libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/imxrt/libraries/MIMXRT1170/MIMXRT1176/drivers/fsl_pxp.c

2191 lines
84 KiB
C
Raw Blame History

/*
* Copyright 2017-2022 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_pxp.h"
#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET
#include "fsl_memory.h"
#endif
/*******************************************************************************
* Definitions
******************************************************************************/
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.pxp"
#endif
/* The CSC2 coefficient is ###.####_#### */
#define PXP_CSC2_COEF_INT_WIDTH 2
#define PXP_CSC2_COEF_FRAC_WIDTH 8
/* Compatibility map macro. */
#if defined(PXP_PS_CLRKEYLOW_0_PIXEL_MASK) && (!defined(PXP_PS_CLRKEYLOW_PIXEL_MASK))
#define PS_CLRKEYLOW PS_CLRKEYLOW_0
#define PS_CLRKEYHIGH PS_CLRKEYHIGH_0
#endif
#if defined(PXP_AS_CLRKEYLOW_0_PIXEL_MASK) && (!defined(PXP_AS_CLRKEYLOW_PIXEL_MASK))
#define AS_CLRKEYLOW AS_CLRKEYLOW_0
#define AS_CLRKEYHIGH AS_CLRKEYHIGH_0
#endif
#define PXP_MAX_HEIGHT ((PXP_OUT_LRC_Y_MASK >> PXP_OUT_LRC_Y_SHIFT) + 1U)
/* Compatibility macro remap. */
#if (!defined(PXP_PORTER_DUFF_CTRL_PORTER_DUFF_ENABLE_MASK) && defined(PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK))
#define PXP_PORTER_DUFF_CTRL_PORTER_DUFF_ENABLE_MASK PXP_PORTER_DUFF_CTRL_POTER_DUFF_ENABLE_MASK
#endif
#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET
#define PXP_ADDR_CPU_2_IP(addr) (MEMORY_ConvertMemoryMapAddress((uint32_t)(addr), kMEMORY_Local2DMA))
#else
#define PXP_ADDR_CPU_2_IP(addr) (addr)
#endif /* FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET */
#if !(defined(FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL) && FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL)
#define S1_COLOR_MODE PXP_PORTER_DUFF_CTRL_S1_COLOR_MODE
#define S1_ALPHA_MODE PXP_PORTER_DUFF_CTRL_S1_ALPHA_MODE
#define S1_GLOBAL_ALPHA_MODE PXP_PORTER_DUFF_CTRL_S1_GLOBAL_ALPHA_MODE
#define S1_S0_FACTOR_MODE PXP_PORTER_DUFF_CTRL_S1_S0_FACTOR_MODE
#define S0_COLOR_MODE PXP_PORTER_DUFF_CTRL_S0_COLOR_MODE
#define S0_ALPHA_MODE PXP_PORTER_DUFF_CTRL_S0_ALPHA_MODE
#define S0_GLOBAL_ALPHA_MODE PXP_PORTER_DUFF_CTRL_S0_GLOBAL_ALPHA_MODE
#define S0_S1_FACTOR_MODE PXP_PORTER_DUFF_CTRL_S0_S1_FACTOR_MODE
#define PORTER_DUFF_ENABLE_MASK PXP_PORTER_DUFF_CTRL_PORTER_DUFF_ENABLE_MASK
#endif /* FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL */
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
#define S1_COLOR_MODE PXP_ALPHA_A_CTRL_S1_COLOR_MODE
#define S1_ALPHA_MODE PXP_ALPHA_A_CTRL_S1_ALPHA_MODE
#define S1_GLOBAL_ALPHA_MODE PXP_ALPHA_A_CTRL_S1_GLOBAL_ALPHA_MODE
#define S1_S0_FACTOR_MODE PXP_ALPHA_A_CTRL_S1_S0_FACTOR_MODE
#define S0_COLOR_MODE PXP_ALPHA_A_CTRL_S0_COLOR_MODE
#define S0_ALPHA_MODE PXP_ALPHA_A_CTRL_S0_ALPHA_MODE
#define S0_GLOBAL_ALPHA_MODE PXP_ALPHA_A_CTRL_S0_GLOBAL_ALPHA_MODE
#define S0_S1_FACTOR_MODE PXP_ALPHA_A_CTRL_S0_S1_FACTOR_MODE
#define PORTER_DUFF_ENABLE_MASK PXP_ALPHA_A_CTRL_PORTER_DUFF_ENABLE_MASK
#endif /* FSL_FEATURE_PXP_V3 */
typedef union _u32_f32
{
float f32;
uint32_t u32;
} u32_f32_t;
typedef union _pxp_pvoid_u32
{
void *pvoid;
uint32_t u32;
} pxp_pvoid_u32_t;
/*******************************************************************************
* Prototypes
******************************************************************************/
/*!
* @brief Get the instance from the base address
*
* @param base PXP peripheral base address
*
* @return The PXP module instance
*/
static uint32_t PXP_GetInstance(PXP_Type *base);
#if !(defined(FSL_FEATURE_PXP_HAS_NO_CSC2) && FSL_FEATURE_PXP_HAS_NO_CSC2)
/*!
* @brief Convert IEEE 754 float value to the value could be written to registers.
*
* This function converts the float value to integer value to set the scaler
* and CSC parameters.
*
* This function is an alternative implemention of the following code with no
* MISRA 2004 rule 10.4 error:
*
* @code
return (uint32_t)(floatValue * (float)(1 << fracBits));
@endcode
*
* @param floatValue The float value to convert.
* @param intBits Bits number of integer part in result.
* @param fracBits Bits number of fractional part in result.
* @return The value to set to register.
*/
static uint32_t PXP_ConvertFloat(float floatValue, uint8_t intBits, uint8_t fracBits);
#endif
/*!
* @brief Convert the desired scale fact to DEC and PS_SCALE.
*
* @param inputDimension Input dimension.
* @param outputDimension Output dimension.
* @param dec The decimation filter contr0l value.
* @param scale The scale value set to register PS_SCALE.
*/
static void PXP_GetScalerParam(uint16_t inputDimension, uint16_t outputDimension, uint8_t *dec, uint32_t *scale);
/*!
* @brief Reset the PXP to initialized state.
*
* @param base PXP peripheral base address.
*/
static void PXP_ResetToInit(PXP_Type *base);
/*!
* @brief Copy rectangle.
*
* @param base PXP peripheral base address.
* @param srcAddr Start address of the soruce rectangle.
* @param srcPitchBytes Pitch of source buffer.
* @param destAddr Start address of the destination rectangle.
* @param destPitchBytes Pitch of destination buffer.
* @param width How many pixels one line to copy.
* @param height How many lines to copy.
* @param pixelFormat Pixel format.
*/
static void PXP_StartRectCopy(PXP_Type *base,
uint32_t srcAddr,
uint16_t srcPitchBytes,
uint32_t destAddr,
uint16_t destPitchBytes,
uint16_t width,
uint16_t height,
pxp_as_pixel_format_t pixelFormat);
/*******************************************************************************
* Variables
******************************************************************************/
/*! @brief Pointers to PXP bases for each instance. */
static PXP_Type *const s_pxpBases[] = PXP_BASE_PTRS;
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/*! @brief Pointers to PXP clocks for each PXP submodule. */
static const clock_ip_name_t s_pxpClocks[] = PXP_CLOCKS;
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
/*******************************************************************************
* Code
******************************************************************************/
static uint32_t PXP_GetInstance(PXP_Type *base)
{
uint32_t instance;
/* Find the instance index from base address mappings. */
for (instance = 0; instance < ARRAY_SIZE(s_pxpBases); instance++)
{
if (s_pxpBases[instance] == base)
{
break;
}
}
assert(instance < ARRAY_SIZE(s_pxpBases));
return instance;
}
#if !(defined(FSL_FEATURE_PXP_HAS_NO_CSC2) && FSL_FEATURE_PXP_HAS_NO_CSC2)
static uint32_t PXP_ConvertFloat(float floatValue, uint8_t intBits, uint8_t fracBits)
{
/* One bit reserved for sign bit. */
assert(intBits + fracBits < 32U);
u32_f32_t u32_f32;
uint32_t ret;
u32_f32.f32 = floatValue;
uint32_t floatBits = u32_f32.u32;
int32_t expValue = (int32_t)((uint16_t)((floatBits & 0x7F800000UL) >> 23U)) - 127;
ret = (floatBits & 0x007FFFFFU) | 0x00800000U;
expValue += (int32_t)fracBits;
if (expValue < 0)
{
return 0U;
}
else if (expValue > 23)
{
/* should not exceed 31-bit when left shift. */
assert((expValue - 23) <= 7);
ret <<= ((uint16_t)expValue - 23U);
}
else
{
ret >>= (23U - (uint16_t)expValue);
}
/* Set the sign bit. */
if ((floatBits & 0x80000000UL) != 0U)
{
ret = ((~ret) + 1UL) & ~(((uint32_t)-1) << ((uint32_t)intBits + (uint32_t)fracBits + 1UL));
}
return ret;
}
#endif
static void PXP_GetScalerParam(uint16_t inputDimension, uint16_t outputDimension, uint8_t *dec, uint32_t *scale)
{
uint32_t scaleFact = ((uint32_t)inputDimension << 12U) / outputDimension;
if (scaleFact >= (16UL << 12U))
{
/* Desired fact is two large, use the largest support value. */
*dec = 3U;
*scale = 0x2000U;
}
else
{
if (scaleFact > (8UL << 12U))
{
*dec = 3U;
}
else if (scaleFact > (4UL << 12U))
{
*dec = 2U;
}
else if (scaleFact > (2UL << 12U))
{
*dec = 1U;
}
else
{
*dec = 0U;
}
*scale = scaleFact >> (*dec);
if (0U == *scale)
{
*scale = 1U;
}
}
}
static void PXP_ResetToInit(PXP_Type *base)
{
uint32_t ctrl = 0U;
PXP_Reset(base);
/* Enable the process engine in primary processing flow. */
#if defined(PXP_CTRL_ENABLE_ROTATE0_MASK)
ctrl |= PXP_CTRL_ENABLE_ROTATE0_MASK;
#endif
#if defined(PXP_CTRL_ENABLE_ROTATE1_MASK)
ctrl |= PXP_CTRL_ENABLE_ROTATE1_MASK;
#endif
#if defined(PXP_CTRL_ENABLE_CSC2_MASK)
ctrl |= PXP_CTRL_ENABLE_CSC2_MASK;
#endif
#if defined(PXP_CTRL_ENABLE_LUT_MASK)
ctrl |= PXP_CTRL_ENABLE_LUT_MASK;
#endif
#if defined(PXP_CTRL_ENABLE_PS_AS_OUT_MASK)
ctrl |= PXP_CTRL_ENABLE_PS_AS_OUT_MASK;
#endif
base->CTRL = ctrl;
}
/*!
* brief Initialize the PXP.
*
* This function enables the PXP peripheral clock, and resets the PXP registers
* to default status.
*
* param base PXP peripheral base address.
*/
void PXP_Init(PXP_Type *base)
{
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
uint32_t instance = PXP_GetInstance(base);
CLOCK_EnableClock(s_pxpClocks[instance]);
#endif
PXP_ResetToInit(base);
/* Disable the alpha surface. */
PXP_SetAlphaSurfacePosition(base, 0xFFFFU, 0xFFFFU, 0U, 0U);
}
/*!
* brief De-initialize the PXP.
*
* This function disables the PXP peripheral clock.
*
* param base PXP peripheral base address.
*/
void PXP_Deinit(PXP_Type *base)
{
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
uint32_t instance = PXP_GetInstance(base);
CLOCK_DisableClock(s_pxpClocks[instance]);
#endif
}
/*!
* brief Reset the PXP.
*
* This function resets the PXP peripheral registers to default status.
*
* param base PXP peripheral base address.
*/
void PXP_Reset(PXP_Type *base)
{
base->CTRL_SET = PXP_CTRL_SFTRST_MASK;
base->CTRL_CLR = (PXP_CTRL_SFTRST_MASK | PXP_CTRL_CLKGATE_MASK);
}
/*!
* brief Set the alpha surface input buffer configuration.
*
* param base PXP peripheral base address.
* param config Pointer to the configuration.
*/
void PXP_SetAlphaSurfaceBufferConfig(PXP_Type *base, const pxp_as_buffer_config_t *config)
{
assert(NULL != config);
base->AS_CTRL = (base->AS_CTRL & ~PXP_AS_CTRL_FORMAT_MASK) | PXP_AS_CTRL_FORMAT(config->pixelFormat);
base->AS_BUF = PXP_ADDR_CPU_2_IP(config->bufferAddr);
base->AS_PITCH = config->pitchBytes;
}
/*!
* brief Set the alpha surface blending configuration.
*
* param base PXP peripheral base address.
* param config Pointer to the configuration structure.
