295 lines
15 KiB
C
295 lines
15 KiB
C
/*****************************************************************************
|
|
* Copyright (C) 2020, Huada Semiconductor Co., Ltd. All rights reserved.
|
|
*
|
|
* This software component is licensed by HDSC under BSD 3-Clause license
|
|
* (the "License"); You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*/
|
|
/******************************************************************************/
|
|
/** \file hc32f460_gpio.h
|
|
**
|
|
** A detailed description is available at
|
|
** @link GpioGroup Gpio description @endlink
|
|
**
|
|
** - 2018-10-12 CDT First version for Device Driver Library of Gpio.
|
|
**
|
|
******************************************************************************/
|
|
|
|
#ifndef __HC32F460_GPIO_H__
|
|
#define __HC32F460_GPIO_H__
|
|
|
|
/*******************************************************************************
|
|
* Include files
|
|
******************************************************************************/
|
|
#include "hc32_common.h"
|
|
#include "ddl_config.h"
|
|
|
|
#if (DDL_GPIO_ENABLE == DDL_ON)
|
|
|
|
/* C binding of definitions if building with C++ compiler */
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
/**
|
|
*******************************************************************************
|
|
** \defgroup GpioGroup General Purpose Input/Output(GPIO)
|
|
**
|
|
******************************************************************************/
|
|
//@{
|
|
|
|
/*******************************************************************************
|
|
* Global type definitions ('typedef')
|
|
******************************************************************************/
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO Configuration Mode enumeration
|
|
**
|
|
******************************************************************************/
|
|
typedef enum en_pin_mode
|
|
{
|
|
Pin_Mode_In = 0, ///< GPIO Input mode
|
|
Pin_Mode_Out = 1, ///< GPIO Output mode
|
|
Pin_Mode_Ana = 2, ///< GPIO Analog mode
|
|
}en_pin_mode_t;
|
|
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO Drive Capacity enumeration
|
|
**
|
|
******************************************************************************/
|
|
typedef enum en_pin_drv
|
|
{
|
|
Pin_Drv_L = 0, ///< Low Drive Capacity
|
|
Pin_Drv_M = 1, ///< Middle Drive Capacity
|
|
Pin_Drv_H = 2, ///< High Drive Capacity
|
|
}en_pin_drv_t;
|
|
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO Output Type enumeration
|
|
******************************************************************************/
|
|
typedef enum en_pin_o_type
|
|
{
|
|
Pin_OType_Cmos = 0, ///< CMOS
|
|
Pin_OType_Od = 1, ///< Open Drain
|
|
}en_pin_o_type_t;
|
|
|
|
|
|
typedef enum en_debug_port
|
|
{
|
|
TCK_SWCLK = 1 << 0, ///< TCK or SWCLK
|
|
TMS_SWDIO = 1 << 1, ///< TMS or SWDIO
|
|
TDO_SWO = 1 << 2, ///< TOD or SWD
|
|
TDI = 1 << 3, ///< TDI
|
|
TRST = 1 << 4, ///< TRest
|
|
ALL_DBG_PIN = 0x1Fu ///< All above
|
|
}en_debug_port_t;
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO Port Index enumeration
|
|
******************************************************************************/
|
|
typedef enum en_port
|
|
{
|
|
PortA = 0, ///< port group A
|
|
PortB = 1, ///< port group B
|
|
PortC = 2, ///< port group C
|
|
PortD = 3, ///< port group D
|
|
PortE = 4, ///< port group E
