable interrupt
|
||
- Two-pin Serial Wire Debug (SWD) programming, test, and debugging interface
|
||
|
||
#### High-Performance Peripherals
|
||
|
||
- 32-channel Direct Memory Access Controller (DMAC)
|
||
- Up to two SD/MMC Host Controller (SDHC)
|
||
- Up to 50 MHz operation
|
||
- 4-bit or 1-bit interface
|
||
- Compatibility with SD and SDHC memory card specification version 3.01
|
||
- Compatibility with SDIO specification version 3.0
|
||
- Compliant with JDEC specification, MMC memory cards V4.51
|
||
- One Quad I/O Serial Peripheral Interface (QSPI)
|
||
- Dedicated AHB memory zone
|
||
- One Ethernet MAC (SAM E53 and SAM E54)– 10/100 Mbps in MII and RMII with dedicated DMA
|
||
- IEEE® 1588 Precision Time Protocol (PTP) support
|
||
- IEEE 1588 Time Stamping Unit (TSU) support
|
||
- IEEE802.3AZ energy efficiency support
|
||
- Support for 802.1AS and 1588 precision clock synchronization protocol
|
||
- Wake on LAN support
|
||
- Up to two Controller Area Network (CAN) (that is., SAM E51 and SAM E54)
|
||
- Support for CAN 2.0A/CAN 2.0B and CAN-FD (ISO 11898-1:2016)
|
||
- One Full-Speed (12 Mbps) Universal Serial Bus (USB) 2.0 interface
|
||
- Embedded host and device function
|
||
- Eight endpoints
|
||
- On-chip transceiver with integrated serial resistor
|
||
|
||
#### System Peripherals
|
||
|
||
- Up to 114 I/O lines with external interrupt capability (edge- or level-sensitivity), debouncing, glitch filtering and On-die Series Resistor Termination
|
||
- Five Parallel Input/Output Controllers (PIO)
|
||
- 32-channel Event System
|
||
- Up to eight Serial Communication Interfaces (SERCOM), can be configured as USART/I2C/SPI
|
||
- Up to eight 16-bit Timers/Counters (TC), can be configured as 8/16/32bit TC.
|
||
- Two 24-bit Timer/Counters for Control (TCC), with extended functions
|
||
- Up to Three 16-bit Timer/Counters for Control (TCC) with extended functions.
|
||
- 32-bit Real Time Counter (RTC) with clock/calendar function
|
||
- Up to 4 wake-up pins with tamper detection and debouncing filter
|
||
- Watchdog Timer (WDT) with Window mode
|
||
- CRC-32 generator
|
||
- One two-channel Inter-IC Sound Interface (I2S)
|
||
- Position Decoder (PDEC)
|
||
- Frequency meter (FREQM)
|
||
- Four Configurable Custom Logic (CCL)
|
||
- Dual 12-bit, 1 MSPS Analog-to-Digital Converter (ADC) with up to 16 channels each:
|
||
- Dual 12-bit, 1 MSPS output Digital-to-Analog Converter (DAC)
|
||
- Two Analog Comparators (AC) with Window Compare function
|
||
- One temperature sensor
|
||
- Parallel Capture Controller (PCC)
|
||
- Peripheral Touch Controller (PTC) - Capacitive Touch buttons, sliders, and wheels
|
||
|
||
#### Cryptography
|
||
|
||
- One Advanced Encryption System (AES) with 256-bit key length and up to 2 MB/s data rate
|
||
- Five confidential modes of operation (ECB, CBC, CFB, OFB, CTR)
|
||
- Supports counter with CBC-MAC mode
|
||
- Galois Counter Mode (GCM) - True Random Number Generator (TRNG)
|
||
- Public Key Cryptography Controller (PUKCC) and associated Classical Public Key Cryptography Library (PUKCL)
|
||
- RSA, DSA : Elliptic Curves Cryptography (ECC) ECC GF(2n), ECC GF(p)
|
||
- Integrity Check Module (ICM) based on Secure Hash Algorithm (SHA1, SHA224, SHA256), DMA assisted
|
||
|
||
#### I/O
|
||
|
||
- Up to 99 programmable I/O pins
|
||
|
||
#### Qualification
|
||
|
||
- AEC-Q100 Grade 1 (-40°C to 125°C)
|
||
|
||
#### Package Type
|
||
|
||
- VQFN48, 48-lead VQFN, 7x7 mm, pitch 0.5 mm, I/O Pins up to 37
|
||
- VQFN64, 64-lead VQFN, 9x9 mm, pitch 0.5 mm, I/O Pins up to 51
|
||
- TQFP64, 64-lead TQFP, 10x10 mm, pitch 0.5 mm, I/O Pins up to 51
|
||
- TQFP100, 100-lead TQFP, 14x14 mm, pitch 0.5 mm, I/O Pins up to 81
|
||
- TQFP128, 128-lead TQFP, 14x14 mm, pitch 0.4 mm, I/O Pins up to 99
|
||
- TFBGA120, 120-ball TFBGA, 8x8 mm, pitch 0.5 mm, I/O Pins up to 90
|
||
|
||
#### Board info
|
||
|
||
- [Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi Dev Board](https://www.seeedstudio.com/Wio-Terminal-p-4509.html)
|
||
|
||
#### Contact Info
|
||
|
||
- [luhuadong](https://github.com/luhuadong), <luhuadong@163.com>
|