*/
void PXP_SetAlphaSurfaceBlendConfig(PXP_Type *base, const pxp_as_blend_config_t *config)
{
assert(NULL != config);
uint32_t reg;
reg = base->AS_CTRL;
reg &=
~(PXP_AS_CTRL_ALPHA0_INVERT_MASK | PXP_AS_CTRL_ROP_MASK | PXP_AS_CTRL_ALPHA_MASK | PXP_AS_CTRL_ALPHA_CTRL_MASK);
reg |= (PXP_AS_CTRL_ROP(config->ropMode) | PXP_AS_CTRL_ALPHA(config->alpha) |
PXP_AS_CTRL_ALPHA_CTRL(config->alphaMode));
if (config->invertAlpha)
{
reg |= PXP_AS_CTRL_ALPHA0_INVERT_MASK;
}
base->AS_CTRL = reg;
}
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
/*!
* brief Set the alpha surface blending configuration for the secondary engine.
*
* param base PXP peripheral base address.
* param config Pointer to the configuration structure.
*/
void PXP_SetAlphaSurfaceBlendSecondaryConfig(PXP_Type *base, const pxp_as_blend_secondary_config_t *config)
{
assert(NULL != config);
base->ALPHA_B_CTRL_1 =
(base->ALPHA_B_CTRL_1 & ~(PXP_ALPHA_B_CTRL_1_ROP_MASK | PXP_ALPHA_B_CTRL_1_ROP_ENABLE_MASK)) |
PXP_ALPHA_B_CTRL_1_ROP((uint32_t)config->ropMode) | PXP_ALPHA_B_CTRL_1_ROP_ENABLE((uint32_t)config->ropEnable);
if (config->invertAlpha)
{
base->AS_CTRL |= PXP_AS_CTRL_ALPHA1_INVERT_MASK;
}
else
{
base->AS_CTRL &= ~PXP_AS_CTRL_ALPHA1_INVERT_MASK;
}
}
#endif /* FSL_FEATURE_PXP_V3 */
/*!
* brief Set the alpha surface position in output buffer.
*
* param base PXP peripheral base address.
* param upperLeftX X of the upper left corner.
* param upperLeftY Y of the upper left corner.
* param lowerRightX X of the lower right corner.
* param lowerRightY Y of the lower right corner.
*/
void PXP_SetAlphaSurfacePosition(
PXP_Type *base, uint16_t upperLeftX, uint16_t upperLeftY, uint16_t lowerRightX, uint16_t lowerRightY)
{
base->OUT_AS_ULC = PXP_OUT_AS_ULC_Y(upperLeftY) | PXP_OUT_AS_ULC_X(upperLeftX);
base->OUT_AS_LRC = PXP_OUT_AS_LRC_Y(lowerRightY) | PXP_OUT_AS_LRC_X(lowerRightX);
}
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
/*!
* brief Set the alpha surface overlay color key.
*
* If a pixel in the current overlay image with a color that falls in the range
* from the p colorKeyLow to p colorKeyHigh range, it will use the process surface
* pixel value for that location. If no PS image is present or if the PS image also
* matches its colorkey range, the PS background color is used.
*
* param base PXP peripheral base address.
* param num instance number. 0 for alpha engine A, 1 for alpha engine B.
* param colorKeyLow Color key low range.
* param colorKeyHigh Color key high range.
*
* note Colorkey operations are higher priority than alpha or ROP operations
*/
void PXP_SetAlphaSurfaceOverlayColorKey(PXP_Type *base, uint8_t num, uint32_t colorKeyLow, uint32_t colorKeyHigh)
{
switch (num)
{
case 0:
base->AS_CLRKEYLOW = colorKeyLow;
base->AS_CLRKEYHIGH = colorKeyHigh;
break;
case 1:
base->AS_CLRKEYLOW_1 = colorKeyLow;
base->AS_CLRKEYHIGH_1 = colorKeyHigh;
break;
default:
/* Only 2 alpha process engine instances are supported. */
assert(false);
break;
}
}
#else
/*!
* brief Set the alpha surface overlay color key.
*
* If a pixel in the current overlay image with a color that falls in the range
* from the p colorKeyLow to p colorKeyHigh range, it will use the process surface
* pixel value for that location. If no PS image is present or if the PS image also
* matches its colorkey range, the PS background color is used.
*
* param base PXP peripheral base address.
* param colorKeyLow Color key low range.
* param colorKeyHigh Color key high range.
*
* note Colorkey operations are higher priority than alpha or ROP operations
*/
void PXP_SetAlphaSurfaceOverlayColorKey(PXP_Type *base, uint32_t colorKeyLow, uint32_t colorKeyHigh)
{
base->AS_CLRKEYLOW = colorKeyLow;
base->AS_CLRKEYHIGH = colorKeyHigh;
}
#endif /* FSL_FEATURE_PXP_V3 */
/*!
* brief Set the process surface input buffer configuration.
*
* param base PXP peripheral base address.
* param config Pointer to the configuration.
*/
void PXP_SetProcessSurfaceBufferConfig(PXP_Type *base, const pxp_ps_buffer_config_t *config)
{
assert(NULL != config);
base->PS_CTRL = ((base->PS_CTRL & ~(PXP_PS_CTRL_FORMAT_MASK | PXP_PS_CTRL_WB_SWAP_MASK)) |
PXP_PS_CTRL_FORMAT(config->pixelFormat) | PXP_PS_CTRL_WB_SWAP(config->swapByte));
base->PS_BUF = PXP_ADDR_CPU_2_IP(config->bufferAddr);
base->PS_UBUF = PXP_ADDR_CPU_2_IP(config->bufferAddrU);
base->PS_VBUF = PXP_ADDR_CPU_2_IP(config->bufferAddrV);
base->PS_PITCH = config->pitchBytes;
}
/*!
* brief Set the process surface scaler configuration.
*
* The valid down scale fact is 1/(2^12) ~ 16.
*
* param base PXP peripheral base address.
* param inputWidth Input image width.
* param inputHeight Input image height.
* param outputWidth Output image width.
* param outputHeight Output image height.
*/
void PXP_SetProcessSurfaceScaler(
PXP_Type *base, uint16_t inputWidth, uint16_t inputHeight, uint16_t outputWidth, uint16_t outputHeight)
{
uint8_t decX, decY;
uint32_t scaleX, scaleY;
PXP_GetScalerParam(inputWidth, outputWidth, &decX, &scaleX);
PXP_GetScalerParam(inputHeight, outputHeight, &decY, &scaleY);
base->PS_CTRL = (base->PS_CTRL & ~(PXP_PS_CTRL_DECX_MASK | PXP_PS_CTRL_DECY_MASK)) | PXP_PS_CTRL_DECX(decX) |
PXP_PS_CTRL_DECY(decY);
base->PS_SCALE = PXP_PS_SCALE_XSCALE(scaleX) | PXP_PS_SCALE_YSCALE(scaleY);
}
/*!
* brief Set the process surface position in output buffer.
*
* param base PXP peripheral base address.
* param upperLeftX X of the upper left corner.
* param upperLeftY Y of the upper left corner.
* param lowerRightX X of the lower right corner.
* param lowerRightY Y of the lower right corner.
*/
void PXP_SetProcessSurfacePosition(
PXP_Type *base, uint16_t upperLeftX, uint16_t upperLeftY, uint16_t lowerRightX, uint16_t lowerRightY)
{
base->OUT_PS_ULC = PXP_OUT_PS_ULC_Y(upperLeftY) | PXP_OUT_PS_ULC_X(upperLeftX);
base->OUT_PS_LRC = PXP_OUT_PS_LRC_Y(lowerRightY) | PXP_OUT_PS_LRC_X(lowerRightX);
}
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
/*!
* brief Set the process surface color key.
*
* If the PS image matches colorkey range, the PS background color is output. Set
* p colorKeyLow to 0xFFFFFFFF and p colorKeyHigh to 0 will disable the colorkeying.
*
* param base PXP peripheral base address.
* param num instance number. 0 for alpha engine A, 1 for alpha engine B.
* param colorKeyLow Color key low range.
* param colorKeyHigh Color key high range.
*/
void PXP_SetProcessSurfaceColorKey(PXP_Type *base, uint8_t num, uint32_t colorKeyLow, uint32_t colorKeyHigh)
{
switch (num)
{
case 0:
base->PS_CLRKEYLOW = colorKeyLow;
base->PS_CLRKEYHIGH = colorKeyHigh;
break;
case 1:
base->PS_CLRKEYLOW_1 = colorKeyLow;
base->PS_CLRKEYHIGH_1 = colorKeyHigh;
break;
default:
/* Only 2 alpha process engine instances are supported. */
assert(false);
break;
}
}
#else
/*!
* brief Set the process surface color key.
*
* If the PS image matches colorkey range, the PS background color is output. Set
* p colorKeyLow to 0xFFFFFFFF and p colorKeyHigh to 0 will disable the colorkeying.
*
* param base PXP peripheral base address.
* param colorKeyLow Color key low range.
* param colorKeyHigh Color key high range.
*/
void PXP_SetProcessSurfaceColorKey(PXP_Type *base, uint32_t colorKeyLow, uint32_t colorKeyHigh)
{
base->PS_CLRKEYLOW = colorKeyLow;
base->PS_CLRKEYHIGH = colorKeyHigh;
}
#endif /* FSL_FEATURE_PXP_V3 */
/*!
* brief Set the PXP outpt buffer configuration.
*
* param base PXP peripheral base address.
* param config Pointer to the configuration.
*/
void PXP_SetOutputBufferConfig(PXP_Type *base, const pxp_output_buffer_config_t *config)
{
assert(NULL != config);
base->OUT_CTRL = (base->OUT_CTRL & ~(PXP_OUT_CTRL_FORMAT_MASK | PXP_OUT_CTRL_INTERLACED_OUTPUT_MASK)) |
PXP_OUT_CTRL_FORMAT(config->pixelFormat) | PXP_OUT_CTRL_INTERLACED_OUTPUT(config->interlacedMode);
base->OUT_BUF = PXP_ADDR_CPU_2_IP(config->buffer0Addr);
base->OUT_BUF2 = PXP_ADDR_CPU_2_IP(config->buffer1Addr);
base->OUT_PITCH = config->pitchBytes;
base->OUT_LRC = PXP_OUT_LRC_Y((uint32_t)config->height - 1U) | PXP_OUT_LRC_X((uint32_t)config->width - 1U);
/*
* The dither store size must be set to the same with the output buffer size,
* otherwise the dither engine could not work.
*/
#if defined(PXP_DITHER_STORE_SIZE_CH0_OUT_WIDTH_MASK)
base->DITHER_STORE_SIZE_CH0 = PXP_DITHER_STORE_SIZE_CH0_OUT_WIDTH((uint32_t)config->width - 1U) |
PXP_DITHER_STORE_SIZE_CH0_OUT_HEIGHT((uint32_t)config->height - 1U);
#endif
}
/*!
* brief Build a solid rectangle of given pixel value.
*
* param base PXP peripheral base address.
* param outFormat output pixel format.
* param value The value of the pixel to be filled in the rectangle in ARGB8888 format.
* param width width of the rectangle.
* param height height of the rectangle.
* param pitch output pitch in byte.
* param outAddr address of the memory to store the rectangle.
