714 lines
20 KiB
C
714 lines
20 KiB
C
/*****************************************************************************
|
|
* Copyright (c) 2019, Nations Technologies Inc.
|
|
*
|
|
* All rights reserved.
|
|
* ****************************************************************************
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the disclaimer below.
|
|
*
|
|
* Nations' name may not be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY NATIONS "AS IS" AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL NATIONS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
* ****************************************************************************/
|
|
|
|
/**
|
|
* @file drv_gpio.c
|
|
* @author Nations
|
|
* @version v1.0.0
|
|
*
|
|
* @copyright Copyright (c) 2019, Nations Technologies Inc. All rights reserved.
|
|
*/
|
|
#include <rtdevice.h>
|
|
#include <rthw.h>
|
|
#include "board.h"
|
|
|
|
#ifdef RT_USING_PIN
|
|
|
|
static const struct pin_index pins[] =
|
|
{
|
|
#if defined(GPIOA)
|
|
__N32_PIN(0 , GPIOA, GPIO_PIN_0 ),
|
|
__N32_PIN(1 , GPIOA, GPIO_PIN_1 ),
|
|
__N32_PIN(2 , GPIOA, GPIO_PIN_2 ),
|
|
__N32_PIN(3 , GPIOA, GPIO_PIN_3 ),
|
|
__N32_PIN(4 , GPIOA, GPIO_PIN_4 ),
|
|
__N32_PIN(5 , GPIOA, GPIO_PIN_5 ),
|
|
__N32_PIN(6 , GPIOA, GPIO_PIN_6 ),
|
|
__N32_PIN(7 , GPIOA, GPIO_PIN_7 ),
|
|
__N32_PIN(8 , GPIOA, GPIO_PIN_8 ),
|
|
__N32_PIN(9 , GPIOA, GPIO_PIN_9 ),
|
|
__N32_PIN(10, GPIOA, GPIO_PIN_10),
|
|
__N32_PIN(11, GPIOA, GPIO_PIN_11),
|
|
__N32_PIN(12, GPIOA, GPIO_PIN_12),
|
|
__N32_PIN(13, GPIOA, GPIO_PIN_13),
|
|
__N32_PIN(14, GPIOA, GPIO_PIN_14),
|
|
__N32_PIN(15, GPIOA, GPIO_PIN_15),
|
|
#if defined(GPIOB)
|
|
__N32_PIN(16, GPIOB, GPIO_PIN_0),
|
|
__N32_PIN(17, GPIOB, GPIO_PIN_1),
|
|
__N32_PIN(18, GPIOB, GPIO_PIN_2),
|
|
__N32_PIN(19, GPIOB, GPIO_PIN_3),
|
|
__N32_PIN(20, GPIOB, GPIO_PIN_4),
|
|
__N32_PIN(21, GPIOB, GPIO_PIN_5),
|
|
__N32_PIN(22, GPIOB, GPIO_PIN_6),
|
|
__N32_PIN(23, GPIOB, GPIO_PIN_7),
|
|
__N32_PIN(24, GPIOB, GPIO_PIN_8),
|
|
__N32_PIN(25, GPIOB, GPIO_PIN_9),
|
|
__N32_PIN(26, GPIOB, GPIO_PIN_10),
|
|
__N32_PIN(27, GPIOB, GPIO_PIN_11),
|
|
__N32_PIN(28, GPIOB, GPIO_PIN_12),
|
|
__N32_PIN(29, GPIOB, GPIO_PIN_13),
|
|
__N32_PIN(30, GPIOB, GPIO_PIN_14),
|
|
__N32_PIN(31, GPIOB, GPIO_PIN_15),
|
|
#if defined(GPIOC)
|
|
__N32_PIN(32, GPIOC, GPIO_PIN_0),
|
|
__N32_PIN(33, GPIOC, GPIO_PIN_1),
|
|
__N32_PIN(34, GPIOC, GPIO_PIN_2),
|
|
__N32_PIN(35, GPIOC, GPIO_PIN_3),
|
|
__N32_PIN(36, GPIOC, GPIO_PIN_4),
|
|
__N32_PIN(37, GPIOC, GPIO_PIN_5),
|
|
__N32_PIN(38, GPIOC, GPIO_PIN_6),
|
|
__N32_PIN(39, GPIOC, GPIO_PIN_7),
|
|
__N32_PIN(40, GPIOC, GPIO_PIN_8),
|
|
__N32_PIN(41, GPIOC, GPIO_PIN_9),
|