|
|
PortH = 5, ///< port group H
|
|
}en_port_t;
|
|
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO Pin Index enumeration
|
|
******************************************************************************/
|
|
typedef enum en_pin
|
|
{
|
|
Pin00 = (1 << 0), ///< Pin index 00 of each port group
|
|
Pin01 = (1 << 1), ///< Pin index 01 of each port group
|
|
Pin02 = (1 << 2), ///< Pin index 02 of each port group
|
|
Pin03 = (1 << 3), ///< Pin index 03 of each port group
|
|
Pin04 = (1 << 4), ///< Pin index 04 of each port group
|
|
Pin05 = (1 << 5), ///< Pin index 05 of each port group
|
|
Pin06 = (1 << 6), ///< Pin index 06 of each port group
|
|
Pin07 = (1 << 7), ///< Pin index 07 of each port group
|
|
Pin08 = (1 << 8), ///< Pin index 08 of each port group
|
|
Pin09 = (1 << 9), ///< Pin index 09 of each port group
|
|
Pin10 = (1 << 10), ///< Pin index 10 of each port group
|
|
Pin11 = (1 << 11), ///< Pin index 11 of each port group
|
|
Pin12 = (1 << 12), ///< Pin index 12 of each port group
|
|
Pin13 = (1 << 13), ///< Pin index 13 of each port group
|
|
Pin14 = (1 << 14), ///< Pin index 14 of each port group
|
|
Pin15 = (1 << 15), ///< Pin index 15 of each port group
|
|
PinAll= 0xFFFF, ///< All pins selected
|
|
}en_pin_t;
|
|
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO Pin read wait cycle enumeration
|
|
******************************************************************************/
|
|
typedef enum en_read_wait
|
|
{
|
|
WaitCycle0 = 0, ///< no wait cycle, operation freq. lower than 42MHz
|
|
WaitCycle1 = 1, ///< one wait cycle, operation freq. @[42~84)MHz
|
|
WaitCycle2 = 2, ///< two wait cycles, operation freq. @[84~126)MHz
|
|
WaitCycle3 = 3, ///< three wait cycles, operation freq. @[126~200)MHz
|
|
}en_read_wait_t;
|
|
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO Function enumeration
|
|
******************************************************************************/
|
|
typedef enum en_port_func
|
|
{
|
|
Func_Gpio = 0u, ///< function set to gpio
|
|
Func_Fcmref = 1u, ///< function set to fcm reference
|
|
Func_Rtcout = 1u, ///< function set to rtc output
|
|
Func_Vcout = 1u, ///< function set to vc output
|
|
Func_Adtrg = 1u, ///< function set to adc trigger
|
|
Func_Mclkout = 1u, ///< function set to mclk output
|
|
Func_Tim4 = 2u, ///< function set to timer4
|
|
Func_Tim6 = 3u, ///< function set to timer6
|
|
Func_Tima0 = 4u, ///< function set to timerA
|
|
Func_Tima1 = 5u, ///< function set to timerA
|
|
Func_Tima2 = 6u, ///< function set to timerA
|
|
Func_Emb = 6u, ///< function set to emb
|
|
Func_Usart_Ck = 7u, ///< function set to usart clk
|
|
Func_Spi_Nss = 7u, ///< function set to spi nss
|
|
Func_Qspi = 7u, ///< function set to qspi
|
|
Func_Key = 8u, ///< function set to key
|
|
Func_Sdio = 9u, ///< function set to sdio
|
|
Func_I2s = 10u, ///< function set to i2s
|
|
Func_UsbF = 10u, ///< function set to usb full speed
|
|
Func_Evnpt = 14u, ///< function set to event port
|
|
Func_Eventout = 15u, ///< function set to event out
|
|
Func_Usart1_Tx = 32u, ///< function set to usart tx of ch.1
|
|
Func_Usart3_Tx = 32u, ///< function set to usart tx of ch.3
|
|
Func_Usart1_Rx = 33u, ///< function set to usart rx of ch.1
|
|
Func_Usart3_Rx = 33u, ///< function set to usart rx of ch.3
|
|
Func_Usart1_Rts = 34u, ///< function set to usart rts of ch.1