*/
void PXP_BuildRect(PXP_Type *base,
pxp_output_pixel_format_t outFormat,
uint32_t value,
uint16_t width,
uint16_t height,
uint16_t pitch,
uint32_t outAddr)
{
/* Only support RGB format output. */
assert((uint8_t)outFormat <= (uint8_t)kPXP_OutputPixelFormatRGB565);
/* PS configuration */
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
PXP_SetProcessSurfaceBackGroundColor(base, 0U, value);
#else
PXP_SetProcessSurfaceBackGroundColor(base, value);
#endif
PXP_SetProcessSurfacePosition(base, 0xFFFF, 0xFFFF, 0, 0);
if ((outFormat == kPXP_OutputPixelFormatARGB8888) || (outFormat == kPXP_OutputPixelFormatARGB1555) ||
(outFormat == kPXP_OutputPixelFormatARGB4444))
{
uint8_t alpha = (uint8_t)(value >> 24U);
pxp_as_buffer_config_t asBufferConfig = {
.pixelFormat = kPXP_AsPixelFormatARGB8888,
.bufferAddr = outAddr,
.pitchBytes = pitch,
};
PXP_SetAlphaSurfaceBufferConfig(base, &asBufferConfig);
pxp_as_blend_config_t asBlendConfig = {
.alpha = alpha, .invertAlpha = false, .alphaMode = kPXP_AlphaOverride, .ropMode = kPXP_RopMergeAs};
PXP_SetAlphaSurfaceBlendConfig(base, &asBlendConfig);
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
PXP_SetAlphaSurfaceOverlayColorKey(base, 0U, 0U, 0xFFFFFFFFUL);
PXP_EnableAlphaSurfaceOverlayColorKey(base, 0U, true);
#else
PXP_SetAlphaSurfaceOverlayColorKey(base, 0U, 0xFFFFFFFFUL);
PXP_EnableAlphaSurfaceOverlayColorKey(base, true);
#endif
PXP_SetAlphaSurfacePosition(base, 0, 0, width, height);
}
else
{
/* No need to configure AS for formats that do not have alpha value. */
PXP_SetAlphaSurfacePosition(base, 0xFFFFU, 0xFFFFU, 0, 0);
}
/* Output config. */
pxp_output_buffer_config_t outputBufferConfig;
outputBufferConfig.pixelFormat = outFormat;
outputBufferConfig.interlacedMode = kPXP_OutputProgressive;
outputBufferConfig.buffer0Addr = outAddr;
outputBufferConfig.buffer1Addr = 0U;
outputBufferConfig.pitchBytes = pitch;
outputBufferConfig.width = width;
outputBufferConfig.height = height;
PXP_SetOutputBufferConfig(base, &outputBufferConfig);
PXP_EnableCsc1(base, false);
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
PXP_SetPath(PXP, kPXP_Mux3SelectCsc1Engine);
PXP_SetPath(PXP, kPXP_Mux8SelectAlphaBlending0);
PXP_SetPath(PXP, kPXP_Mux11SelectMux8);
PXP_SetPath(PXP, kPXP_Mux14SelectMux11);
PXP_SetPath(PXP, kPXP_Mux0SelectNone);
PXP_SetPath(PXP, kPXP_Mux6SelectNone);
PXP_SetPath(PXP, kPXP_Mux9SelectNone);
PXP_SetPath(PXP, kPXP_Mux12SelectNone);
#endif
PXP_ClearStatusFlags(base, (uint32_t)kPXP_CompleteFlag);
/* Start PXP. */
PXP_Start(base);
/* Wait for process complete. */
while (0UL == ((uint32_t)kPXP_CompleteFlag & PXP_GetStatusFlags(base)))
{
}
}
/*!
* brief Set the next command.
*
* The PXP supports a primitive ability to queue up one operation while the current
* operation is running. Workflow:
*
* 1. Prepare the PXP register values except STAT, CSCCOEFn, NEXT in the memory
* in the order they appear in the register map.
* 2. Call this function sets the new operation to PXP.
* 3. There are two methods to check whether the PXP has loaded the new operation.
* The first method is using ref PXP_IsNextCommandPending. If there is new operation
* not loaded by the PXP, this function returns true. The second method is checking
* the flag ref kPXP_CommandLoadFlag, if command loaded, this flag asserts. User
* could enable interrupt ref kPXP_CommandLoadInterruptEnable to get the loaded
* signal in interrupt way.
* 4. When command loaded by PXP, a new command could be set using this function.
*
* param base PXP peripheral base address.
* param commandAddr Address of the new command.
*/
void PXP_SetNextCommand(PXP_Type *base, void *commandAddr)
{
pxp_pvoid_u32_t addr;
/* Make sure commands have been saved to memory. */
__DSB();
addr.pvoid = commandAddr;
base->NEXT = PXP_ADDR_CPU_2_IP(addr.u32) & PXP_NEXT_POINTER_MASK;
}
#if !(defined(FSL_FEATURE_PXP_HAS_NO_CSC2) && FSL_FEATURE_PXP_HAS_NO_CSC2)
/*!
* brief Set the CSC2 configuration.
*
* The CSC2 module receives pixels in any color space and can convert the pixels
* into any of RGB, YUV, or YCbCr color spaces. The output pixels are passed
* onto the LUT and rotation engine for further processing
*
* param base PXP peripheral base address.
* param config Pointer to the configuration.
*/
void PXP_SetCsc2Config(PXP_Type *base, const pxp_csc2_config_t *config)
{
assert(NULL != config);
uint32_t tempReg;
base->CSC2_CTRL = (base->CSC2_CTRL & ~PXP_CSC2_CTRL_CSC_MODE_MASK) | PXP_CSC2_CTRL_CSC_MODE(config->mode);
tempReg =
(PXP_ConvertFloat(config->A1, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF0_A1_SHIFT);
base->CSC2_COEF0 = tempReg | (PXP_ConvertFloat(config->A2, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH)
<< PXP_CSC2_COEF0_A2_SHIFT);
tempReg =
(PXP_ConvertFloat(config->A3, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF1_A3_SHIFT);
base->CSC2_COEF1 = tempReg | (PXP_ConvertFloat(config->B1, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH)
<< PXP_CSC2_COEF1_B1_SHIFT);
tempReg =
(PXP_ConvertFloat(config->B2, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF2_B2_SHIFT);
base->CSC2_COEF2 = tempReg | (PXP_ConvertFloat(config->B3, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH)
<< PXP_CSC2_COEF2_B3_SHIFT);
tempReg =
(PXP_ConvertFloat(config->C1, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF3_C1_SHIFT);
base->CSC2_COEF3 = tempReg | (PXP_ConvertFloat(config->C2, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH)
<< PXP_CSC2_COEF3_C2_SHIFT);
tempReg =
(PXP_ConvertFloat(config->C3, PXP_CSC2_COEF_INT_WIDTH, PXP_CSC2_COEF_FRAC_WIDTH) << PXP_CSC2_COEF4_C3_SHIFT);
base->CSC2_COEF4 = tempReg | PXP_CSC2_COEF4_D1(config->D1);
base->CSC2_COEF5 = PXP_CSC2_COEF5_D2(config->D2) | PXP_CSC2_COEF5_D3(config->D3);
}
#endif
/*!
* brief Set the CSC1 mode.
*
* The CSC1 module receives scaled YUV/YCbCr444 pixels from the scale engine and
* converts the pixels to the RGB888 color space. It could only be used by process
* surface.
*
* param base PXP peripheral base address.
* param mode The conversion mode.
*/
void PXP_SetCsc1Mode(PXP_Type *base, pxp_csc1_mode_t mode)
{
/*
* The equations used for Colorspace conversion are:
*
* R = C0*(Y+Y_OFFSET) + C1(V+UV_OFFSET)
* G = C0*(Y+Y_OFFSET) + C3(U+UV_OFFSET) + C2(V+UV_OFFSET)
* B = C0*(Y+Y_OFFSET) + C4(U+UV_OFFSET)
*/
if (kPXP_Csc1YUV2RGB == mode)
{
base->CSC1_COEF0 = (base->CSC1_COEF0 & ~(PXP_CSC1_COEF0_C0_MASK | PXP_CSC1_COEF0_Y_OFFSET_MASK |
PXP_CSC1_COEF0_UV_OFFSET_MASK | PXP_CSC1_COEF0_YCBCR_MODE_MASK)) |
PXP_CSC1_COEF0_C0(0x100U) /* 1.00. */
| PXP_CSC1_COEF0_Y_OFFSET(0x0U) /* 0. */
| PXP_CSC1_COEF0_UV_OFFSET(0x0U); /* 0. */
base->CSC1_COEF1 = PXP_CSC1_COEF1_C1(0x0123U) /* 1.140. */
| PXP_CSC1_COEF1_C4(0x0208U); /* 2.032. */
base->CSC1_COEF2 = PXP_CSC1_COEF2_C2(0x076BU) /* -0.851. */
| PXP_CSC1_COEF2_C3(0x079BU); /* -0.394. */
}
else
{
base->CSC1_COEF0 = (base->CSC1_COEF0 &
~(PXP_CSC1_COEF0_C0_MASK | PXP_CSC1_COEF0_Y_OFFSET_MASK | PXP_CSC1_COEF0_UV_OFFSET_MASK)) |
PXP_CSC1_COEF0_YCBCR_MODE_MASK | PXP_CSC1_COEF0_C0(0x12AU) /* 1.164. */
| PXP_CSC1_COEF0_Y_OFFSET(0x1F0U) /* -16. */
| PXP_CSC1_COEF0_UV_OFFSET(0x180U); /* -128. */
base->CSC1_COEF1 = PXP_CSC1_COEF1_C1(0x0198U) /* 1.596. */
| PXP_CSC1_COEF1_C4(0x0204U); /* 2.017. */
base->CSC1_COEF2 = PXP_CSC1_COEF2_C2(0x0730U) /* -0.813. */
| PXP_CSC1_COEF2_C3(0x079CU); /* -0.392. */
}
}
#if !(defined(FSL_FEATURE_PXP_HAS_NO_LUT) && FSL_FEATURE_PXP_HAS_NO_LUT)
/*!
* brief Set the LUT configuration.
*
* The lookup table (LUT) is used to modify pixels in a manner that is not linear
* and that cannot be achieved by the color space conversion modules. To setup
* the LUT, the complete workflow is:
* 1. Use ref PXP_SetLutConfig to set the configuration, such as the lookup mode.
* 2. Use ref PXP_LoadLutTable to load the lookup table to PXP.
* 3. Use ref PXP_EnableLut to enable the function.
*
* param base PXP peripheral base address.
* param config Pointer to the configuration.
*/
void PXP_SetLutConfig(PXP_Type *base, const pxp_lut_config_t *config)
{
base->LUT_CTRL = (base->LUT_CTRL & ~(PXP_LUT_CTRL_OUT_MODE_MASK | PXP_LUT_CTRL_LOOKUP_MODE_MASK)) |
PXP_LUT_CTRL_LRU_UPD_MASK | /* Use Least Recently Used Policy Update Control. */
PXP_LUT_CTRL_OUT_MODE(config->outMode) | PXP_LUT_CTRL_LOOKUP_MODE(config->lookupMode);
if (kPXP_LutOutRGBW4444CFA == config->outMode)
{
base->CFA = config->cfaValue;
}
}
/*!
* brief Set the look up table to PXP.
*
* If lookup mode is DIRECT mode, this function loads p bytesNum of values
* from the address p memAddr into PXP LUT address p lutStartAddr. So this
* function allows only update part of the PXP LUT.
*
* If lookup mode is CACHE mode, this function sets the new address to p memAddr
* and invalid the PXP LUT cache.
*
* param base PXP peripheral base address.
* param lookupMode Which lookup mode is used. Note that this parameter is only
* used to distinguish DIRECT mode and CACHE mode, it does not change the register
* value PXP_LUT_CTRL[LOOKUP_MODE]. To change that value, use function ref PXP_SetLutConfig.
* param bytesNum How many bytes to set. This value must be divisable by 8.
* param memAddr Address of look up table to set.
* param lutStartAddr The LUT value will be loaded to LUT from index lutAddr. It should
* be 8 bytes aligned.
*
* retval kStatus_Success Load successfully.
* retval kStatus_InvalidArgument Failed because of invalid argument.
*/
status_t PXP_LoadLutTable(
PXP_Type *base, pxp_lut_lookup_mode_t lookupMode, uint32_t bytesNum, uint32_t memAddr, uint16_t lutStartAddr)
{
memAddr = PXP_ADDR_CPU_2_IP(memAddr);
if (kPXP_LutCacheRGB565 == lookupMode)
{
/* Make sure the previous memory write is finished, especially the LUT data memory. */
__DSB();
base->LUT_EXTMEM = memAddr;
/* Invalid cache. */
base->LUT_CTRL |= PXP_LUT_CTRL_INVALID_MASK;
}
else
{
/* Number of bytes must be divisable by 8. */
if (((bytesNum & 0x07U) != 0U) || (bytesNum < 8U) || ((lutStartAddr & 0x07U) != 0U) ||
(bytesNum + (uint32_t)lutStartAddr > PXP_LUT_TABLE_BYTE))
{
return kStatus_InvalidArgument;
}
base->LUT_EXTMEM = memAddr;
base->LUT_ADDR = PXP_LUT_ADDR_ADDR(lutStartAddr) | PXP_LUT_ADDR_NUM_BYTES(bytesNum);
base->STAT_CLR = PXP_STAT_LUT_DMA_LOAD_DONE_IRQ_MASK;
/* Start DMA transfer. */
base->LUT_CTRL |= PXP_LUT_CTRL_DMA_START_MASK;
__DSB();
/* Wait for transfer completed. */
while (0U == (base->STAT & PXP_STAT_LUT_DMA_LOAD_DONE_IRQ_MASK))
{
}
}
return kStatus_Success;
}
#endif /* FSL_FEATURE_PXP_HAS_NO_LUT */
#if (defined(FSL_FEATURE_PXP_HAS_DITHER) && FSL_FEATURE_PXP_HAS_DITHER)
/*!
* brief Write data to the PXP internal memory.
*
* param base PXP peripheral base address.
* param ram Which internal memory to write.
* param bytesNum How many bytes to write.
* param data Pointer to the data to write.
* param memStartAddr The start address in the internal memory to write the data.