|
__N32_PIN(42, GPIOC, GPIO_PIN_10),
|
|
__N32_PIN(43, GPIOC, GPIO_PIN_11),
|
|
__N32_PIN(44, GPIOC, GPIO_PIN_12),
|
|
__N32_PIN(45, GPIOC, GPIO_PIN_13),
|
|
__N32_PIN(46, GPIOC, GPIO_PIN_14),
|
|
__N32_PIN(47, GPIOC, GPIO_PIN_15),
|
|
#if defined(GPIOD)
|
|
__N32_PIN(48, GPIOD, GPIO_PIN_0),
|
|
__N32_PIN(49, GPIOD, GPIO_PIN_1),
|
|
__N32_PIN(50, GPIOD, GPIO_PIN_2),
|
|
__N32_PIN(51, GPIOD, GPIO_PIN_3),
|
|
__N32_PIN(52, GPIOD, GPIO_PIN_4),
|
|
__N32_PIN(53, GPIOD, GPIO_PIN_5),
|
|
__N32_PIN(54, GPIOD, GPIO_PIN_6),
|
|
__N32_PIN(55, GPIOD, GPIO_PIN_7),
|
|
__N32_PIN(56, GPIOD, GPIO_PIN_8),
|
|
__N32_PIN(57, GPIOD, GPIO_PIN_9),
|
|
__N32_PIN(58, GPIOD, GPIO_PIN_10),
|
|
__N32_PIN(59, GPIOD, GPIO_PIN_11),
|
|
__N32_PIN(60, GPIOD, GPIO_PIN_12),
|
|
__N32_PIN(61, GPIOD, GPIO_PIN_13),
|
|
__N32_PIN(62, GPIOD, GPIO_PIN_14),
|
|
__N32_PIN(63, GPIOD, GPIO_PIN_15),
|
|
#if defined(GPIOE)
|
|
__N32_PIN(64, GPIOE, GPIO_PIN_0),
|
|
__N32_PIN(65, GPIOE, GPIO_PIN_1),
|
|
__N32_PIN(66, GPIOE, GPIO_PIN_2),
|
|
__N32_PIN(67, GPIOE, GPIO_PIN_3),
|
|
__N32_PIN(68, GPIOE, GPIO_PIN_4),
|
|
__N32_PIN(69, GPIOE, GPIO_PIN_5),
|
|
__N32_PIN(70, GPIOE, GPIO_PIN_6),
|
|
__N32_PIN(71, GPIOE, GPIO_PIN_7),
|
|
__N32_PIN(72, GPIOE, GPIO_PIN_8),
|
|
__N32_PIN(73, GPIOE, GPIO_PIN_9),
|
|
__N32_PIN(74, GPIOE, GPIO_PIN_10),
|
|
__N32_PIN(75, GPIOE, GPIO_PIN_11),
|
|
__N32_PIN(76, GPIOE, GPIO_PIN_12),
|
|
__N32_PIN(77, GPIOE, GPIO_PIN_13),
|
|
__N32_PIN(78, GPIOE, GPIO_PIN_14),
|
|
__N32_PIN(79, GPIOE, GPIO_PIN_15),
|
|
#if defined(GPIOF)
|
|
__N32_PIN(80, GPIOF, GPIO_PIN_0),
|
|
__N32_PIN(81, GPIOF, GPIO_PIN_1),
|
|
__N32_PIN(82, GPIOF, GPIO_PIN_2),
|
|
__N32_PIN(83, GPIOF, GPIO_PIN_3),
|
|
__N32_PIN(84, GPIOF, GPIO_PIN_4),
|
|
__N32_PIN(85, GPIOF, GPIO_PIN_5),
|
|
__N32_PIN(86, GPIOF, GPIO_PIN_6),
|
|
__N32_PIN(87, GPIOF, GPIO_PIN_7),
|
|
__N32_PIN(88, GPIOF, GPIO_PIN_8),
|
|
__N32_PIN(89, GPIOF, GPIO_PIN_9),
|
|
__N32_PIN(90, GPIOF, GPIO_PIN_10),
|
|
__N32_PIN(91, GPIOF, GPIO_PIN_11),
|
|
__N32_PIN(92, GPIOF, GPIO_PIN_12),
|
|
__N32_PIN(93, GPIOF, GPIO_PIN_13),
|
|
__N32_PIN(94, GPIOF, GPIO_PIN_14),
|
|
__N32_PIN(95, GPIOF, GPIO_PIN_15),
|
|
#if defined(GPIOG)
|
|
__N32_PIN(96, GPIOG, GPIO_PIN_0),
|
|
__N32_PIN(97, GPIOG, GPIO_PIN_1),
|
|
__N32_PIN(98, GPIOG, GPIO_PIN_2),
|
|
__N32_PIN(99, GPIOG, GPIO_PIN_3),
|
|
__N32_PIN(100, GPIOG, GPIO_PIN_4),
|
|
__N32_PIN(101, GPIOG, GPIO_PIN_5),
|
|
__N32_PIN(102, GPIOG, GPIO_PIN_6),
|
|
__N32_PIN(103, GPIOG, GPIO_PIN_7),
|
|
__N32_PIN(104, GPIOG, GPIO_PIN_8),
|
|
__N32_PIN(105, GPIOG, GPIO_PIN_9),
|
|
__N32_PIN(106, GPIOG, GPIO_PIN_10),
|
|
__N32_PIN(107, GPIOG, GPIO_PIN_11),
|
|
__N32_PIN(108, GPIOG, GPIO_PIN_12),
|