|
|
Func_Usart3_Rts = 34u, ///< function set to usart rts of ch.3
|
|
Func_Usart1_Cts = 35u, ///< function set to usart cts of ch.1
|
|
Func_Usart3_Cts = 35u, ///< function set to usart cts of ch.3
|
|
Func_Usart2_Tx = 36u, ///< function set to usart tx of ch.2
|
|
Func_Usart4_Tx = 36u, ///< function set to usart tx of ch.4
|
|
Func_Usart2_Rx = 37u, ///< function set to usart rx of ch.2
|
|
Func_Usart4_Rx = 37u, ///< function set to usart rx of ch.4
|
|
Func_Usart2_Rts = 38u, ///< function set to usart rts of ch.2
|
|
Func_Usart4_Rts = 38u, ///< function set to usart rts of ch.4
|
|
Func_Usart2_Cts = 39u, ///< function set to usart cts of ch.2
|
|
Func_Usart4_Cts = 39u, ///< function set to usart cts of ch.4
|
|
Func_Spi1_Mosi = 40u, ///< function set to spi mosi of ch.1
|
|
Func_Spi3_Mosi = 40u, ///< function set to spi mosi of ch.3
|
|
Func_Spi1_Miso = 41u, ///< function set to spi miso of ch.1
|
|
Func_Spi3_Miso = 41u, ///< function set to spi miso of ch.3
|
|
Func_Spi1_Nss0 = 42u, ///< function set to spi nss0 of ch.1
|
|
Func_Spi3_Nss0 = 42u, ///< function set to spi nss0 of ch.3
|
|
Func_Spi1_Sck = 43u, ///< function set to spi sck of ch.1
|
|
Func_Spi3_Sck = 43u, ///< function set to spi sck of ch.3
|
|
Func_Spi2_Mosi = 44u, ///< function set to spi mosi of ch.2
|
|
Func_Spi4_Mosi = 44u, ///< function set to spi mosi of ch.2
|
|
Func_Spi2_Miso = 45u, ///< function set to spi miso of ch.4
|
|
Func_Spi4_Miso = 45u, ///< function set to spi miso of ch.4
|
|
Func_Spi2_Nss0 = 46u, ///< function set to spi nss0 of ch.2
|
|
Func_Spi4_Nss0 = 46u, ///< function set to spi nss0 of ch.4
|
|
Func_Spi2_Sck = 47u, ///< function set to spi sck of ch.2
|
|
Func_Spi4_Sck = 47u, ///< function set to spi sck of ch.4
|
|
Func_I2c1_Sda = 48u, ///< function set to i2c sda of ch.1
|
|
Func_I2c3_Sda = 48u, ///< function set to i2c sda of ch.3
|
|
Func_I2c1_Scl = 49u, ///< function set to i2c scl of ch.1
|
|
Func_I2c3_Scl = 49u, ///< function set to i2c scl of ch.3
|
|
Func_I2c2_Sda = 50u, ///< function set to i2c sda of ch.2
|
|
Func_Can1_Tx = 50u, ///< function set to can tx of ch.1
|
|
Func_I2c2_Scl = 51u, ///< function set to i2c scl of ch.2
|
|
Func_Can1_Rx = 51u, ///< function set to can rx of ch.1
|
|
Func_I2s1_Sd = 52u, ///< function set to i2s sd of ch.1
|
|
Func_I2s3_Sd = 52u, ///< function set to i2s sd of ch.3
|
|
Func_I2s1_Sdin = 53u, ///< function set to i2s sdin of ch.1
|
|
Func_I2s3_Sdin = 53u, ///< function set to i2s sdin of ch.3
|
|
Func_I2s1_Ws = 54u, ///< function set to i2s ws of ch.1
|
|
Func_I2s3_Ws = 54u, ///< function set to i2s ws of ch.3
|
|
Func_I2s1_Ck = 55u, ///< function set to i2s ck of ch.1
|
|
Func_I2s3_Ck = 55u, ///< function set to i2s ck of ch.3
|
|
Func_I2s2_Sd = 56u, ///< function set to i2s sd of ch.2
|
|
Func_I2s4_Sd = 56u, ///< function set to i2s sd of ch.4
|
|
Func_I2s2_Sdin = 57u, ///< function set to i2s sdin of ch.2
|
|
Func_I2s4_Sdin = 57u, ///< function set to i2s sdin of ch.4
|
|
Func_I2s2_Ws = 58u, ///< function set to i2s ws of ch.2
|
|
Func_I2s4_Ws = 58u, ///< function set to i2s ws of ch.4
|
|
Func_I2s2_Ck = 59u, ///< function set to i2s ck of ch.2
|
|
Func_I2s4_Ck = 59u, ///< function set to i2s ck of ch.4
|
|
}en_port_func_t;
|
|
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO init structure definition
|
|