*/
void PXP_SetInternalRamData(PXP_Type *base, pxp_ram_t ram, uint32_t bytesNum, uint8_t *data, uint16_t memStartAddr)
{
assert(((uint32_t)memStartAddr + bytesNum) <= (uint32_t)PXP_INTERNAL_RAM_LUT_BYTE);
base->INIT_MEM_CTRL =
PXP_INIT_MEM_CTRL_ADDR(memStartAddr) | PXP_INIT_MEM_CTRL_SELECT(ram) | PXP_INIT_MEM_CTRL_START_MASK;
while (0U != bytesNum--)
{
base->INIT_MEM_DATA = (uint32_t)(*data);
data++;
}
base->INIT_MEM_CTRL = 0U;
}
/*!
* brief Set the dither final LUT data.
*
* The dither final LUT is only applicble to dither engine 0. It takes the bits[7:4]
* of the output pixel and looks up and 8 bit value from the 16 value LUT to generate
* the final output pixel to the next process module.
*
* param base PXP peripheral base address.
* param data Pointer to the LUT data to set.
*/
void PXP_SetDitherFinalLutData(PXP_Type *base, const pxp_dither_final_lut_data_t *data)
{
base->DITHER_FINAL_LUT_DATA0 = data->data_3_0;
base->DITHER_FINAL_LUT_DATA1 = data->data_7_4;
base->DITHER_FINAL_LUT_DATA2 = data->data_11_8;
base->DITHER_FINAL_LUT_DATA3 = data->data_15_12;
}
/*!
* brief Enable or disable dither engine in the PXP process path.
*
* After the initialize function ref PXP_Init, the dither engine is disabled and not
* use in the PXP processing path. This function enables the dither engine and
* routes the dither engine output to the output buffer. When the dither engine
* is enabled using this function, ref PXP_SetDitherConfig must be called to
* configure dither engine correctly, otherwise there is not output to the output
* buffer.
*
* param base PXP peripheral base address.
* param enable Pass in true to enable, false to disable.
*/
void PXP_EnableDither(PXP_Type *base, bool enable)
{
if (enable)
{
base->CTRL_SET = PXP_CTRL_ENABLE_DITHER_MASK;
}
else
{
base->CTRL_CLR = PXP_CTRL_ENABLE_DITHER_MASK;
}
}
#endif /* FSL_FEATURE_PXP_HAS_DITHER */
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
/*!
* brief Set the Porter Duff configuration for one of the alpha process engine.
*
* param base PXP peripheral base address.
* param num instance number.
* param config Pointer to the configuration.
*/
void PXP_SetPorterDuffConfig(PXP_Type *base, uint8_t num, const pxp_porter_duff_config_t *config)
{
assert(NULL != config);
union
{
pxp_porter_duff_config_t pdConfigStruct;
uint32_t u32;
} pdConfig;
pdConfig.pdConfigStruct = *config;
switch (num)
{
case 0:
base->ALPHA_A_CTRL = pdConfig.u32;
break;
case 1:
base->ALPHA_B_CTRL = pdConfig.u32;
break;
default:
/* Only 2 alpha process engine instances are supported. */
assert(false);
break;
}
}
#endif /* FSL_FEATURE_PXP_V3 */
#if !(defined(FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL) && FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL)
/*!
* brief Set the Porter Duff configuration.
*
* param base PXP peripheral base address.
* param config Pointer to the configuration.
*/
void PXP_SetPorterDuffConfig(PXP_Type *base, const pxp_porter_duff_config_t *config)
{
assert(NULL != config);
union
{
pxp_porter_duff_config_t pdConfigStruct;
uint32_t u32;
} pdConfig;
pdConfig.pdConfigStruct = *config;
base->PORTER_DUFF_CTRL = pdConfig.u32;
}
#endif /* FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL */
#if (!(defined(FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL) && FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL)) || \
(defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3)
/*!
* brief Get the Porter Duff configuration by blend mode.
*
* param mode The blend mode.
* param config Pointer to the configuration.
* retval kStatus_Success Successfully get the configuratoin.
* retval kStatus_InvalidArgument The blend mode not supported.
*/
status_t PXP_GetPorterDuffConfig(pxp_porter_duff_blend_mode_t mode, pxp_porter_duff_config_t *config)
{
status_t status;
union
{
pxp_porter_duff_config_t pdConfigStruct;
uint32_t u32;
} pdConfig;
static const uint32_t pdCtrl[] = {
/* kPXP_PorterDuffSrc */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorOne) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorZero),
/* kPXP_PorterDuffAtop */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorStraight) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorInversed),
/* kPXP_PorterDuffOver */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorOne) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorInversed),
/* kPXP_PorterDuffIn */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorStraight) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorZero),
/* kPXP_PorterDuffOut */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorInversed) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorZero),
/* kPXP_PorterDuffDst */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorZero) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorOne),
/* kPXP_PorterDuffDstAtop */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorInversed) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorStraight),
/* kPXP_PorterDuffDstOver */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorInversed) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorOne),
/* kPXP_PorterDuffDstIn */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorZero) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorStraight),
/* kPXP_PorterDuffDstOut */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorZero) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorInversed),
/* kPXP_PorterDuffXor */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorInversed) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorInversed),
/* kPXP_PorterDuffClear */
PORTER_DUFF_ENABLE_MASK | S0_S1_FACTOR_MODE(kPXP_PorterDuffFactorZero) |
S1_S0_FACTOR_MODE(kPXP_PorterDuffFactorZero),
};
if (mode >= kPXP_PorterDuffMax)
{
status = kStatus_InvalidArgument;
}
else
{
pdConfig.u32 = pdCtrl[(uint32_t)mode] | S0_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) |
S1_GLOBAL_ALPHA_MODE(kPXP_PorterDuffLocalAlpha) | S0_COLOR_MODE(kPXP_PorterDuffColorWithAlpha) |
S1_COLOR_MODE(kPXP_PorterDuffColorWithAlpha) | S0_ALPHA_MODE(kPXP_PorterDuffAlphaStraight) |
S1_ALPHA_MODE(kPXP_PorterDuffAlphaStraight);
*config = pdConfig.pdConfigStruct;
status = kStatus_Success;
}
return status;
}
#endif /* FSL_FEATURE_PXP_V3 || FSL_FEATURE_PXP_HAS_NO_PORTER_DUFF_CTRL */
static void PXP_StartRectCopy(PXP_Type *base,
uint32_t srcAddr,
uint16_t srcPitchBytes,
uint32_t destAddr,
uint16_t destPitchBytes,
uint16_t width,
uint16_t height,
pxp_as_pixel_format_t pixelFormat)
{
pxp_output_buffer_config_t outputBufferConfig;
pxp_as_buffer_config_t asBufferConfig;
uint32_t intMask;
#if !(defined(FSL_FEATURE_PXP_HAS_NO_LUT) && FSL_FEATURE_PXP_HAS_NO_LUT)
intMask =
base->CTRL & (PXP_CTRL_NEXT_IRQ_ENABLE_MASK | PXP_CTRL_IRQ_ENABLE_MASK | PXP_CTRL_LUT_DMA_IRQ_ENABLE_MASK);
#else
intMask = base->CTRL & (PXP_CTRL_NEXT_IRQ_ENABLE_MASK | PXP_CTRL_IRQ_ENABLE_MASK);
#endif
PXP_ResetToInit(base);
/* Restore previous interrupt configuration. */
PXP_EnableInterrupts(base, intMask);
/* Disable PS */
PXP_SetProcessSurfacePosition(base, 0xFFFFU, 0xFFFFU, 0U, 0U);
/* Input buffer. */
asBufferConfig.pixelFormat = pixelFormat;
asBufferConfig.bufferAddr = srcAddr;
asBufferConfig.pitchBytes = srcPitchBytes;
PXP_SetAlphaSurfaceBufferConfig(base, &asBufferConfig);
PXP_SetAlphaSurfacePosition(base, 0U, 0U, width - 1U, height - 1U);
/* Alpha mode set to ROP, AS OR PS */
const pxp_as_blend_config_t asBlendConfig = {
.alpha = 0U, .invertAlpha = false, .alphaMode = kPXP_AlphaRop, .ropMode = kPXP_RopMergeAs};
PXP_SetAlphaSurfaceBlendConfig(base, &asBlendConfig);
/* Output buffer. */
outputBufferConfig.pixelFormat = (pxp_output_pixel_format_t)pixelFormat;
outputBufferConfig.interlacedMode = kPXP_OutputProgressive;
outputBufferConfig.buffer0Addr = destAddr;
outputBufferConfig.buffer1Addr = 0U;
outputBufferConfig.pitchBytes = destPitchBytes;
outputBufferConfig.width = width;
outputBufferConfig.height = height;
PXP_SetOutputBufferConfig(base, &outputBufferConfig);
PXP_ClearStatusFlags(base, (uint32_t)kPXP_CompleteFlag);
PXP_Start(base);
}
/*!
* brief Copy picture from one buffer to another buffer.
*
* This function copies a rectangle from one buffer to another buffer.
*
* param base PXP peripheral base address.
* retval kStatus_Success Successfully started the copy process.
* retval kStatus_InvalidArgument Invalid argument.
*/
status_t PXP_StartPictureCopy(PXP_Type *base, const pxp_pic_copy_config_t *config)
{
uint8_t bytePerPixel;
uint32_t copyFromAddr;
uint32_t copyToAddr;
if ((0U == config->height) || (0U == config->width))
{
return kStatus_InvalidArgument;
}
if ((config->pixelFormat == kPXP_AsPixelFormatARGB8888) || (config->pixelFormat == kPXP_AsPixelFormatRGB888))
{
bytePerPixel = 4U;
}
else
{
bytePerPixel = 2U;
}
copyFromAddr = config->srcPicBaseAddr + ((uint32_t)config->srcOffsetY * (uint32_t)config->srcPitchBytes) +
bytePerPixel * config->srcOffsetX;
copyToAddr = config->destPicBaseAddr + ((uint32_t)config->destOffsetY * (uint32_t)config->destPitchBytes) +
bytePerPixel * config->destOffsetX;
PXP_StartRectCopy(base, copyFromAddr, config->srcPitchBytes, copyToAddr, config->destPitchBytes, config->width,
config->height, config->pixelFormat);
return kStatus_Success;
}
/*!
* brief Copy continous memory.
*
* The copy size should be 512 byte aligned.
*
* param base PXP peripheral base address.
* retval kStatus_Success Successfully started the copy process.
* retval kStatus_InvalidArgument Invalid argument.
*/
status_t PXP_StartMemCopy(PXP_Type *base, uint32_t srcAddr, uint32_t destAddr, uint32_t size)
{
uint16_t pitchBytes;
uint32_t height;
if ((0U == size) || ((size % 512U) != 0U))
{
return kStatus_InvalidArgument;
}
/*
* By default, PXP process block is 8x8. For better performance, choose
* width and height dividable by block size.
*/
if (size < 8U * 512U)
{
height = 8U;
pitchBytes = (uint16_t)(size / height);
}
else
{
pitchBytes = 512U;
height = size / pitchBytes;
}
if (height > PXP_MAX_HEIGHT)
{
return kStatus_InvalidArgument;
}
PXP_StartRectCopy(base, srcAddr, pitchBytes, destAddr, pitchBytes, pitchBytes / 4U, (uint16_t)height,
kPXP_AsPixelFormatARGB8888);
return kStatus_Success;
}
/*!
* brief Copy continous memory.
*
* param base PXP peripheral base address.
* retval kStatus_Success Successfully started the copy process.
* retval kStatus_InvalidArgument Invalid argument.
*/
status_t PXP_MemCopy(PXP_Type *base, uint32_t srcAddr, uint32_t destAddr, uint32_t size)
{
uint16_t pitchBytes;
uint32_t height;
uint32_t unalignedSize;
if (0U == size)
{
return kStatus_InvalidArgument;
}
/* For 512 not aligned part, copy by CPU. */
unalignedSize = size % 512U;
if (0UL != unalignedSize)
{
(void)memcpy((uint8_t *)destAddr, (uint8_t *)srcAddr, unalignedSize);
destAddr += unalignedSize;
srcAddr += unalignedSize;
size -= unalignedSize;
}
if (0UL != size)
{
/*
* By default, PXP process block is 8x8. For better performance, choose
* width and height dividable by block size.
*/
if (size < 8U * 512U)
{
height = 8U;
pitchBytes = (uint16_t)(size / height);
}
else
{
pitchBytes = 512U;
height = size / pitchBytes;
}
if (height > PXP_MAX_HEIGHT)
{
return kStatus_InvalidArgument;
}
PXP_StartRectCopy(base, srcAddr, pitchBytes, destAddr, pitchBytes, pitchBytes / 4U, (uint16_t)height,
kPXP_AsPixelFormatARGB8888);
while (0UL == ((uint32_t)kPXP_CompleteFlag & PXP_GetStatusFlags(base)))
{
}
PXP_ClearStatusFlags(base, (uint32_t)kPXP_CompleteFlag);
}
return kStatus_Success;
}
#if defined(FSL_FEATURE_PXP_V3) && FSL_FEATURE_PXP_V3
/*!
