rt-thread-official/bsp/raspberry-pi/raspi4-32/driver/drv_spi.c

298 lines
8.5 KiB
C

/*
* Copyright (c) 2006-2020, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2020-06-22 bigmagic first version
*/
#include <rtthread.h>
#include <rthw.h>
#include <rtdevice.h>
#include "raspi4.h"
#include "drv_spi.h"
#ifdef RT_USING_SPI
#define RPI_CORE_CLK_HZ (500 * 1000 * 1000)
#define SPITIMEOUT 0x0FFF
static rt_uint8_t raspi_byte_reverse_table[] =
{
0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff
};
#if defined (BSP_USING_SPI0_BUS)
#define SPI0_BUS_NAME "spi0"
#define SPI0_DEVICE0_NAME "spi0.0"
#define SPI0_DEVICE1_NAME "spi0.1"
struct rt_spi_bus spi0_bus;
#if defined (BSP_USING_SPI0_DEVICE0)
static struct rt_spi_device spi0_device0;
#endif
#if defined (BSP_USING_SPI0_DEVICE1)
static struct rt_spi_device spi0_device1;
#endif
#endif
static rt_err_t raspi_spi_configure(struct rt_spi_device *device, struct rt_spi_configuration *cfg)
{
RT_ASSERT(cfg != RT_NULL);
RT_ASSERT(device != RT_NULL);
struct raspi_spi_device* hw_config = (struct raspi_spi_device *)(device->parent.user_data);
struct raspi_spi_hw_config *hwcfg = (struct raspi_spi_hw_config *)hw_config->spi_hw_config;
// spi clear fifo
SPI_REG_CS(hwcfg->hw_base) |= (SPI_CS_CLEAR_TX | SPI_CS_CLEAR_RX);
if(cfg->mode & RT_SPI_CPOL)
{
SPI_REG_CS(hwcfg->hw_base) |= SPI_CS_CPOL;
}
else
{
SPI_REG_CS(hwcfg->hw_base) &= ~SPI_CS_CPOL;
}
if(cfg->mode & RT_SPI_CPHA)
{
SPI_REG_CS(hwcfg->hw_base) |= SPI_CS_CPHA;
}else
{
SPI_REG_CS(hwcfg->hw_base) &= ~SPI_CS_CPHA;
}
if(cfg->mode & RT_SPI_CS_HIGH)
{
SPI_REG_CS(hwcfg->hw_base) |= SPI_CS_CSPOL_HIGH;
}
else
{
SPI_REG_CS(hwcfg->hw_base) &= ~SPI_CS_CSPOL_HIGH;
}
return RT_EOK;
}
rt_uint8_t correct_order(rt_uint8_t b, rt_uint8_t flag)
{
if (flag)
return raspi_byte_reverse_table[b];//reverse
else
return b;
}
static rt_err_t spi_transfernb(struct raspi_spi_hw_config *hwcfg, rt_uint8_t* tbuf, rt_uint8_t* rbuf, rt_uint32_t len, rt_uint8_t flag)
{
rt_uint32_t TXCnt=0;
rt_uint32_t RXCnt=0;
/* Use the FIFO's to reduce the interbyte times */
while ((TXCnt < len) || (RXCnt < len))
{
/* TX fifo not full, so add some more bytes */
while (((SPI_REG_CS(hwcfg->hw_base) & SPI_CS_TX_DATA)) && (TXCnt < len))
{
SPI_REG_FIFO(hwcfg->hw_base) = correct_order(tbuf[TXCnt],flag);
TXCnt++;
}
/* Rx fifo not empty, so get the next received bytes */
while (((SPI_REG_CS(hwcfg->hw_base) & SPI_CS_RX_DATA)) && (RXCnt < len))
{
rbuf[RXCnt] = correct_order(SPI_REG_FIFO(hwcfg->hw_base), flag);
RXCnt++;
}
}
/* Wait for DONE to be set */
while (!(SPI_REG_CS(hwcfg->hw_base) & SPI_CS_DONE));
return RT_EOK;
}
static rt_uint32_t raspi_spi_xfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
rt_err_t res;
rt_uint8_t flag;
RT_ASSERT(device != RT_NULL);
RT_ASSERT(device->bus != RT_NULL);
RT_ASSERT(device->parent.user_data != RT_NULL);
RT_ASSERT(message->send_buf != RT_NULL || message->recv_buf != RT_NULL);
struct rt_spi_configuration config = device->config;
struct raspi_spi_device * hw_config = (struct raspi_spi_device *)device->parent.user_data;
GPIO_PIN cs_pin = (GPIO_PIN)hw_config->cs_pin;
