rt-thread-official/components/drivers/Kconfig

500 lines
15 KiB
Plaintext
Executable File

menu "Device Drivers"
config RT_USING_DEVICE_IPC
bool "Using device drivers IPC"
default y
if RT_USING_DEVICE_IPC
config RT_PIPE_BUFSZ
int "Set pipe buffer size"
default 512
endif
config RT_USING_SERIAL
bool "Using serial device drivers"
select RT_USING_DEVICE_IPC
select RT_USING_DEVICE
default y
if RT_USING_SERIAL
config RT_SERIAL_USING_DMA
bool "Enable serial DMA mode"
default y
config RT_SERIAL_RB_BUFSZ
int "Set RX buffer size"
default 64
endif
config RT_USING_CAN
bool "Using CAN device drivers"
default n
if RT_USING_CAN
config RT_CAN_USING_HDR
bool "Enable CAN hardware filter"
default y
endif
config RT_USING_HWTIMER
bool "Using hardware timer device drivers"
default n
config RT_USING_CPUTIME
bool "Enable CPU time for high resolution clock counter"
default n
help
When enable this option, the BSP should provide a rt_clock_cputime_ops
for CPU time by:
const static struct rt_clock_cputime_ops _ops = {...};
clock_cpu_setops(&_ops);
Then user can use high resolution clock counter with:
ts1 = clock_cpu_gettime();
ts2 = clock_cpu_gettime();
/* and get the ms of delta tick with API: */
ms_tick = clock_cpu_millisecond(t2 - t1);
us_tick = clock_cpu_microsecond(t2 - t1);
if RT_USING_CPUTIME
config RT_USING_CPUTIME_CORTEXM
bool "Use DWT for CPU time"
default y
depends on ARCH_ARM_CORTEX_M3 || ARCH_ARM_CORTEX_M4 || ARCH_ARM_CORTEX_M7
help
Some Cortex-M3/4/7 MCU has Data Watchpoint and Trace Register, use
the cycle counter in DWT for CPU time.
endif
config RT_USING_I2C
bool "Using I2C device drivers"
default n
if RT_USING_I2C
config RT_USING_I2C_BITOPS
bool "Use GPIO to simulate I2C"
default y
endif
config RT_USING_PIN
bool "Using generic GPIO device drivers"
default y
config RT_USING_ADC
bool "Using ADC device drivers"
default n
config RT_USING_PWM
bool "Using PWM device drivers"
default n
config RT_USING_MTD_NOR
bool "Using MTD Nor Flash device drivers"
default n
config RT_USING_MTD_NAND
bool "Using MTD Nand Flash device drivers"
default n
if RT_USING_MTD_NAND
config RT_MTD_NAND_DEBUG
bool "Enable MTD Nand operations debug information"
default n
endif
config RT_USING_MTD
bool "Using Memory Technology Device (MTD)"
default n
if RT_USING_MTD
config MTD_USING_NOR
bool "Using MTD Nor Flash device"
default n
config MTD_USING_NAND
bool "Using MTD Nand Flash device"
default n
endif
config RT_USING_PM
bool "Using Power Management device drivers"
default n
config RT_USING_RTC
bool "Using RTC device drivers"
select RT_USING_LIBC
default n
if RT_USING_RTC
config RT_USING_ALARM
bool "Using RTC alarm"
default n
config RT_USING_SOFT_RTC
bool "Using software simulation RTC device"
default n
config RTC_SYNC_USING_NTP
bool "Using NTP auto sync RTC time"
depends on PKG_NETUTILS_NTP
default y
if RTC_SYNC_USING_NTP
config RTC_NTP_FIRST_SYNC_DELAY
int "NTP first sync delay time(second) for network connect"
default 30
config RTC_NTP_SYNC_PERIOD
int "NTP auto sync period(second)"
default 3600
endif
endif
config RT_USING_SDIO
bool "Using SD/MMC device drivers"
default n
if RT_USING_SDIO
config RT_SDIO_STACK_SIZE
int "The stack size for sdio irq thread"
default 512
config RT_SDIO_THREAD_PRIORITY
int "The priority level value of sdio irq thread"
default 15
config RT_MMCSD_STACK_SIZE
int "The stack size for mmcsd thread"
default 1024
config RT_MMCSD_THREAD_PREORITY
int "The priority level value of mmcsd thread"