* brief Configures one channle of some block's fetch engine.
*
* Fetch engine is 64-bit input and 32-bit output per channel
*
* param base PXP peripheral base address.
* param name which block the fetch engine belongs to.
* param channel channel number.
* param config pointer to the configuration structure.
* retval kStatus_Success Successfully configured the engine.
* retval kStatus_InvalidArgument Invalid argument.
*/
status_t PXP_SetFetchEngineConfig(PXP_Type *base,
pxp_fetch_engine_name_t name,
uint8_t channel,
const pxp_fetch_engine_config_t *config)
{
assert(NULL != config);
/* Check fetch address */
if ((config->inputBaseAddr0 == 0U) ||
((config->inputBaseAddr1 == 0U) && (config->pixelFormat == kPXP_FetchFormatYUV422_2P)))
{
return kStatus_InvalidArgument;
}
/* Must enable expand when input pixel format is YUV422_2P, to combine Y and UV buffer to one output. */
if ((config->expandEnable == false) && (config->pixelFormat == kPXP_FetchFormatYUV422_2P))
{
return kStatus_InvalidArgument;
}
/* Must enable block if flip or rotation is enabled. */
if ((config->fetchFormat.enableblock == false) &&
((config->flipMode != kPXP_FlipDisable) || (config->rotateDegree != kPXP_Rotate0)))
{
return kStatus_InvalidArgument;
}
/* Block mode cannot work in 64-bit mode */
if ((config->fetchFormat.enableblock == true) && (config->activeBits == kPXP_Active64Bits))
{
return kStatus_InvalidArgument;
}
uint32_t ctrlReg = 0U;
uint32_t ulcReg = 0U;
uint32_t lrcReg = 0U;
uint32_t fetchSizeReg = 0U;
uint32_t shiftCtrlReg = 0U;
uint32_t shiftOffsetReg = 0U;
uint32_t shiftWidthReg = 0U;
uint8_t scanlineNum = 0U;
/* When block disabled, handshake scanline mode can only use 1 line mode where scanlineNum = 0. */
if (config->fetchFormat.enableblock)
{
/* */
if (config->fetchFormat.blockSize16)
{
scanlineNum = 2;
}
else
{
scanlineNum = 1;
}
}
ctrlReg = PXP_INPUT_FETCH_CTRL_CH0_HANDSHAKE_SCAN_LINE_NUM((uint32_t)scanlineNum) |
PXP_INPUT_FETCH_CTRL_CH0_RD_NUM_BYTES(config->fetchFormat.burstLength) |
PXP_INPUT_FETCH_CTRL_CH0_ROTATION_ANGLE((uint32_t)config->rotateDegree) |
((uint32_t)config->flipMode << PXP_INPUT_FETCH_CTRL_CH0_HFLIP_SHIFT) |
PXP_INPUT_FETCH_CTRL_CH0_HIGH_BYTE((uint32_t)config->wordOrder) |
((uint32_t)config->interface << PXP_INPUT_FETCH_CTRL_CH0_HANDSHAKE_EN_SHIFT) |
PXP_INPUT_FETCH_CTRL_CH0_BLOCK_EN((uint32_t)config->fetchFormat.enableblock) |
PXP_INPUT_FETCH_CTRL_CH0_BLOCK_16((uint32_t)config->fetchFormat.blockSize16) |
PXP_INPUT_FETCH_CTRL_CH0_CH_EN((uint32_t)config->channelEnable);
ulcReg = (((uint32_t)config->ulcY) << 16U) | (uint32_t)config->ulcX;
lrcReg = (((uint32_t)config->lrcY) << 16U) | (uint32_t)config->lrcX;
fetchSizeReg = (((uint32_t)config->totalHeight) << 16U) | ((uint32_t)config->totalWidth);
shiftCtrlReg = PXP_INPUT_FETCH_SHIFT_CTRL_CH0_INPUT_ACTIVE_BPP((uint32_t)config->activeBits) |
PXP_INPUT_FETCH_SHIFT_CTRL_CH0_EXPAND_FORMAT((uint32_t)config->pixelFormat) |
PXP_INPUT_FETCH_SHIFT_CTRL_CH0_EXPAND_EN((uint32_t)config->expandEnable) |
PXP_INPUT_FETCH_SHIFT_CTRL_CH0_SHIFT_BYPASS((uint32_t)config->shiftConfig.shiftBypass);
if (!config->shiftConfig.shiftBypass)
{
shiftOffsetReg = (uint32_t)config->shiftConfig.component0.offset |
((uint32_t)(config->shiftConfig.component1.offset) << 8U) |
((uint32_t)(config->shiftConfig.component2.offset) << 16U) |
((uint32_t)(config->shiftConfig.component3.offset) << 24U);
shiftWidthReg = (uint32_t)config->shiftConfig.component0.width |
((uint32_t)(config->shiftConfig.component1.width) << 4U) |
((uint32_t)(config->shiftConfig.component2.width) << 8U) |
((uint32_t)(config->shiftConfig.component3.width) << 12U);
}
if (name == kPXP_FetchInput)
{
switch (channel)
{
case 0:
base->INPUT_FETCH_CTRL_CH0 = ctrlReg;
base->INPUT_FETCH_ACTIVE_SIZE_ULC_CH0 = ulcReg;
base->INPUT_FETCH_ACTIVE_SIZE_LRC_CH0 = lrcReg;
base->INPUT_FETCH_SIZE_CH0 = fetchSizeReg;
base->INPUT_FETCH_PITCH = (base->INPUT_FETCH_PITCH & PXP_INPUT_FETCH_PITCH_CH1_INPUT_PITCH_MASK) |
(uint32_t)config->pitchBytes;
base->INPUT_FETCH_SHIFT_CTRL_CH0 = shiftCtrlReg;
base->INPUT_FETCH_ADDR_0_CH0 = config->inputBaseAddr0;
base->INPUT_FETCH_ADDR_1_CH0 = config->inputBaseAddr1;
if (!config->shiftConfig.shiftBypass)
{
base->INPUT_FETCH_SHIFT_OFFSET_CH0 = shiftOffsetReg;
base->INPUT_FETCH_SHIFT_WIDTH_CH0 = shiftWidthReg;
}
break;
case 1:
base->INPUT_FETCH_CTRL_CH1 = ctrlReg;
base->INPUT_FETCH_ACTIVE_SIZE_ULC_CH1 = ulcReg;
base->INPUT_FETCH_ACTIVE_SIZE_LRC_CH1 = lrcReg;
base->INPUT_FETCH_SIZE_CH1 = fetchSizeReg;
base->INPUT_FETCH_PITCH = (base->INPUT_FETCH_PITCH & PXP_INPUT_FETCH_PITCH_CH0_INPUT_PITCH_MASK) |
((uint32_t)config->pitchBytes << 16U);
base->INPUT_FETCH_SHIFT_CTRL_CH1 = shiftCtrlReg;
base->INPUT_FETCH_ADDR_0_CH1 = config->inputBaseAddr0;
base->INPUT_FETCH_ADDR_1_CH1 = config->inputBaseAddr1;
if (!config->shiftConfig.shiftBypass)
{
base->INPUT_FETCH_SHIFT_OFFSET_CH1 = shiftOffsetReg;
base->INPUT_FETCH_SHIFT_WIDTH_CH1 = shiftWidthReg;
}
break;
default:
/* Only 2 channels are supported per fetch engine. */
assert(false);
break;
}
}
else
{
switch (channel)
{
case 0:
base->DITHER_FETCH_CTRL_CH0 = ctrlReg;
base->DITHER_FETCH_ACTIVE_SIZE_ULC_CH0 = ulcReg;
base->DITHER_FETCH_ACTIVE_SIZE_LRC_CH0 = lrcReg;
base->DITHER_FETCH_SIZE_CH0 = fetchSizeReg;
base->DITHER_FETCH_PITCH = (base->INPUT_FETCH_PITCH & PXP_INPUT_FETCH_PITCH_CH1_INPUT_PITCH_MASK) |
(uint32_t)config->pitchBytes;
base->DITHER_FETCH_SHIFT_CTRL_CH0 = shiftCtrlReg;
base->DITHER_FETCH_ADDR_0_CH0 = config->inputBaseAddr0;
base->DITHER_FETCH_ADDR_1_CH0 = config->inputBaseAddr1;
if (!config->shiftConfig.shiftBypass)
{
base->DITHER_FETCH_SHIFT_OFFSET_CH0 = shiftOffsetReg;
base->DITHER_FETCH_SHIFT_WIDTH_CH0 = shiftWidthReg;
}
break;
case 1:
base->DITHER_FETCH_CTRL_CH1 = ctrlReg;
base->DITHER_FETCH_ACTIVE_SIZE_ULC_CH1 = ulcReg;
base->DITHER_FETCH_ACTIVE_SIZE_LRC_CH1 = lrcReg;
base->DITHER_FETCH_SIZE_CH1 = fetchSizeReg;
base->DITHER_FETCH_PITCH = (base->INPUT_FETCH_PITCH & PXP_INPUT_FETCH_PITCH_CH0_INPUT_PITCH_MASK) |
((uint32_t)config->pitchBytes << 16U);
base->DITHER_FETCH_SHIFT_CTRL_CH1 = shiftCtrlReg;
base->DITHER_FETCH_ADDR_0_CH1 = config->inputBaseAddr0;
base->DITHER_FETCH_ADDR_1_CH1 = config->inputBaseAddr1;
if (!config->shiftConfig.shiftBypass)
{
base->DITHER_FETCH_SHIFT_OFFSET_CH1 = shiftOffsetReg;
base->DITHER_FETCH_SHIFT_WIDTH_CH1 = shiftWidthReg;
}
break;
default:
/* Only 2 channels are supported per fetch engine. */
assert(false);
break;
}
}
return kStatus_Success;
}
/*!
* brief Configures one channel of some block's store engine.
*
* Store engine is 32-bit input and 64-bit output per channel.
* note: If there is only one channel used for data input, channel 0 must be used rather than channel 1.
*
* param base PXP peripheral base address.
* param name the store engine belongs to which block.
* param channel channel number.
* param config pointer to the configuration structure.
* retval kStatus_Success Successfully configured the engine.
* retval kStatus_InvalidArgument Invalid argument.