struct raspi_spi_hw_config *hwcfg = (struct raspi_spi_hw_config *)hw_config->spi_hw_config;
//mode MSB
if (config.mode & RT_SPI_MSB)
{
flag = 1;
}
else
{
flag = 0;
}
//max_hz
if(config.max_hz == 0)
{
SPI_REG_CLK(hwcfg->hw_base) = 0;
}
else
{
SPI_REG_CLK(hwcfg->hw_base) = (RPI_CORE_CLK_HZ / (config.max_hz));
}
//cs_pin spi0.0
if(cs_pin == GPIO_PIN_8)
{
SPI_REG_CS(hwcfg->hw_base) &= (~(3 << 0));
}
else if(cs_pin == GPIO_PIN_7)//spi0.1
{
SPI_REG_CS(hwcfg->hw_base) |= SPI_CS_CHIP_SELECT_1;
}
//Clear TX and RX fifos
SPI_REG_CS(hwcfg->hw_base) |= (SPI_CS_CLEAR_TX | SPI_CS_CLEAR_RX);
if (message->cs_take)
{
SPI_REG_CS(hwcfg->hw_base) |= SPI_CS_TA;
}
res = spi_transfernb(hwcfg, (rt_uint8_t *)message->send_buf, (rt_uint8_t *)message->recv_buf, (rt_int32_t)message->length, flag);
if (message->cs_release)
{
//Set TA = 0, and also set the barrier
SPI_REG_CS(hwcfg->hw_base) &= (~SPI_CS_TA);
}
if (res != RT_EOK)
return RT_ERROR;
return message->length;
}
rt_err_t raspi_spi_bus_attach_device(const char *bus_name, struct raspi_spi_device *device)
{
rt_err_t ret;
RT_ASSERT(device != RT_NULL);
ret = rt_spi_bus_attach_device(device->spi_device, device->device_name, bus_name, (void *)(device));
return ret;
}
rt_err_t raspi_spi_hw_init(struct raspi_spi_hw_config *hwcfg)
{
prev_raspi_pin_mode(hwcfg->sclk_pin, hwcfg->sclk_mode);
prev_raspi_pin_mode(hwcfg->miso_pin, hwcfg->miso_mode);
prev_raspi_pin_mode(hwcfg->mosi_pin, hwcfg->mosi_mode);
#if defined (BSP_USING_SPI0_DEVICE0)
prev_raspi_pin_mode(hwcfg->ce0_pin, hwcfg->ce0_mode);
#endif
#if defined (BSP_USING_SPI0_DEVICE1)
prev_raspi_pin_mode(hwcfg->ce1_pin, hwcfg->ce1_mode);
#endif
//clear rx and tx
SPI_REG_CS(hwcfg->hw_base) = (SPI_CS_CLEAR_TX | SPI_CS_CLEAR_RX);
return RT_EOK;
}
static struct rt_spi_ops raspi_spi_ops =
{
.configure = raspi_spi_configure,
.xfer = raspi_spi_xfer
};
struct raspi_spi_hw_config raspi_spi0_hw =
{
.spi_num = 0,
.sclk_pin = GPIO_PIN_11,
.sclk_mode = ALT0,
.mosi_pin = GPIO_PIN_10,
.mosi_mode = ALT0,
.miso_pin = GPIO_PIN_9,
.miso_mode = ALT0,
#if defined (BSP_USING_SPI0_DEVICE0)
.ce0_pin = GPIO_PIN_8,
.ce0_mode = ALT0,
#endif
#if defined (BSP_USING_SPI0_DEVICE1)
.ce1_pin = GPIO_PIN_7,
.ce1_mode = ALT0,
#endif
.hw_base = SPI_0_BASE,
};
#endif
#if defined (BSP_USING_SPI0_DEVICE0)
struct raspi_spi_device raspi_spi0_device0 =
{
.device_name = SPI0_DEVICE0_NAME,
.spi_bus = &spi0_bus,
.spi_device = &spi0_device0,
.spi_hw_config = &raspi_spi0_hw,
.cs_pin = GPIO_PIN_8,
};
#endif
#if defined (BSP_USING_SPI0_DEVICE1)
struct raspi_spi_device raspi_spi0_device1 =
{
.device_name = SPI0_DEVICE1_NAME,
.spi_bus = &spi0_bus,
.spi_device = &spi0_device1,
.spi_hw_config = &raspi_spi0_hw,
.cs_pin = GPIO_PIN_7,
};
#endif
int rt_hw_spi_init(void)
{
#if defined (BSP_USING_SPI0_BUS)
raspi_spi_hw_init(&raspi_spi0_hw);
rt_spi_bus_register(&spi0_bus, SPI0_BUS_NAME, &raspi_spi_ops);
#if defined (BSP_USING_SPI0_DEVICE0)
raspi_spi_bus_attach_device(SPI0_BUS_NAME, &raspi_spi0_device0);
#endif
#if defined (BSP_USING_SPI0_DEVICE1)
raspi_spi_bus_attach_device(SPI0_BUS_NAME, &raspi_spi0_device1);
#endif
#endif
return RT_EOK;
}
INIT_DEVICE_EXPORT(rt_hw_spi_init);