default 22
config RT_MMCSD_MAX_PARTITION
int "mmcsd max partition"
default 16
config RT_SDIO_DEBUG
bool "Enable SDIO debug log output"
default n
endif
config RT_USING_SPI
bool "Using SPI Bus/Device device drivers"
default n
if RT_USING_SPI
config RT_USING_QSPI
bool "Enable QSPI mode"
default n
config RT_USING_SPI_MSD
bool "Using SD/TF card driver with spi"
select RT_USING_DFS
default n
config RT_USING_SFUD
bool "Using Serial Flash Universal Driver"
default n
if RT_USING_SFUD
config RT_SFUD_USING_SFDP
bool "Using auto probe flash JEDEC SFDP parameter"
default y
config RT_SFUD_USING_FLASH_INFO_TABLE
bool "Using defined supported flash chip information table"
default y
config RT_SFUD_USING_QSPI
bool "Using QSPI mode support"
select RT_USING_QSPI
default n
config RT_DEBUG_SFUD
bool "Show more SFUD debug information"
default n
endif
config RT_USING_W25QXX
bool "Using W25QXX SPI NorFlash"
default n
config RT_USING_GD
bool "Using GD SPI NorFlash"
default n
config RT_USING_ENC28J60
bool "Using ENC28J60 SPI Ethernet network interface"
select RT_USING_LWIP
default n
config RT_USING_SPI_WIFI
bool "Using RW009/007 SPI Wi-Fi wireless interface"
select RT_USING_LWIP
default n
endif
config RT_USING_WDT
bool "Using Watch Dog device drivers"
default n
config RT_USING_AUDIO
bool "Using Audio device drivers"
default n
config RT_USING_SENSOR
bool "Using Sensor device drivers"
select RT_USING_PIN
default n
if RT_USING_SENSOR
config RT_USING_SENSOR_CMD
bool "Using Sensor cmd"
default y
endif
menu "Using WiFi"
config RT_USING_WIFI
bool "Using Wi-Fi framework"
default n
if RT_USING_WIFI
config RT_WLAN_DEVICE_STA_NAME
string "The WiFi device name for station"
default "wlan0"
config RT_WLAN_DEVICE_AP_NAME
string "The WiFi device name for ap"
default "wlan1"
config RT_WLAN_DEFAULT_PROT
string "Default transport protocol"
default "lwip"
config RT_WLAN_SCAN_WAIT_MS
int "Set scan timeout time(ms)"
default 10000
config RT_WLAN_CONNECT_WAIT_MS
int "Set connect timeout time(ms)"
default 10000
config RT_WLAN_SSID_MAX_LENGTH
int "SSID name maximum length"
default 32
config RT_WLAN_PASSWORD_MAX_LENGTH
int "Maximum password length"
default 32
config RT_WLAN_SCAN_SORT
bool "Automatic sorting of scan results"
default y
config RT_WLAN_CFG_INFO_MAX
int "Maximum number of WiFi information automatically saved"
default 3
config RT_WLAN_WORKQUEUE_THREAD_NAME
string "WiFi work queue thread name"
default "wlan_job"
config RT_WLAN_WORKQUEUE_THREAD_SIZE
int "wifi work queue thread size"
default 2048
config RT_WLAN_WORKQUEUE_THREAD_PRIO
int "WiFi work queue thread priority"
default 22
config RT_WLAN_DEV_EVENT_NUM
int "Maximum number of driver events"
default 2
config RT_WLAN_PROT_LWIP_PBUF_FORCE
bool "Forced use of PBUF transmission"
default n
menuconfig RT_WLAN_DEBUG
bool "Enable WLAN Debugging Options"
default n
if RT_WLAN_DEBUG
config RT_WLAN_CMD_DEBUG
bool "Enable Debugging of wlan_cmd.c"
default n
config RT_WLAN_MGNT_DEBUG
bool "Enable Debugging of wlan_mgnt.c"
default n
config RT_WLAN_DEV_DEBUG
bool "Enable Debugging of wlan_dev.c"
default n
config RT_WLAN_PROT_DEBUG
bool "Enable Debugging of wlan_prot.c"
default n
config RT_WLAN_CFG_DEBUG
bool "Enable Debugging of wlan_cfg.c"
default n
config RT_WLAN_LWIP_DEBUG
bool "Enable Debugging of wlan_lwip.c"
default n
endif
endif
endmenu
menu "Using USB"
config RT_USING_USB_HOST
bool "Using USB host"
default n
if RT_USING_USB_HOST