*/
status_t PXP_SetStoreEngineConfig(PXP_Type *base,
pxp_store_engine_name_t name,
uint8_t channel,
const pxp_store_engine_config_t *config)
{
assert(NULL != config);
/* Can only choose one plane for YUV422_2p for one channel output */
if ((uint32_t)config->yuvMode == 0x3U)
{
return kStatus_InvalidArgument;
}
/* Block mode cannot work in 64-bit mode or YUV422_2p mode */
if ((config->storeFormat.enableblock == true) &&
((config->activeBits == kPXP_Active64Bits) || (config->yuvMode != kPXP_StoreYUVDisable)))
{
return kStatus_InvalidArgument;
}
/* When block mode is disabled the interface array size can only be 1. TODO. The availiable fetch engine now are
only input&fetch that can only use handshake 1x1, no need to check */
// if ((config->storeFormat.enableblock == false) && (config->arraySize != kPXP_StoreHandshake1x1))
// {
// return kStatus_InvalidArgument;
// }
uint32_t ctrlReg = 0U;
uint32_t shiftCtrlReg = 0U;
uint32_t sizeReg = 0U;
uint32_t dataShiftMaskRegAddr = 0U;
uint32_t dataShiftWidthRegAddr = 0U;
uint32_t flagShiftMaskRegAddr = 0U;
uint32_t flagShiftWidthRegAddr = 0U;
ctrlReg = PXP_INPUT_STORE_CTRL_CH0_WR_NUM_BYTES((uint32_t)config->storeFormat.burstLength) |
PXP_INPUT_STORE_CTRL_CH0_FILL_DATA_EN((uint32_t)config->useFixedData) |
PXP_INPUT_STORE_CTRL_CH0_PACK_IN_SEL((uint32_t)config->packInSelect) |
((uint32_t)config->interface << PXP_INPUT_STORE_CTRL_CH0_HANDSHAKE_EN_SHIFT) |
// PXP_INPUT_STORE_CTRL_CH0_ARRAY_LINE_NUM((uint32_t)config->arraySize) |
PXP_INPUT_STORE_CTRL_CH0_ARRAY_LINE_NUM(0U) |
PXP_INPUT_STORE_CTRL_CH0_BLOCK_16((uint32_t)config->storeFormat.enableblock) |
PXP_INPUT_STORE_CTRL_CH0_BLOCK_EN((uint32_t)config->storeFormat.blockSize16) |
PXP_INPUT_STORE_CTRL_CH0_CH_EN((uint32_t)config->channelEnable);
shiftCtrlReg = PXP_INPUT_STORE_SHIFT_CTRL_CH0_SHIFT_BYPASS((uint32_t)config->shiftConfig.shiftBypass) |
((uint32_t)config->yuvMode << PXP_INPUT_STORE_SHIFT_CTRL_CH0_OUT_YUV422_1P_EN_SHIFT) |
PXP_INPUT_STORE_SHIFT_CTRL_CH0_OUTPUT_ACTIVE_BPP((uint32_t)config->activeBits);
sizeReg = (((uint32_t)config->totalHeight) << 16U) | ((uint32_t)config->totalWidth);
if (name == kPXP_StoreInput)
{
switch (channel)
{
case 0:
base->INPUT_STORE_CTRL_CH0 = ctrlReg;
base->INPUT_STORE_SIZE_CH0 = sizeReg;
base->INPUT_STORE_PITCH = (base->INPUT_STORE_PITCH & PXP_INPUT_STORE_PITCH_CH0_OUT_PITCH_MASK) |
(uint32_t)(config->pitchBytes);
base->INPUT_STORE_SHIFT_CTRL_CH0 = shiftCtrlReg;
base->INPUT_STORE_ADDR_0_CH0 = config->outputBaseAddr0;
base->INPUT_STORE_ADDR_1_CH0 = config->outputBaseAddr1;
base->INPUT_STORE_FILL_DATA_CH0 = config->fixedData;
dataShiftMaskRegAddr = (uint32_t) & (base->INPUT_STORE_D_MASK0_H_CH0);
dataShiftWidthRegAddr = (uint32_t) & (base->INPUT_STORE_D_SHIFT_L_CH0);
flagShiftMaskRegAddr = (uint32_t) & (base->INPUT_STORE_F_MASK_L_CH0);
flagShiftWidthRegAddr = (uint32_t) & (base->INPUT_STORE_F_SHIFT_L_CH0);
break;
case 1:
base->INPUT_STORE_CTRL_CH1 = ctrlReg;
base->INPUT_STORE_SIZE_CH1 = sizeReg;
base->INPUT_STORE_PITCH = (base->INPUT_STORE_PITCH & PXP_INPUT_STORE_PITCH_CH0_OUT_PITCH_MASK) |
((uint32_t)(config->pitchBytes) << 16U);
base->INPUT_STORE_SHIFT_CTRL_CH1 = shiftCtrlReg;
base->INPUT_STORE_ADDR_0_CH1 = config->outputBaseAddr0;
base->INPUT_STORE_ADDR_1_CH1 = config->outputBaseAddr1;
dataShiftMaskRegAddr = (uint32_t) & (base->INPUT_STORE_D_MASK0_H_CH0);
dataShiftWidthRegAddr = (uint32_t) & (base->INPUT_STORE_D_SHIFT_L_CH0);
flagShiftMaskRegAddr = (uint32_t) & (base->INPUT_STORE_F_MASK_L_CH0);
flagShiftWidthRegAddr = (uint32_t) & (base->INPUT_STORE_F_SHIFT_L_CH0);
break;
default:
/* Only 2 channels are supported per fetch engine. */
assert(false);
break;
}
}
else
{
switch (channel)
{
case 0:
base->DITHER_STORE_CTRL_CH0 = ctrlReg;
base->DITHER_STORE_SIZE_CH0 = sizeReg;
base->DITHER_STORE_PITCH = (base->DITHER_STORE_PITCH & PXP_DITHER_STORE_PITCH_CH0_OUT_PITCH_MASK) |
(uint32_t)(config->pitchBytes);
base->DITHER_STORE_SHIFT_CTRL_CH0 = shiftCtrlReg;
base->DITHER_STORE_ADDR_0_CH0 = config->outputBaseAddr0;
base->DITHER_STORE_ADDR_1_CH0 = config->outputBaseAddr1;
base->DITHER_STORE_FILL_DATA_CH0 = config->fixedData;
dataShiftMaskRegAddr = (uint32_t) & (base->DITHER_STORE_D_MASK0_H_CH0);
dataShiftWidthRegAddr = (uint32_t) & (base->DITHER_STORE_D_SHIFT_L_CH0);
flagShiftMaskRegAddr = (uint32_t) & (base->DITHER_STORE_F_MASK_L_CH0);
flagShiftWidthRegAddr = (uint32_t) & (base->DITHER_STORE_F_SHIFT_L_CH0);
break;
case 1:
base->DITHER_STORE_CTRL_CH1 = ctrlReg;
base->DITHER_STORE_SIZE_CH1 = sizeReg;
base->DITHER_STORE_PITCH = (base->DITHER_STORE_PITCH & PXP_DITHER_STORE_PITCH_CH0_OUT_PITCH_MASK) |
((uint32_t)(config->pitchBytes) << 16U);
base->DITHER_STORE_SHIFT_CTRL_CH1 = shiftCtrlReg;
base->DITHER_STORE_ADDR_0_CH1 = config->outputBaseAddr0;
base->DITHER_STORE_ADDR_1_CH1 = config->outputBaseAddr1;
dataShiftMaskRegAddr = (uint32_t) & (base->DITHER_STORE_D_MASK0_H_CH0);
dataShiftWidthRegAddr = (uint32_t) & (base->DITHER_STORE_D_SHIFT_L_CH0);
flagShiftMaskRegAddr = (uint32_t) & (base->DITHER_STORE_F_MASK_L_CH0);
flagShiftWidthRegAddr = (uint32_t) & (base->DITHER_STORE_F_SHIFT_L_CH0);
break;
default:
/* Only 2 channels are supported per fetch engine. */
assert(false);
break;
}
}
/* Shift configuration */
if (!config->shiftConfig.shiftBypass)
{
uint8_t i;
uint32_t dataShiftMaskAddr = (uint32_t) & (config->shiftConfig.pDataShiftMask);
uint32_t dataShiftWidthAddr = (uint32_t) & (config->shiftConfig.pDataShiftWidth);
uint32_t flagShiftMaskAddr = (uint32_t) & (config->shiftConfig.pFlagShiftMask);
uint32_t flagShiftWidthAddr = (uint32_t) & (config->shiftConfig.pFlagShiftWidth);
/* Configure data shift mask */
for (i = 0U; i < 8U; i++)
{
*(uint32_t *)dataShiftMaskRegAddr = (uint32_t)(*(uint64_t *)dataShiftMaskAddr >> 32U);
dataShiftMaskRegAddr += 0x10U;
*(uint32_t *)dataShiftMaskRegAddr = (uint32_t)(*(uint64_t *)dataShiftMaskAddr);
dataShiftMaskRegAddr += 0x10U;
dataShiftMaskAddr += 8U;
}
/* Configure data shift width, flag shift mask/width */
for (i = 0U; i < 8U; i++)
{
*(uint8_t *)dataShiftWidthRegAddr = *(uint8_t *)dataShiftWidthAddr;
*(uint8_t *)flagShiftMaskRegAddr = *(uint8_t *)flagShiftMaskAddr;
*(uint8_t *)flagShiftWidthRegAddr = *(uint8_t *)flagShiftWidthAddr;
dataShiftWidthRegAddr++;
flagShiftMaskRegAddr++;
flagShiftWidthRegAddr++;
dataShiftWidthAddr++;
flagShiftMaskAddr++;
flagShiftWidthAddr++;
if (i == 3U)
{
dataShiftWidthRegAddr += 12U;
flagShiftMaskRegAddr += 12U;
flagShiftWidthRegAddr += 12U;
}
}
}
return kStatus_Success;
}
/*!
* brief Configures the pre-dither CFA engine.
*
* param base PXP peripheral base address.
* param config pointer to the configuration structure.
* retval kStatus_Success Successfully configured the engine.
* retval kStatus_InvalidArgument Invalid argument.
*/
status_t PXP_SetCfaConfig(PXP_Type *base, const pxp_cfa_config_t *config)
{
assert(NULL != config);
/* The CFA array cannot be larger than 15x15. */
if ((config->arrayWidth > 15U) || (config->arrayHeight > 15U))
{
return kStatus_InvalidArgument;
}
uint32_t cfaArrayRegAddr = (uint32_t) & (base->CFA_ARRAY0);
uint32_t cfaValueAddr = (uint32_t) & (config->cfaValue);
uint8_t wordCount = 0U; /* How many 32-bit word does the CFA array need. */
base->CFA_CTRL = PXP_CFA_CTRL_CFA_ARRAY_HSIZE((uint32_t)config->arrayWidth) |
PXP_CFA_CTRL_CFA_ARRAY_VSIZE((uint32_t)config->arrayHeight) |
PXP_CFA_CTRL_CFA_IN_RGB444((uint32_t)config->pixelInFormat) |
PXP_CFA_CTRL_CFA_BYPASS((uint32_t)config->bypass);
base->CFA_SIZE = ((uint32_t)(config->totalWidth) << 16U) | (uint32_t)(config->totalHeight);
/* Configure the CFA array value. */
wordCount = (config->arrayWidth * config->arrayHeight * 2U + 32U) / 32U;
for (uint8_t i = 0U; i < wordCount; i++)
{
*(uint32_t *)cfaArrayRegAddr = *(uint32_t *)cfaValueAddr;
cfaArrayRegAddr += 0x10U;
cfaValueAddr += 4U;
}
return kStatus_Success;
}
/*!
* brief Configures histogram engine.
*
* param base PXP peripheral base address.
* param num instance number.
* param config pointer to the configuration structure.
* retval kStatus_Success Successfully configured the engine.
* retval kStatus_InvalidArgument Invalid argument.
*/
status_t PXP_SetHistogramConfig(PXP_Type *base, uint8_t num, const pxp_histogram_config_t *config)
{
assert(NULL != config);
/* The LUT value width can not be larger than 6. */
if ((uint32_t)config->lutValueWidth > 6U)
{
return kStatus_InvalidArgument;
}
uint32_t ctrlReg = 0U;
uint32_t maskReg = 0U;
ctrlReg = PXP_HIST_A_CTRL_ENABLE((uint32_t)config->enable) |
PXP_HIST_A_CTRL_PIXEL_OFFSET((uint32_t)config->lutValueOffset) |
PXP_HIST_A_CTRL_PIXEL_WIDTH((uint32_t)config->lutValueWidth);
maskReg = PXP_HIST_A_MASK_MASK_EN((uint32_t)config->enableMask) |
PXP_HIST_A_MASK_MASK_MODE((uint32_t)config->condition) |
PXP_HIST_A_MASK_MASK_OFFSET((uint32_t)config->maskOffset) |
PXP_HIST_A_MASK_MASK_WIDTH((uint32_t)config->maskWidth) |
PXP_HIST_A_MASK_MASK_VALUE0((uint32_t)config->maskValue0) |
PXP_HIST_A_MASK_MASK_VALUE1((uint32_t)config->maskValue1);
switch (num)
{
case 0:
base->HIST_A_CTRL = ctrlReg;
base->HIST_A_MASK = maskReg;
base->HIST_A_BUF_SIZE = ((uint32_t)(config->totalHeight) << 16U) | (uint32_t)config->totalWidth;
break;
case 1:
base->HIST_B_CTRL = ctrlReg;
base->HIST_B_MASK = maskReg;
base->HIST_B_BUF_SIZE = ((uint32_t)(config->totalHeight) << 16U) | (uint32_t)config->totalWidth;
break;
default:
/* Only 2 histogram instances are supported. */
assert(false);
break;
}
/* Only configure the histogram params when user choose to, otherwise use the registers' reset value as default. */
if (config->pParamValue != NULL)
{
uint32_t paramRegAddr = (uint32_t) & (base->HIST2_PARAM);
uint32_t paramValueAddr = (uint32_t) & (config->pParamValue);
/* Configure the 2/4/8/16/32-level histogram params. */
for (uint8_t i = 0; i < 62U; i++)
{
*(uint8_t *)paramRegAddr = *(uint8_t *)paramValueAddr;
paramValueAddr += 1U;
paramRegAddr++;
if ((i % 4U) == 1U)
{
paramRegAddr += 12U;
if (i == 1U)
{
paramRegAddr += 2U;
}
}
}
}
return kStatus_Success;
}
/*!
* brief Gets the results of histogram mask operation.
*
* param base PXP peripheral base address.
* param num instance number.
* param result pointer to the result structure.