|
__N32_PIN(109, GPIOG, GPIO_PIN_13),
|
|
__N32_PIN(110, GPIOG, GPIO_PIN_14),
|
|
__N32_PIN(111, GPIOG, GPIO_PIN_15),
|
|
|
|
#endif /* defined(GPIOG) */
|
|
#endif /* defined(GPIOF) */
|
|
#endif /* defined(GPIOE) */
|
|
#endif /* defined(GPIOD) */
|
|
#endif /* defined(GPIOC) */
|
|
#endif /* defined(GPIOB) */
|
|
#endif /* defined(GPIOA) */
|
|
};
|
|
|
|
static const struct pin_irq_map pin_irq_map[] =
|
|
{
|
|
{GPIO_PIN_0, EXTI0_IRQn},
|
|
{GPIO_PIN_1, EXTI1_IRQn},
|
|
{GPIO_PIN_2, EXTI2_IRQn},
|
|
{GPIO_PIN_3, EXTI3_IRQn},
|
|
{GPIO_PIN_4, EXTI4_IRQn},
|
|
{GPIO_PIN_5, EXTI9_5_IRQn},
|
|
{GPIO_PIN_6, EXTI9_5_IRQn},
|
|
{GPIO_PIN_7, EXTI9_5_IRQn},
|
|
{GPIO_PIN_8, EXTI9_5_IRQn},
|
|
{GPIO_PIN_9, EXTI9_5_IRQn},
|
|
{GPIO_PIN_10, EXTI15_10_IRQn},
|
|
{GPIO_PIN_11, EXTI15_10_IRQn},
|
|
{GPIO_PIN_12, EXTI15_10_IRQn},
|
|
{GPIO_PIN_13, EXTI15_10_IRQn},
|
|
{GPIO_PIN_14, EXTI15_10_IRQn},
|
|
{GPIO_PIN_15, EXTI15_10_IRQn},
|
|
};
|
|
|
|
static struct rt_pin_irq_hdr pin_irq_hdr_tab[] =
|
|
{
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
{-1, 0, RT_NULL, RT_NULL},
|
|
};
|
|
static uint32_t pin_irq_enable_mask=0;
|
|
|
|
#define ITEM_NUM(items) sizeof(items) / sizeof(items[0])
|
|
static const struct pin_index *get_pin(uint8_t pin)
|
|
{
|
|
const struct pin_index *index;
|
|
|
|
if (pin < ITEM_NUM(pins))
|
|
{
|
|
index = &pins[pin];
|
|
if (index->index == -1)
|
|
index = RT_NULL;
|
|
}
|
|
else
|
|
{
|
|
index = RT_NULL;
|
|
}
|
|
|
|
return index;
|
|
};
|
|
|
|
static void n32_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
|
|
{
|
|
const struct pin_index *index;
|
|
|
|
index = get_pin(pin);
|
|
if (index == RT_NULL)
|
|
{
|
|
return;
|
|
}
|
|
GPIO_WriteBit(index->gpio, index->pin, (Bit_OperateType)value);
|
|
}
|
|
|
|
static int n32_pin_read(rt_device_t dev, rt_base_t pin)
|
|
{
|
|
int value;
|
|
const struct pin_index *index;
|
|
|
|
value = PIN_LOW;
|
|
|
|
index = get_pin(pin);
|
|
if (index == RT_NULL)
|
|
{
|
|
return value;
|
|
}
|
|
|
|
value = GPIO_ReadInputDataBit(index->gpio, index->pin);
|
|
|
|
return value;
|
|
}
|
|
|
|
static void n32_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
|
|
{
|
|
const struct pin_index *index;
|
|
GPIO_InitType GPIO_InitStructure;
|
|
|
|
index = get_pin(pin);
|
|
if (index == RT_NULL)
|
|
{
|
|
return;
|
|
}
|
|
|
|
GPIO_InitStruct(&GPIO_InitStructure);
|
|
|
|
/* Configure GPIO_InitStructure */
|
|
GPIO_InitStructure.Pin = index->pin;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
|
|
if (mode == PIN_MODE_OUTPUT)
|
|
{
|
|
/* output setting */
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
|
|
}
|
|
else if (mode == PIN_MODE_INPUT)
|
|
{
|
