libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/imxrt/libraries/MIMXRT1170/MIMXRT1176/drivers/fsl_ocotp.c

407 lines
12 KiB
C
Raw Blame History

/*
* Copyright 2019-2020 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "fsl_ocotp.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.ocotp"
#endif
#if defined(FSL_FEATURE_OCOTP_HAS_STATUS) && FSL_FEATURE_OCOTP_HAS_STATUS
#define OCOTP_STATUS_READ_DED_MASK \
(OCOTP_OUT_STATUS0_DED0_MASK | OCOTP_OUT_STATUS0_DED1_MASK | OCOTP_OUT_STATUS0_DED2_MASK | \
OCOTP_OUT_STATUS0_DED3_MASK)
#endif
/* Wait time should be not less than 150ns . */
#define OCOTP_TIMING_WAIT_NS (uint64_t)150
/* Relex time should be not less than 100ns . */
#define OCOTP_TIMING_RELEX_NS (uint64_t)100
/* Program time should be rang from 9000ns~11000ns. */
#define OCOTP_TIMING_PROGRAM_NS (uint64_t)10000
/* Read time should be less than 40ns. */
#define OCOTP_TIMING_READ_NS (uint64_t)40
/* Unlock key is 0x3E77. */
#define OCOTP_WRITE_UNLOCK_KEY (0x3E77)
/*******************************************************************************
* Prototypes
******************************************************************************/
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
/*!
* @brief Set read timing configuration.
*
* @param base OCOTP peripheral base addess.
* @param timingConfig configuration of timing.
*/
static void OCOTP_SetReadTiming(OCOTP_Type *base, ocotp_timing_t timingConfig);
/*!
* @brief Set write timing configuration.
*
* @param base OCOTP peripheral base addess.
* @param timingConfig configuration of timing.
*/
static void OCOTP_SetWriteTiming(OCOTP_Type *base, ocotp_timing_t timingConfig);
#endif
/*******************************************************************************
* Variables
******************************************************************************/
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
/* Timing configuration for OCOTP controller. */
static ocotp_timing_t s_timingConfig;
#endif
/*******************************************************************************
* Code
*******************************************************************************/
/* Reload the shadow register. */
status_t OCOTP_ReloadShadowRegister(OCOTP_Type *base)
{
assert(NULL != base);
status_t status = kStatus_Success;
/* Make sure the OCOTP is ready, Overlapped accesses are not supported by the controller. */
while (OCOTP_CheckBusyStatus(base))
{
}
/* Clear access error status bit. */
OCOTP_ClearErrorStatus(base);
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
/* Set the read timing. */
OCOTP_SetReadTiming(base, s_timingConfig);
/* Wait for the OCOTP controller not busy. */
while (OCOTP_CheckBusyStatus(base))
{
}
#endif
#if defined(OCOTP_OUT_STATUS0_DED_RELOAD_MASK)
/* Clear reload error status. */
base->OUT_STATUS0_CLR = OCOTP_OUT_STATUS0_DED_RELOAD_MASK;
#endif
/* Set reload bit. */
base->CTRL_SET = OCOTP_CTRL_RELOAD_SHADOWS(1);
/* Wait for the OCOTP controller not busy. */
while (OCOTP_CheckBusyStatus(base))
{
}
/* Wait for shadow register reload complete. this bit will be auto clear by OCOTP once operation is complete. */
while (OCOTP_CTRL_RELOAD_SHADOWS_MASK == (base->CTRL & OCOTP_CTRL_RELOAD_SHADOWS_MASK))
{
}
#if defined(OCOTP_OUT_STATUS0_DED_RELOAD_MASK)
if ((base->OUT_STATUS0 & OCOTP_OUT_STATUS0_DED_RELOAD_MASK) != 0U)
{
status = kStatus_OCOTP_ReloadError;
}
#endif
return status;
}
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
static void OCOTP_SetReadTiming(OCOTP_Type *base, ocotp_timing_t timingConfig)
{
uint32_t timingValue = base->TIMING;
timingValue &= ~(OCOTP_TIMING_RELAX_MASK | OCOTP_TIMING_STROBE_READ_MASK | OCOTP_TIMING_WAIT_MASK);
timingValue |= OCOTP_TIMING_RELAX(timingConfig.relax) | OCOTP_TIMING_STROBE_READ(timingConfig.strobe_read) |
OCOTP_TIMING_WAIT(timingConfig.wait);
base->TIMING = timingValue;
}