*/
void PXP_GetHistogramMaskResult(PXP_Type *base, uint8_t num, pxp_histogram_mask_result_t *result)
{
assert(NULL != result);
/* Initializes the result structure to zero. */
(void)memset(result, 0, sizeof(*result));
switch (num)
{
case 0:
result->pixelCount = base->HIST_A_TOTAL_PIXEL;
result->minX = (uint16_t)base->HIST_A_ACTIVE_AREA_X;
result->maxX = (uint16_t)(base->HIST_A_ACTIVE_AREA_X >> 16U);
result->minY = (uint16_t)base->HIST_A_ACTIVE_AREA_Y;
result->maxY = (uint16_t)(base->HIST_A_ACTIVE_AREA_Y >> 16U);
result->lutlist = (uint64_t)base->HIST_A_RAW_STAT0 | ((uint64_t)base->HIST_A_RAW_STAT1 << 32U);
break;
case 1:
result->pixelCount = base->HIST_B_TOTAL_PIXEL;
result->minX = (uint16_t)base->HIST_B_ACTIVE_AREA_X;
result->maxX = (uint16_t)(base->HIST_B_ACTIVE_AREA_X >> 16U);
result->minY = (uint16_t)base->HIST_B_ACTIVE_AREA_Y;
result->maxY = (uint16_t)(base->HIST_B_ACTIVE_AREA_Y >> 16U);
result->lutlist = (uint64_t)base->HIST_B_RAW_STAT0 | ((uint64_t)base->HIST_B_RAW_STAT1 << 32U);
break;
default:
/* Only 2 histogram instances are supported. */
assert(false);
break;
}
}
/*!
* brief Initializes the WFE-A engine for waveform process.
*
* param base PXP peripheral base address.
* param ditherHandshake true to enable handshake mode with upstream dither store engine.
*/
void PXP_WfeaInit(PXP_Type *base, bool ditherHandshake)
{
/* FETCH engine configuration, user fetch buffer1 for Y4 data buffer and buffer2 for working buffer. */
/* Enable buffer1&2 fetch. 2 bytes in each pixel for the buffer2.
Other default configurations: fetch data from external axi bus, normal(not hanshake or by pass) mode, burst
length 4, normal border pixels select(not sw reg mode), 1 line fetch, done IRQ disabled. */
base->WFA_FETCH_CTRL = PXP_WFA_FETCH_CTRL_BF1_EN(1UL) | PXP_WFA_FETCH_CTRL_BF2_EN(1UL) |
PXP_WFA_FETCH_CTRL_BF2_BYTES_PP(1UL) |
PXP_WFA_FETCH_CTRL_BF1_HSK_MODE((uint32_t)ditherHandshake);
/* Select pixel from bufer 2, set the right/left bit position on the original pixel as 0/3 */
/* Other default configurations: x/y offset=0, positive offset. */
base->WFA_ARRAY_PIXEL0_MASK = PXP_WFA_ARRAY_PIXEL0_MASK_BUF_SEL(1UL) | PXP_WFA_ARRAY_PIXEL0_MASK_L_OFS(3UL);
/* Select pixel from bufer 2, set the right/left bit position on the original pixel as 4/7 */
base->WFA_ARRAY_PIXEL1_MASK = PXP_WFA_ARRAY_PIXEL0_MASK_BUF_SEL(1UL) | PXP_WFA_ARRAY_PIXEL0_MASK_H_OFS(4UL) |
PXP_WFA_ARRAY_PIXEL0_MASK_L_OFS(7UL);
/* Select pixel from bufer 2, set the right/left bit position on the original pixel as 8/9 */
base->WFA_ARRAY_PIXEL2_MASK = PXP_WFA_ARRAY_PIXEL0_MASK_BUF_SEL(1UL) | PXP_WFA_ARRAY_PIXEL0_MASK_H_OFS(8UL) |
PXP_WFA_ARRAY_PIXEL0_MASK_L_OFS(9UL);
/* Select pixel from bufer 2, set the right/left bit position on the original pixel as 10/15 */
base->WFA_ARRAY_PIXEL3_MASK = PXP_WFA_ARRAY_PIXEL0_MASK_BUF_SEL(1UL) | PXP_WFA_ARRAY_PIXEL0_MASK_H_OFS(10UL) |
PXP_WFA_ARRAY_PIXEL0_MASK_L_OFS(15UL);
/* Select pixel from bufer 1, set the right/left bit position on the original pixel as 4/7 */
base->WFA_ARRAY_PIXEL4_MASK = PXP_WFA_ARRAY_PIXEL0_MASK_H_OFS(4UL) | PXP_WFA_ARRAY_PIXEL0_MASK_L_OFS(7UL);
/* Software define flag0=1, other flags 1~15 =0 */
base->WFA_ARRAY_REG2 = 1UL;
/* STORE engine configuration */
/* Channel 0 y4, channel 1 wb */
/* Enable channel 0, store data to memory, select low 32 bit shift out data to pack, enable combine 2 channel. */
/* Other default configurations: Arbitration disable(if using 2 channels, will output 2 axi bus sets), 8 bytes in a
burst, fill data mode disable, block mode disable. */
base->WFE_A_STORE_CTRL_CH0 = PXP_WFE_A_STORE_CTRL_CH0_CH_EN(1UL) | PXP_WFE_A_STORE_CTRL_CH0_STORE_MEMORY_EN(1UL) |
PXP_WFE_A_STORE_CTRL_CH0_PACK_IN_SEL(1UL) |
PXP_WFE_A_STORE_CTRL_CH0_COMBINE_2CHANNEL(1UL);
/* Enable channel 1, store data to memory, select low 32 bit shift out data to pack, 16 bytes in a write burst. */
base->WFE_A_STORE_CTRL_CH1 = PXP_WFE_A_STORE_CTRL_CH1_CH_EN(1UL) | PXP_WFE_A_STORE_CTRL_CH1_STORE_MEMORY_EN(1UL) |
PXP_WFE_A_STORE_CTRL_CH1_PACK_IN_SEL(1UL) | PXP_WFE_A_STORE_CTRL_CH1_WR_NUM_BYTES(1UL);
/* 8 Bpp, disable YUV planes, disable shift bypass. */
base->WFE_A_STORE_SHIFT_CTRL_CH0 = 0UL;
/* 16 Bpp, disable YUV planes, disable shift bypass. */
base->WFE_A_STORE_SHIFT_CTRL_CH1 = PXP_WFE_A_STORE_SHIFT_CTRL_CH1_OUTPUT_ACTIVE_BPP(1);
base->WFE_A_STORE_FILL_DATA_CH0 = 0UL;
/* 8 data masks, mask 0-7. Only use mask 0-4 */
/* mask 0: 0xF << 32; mask 1: 0xF00 << 28; mask 2: 0x0 << 24; mask 3: 0x3F00'0000 << 18; mask 4: 0xF'0000'0000 >> 28
*/
base->WFE_A_STORE_D_MASK0_H_CH0 = 0UL;
base->WFE_A_STORE_D_MASK0_L_CH0 = PXP_WFE_A_STORE_D_MASK0_L_CH0_D_MASK0_L_CH0(0xfUL); /* fetch CP */
base->WFE_A_STORE_D_MASK1_H_CH0 = 0UL;
base->WFE_A_STORE_D_MASK1_L_CH0 = PXP_WFE_A_STORE_D_MASK1_L_CH0_D_MASK1_L_CH0(0xf00UL); /* fetch NP */
base->WFE_A_STORE_D_MASK2_H_CH0 = 0UL;
base->WFE_A_STORE_D_MASK2_L_CH0 = 0UL;
base->WFE_A_STORE_D_MASK3_H_CH0 = 0UL;
base->WFE_A_STORE_D_MASK3_L_CH0 = PXP_WFE_A_STORE_D_MASK3_L_CH0_D_MASK3_L_CH0(0x3f000000UL); /* fetch LUT */
base->WFE_A_STORE_D_MASK4_H_CH0 = PXP_WFE_A_STORE_D_MASK4_H_CH0_D_MASK4_H_CH0(0xfUL);
base->WFE_A_STORE_D_MASK4_L_CH0 = 0UL; /* fetch Y4 */
base->WFE_A_STORE_D_SHIFT_L_CH0 =
PXP_WFE_A_STORE_D_SHIFT_L_CH0_D_SHIFT_WIDTH0(32UL) | PXP_WFE_A_STORE_D_SHIFT_L_CH0_D_SHIFT_FLAG0(1UL) |
PXP_WFE_A_STORE_D_SHIFT_L_CH0_D_SHIFT_WIDTH1(28UL) | PXP_WFE_A_STORE_D_SHIFT_L_CH0_D_SHIFT_FLAG1(1UL) |
PXP_WFE_A_STORE_D_SHIFT_L_CH0_D_SHIFT_WIDTH2(24UL) | PXP_WFE_A_STORE_D_SHIFT_L_CH0_D_SHIFT_FLAG2(1UL) |
PXP_WFE_A_STORE_D_SHIFT_L_CH0_D_SHIFT_WIDTH3(18UL) | PXP_WFE_A_STORE_D_SHIFT_L_CH0_D_SHIFT_FLAG3(1UL);
base->WFE_A_STORE_D_SHIFT_H_CH0 = PXP_WFE_A_STORE_D_SHIFT_H_CH0_D_SHIFT_WIDTH4(28UL);
/* 8 flag masks, mask 0-7. Only use mask 0-3 */
/* mask 0: 0x1 << 1; mask 1: 0x2 >> 1; mask 2: 0x4 << 38; mask 3: 0x8 << 38 */
/* Switch flag bit 0&1, bit 2&3 << 38 */
base->WFE_A_STORE_F_MASK_H_CH0 = 0UL;
base->WFE_A_STORE_F_MASK_L_CH0 =
PXP_WFE_A_STORE_F_MASK_L_CH0_F_MASK0(0x1UL) | PXP_WFE_A_STORE_F_MASK_L_CH0_F_MASK1(0x2UL) |
PXP_WFE_A_STORE_F_MASK_L_CH0_F_MASK2(0x4UL) | PXP_WFE_A_STORE_F_MASK_L_CH0_F_MASK3(0x8UL);
base->WFE_A_STORE_F_SHIFT_H_CH0 = 0UL;
base->WFE_A_STORE_F_SHIFT_L_CH0 =
PXP_WFE_A_STORE_F_SHIFT_L_CH0_F_SHIFT_WIDTH0(1UL) | PXP_WFE_A_STORE_F_SHIFT_L_CH0_F_SHIFT_FLAG0(1UL) |
PXP_WFE_A_STORE_F_SHIFT_L_CH0_F_SHIFT_WIDTH1(1UL) | PXP_WFE_A_STORE_F_SHIFT_L_CH0_F_SHIFT_FLAG1(0UL) |
PXP_WFE_A_STORE_F_SHIFT_L_CH0_F_SHIFT_WIDTH2(32UL + 6UL) | PXP_WFE_A_STORE_F_SHIFT_L_CH0_F_SHIFT_FLAG2(1UL) |
PXP_WFE_A_STORE_F_SHIFT_L_CH0_F_SHIFT_WIDTH3(32UL + 6UL) | PXP_WFE_A_STORE_F_SHIFT_L_CH0_F_SHIFT_FLAG3(1UL);
/* Enable and bypass the ALU process. */
base->ALU_A_INST_ENTRY = 0UL;
base->ALU_A_PARAM = 0UL;
base->ALU_A_CONFIG = 0UL;
base->ALU_A_LUT_CONFIG = 0UL;
base->ALU_A_LUT_DATA0 = 0UL;
base->ALU_A_LUT_DATA1 = 0UL;
base->ALU_A_CTRL = PXP_ALU_A_CTRL_BYPASS(1UL) | PXP_ALU_A_CTRL_ENABLE(1UL);
/* WFE A */
base->WFE_A_STAGE1_MUX0 = 0x3F3F0303UL;
base->WFE_A_STAGE1_MUX1 = 0x0C00000CUL;
base->WFE_A_STAGE1_MUX2 = 0x01040000UL;
base->WFE_A_STAGE1_MUX3 = 0x0A0A0904UL;
base->WFE_A_STAGE1_MUX4 = 0x00000B0BUL;
base->WFE_A_STAGE2_MUX0 = 0x1800280EUL;
base->WFE_A_STAGE2_MUX1 = 0x00280E01UL;
base->WFE_A_STAGE2_MUX2 = 0x280E0118UL;
base->WFE_A_STAGE2_MUX3 = 0x00011800UL;
base->WFE_A_STAGE2_MUX4 = 0UL;
base->WFE_A_STAGE2_MUX5 = 0x1800280EUL;
base->WFE_A_STAGE2_MUX6 = 0x00280E01UL;
base->WFE_A_STAGE2_MUX7 = 0x1A0E0118UL;
base->WFE_A_STAGE2_MUX8 = 0x1B012911UL;
base->WFE_A_STAGE2_MUX9 = 0x00002911UL;
base->WFE_A_STAGE2_MUX10 = 0UL;
base->WFE_A_STAGE2_MUX11 = 0UL;
base->WFE_A_STAGE2_MUX12 = 0UL;
base->WFE_A_STAGE3_MUX0 = 0x07060504UL;
base->WFE_A_STAGE3_MUX1 = 0x3F3F3F08UL;
base->WFE_A_STAGE3_MUX2 = 0x03020100UL;
base->WFE_A_STAGE3_MUX3 = 0x3F3F3F3FUL;
/* WFE_A_STG1_8X1_OUT0_0/1 is used to store LUT occupation status */
/* Set LUT64-255 to occupied since we only have 64 LUTs in EPDC */
base->WFE_A_STG1_8X1_OUT0_2 = 0xFFFFFFFFUL;
base->WFE_A_STG1_8X1_OUT0_3 = 0xFFFFFFFFUL;
base->WFE_A_STG1_8X1_OUT0_4 = 0xFFFFFFFFUL;
base->WFE_A_STG1_8X1_OUT0_5 = 0xFFFFFFFFUL;
base->WFE_A_STG1_8X1_OUT0_6 = 0xFFFFFFFFUL;
base->WFE_A_STG1_8X1_OUT0_7 = 0xFFFFFFFFUL;
/* OUT1.2.3 LUT0-255 */
base->WFE_A_STG1_8X1_OUT1_0 = 0UL;
base->WFE_A_STG1_8X1_OUT1_1 = 0UL;
base->WFE_A_STG1_8X1_OUT1_2 = 0UL;
base->WFE_A_STG1_8X1_OUT1_3 = 0UL;
base->WFE_A_STG1_8X1_OUT1_4 = 0UL;
base->WFE_A_STG1_8X1_OUT1_5 = 0UL;
base->WFE_A_STG1_8X1_OUT1_6 = 0UL;
base->WFE_A_STG1_8X1_OUT1_7 = 0UL;
base->WFE_A_STG1_8X1_OUT2_0 = 0UL;
base->WFE_A_STG1_8X1_OUT2_1 = 0UL;
base->WFE_A_STG1_8X1_OUT2_2 = 0UL;
base->WFE_A_STG1_8X1_OUT2_3 = 0UL;
base->WFE_A_STG1_8X1_OUT2_4 = 0UL;
base->WFE_A_STG1_8X1_OUT2_5 = 0UL;
base->WFE_A_STG1_8X1_OUT2_6 = 0UL;
base->WFE_A_STG1_8X1_OUT2_7 = 0UL;
base->WFE_A_STG1_8X1_OUT3_0 = 0UL;
base->WFE_A_STG1_8X1_OUT3_1 = 0UL;
base->WFE_A_STG1_8X1_OUT3_2 = 0UL;
base->WFE_A_STG1_8X1_OUT3_3 = 0UL;
base->WFE_A_STG1_8X1_OUT3_4 = 0UL;
base->WFE_A_STG1_8X1_OUT3_5 = 0UL;
base->WFE_A_STG1_8X1_OUT3_6 = 0UL;
base->WFE_A_STG1_8X1_OUT3_7 = 0UL;
/* LUTOUT0-31 for OUT0-3.