|
/* input setting: not pull. */
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
}
|
|
else if (mode == PIN_MODE_INPUT_PULLUP)
|
|
{
|
|
/* input setting: pull up. */
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
|
|
}
|
|
else if (mode == PIN_MODE_INPUT_PULLDOWN)
|
|
{
|
|
/* input setting: pull down. */
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
|
|
}
|
|
else if (mode == PIN_MODE_OUTPUT_OD)
|
|
{
|
|
/* output setting: od. */
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
|
|
}
|
|
GPIOInit(index->gpio, GPIO_InitStructure.GPIO_Mode, GPIO_InitStructure.GPIO_Speed, GPIO_InitStructure.Pin);
|
|
}
|
|
|
|
rt_inline rt_int32_t bit2bitno(rt_uint32_t bit)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 32; i++)
|
|
{
|
|
if ((0x01 << i) == bit)
|
|
{
|
|
return i;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
rt_inline rt_int32_t port2portsource(GPIO_Module* module)
|
|
{
|
|
if(module == GPIOA)
|
|
{
|
|
return GPIOA_PORT_SOURCE;
|
|
}
|
|
else if(module == GPIOB)
|
|
{
|
|
return GPIOB_PORT_SOURCE;
|
|
}
|
|
else if(module == GPIOC)
|
|
{
|
|
return GPIOC_PORT_SOURCE;
|
|
}
|
|
else if(module == GPIOD)
|
|
{
|
|
return GPIOD_PORT_SOURCE;
|
|
}
|
|
else if(module == GPIOE)
|
|
{
|
|
return GPIOE_PORT_SOURCE;
|
|
}
|
|
else if(module == GPIOF)
|
|
{
|
|
return GPIOF_PORT_SOURCE;
|
|
}
|
|
else if(module == GPIOG)
|
|
{
|
|
return GPIOG_PORT_SOURCE;
|
|
}
|
|
else
|
|
{
|
|
return GPIOA_PORT_SOURCE;
|
|
}
|
|
}
|
|
|
|
rt_inline const struct pin_irq_map *get_pin_irq_map(uint32_t pinbit)
|
|
{
|
|
rt_int32_t mapindex = bit2bitno(pinbit);
|
|
if (mapindex < 0 || mapindex >= ITEM_NUM(pin_irq_map))
|
|
{
|
|
return RT_NULL;
|
|
}
|
|
return &pin_irq_map[mapindex];
|
|
};
|
|
|
|
static rt_err_t n32_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
|
|
rt_uint32_t mode, void (*hdr)(void *args), void *args)
|
|
{
|
|
const struct pin_index *index;
|
|
rt_base_t level;
|
|
rt_int32_t irqindex = -1;
|
|
|
|
index = get_pin(pin);
|
|
if (index == RT_NULL)
|
|
{
|
|
return RT_ENOSYS;
|
|
}
|
|
irqindex = bit2bitno(index->pin);
|
|
if (irqindex < 0 || irqindex >= ITEM_NUM(pin_irq_map))
|
|
{
|
|
return RT_ENOSYS;
|
|
}
|
|
|
|
level = rt_hw_interrupt_disable();
|
|
if (pin_irq_hdr_tab[irqindex].pin == pin &&
|
|
pin_irq_hdr_tab[irqindex].hdr == hdr &&
|
|
pin_irq_hdr_tab[irqindex].mode == mode &&
|
|
pin_irq_hdr_tab[irqindex].args == args)
|
|
{
|
|
rt_hw_interrupt_enable(level);
|
|
return RT_EOK;
|
|
}
|
|
if (pin_irq_hdr_tab[irqindex].pin != -1)
|
|
{
|
|
rt_hw_interrupt_enable(level);
|
|
return RT_EBUSY;
|
|
}
|
|
pin_irq_hdr_tab[irqindex].pin = pin;
|
|
pin_irq_hdr_tab[irqindex].hdr = hdr;
