rt-thread-official/bsp/ls1cdev/drivers/drv_spi.c

322 lines
8.3 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* File : drv_spi.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2012, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2017-11-02 勤为本 first version
* 2018-06-09 zhuangwei add spi0 cs0 support,remove msd_init
*/
#include <rtthread.h>
#include <drivers/spi.h>
#include <rthw.h>
#include "drv_spi.h"
#include "ls1c_public.h"
#include "spi_msd.h"
#include "dfs_fs.h"
#include "../libraries/ls1c_pin.h"
#ifdef RT_USING_SPI
#ifdef DEBUG
#define DEBUG_PRINTF(...) rt_kprintf(__VA_ARGS__)
#else
#define DEBUG_PRINTF(...)
#endif
static rt_err_t configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration);
static rt_uint32_t xfer(struct rt_spi_device *device, struct rt_spi_message *message);
static struct rt_spi_ops ls1c_spi_ops =
{
.configure = configure,
.xfer = xfer
};
static rt_err_t configure(struct rt_spi_device *device,
struct rt_spi_configuration *configuration)
{
struct rt_spi_bus *spi_bus = NULL;
struct ls1c_spi *ls1c_spi = NULL;
unsigned char SPIx = 0;
void *spi_base = NULL;
unsigned char cpol = 0;
unsigned char cpha = 0;
unsigned char val = 0;
RT_ASSERT(NULL != device);
RT_ASSERT(NULL != configuration);
spi_bus = device->bus;
ls1c_spi = (struct ls1c_spi *)spi_bus->parent.user_data;
SPIx = ls1c_spi->SPIx;
spi_base = ls1c_spi_get_base(SPIx);
{
// 使能SPI控制器master模式关闭中断
reg_write_8(0x53, spi_base + LS1C_SPI_SPCR_OFFSET);
// 清空状态寄存器
reg_write_8(0xc0, spi_base + LS1C_SPI_SPSR_OFFSET);
// 1字节产生中断采样(读)与发送(写)时机同时
reg_write_8(0x03, spi_base + LS1C_SPI_SPER_OFFSET);
// 关闭SPI flash
val = reg_read_8(spi_base + LS1C_SPI_SFC_PARAM_OFFSET);
val &= 0xfe;
reg_write_8(val, spi_base + LS1C_SPI_SFC_PARAM_OFFSET);
// spi flash时序控制寄存器
reg_write_8(0x05, spi_base + LS1C_SPI_SFC_TIMING_OFFSET);
}
// baudrate
ls1c_spi_set_clock(spi_base, configuration->max_hz);
// 设置通信模式(时钟极性和相位)
if (configuration->mode & RT_SPI_CPOL) // cpol
{
cpol = SPI_CPOL_1;
}
else
{
cpol = SPI_CPOL_0;
}
if (configuration->mode & RT_SPI_CPHA) // cpha
{
cpha = SPI_CPHA_1;
}
else
{
cpha = SPI_CPHA_0;
}
ls1c_spi_set_mode(spi_base, cpol, cpha);
DEBUG_PRINTF("ls1c spi%d configuration\n", SPIx);
return RT_EOK;
}
static rt_uint32_t xfer(struct rt_spi_device *device,
struct rt_spi_message *message)
{
struct rt_spi_bus *spi_bus = NULL;
struct ls1c_spi *ls1c_spi = NULL;
void *spi_base = NULL;
unsigned char SPIx = 0;
struct ls1c_spi_cs *ls1c_spi_cs = NULL;
unsigned char cs = 0;
rt_uint32_t size = 0;
const rt_uint8_t *send_ptr = NULL;
rt_uint8_t *recv_ptr = NULL;
rt_uint8_t data = 0;
RT_ASSERT(NULL != device);
RT_ASSERT(NULL != message);
spi_bus = device->bus;
ls1c_spi = spi_bus->parent.user_data;
SPIx = ls1c_spi->SPIx;
spi_base = ls1c_spi_get_base(SPIx);
ls1c_spi_cs = device->parent.user_data;
cs = ls1c_spi_cs->cs;
size = message->length;
DEBUG_PRINTF("[%s] SPIx=%d, cs=%d\n", __FUNCTION__, SPIx, cs);
// take cs
if (message->cs_take)
{
ls1c_spi_set_cs(spi_base, cs, 0);
}
// 收发数据
send_ptr = message->send_buf;
recv_ptr = message->recv_buf;
while (size--)
{
data = 0xFF;
if (NULL != send_ptr)
{
data = *send_ptr++;
}
if (NULL != recv_ptr)
{
*recv_ptr++ = ls1c_spi_txrx_byte(spi_base, data);
}
else
{
ls1c_spi_txrx_byte(spi_base, data);
}
}
// release cs
if (message->cs_release)
{