config RT_USBH_MSTORAGE
bool "Enable Udisk Drivers"
default n
if RT_USBH_MSTORAGE
config UDISK_MOUNTPOINT
string "Udisk mount dir"
default "/"
endif
endif
config RT_USING_USB_DEVICE
bool "Using USB device"
default n
if RT_USING_USB_DEVICE || RT_USING_USB_HOST
config RT_USBD_THREAD_STACK_SZ
int "usb thread stack size"
default 4096
endif
if RT_USING_USB_DEVICE
config USB_VENDOR_ID
hex "USB Vendor ID"
default 0x0FFE
config USB_PRODUCT_ID
hex "USB Product ID"
default 0x0001
config RT_USB_DEVICE_COMPOSITE
bool "Enable composite device"
default n
choice
prompt "Device type"
default _RT_USB_DEVICE_NONE
depends on !RT_USB_DEVICE_COMPOSITE
config _RT_USB_DEVICE_NONE
bool "Using custom class by register interface"
select RT_USB_DEVICE_NONE
config _RT_USB_DEVICE_CDC
bool "Enable to use device as CDC device"
select RT_USB_DEVICE_CDC
config _RT_USB_DEVICE_MSTORAGE
bool "Enable to use device as Mass Storage device"
select RT_USB_DEVICE_MSTORAGE
config _RT_USB_DEVICE_HID
bool "Enable to use device as HID device"
select RT_USB_DEVICE_HID
config _RT_USB_DEVICE_RNDIS
bool "Enable to use device as rndis device"
select RT_USB_DEVICE_RNDIS
depends on RT_USING_LWIP
config _RT_USB_DEVICE_ECM
bool "Enable to use device as ecm device"
select RT_USB_DEVICE_ECM
depends on RT_USING_LWIP
config _RT_USB_DEVICE_WINUSB
bool "Enable to use device as winusb device"
select RT_USB_DEVICE_WINUSB
endchoice
if RT_USB_DEVICE_COMPOSITE
config RT_USB_DEVICE_CDC
bool "Enable to use device as CDC device"
default n
config RT_USB_DEVICE_NONE
bool
default y
config RT_USB_DEVICE_MSTORAGE
bool "Enable to use device as Mass Storage device"
default n
config RT_USB_DEVICE_HID
bool "Enable to use device as HID device"
default n
config RT_USB_DEVICE_RNDIS
bool "Enable to use device as rndis device"
default n
depends on RT_USING_LWIP
config RT_USB_DEVICE_ECM
bool "Enable to use device as ecm device"
default n
depends on RT_USING_LWIP
config RT_USB_DEVICE_WINUSB
bool "Enable to use device as winusb device"
default n
endif
if RT_USB_DEVICE_CDC
config RT_VCOM_TASK_STK_SIZE
int "virtual com thread stack size"
default 512
config RT_VCOM_TX_USE_DMA
bool "Enable to use dma for vcom tx"
default n
config RT_VCOM_SERNO
string "serial number of virtual com"
default "32021919830108"
config RT_VCOM_SER_LEN
int "serial number length of virtual com"
default 14
config RT_VCOM_TX_TIMEOUT
int "tx timeout(ticks) of virtual com"
default 1000
endif
if RT_USB_DEVICE_WINUSB
config RT_WINUSB_GUID
string "Guid for winusb"
default "{6860DC3C-C05F-4807-8807-1CA861CC1D66}"
endif
if RT_USB_DEVICE_MSTORAGE
config RT_USB_MSTORAGE_DISK_NAME
string "msc class disk name"
default "flash0"
endif
if RT_USB_DEVICE_HID
config RT_USB_DEVICE_HID_KEYBOARD
bool "Use to HID device as Keyboard"
default n
if RT_USB_DEVICE_HID_KEYBOARD
config RT_USB_DEVICE_HID_KEYBOARD_NUMBER
int "Number of Keyboard(max 3)"
default 1
range 1 3
endif
config RT_USB_DEVICE_HID_MOUSE
bool "Use to HID device as Mouse"
default n
config RT_USB_DEVICE_HID_GENERAL
bool "Use to HID device as General HID device"
default y
if RT_USB_DEVICE_HID_GENERAL
config RT_USB_DEVICE_HID_GENERAL_OUT_REPORT_LENGTH
int "General HID device out report length"
default 63
range 0 63
config RT_USB_DEVICE_HID_GENERAL_IN_REPORT_LENGTH
int "General HID device in report length"
default 63
range 0 63
endif
config RT_USB_DEVICE_HID_MEDIA
bool "Use to HID device as media keyboard"
default y
endif
endif
endmenu
endmenu