|
|
pin_irq_hdr_tab[irqindex].mode = mode;
|
|
pin_irq_hdr_tab[irqindex].args = args;
|
|
rt_hw_interrupt_enable(level);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t n32_pin_dettach_irq(struct rt_device *device, rt_int32_t pin)
|
|
{
|
|
const struct pin_index *index;
|
|
rt_base_t level;
|
|
rt_int32_t irqindex = -1;
|
|
|
|
index = get_pin(pin);
|
|
if (index == RT_NULL)
|
|
{
|
|
return RT_ENOSYS;
|
|
}
|
|
irqindex = bit2bitno(index->pin);
|
|
if (irqindex < 0 || irqindex >= ITEM_NUM(pin_irq_map))
|
|
{
|
|
return RT_ENOSYS;
|
|
}
|
|
|
|
level = rt_hw_interrupt_disable();
|
|
if (pin_irq_hdr_tab[irqindex].pin == -1)
|
|
{
|
|
rt_hw_interrupt_enable(level);
|
|
return RT_EOK;
|
|
}
|
|
pin_irq_hdr_tab[irqindex].pin = -1;
|
|
pin_irq_hdr_tab[irqindex].hdr = RT_NULL;
|
|
pin_irq_hdr_tab[irqindex].mode = 0;
|
|
pin_irq_hdr_tab[irqindex].args = RT_NULL;
|
|
rt_hw_interrupt_enable(level);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t n32_pin_irq_enable(struct rt_device *device, rt_base_t pin,
|
|
rt_uint32_t enabled)
|
|
{
|
|
const struct pin_index *index;
|
|
const struct pin_irq_map *irqmap;
|
|
rt_base_t level;
|
|
rt_int32_t irqindex = -1;
|
|
GPIO_InitType GPIO_InitStructure;
|
|
EXTI_InitType EXTI_InitStructure;
|
|
|
|
index = get_pin(pin);
|
|
if (index == RT_NULL)
|
|
{
|
|
return RT_ENOSYS;
|
|
}
|
|
|
|
if (enabled == PIN_IRQ_ENABLE)
|
|
{
|
|
irqindex = bit2bitno(index->pin);
|
|
if (irqindex < 0 || irqindex >= ITEM_NUM(pin_irq_map))
|
|
{
|
|
return RT_ENOSYS;
|
|
}
|
|
|
|
level = rt_hw_interrupt_disable();
|
|
|
|
if (pin_irq_hdr_tab[irqindex].pin == -1)
|
|
{
|
|
rt_hw_interrupt_enable(level);
|
|
return RT_ENOSYS;
|
|
}
|
|
|
|
irqmap = &pin_irq_map[irqindex];
|
|
|
|
/* Configure GPIO_InitStructure */
|
|
GPIO_InitStruct(&GPIO_InitStructure);
|
|
GPIO_InitStructure.Pin = index->pin;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
switch (pin_irq_hdr_tab[irqindex].mode)
|
|
{
|
|
case PIN_IRQ_MODE_RISING:
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
|
|
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
|
|
break;
|
|
case PIN_IRQ_MODE_FALLING:
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
|
|
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
|
|
break;
|
|
case PIN_IRQ_MODE_RISING_FALLING:
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling;
|
|
break;
|
|
}
|
|
GPIO_InitPeripheral(index->gpio, &GPIO_InitStructure);
|
|
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_AFIO, ENABLE);
|
|
/* configure EXTI line */
|
|
GPIO_ConfigEXTILine(port2portsource(index->gpio), irqindex);
|
|
|
|
/*Configure key EXTI line*/
|
|
EXTI_InitStructure.EXTI_Line = index->pin;
