rt-thread-official/bsp/rm48x50/HALCoGen/include/reg_gio.h

100 lines
2.7 KiB
C

/** @file reg_gio.h
* @brief GIO Register Layer Header File
* @date 29.May.2013
* @version 03.05.02
*
* This file contains:
* - Definitions
* - Types
* - Interface Prototypes
* .
* which are relevant for the GIO driver.
*/
/* (c) Texas Instruments 2009-2013, All rights reserved. */
#ifndef __REG_GIO_H__
#define __REG_GIO_H__
#include "sys_common.h"
/* USER CODE BEGIN (0) */
/* USER CODE END */
/* Gio Register Frame Definition */
/** @struct gioBase
* @brief GIO Base Register Definition
*
* This structure is used to access the GIO module registers.
*/
/** @typedef gioBASE_t
* @brief GIO Register Frame Type Definition
*
* This type is used to access the GIO Registers.
*/
typedef volatile struct gioBase
{
uint32 GCR0; /**< 0x0000: Global Control Register */
uint32 PWDN; /**< 0x0004: Power Down Register */
uint32 INTDET; /**< 0x0008: Interrupt Detect Register*/
uint32 POL; /**< 0x000C: Interrupt Polarity Register */
uint32 INTENASET; /**< 0x0010: Interrupt Enable Set Register */
uint32 INTENACLR; /**< 0x0014: Interrupt Enable Clear Register */
uint32 LVLSET; /**< 0x0018: Interrupt Priority Set Register */
uint32 LVLCLR; /**< 0x001C: Interrupt Priority Clear Register */
uint32 FLG; /**< 0x0020: Interrupt Flag Register */
uint32 OFFSET0; /**< 0x0024: Interrupt Offset A Register */
uint32 OFFSET1; /**< 0x0028: Interrupt Offset B Register */
} gioBASE_t;
/** @struct gioPort
* @brief GIO Port Register Definition
*/
/** @typedef gioPORT_t
* @brief GIO Port Register Type Definition
*
* This type is used to access the GIO Port Registers.
*/
typedef volatile struct gioPort
{
uint32 DIR; /**< 0x0000: Data Direction Register */
uint32 DIN; /**< 0x0004: Data Input Register */
uint32 DOUT; /**< 0x0008: Data Output Register */
uint32 DSET; /**< 0x000C: Data Output Set Register */
uint32 DCLR; /**< 0x0010: Data Output Clear Register */
uint32 PDR; /**< 0x0014: Open Drain Register */
uint32 PULDIS; /**< 0x0018: Pullup Disable Register */
uint32 PSL; /**< 0x001C: Pull Up/Down Selection Register */
} gioPORT_t;
/** @def gioREG
* @brief GIO Register Frame Pointer
*
* This pointer is used by the GIO driver to access the gio module registers.
*/
#define gioREG ((gioBASE_t *)0xFFF7BC00U)
/** @def gioPORTA
* @brief GIO Port (A) Register Pointer
*
* Pointer used by the GIO driver to access PORTA
*/
#define gioPORTA ((gioPORT_t *)0xFFF7BC34U)
/** @def gioPORTB
* @brief GIO Port (B) Register Pointer
*
* Pointer used by the GIO driver to access PORTB
*/
#define gioPORTB ((gioPORT_t *)0xFFF7BC54U)
/* USER CODE BEGIN (1) */
/* USER CODE END */
#endif