ls1c_spi_set_cs(spi_base, cs, 1);
}
return message->length;
}
#ifdef RT_USING_SPI0
struct ls1c_spi ls1c_spi0 =
{
.SPIx = LS1C_SPI_0,
};
static struct rt_spi_bus spi0_bus;
#endif
#ifdef RT_USING_SPI1
struct ls1c_spi ls1c_spi1 =
{
.SPIx = LS1C_SPI_1,
};
static struct rt_spi_bus spi1_bus;
#endif
/*
* 初始化并注册龙芯1c的spi总线
* @SPI SPI总线比如LS1C_SPI_0 LS1C_SPI_1
* @spi_bus_name 总线名字
* @ret
*/
rt_err_t ls1c_spi_bus_register(rt_uint8_t SPI, const char *spi_bus_name)
{
struct rt_spi_bus *spi_bus = NULL;
#ifdef RT_USING_SPI0
if (LS1C_SPI_0 == SPI)
{
spi_bus = &spi0_bus;
spi_bus->parent.user_data = &ls1c_spi0;
}
#endif
#ifdef RT_USING_SPI1
if (LS1C_SPI_1 == SPI)
{
spi_bus = &spi1_bus;
spi_bus->parent.user_data = &ls1c_spi1;
}
#endif
return rt_spi_bus_register(spi_bus, spi_bus_name, &ls1c_spi_ops);
}
int ls1c_hw_spi_init(void)
{
#ifdef RT_USING_SPI0
pin_set_purpose(78, PIN_PURPOSE_OTHER);
pin_set_purpose(79, PIN_PURPOSE_OTHER);
pin_set_purpose(80, PIN_PURPOSE_OTHER);
pin_set_purpose(83, PIN_PURPOSE_OTHER);//cs2 - SD card
pin_set_purpose(82, PIN_PURPOSE_OTHER);//cs1
pin_set_purpose(81, PIN_PURPOSE_OTHER);//cs0
pin_set_remap(78, PIN_REMAP_DEFAULT);
pin_set_remap(79, PIN_REMAP_DEFAULT);
pin_set_remap(80, PIN_REMAP_DEFAULT);
pin_set_remap(83, PIN_REMAP_DEFAULT);//cs2 - SD card
pin_set_remap(82, PIN_REMAP_DEFAULT);//CS1
pin_set_remap(81, PIN_REMAP_DEFAULT);//cs0
ls1c_spi_bus_register(LS1C_SPI_0, "spi0");
#endif
#ifdef RT_USING_SPI1
pin_set_purpose(46, PIN_PURPOSE_OTHER);
pin_set_purpose(47, PIN_PURPOSE_OTHER);
pin_set_purpose(48, PIN_PURPOSE_OTHER);
pin_set_purpose(49, PIN_PURPOSE_OTHER);//CS0 - touch screen
pin_set_remap(46, PIN_REMAP_THIRD);
pin_set_remap(47, PIN_REMAP_THIRD);
pin_set_remap(48, PIN_REMAP_THIRD);
pin_set_remap(49, PIN_REMAP_THIRD);//CS0 - touch screen
ls1c_spi_bus_register(LS1C_SPI_1, "spi1");
#endif
#ifdef RT_USING_SPI0
/* attach cs */
{
static struct rt_spi_device spi_device0;
static struct rt_spi_device spi_device1;
static struct rt_spi_device spi_device2;
static struct rt_spi_device spi_device3;
static struct ls1c_spi_cs spi_cs0;
static struct ls1c_spi_cs spi_cs1;
static struct ls1c_spi_cs spi_cs2;
static struct ls1c_spi_cs spi_cs3;
/* spi02: CS2 SD Card*/
spi_cs2.cs = LS1C_SPI_CS_2;
rt_spi_bus_attach_device(&spi_device2, "spi02", "spi0", (void *)&spi_cs2);
spi_cs1.cs = LS1C_SPI_CS_1;
rt_spi_bus_attach_device(&spi_device1, "spi01", "spi0", (void *)&spi_cs1);
spi_cs0.cs = LS1C_SPI_CS_0;
rt_spi_bus_attach_device(&spi_device0, "spi00", "spi0", (void *)&spi_cs0);
spi_cs3.cs = LS1C_SPI_CS_3;
rt_spi_bus_attach_device(&spi_device3, "spi03", "spi0", (void*)&spi_cs3);
msd_init("sd0", "spi02");
}
#endif
#ifdef RT_USING_SPI1
{
static struct rt_spi_device spi_device;
static struct ls1c_spi_cs spi_cs;
/* spi10: CS0 Touch*/
spi_cs.cs = LS1C_SPI_CS_0;
rt_spi_bus_attach_device(&spi_device, "spi10", "spi1", (void *)&spi_cs);
}
#endif
}
INIT_BOARD_EXPORT(ls1c_hw_spi_init);
static int board_sd_init(void)
{
#if defined(RT_USING_DFS) && defined(RT_USING_DFS_ELMFAT)
/* mount sd card fat partition 1 as root directory */
if( dfs_mount("sd0", "/", "elm", 0, 0) == 0)
{
rt_kprintf("File System initialized!\n");
}
else
{
rt_kprintf("File System initialzation failed!\n");
}
#endif /* RT_USING_DFS && RT_USING_DFS_ELMFAT */
}
INIT_APP_EXPORT(board_sd_init);
#endif