|
|
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
|
|
EXTI_InitStructure.EXTI_LineCmd = ENABLE;
|
|
EXTI_InitPeripheral(&EXTI_InitStructure);
|
|
|
|
EXTI_ClrITPendBit(index->pin);
|
|
NVIC_SetPriority(irqmap->irqno, 5);
|
|
NVIC_EnableIRQ(irqmap->irqno);
|
|
pin_irq_enable_mask |= irqmap->pinbit;
|
|
|
|
rt_hw_interrupt_enable(level);
|
|
}
|
|
else if (enabled == PIN_IRQ_DISABLE)
|
|
{
|
|
irqmap = get_pin_irq_map(index->pin);
|
|
if (irqmap == RT_NULL)
|
|
{
|
|
return RT_ENOSYS;
|
|
}
|
|
|
|
level = rt_hw_interrupt_disable();
|
|
|
|
pin_irq_enable_mask &= ~irqmap->pinbit;
|
|
if (( irqmap->pinbit>=GPIO_PIN_5 )&&( irqmap->pinbit<=GPIO_PIN_9 ))
|
|
{
|
|
if(!(pin_irq_enable_mask&(GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9)))
|
|
{
|
|
NVIC_DisableIRQ(irqmap->irqno);
|
|
}
|
|
}
|
|
else if (( irqmap->pinbit>=GPIO_PIN_10 )&&( irqmap->pinbit<=GPIO_PIN_15 ))
|
|
{
|
|
if(!(pin_irq_enable_mask&(GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15)))
|
|
{
|
|
NVIC_DisableIRQ(irqmap->irqno);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
NVIC_DisableIRQ(irqmap->irqno);
|
|
}
|
|
|
|
rt_hw_interrupt_enable(level);
|
|
}
|
|
else
|
|
{
|
|
return -RT_ENOSYS;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
const static struct rt_pin_ops _n32_pin_ops =
|
|
{
|
|
n32_pin_mode,
|
|
n32_pin_write,
|
|
n32_pin_read,
|
|
n32_pin_attach_irq,
|
|
n32_pin_dettach_irq,
|
|
n32_pin_irq_enable,
|
|
};
|
|
|
|
int rt_hw_pin_init(void)
|
|
{
|
|
#if defined(RCC_GPIOA_CLK_ENABLE)
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOA, ENABLE);
|
|
#endif
|
|
|
|
#if defined(RCC_GPIOB_CLK_ENABLE)
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOB, ENABLE);
|
|
#endif
|
|
|
|
#if defined(RCC_GPIOC_CLK_ENABLE)
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOC, ENABLE);
|
|
#endif
|
|
|
|
#if defined(RCC_GPIOD_CLK_ENABLE)
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOD, ENABLE);
|
|
#endif
|
|
|
|
#if defined(RCC_GPIOE_CLK_ENABLE)
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOE, ENABLE);
|
|
#endif
|
|
|
|
#if defined(RCC_GPIOF_CLK_ENABLE)
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOF, ENABLE);
|
|
#endif
|
|
|
|
#if defined(RCC_GPIOG_CLK_ENABLE)
|
|
__RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOG, ENABLE);
|
|
#endif
|
|
|
|
return rt_device_pin_register("pin", &_n32_pin_ops, RT_NULL);
|
|
}
|
|
|
|
INIT_BOARD_EXPORT(rt_hw_pin_init);
|
|
|
|
rt_inline void pin_irq_hdr(int irqno)
|
|
{
|
|
if (pin_irq_hdr_tab[irqno].hdr)
|
|
{
|
|
pin_irq_hdr_tab[irqno].hdr(pin_irq_hdr_tab[irqno].args);
|
|
}
|
|
}
|
|
|
|
void N32_GPIO_EXTI_IRQHandler(rt_int8_t exti_line)
|
|
{
|