******************************************************************************/
|
|
typedef struct stc_port_init
|
|
{
|
|
en_pin_mode_t enPinMode; ///< Set pin mode @ref en_pin_mode_t
|
|
en_functional_state_t enLatch; ///< Pin output latch enable
|
|
en_functional_state_t enExInt; ///< External int enable
|
|
en_functional_state_t enInvert; ///< Pin input/output invert enable
|
|
en_functional_state_t enPullUp; ///< Internal pull-up resistor enable
|
|
en_pin_drv_t enPinDrv; ///< Drive capacity setting @ref en_pin_drv_t
|
|
en_pin_o_type_t enPinOType; ///< Output mode setting @ref en_pin_o_type_t
|
|
en_functional_state_t enPinSubFunc; ///< Pin sub-function enable
|
|
}stc_port_init_t;
|
|
|
|
/**
|
|
*******************************************************************************
|
|
** \brief GPIO public setting structure definition
|
|
******************************************************************************/
|
|
typedef struct stc_port_pub_set
|
|
{
|
|
en_port_func_t enSubFuncSel; ///< Sub-function setting @ref en_port_func_t
|
|
en_read_wait_t enReadWait; ///< Read wait cycle setting @ref en_read_wait_t
|
|
}stc_port_pub_set_t;
|
|
|
|
/*******************************************************************************
|
|
* Global pre-processor symbols/macros ('#define')
|
|
******************************************************************************/
|
|
|
|
/*******************************************************************************
|
|
* Global variable definitions ('extern')
|
|
******************************************************************************/
|
|
|
|
/*******************************************************************************
|
|
Global function prototypes (definition in C source)
|
|
******************************************************************************/
|
|
extern en_result_t PORT_Init(en_port_t enPort, uint16_t u16Pin, \
|
|
const stc_port_init_t *pstcPortInit);
|
|
extern en_result_t PORT_DeInit(void);
|
|
extern void PORT_Unlock(void);
|
|
extern void PORT_Lock(void);
|
|
extern en_result_t PORT_DebugPortSetting(uint8_t u8DebugPort, en_functional_state_t enFunc);
|
|
extern en_result_t PORT_PubSetting(const stc_port_pub_set_t *pstcPortPubSet);
|
|
extern uint16_t PORT_GetData(en_port_t enPort);
|
|
extern en_flag_status_t PORT_GetBit(en_port_t enPort, en_pin_t enPin);
|
|
extern en_result_t PORT_SetPortData(en_port_t enPort, uint16_t u16Pin);
|
|
extern en_result_t PORT_ResetPortData(en_port_t enPort, uint16_t u16Pin);
|
|
extern en_result_t PORT_OE(en_port_t enPort, uint16_t u16Pin, en_functional_state_t enNewState);
|
|
extern en_result_t PORT_SetBits(en_port_t enPort, uint16_t u16Pin);
|
|
extern en_result_t PORT_ResetBits(en_port_t enPort, uint16_t u16Pin);
|
|
extern en_result_t PORT_Toggle(en_port_t enPort, uint16_t u16Pin);
|
|
extern en_result_t PORT_SetFunc(en_port_t enPort, uint16_t u16Pin, \
|
|
en_port_func_t enFuncSel, en_functional_state_t enSubFunc);
|
|
extern en_result_t PORT_SetSubFunc(en_port_func_t enFuncSel);
|
|
|
|
//@} // GpioGroup
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* DDL_GPIO_ENABLE */
|
|
|
|
#endif /* __HC32F460_GPIO_H__ */
|
|
|
|
/*******************************************************************************
|
|
* EOF (not truncated)
|
|
******************************************************************************/
|