The 5x6 LUT output value for input value n. This output value determines which input to select (flag, data). */
base->WFE_A_STG2_5X6_OUT0_0 = 0x04040404UL;
base->WFE_A_STG2_5X6_OUT0_1 = 0x04040404UL;
base->WFE_A_STG2_5X6_OUT0_2 = 0x04050505UL;
base->WFE_A_STG2_5X6_OUT0_3 = 0x04040404UL;
base->WFE_A_STG2_5X6_OUT0_4 = 0x04040404UL;
base->WFE_A_STG2_5X6_OUT0_5 = 0x04040404UL;
base->WFE_A_STG2_5X6_OUT0_6 = 0x04040404UL;
base->WFE_A_STG2_5X6_OUT0_7 = 0x04040404UL;
base->WFE_A_STG2_5X6_OUT1_0 = 0x05050505UL;
base->WFE_A_STG2_5X6_OUT1_1 = 0x05050505UL;
base->WFE_A_STG2_5X6_OUT1_2 = 0x05080808UL;
base->WFE_A_STG2_5X6_OUT1_3 = 0x05050505UL;
base->WFE_A_STG2_5X6_OUT1_4 = 0x05050505UL;
base->WFE_A_STG2_5X6_OUT1_5 = 0x05050505UL;
base->WFE_A_STG2_5X6_OUT1_6 = 0x05050505UL;
base->WFE_A_STG2_5X6_OUT1_7 = 0x05050505UL;
base->WFE_A_STG2_5X6_OUT2_0 = 0x07070707UL;
base->WFE_A_STG2_5X6_OUT2_1 = 0x07070707UL;
base->WFE_A_STG2_5X6_OUT2_2 = 0x070C0C0CUL;
base->WFE_A_STG2_5X6_OUT2_3 = 0x07070707UL;
base->WFE_A_STG2_5X6_OUT2_4 = 0X0F0F0F0FUL;
base->WFE_A_STG2_5X6_OUT2_5 = 0X0F0F0F0FUL;
base->WFE_A_STG2_5X6_OUT2_6 = 0X0F0F0F0FUL;
base->WFE_A_STG2_5X6_OUT2_7 = 0X0F0F0F0FUL;
base->WFE_A_STG2_5X6_OUT3_0 = 0UL;
base->WFE_A_STG2_5X6_OUT3_1 = 0UL;
base->WFE_A_STG2_5X6_OUT3_2 = 0UL;
base->WFE_A_STG2_5X6_OUT3_3 = 0UL;
base->WFE_A_STG2_5X6_OUT3_4 = 0UL;
base->WFE_A_STG2_5X6_OUT3_5 = 0UL;
base->WFE_A_STG2_5X6_OUT3_6 = 0UL;
base->WFE_A_STG2_5X6_OUT3_7 = 0UL;
/* MASK0-3, 5 bits each mask.
Each set mask bit enables one of the corresponding flag input bits. There is one mask per 5x6 LUT. */
base->WFE_A_STAGE2_5X6_MASKS_0 = 0x001F1F1FUL;
/* MUXADDR 0-3, 6 bits each.
Each Address specifies the MUX position in the MUX array. There is one MUXADDR per 5x6 LUT.*/
base->WFE_A_STAGE2_5X6_ADDR_0 = 0x3f030100UL;
/* Flag of LUTOUT0-31 for OUT0-3.
The 5x1 LUT output value for input value n. This output value results in a flag that is added to the flag array.
*/
base->WFE_A_STG2_5X1_OUT0 = 0x00000700UL;
base->WFE_A_STG2_5X1_OUT1 = 0x00007000UL;
base->WFE_A_STG2_5X1_OUT2 = 0x0000A000UL;
base->WFE_A_STG2_5X1_OUT3 = 0x000000C0UL;
/* MASK0-3, 5 bits each mask.
Each set mask bit enables one of the corresponding flag input bits. There is one mask per 5x1 LUT. */
base->WFE_A_STG2_5X1_MASKS = 0x071F1F1FUL;
}
/*!
* brief Configure the WFE-A engine
*
* param base PXP peripheral base address.
* param config pointer to the configuration structure.
*/
void PXP_SetWfeaConfig(PXP_Type *base, const pxp_wfea_engine_config_t *config)
{
/* Fetch */
base->WFA_FETCH_BUF1_ADDR = config->y4Addr;
base->WFA_FETCH_BUF1_PITCH = config->updatePitch;
base->WFA_FETCH_BUF1_SIZE = PXP_WFA_FETCH_BUF1_SIZE_BUF_HEIGHT((uint32_t)config->updateHeight - 1UL) |
PXP_WFA_FETCH_BUF1_SIZE_BUF_WIDTH((uint32_t)config->updateWidth - 1UL);
base->WFA_FETCH_BUF1_CORD = 0UL;
base->WFA_FETCH_BUF2_ADDR = config->wbAddr;
base->WFA_FETCH_BUF2_PITCH = (uint32_t)config->resX * 2U; /* 2 bytes per pixel */
base->WFA_FETCH_BUF2_SIZE = PXP_WFA_FETCH_BUF1_SIZE_BUF_HEIGHT((uint32_t)config->updateHeight - 1UL) |
PXP_WFA_FETCH_BUF1_SIZE_BUF_WIDTH((uint32_t)config->updateWidth - 1UL);
base->WFA_FETCH_BUF2_CORD =
PXP_WFA_FETCH_BUF2_CORD_YCORD((uint32_t)config->ulcY) | PXP_WFA_FETCH_BUF2_CORD_XCORD((uint32_t)config->ulcX);
/* Store */
base->WFE_A_STORE_SIZE_CH0 = PXP_WFE_A_STORE_SIZE_CH0_OUT_WIDTH((uint32_t)config->updateWidth - 1UL) |
PXP_WFE_A_STORE_SIZE_CH0_OUT_HEIGHT((uint32_t)config->updateHeight - 1UL);
base->WFE_A_STORE_SIZE_CH1 = PXP_WFE_A_STORE_SIZE_CH0_OUT_WIDTH((uint32_t)config->updateWidth - 1UL) |
PXP_WFE_A_STORE_SIZE_CH0_OUT_HEIGHT((uint32_t)config->updateHeight - 1UL);
/* Channel 1: 2 byte per pixel. */
base->WFE_A_STORE_PITCH = PXP_WFE_A_STORE_PITCH_CH0_OUT_PITCH((uint32_t)config->resX) |
PXP_WFE_A_STORE_PITCH_CH1_OUT_PITCH((uint32_t)config->resX * 2U);
base->WFE_A_STORE_ADDR_0_CH0 = PXP_WFE_A_STORE_ADDR_0_CH0_OUT_BASE_ADDR0(config->y4cAddr);
base->WFE_A_STORE_ADDR_1_CH0 = 0U;
/* Channel 1: 2 bytes per pixel. */
base->WFE_A_STORE_ADDR_0_CH1 = PXP_WFE_A_STORE_ADDR_0_CH1_OUT_BASE_ADDR0(
(uint32_t)config->wbAddr + ((uint32_t)config->ulcX + (uint32_t)config->ulcY * (uint32_t)config->resX) * 2UL);
base->WFE_A_STORE_ADDR_1_CH1 = 0U;
/* ALU */
base->ALU_A_BUF_SIZE = PXP_ALU_A_BUF_SIZE_BUF_WIDTH((uint32_t)config->updateWidth) |
PXP_ALU_A_BUF_SIZE_BUF_HEIGHT((uint32_t)config->updateHeight);
/* WFE */
/* Height and width of the updete region */
base->WFE_A_DIMENSIONS =
PXP_WFE_A_DIMENSIONS_WIDTH(config->updateWidth) | PXP_WFE_A_DIMENSIONS_HEIGHT(config->updateHeight);
/* The distance from the frame origin to the update region origin in the X/Y direction. */
base->WFE_A_OFFSET = PXP_WFE_A_OFFSET_X_OFFSET(config->ulcX) | PXP_WFE_A_OFFSET_Y_OFFSET(config->ulcY);
/* val3,val2=0, val1=F, val0=lutNum */
base->WFE_A_SW_DATA_REGS = (config->lutNum & 0x000000FFUL) | 0x00000F00UL;
/* val3,val2=0, val1=0(disable reagl/-d), val0=partial(1)full(0) */
base->WFE_A_SW_FLAG_REGS = ((uint32_t)(!config->fullUpdateEnable) | (0U << 1U));
/* Enable and reset WFE-A state. Disable register of ALU inside waveform as default. */
base->WFE_A_CTRL = PXP_WFE_A_CTRL_ENABLE(1UL) | PXP_WFE_A_CTRL_SW_RESET(1UL);
if (config->alphaEnable)
{
base->WFA_ARRAY_FLAG0_MASK = 0U;
}
else
{
base->WFA_ARRAY_FLAG0_MASK = PXP_WFA_ARRAY_FLAG0_MASK_BUF_SEL(2UL);
}
/* disable CH1 when only doing detection */
if (config->detectionOnly)
{
base->WFE_A_STORE_CTRL_CH1 &= ~PXP_WFE_A_STORE_CTRL_CH1_CH_EN(1UL);
}
else
{
base->WFE_A_STORE_CTRL_CH1 |= PXP_WFE_A_STORE_CTRL_CH1_CH_EN(1UL);
}
/* Enable engine */
base->CTRL_SET = PXP_CTRL_ENABLE_WFE_A(1UL);
}
#endif /* FSL_FEATURE_PXP_V3 */
#if PXP_USE_PATH
/*!
* brief Sets the path for one of the MUX
*
* param base PXP peripheral base address.
* param path the path configuration for one of the mux.
*/
void PXP_SetPath(PXP_Type *base, pxp_path_t path)
{
volatile uint32_t *pathReg;
uint32_t mux = PXP_GET_MUX_FROM_PATH((uint32_t)path);
uint32_t sel = PXP_GET_SEL_FROM_PATH((uint32_t)path);
if (mux > 15U)
{
pathReg = &(base->DATA_PATH_CTRL1);
mux -= 15U;
}
else
{
pathReg = &(base->DATA_PATH_CTRL0);
}
/* Convert mux to the register shift. */
mux *= 2U;
*pathReg = (*pathReg & ~(3UL << mux)) | (sel << mux);
}
#endif /* PXP_USE_PATH */
View Git Blame Copy Permalink