|
if(RESET != EXTI_GetITStatus(1 << exti_line))
|
|
{
|
|
pin_irq_hdr(exti_line);
|
|
EXTI_ClrITPendBit(1 << exti_line);
|
|
}
|
|
}
|
|
|
|
void EXTI0_IRQHandler(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
N32_GPIO_EXTI_IRQHandler(0);
|
|
rt_interrupt_leave();
|
|
}
|
|
void EXTI1_IRQHandler(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
N32_GPIO_EXTI_IRQHandler(1);
|
|
rt_interrupt_leave();
|
|
}
|
|
void EXTI2_IRQHandler(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
N32_GPIO_EXTI_IRQHandler(2);
|
|
rt_interrupt_leave();
|
|
}
|
|
void EXTI3_IRQHandler(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
N32_GPIO_EXTI_IRQHandler(3);
|
|
rt_interrupt_leave();
|
|
}
|
|
void EXTI4_IRQHandler(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
N32_GPIO_EXTI_IRQHandler(4);
|
|
rt_interrupt_leave();
|
|
}
|
|
void EXTI9_5_IRQHandler(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
N32_GPIO_EXTI_IRQHandler(5);
|
|
N32_GPIO_EXTI_IRQHandler(6);
|
|
N32_GPIO_EXTI_IRQHandler(7);
|
|
N32_GPIO_EXTI_IRQHandler(8);
|
|
N32_GPIO_EXTI_IRQHandler(9);
|
|
rt_interrupt_leave();
|
|
}
|
|
void EXTI15_10_IRQHandler(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
N32_GPIO_EXTI_IRQHandler(10);
|
|
N32_GPIO_EXTI_IRQHandler(11);
|
|
N32_GPIO_EXTI_IRQHandler(12);
|
|
N32_GPIO_EXTI_IRQHandler(13);
|
|
N32_GPIO_EXTI_IRQHandler(14);
|
|
N32_GPIO_EXTI_IRQHandler(15);
|
|
rt_interrupt_leave();
|
|
}
|
|
|
|
void GPIOInit(GPIO_Module* GPIOx, GPIO_ModeType mode, GPIO_SpeedType speed, uint16_t Pin)
|
|
{
|
|
GPIO_InitType GPIO_InitStructure;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
|
|
|
|
/* Enable the GPIO Clock */
|
|
if (GPIOx == GPIOA)
|
|
{
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOA, ENABLE);
|
|
}
|
|
else if (GPIOx == GPIOB)
|
|
{
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOB, ENABLE);
|
|
}
|
|
else if (GPIOx == GPIOC)
|
|
{
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOC, ENABLE);
|
|
}
|
|
else if (GPIOx == GPIOD)
|
|
{
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOD, ENABLE);
|
|
}
|
|
else if (GPIOx == GPIOE)
|
|
{
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOE, ENABLE);
|
|
}
|
|
else if (GPIOx == GPIOF)
|
|
{
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOF, ENABLE);
|
|
}
|
|
else
|
|
{
|
|
if (GPIOx == GPIOG)
|
|
{
|
|
RCC_EnableAPB2PeriphClk(RCC_APB2_PERIPH_GPIOG, ENABLE);
|
|
}
|
|
}
|
|
|
|
/* Configure the GPIO pin */
|
|
GPIO_InitStructure.Pin = Pin;
|
|
GPIO_InitStructure.GPIO_Mode = mode;
|
|
GPIO_InitStructure.GPIO_Speed = speed;
|
|
GPIO_InitPeripheral(GPIOx, &GPIO_InitStructure);
|
|
|
|
}
|
|
|
|
|
|
#endif /* RT_USING_PIN */
|