static void OCOTP_SetWriteTiming(OCOTP_Type *base, ocotp_timing_t timingConfig)
{
uint32_t timingValue = base->TIMING;
timingValue &= ~(OCOTP_TIMING_RELAX_MASK | OCOTP_TIMING_STROBE_PROG_MASK | OCOTP_TIMING_WAIT_MASK);
timingValue |= OCOTP_TIMING_RELAX(timingConfig.relax) | OCOTP_TIMING_STROBE_PROG(timingConfig.strobe_prog) |
OCOTP_TIMING_WAIT(timingConfig.wait);
base->TIMING = timingValue;
}
#endif
/* Initializes OCOTP controller. */
void OCOTP_Init(OCOTP_Type *base, uint32_t srcClock_Hz)
{
assert(NULL != base);
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
assert(0UL != srcClock_Hz);
#endif
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/* Enable OCOTP clock */
CLOCK_EnableClock(kCLOCK_Ocotp);
#endif
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
/* tWait time shoule be higher than OCOTP_TIMING_WAIT_NS. */
s_timingConfig.wait = (uint32_t)((OCOTP_TIMING_WAIT_NS * srcClock_Hz + 1000000000U) / 1000000000U - 1U);
/* tRelax time shoule be higher than OCOTP_TIMING_RELEX_NS. */
s_timingConfig.relax = (uint32_t)((OCOTP_TIMING_RELEX_NS * srcClock_Hz + 1000000000U) / 1000000000U - 1U);
/* tStrobe_prog time should be close to OCOTP_TIMING_PROGRAM_NS, only add half of 1000000000. */
s_timingConfig.strobe_prog = (uint32_t)((OCOTP_TIMING_PROGRAM_NS * srcClock_Hz + 500000000U) / 1000000000U) +
2U * (s_timingConfig.relax + 1U) - 1U;
/* tStrobe_read time should be higher than OCOTP_TIMING_READ_NS. */
s_timingConfig.strobe_read = (uint32_t)((OCOTP_TIMING_READ_NS * srcClock_Hz + 1000000000U) / 1000000000U) +
2U * (s_timingConfig.relax + 1U) - 1U;
#endif
}
/* De-init OCOTP controller. */
void OCOTP_Deinit(OCOTP_Type *base)
{
assert(NULL != base);
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
s_timingConfig.wait = 0UL;
s_timingConfig.relax = 0UL;
s_timingConfig.strobe_prog = 0UL;
s_timingConfig.strobe_read = 0UL;
#endif
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/* Disable OCOTP clock */
CLOCK_DisableClock(kCLOCK_Ocotp);
#endif
}
/* Read the fuse shadow register. */
uint32_t OCOTP_ReadFuseShadowRegister(OCOTP_Type *base, uint32_t address)
{
assert(NULL != base);
uint32_t data = 0U;
(void)OCOTP_ReadFuseShadowRegisterExt(base, address, &data, 1);
return data;
}
status_t OCOTP_ReadFuseShadowRegisterExt(OCOTP_Type *base, uint32_t address, uint32_t *data, uint8_t fuseWords)
{
assert((fuseWords > 0U) && (fuseWords <= OCOTP_READ_FUSE_DATA_COUNT));
assert(NULL != data);
status_t status = kStatus_Success;
#if (OCOTP_READ_FUSE_DATA_COUNT > 1U)
uint32_t i;
#endif
/* Make sure the OCOTP is ready, Overlapped accesses are not supported by the controller. */
while (OCOTP_CheckBusyStatus(base))
{
}
/* If ERROR bit was set, clear access error status bit. */
if (OCOTP_CheckErrorStatus(base))
{
OCOTP_ClearErrorStatus(base);
}
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
/* Set the read timing. */
OCOTP_SetReadTiming(base, s_timingConfig);
/* Wait for busy bit is cleared. */
while (OCOTP_CheckBusyStatus(base))
{
}
/* Clear access error status bit. */
if (OCOTP_CheckErrorStatus(base))
{
OCOTP_ClearErrorStatus(base);
}
#endif
#if defined(OCOTP_STATUS_READ_DED_MASK)
/* Clear error flags. */
base->OUT_STATUS0_CLR = OCOTP_STATUS_READ_DED_MASK;
#endif
/* Write requested address to register. */
base->CTRL_CLR = OCOTP_CTRL_CLR_ADDR_MASK;
base->CTRL_SET = OCOTP_CTRL_SET_ADDR(address);
/* Set OCOTP auto read enable. */
#if defined(OCOTP_READ_CTRL_READ_NUM_MASK)
base->READ_CTRL = (base->READ_CTRL & ~(OCOTP_READ_CTRL_READ_NUM_MASK)) |
OCOTP_READ_CTRL_READ_NUM((uint32_t)fuseWords - 1U) | OCOTP_READ_CTRL_READ_FUSE_MASK;
#else
base->READ_CTRL |= OCOTP_READ_CTRL_READ_FUSE_MASK;
#endif
/* Wait for busy bit is cleared, and no error occurred on controller. */
while (OCOTP_CheckBusyStatus(base))
{
}
/* If ERROR bit was set, this may be mean that the accsee to the register was wrong. */
if (OCOTP_CheckErrorStatus(base))
{
/* Clear access error status bit. */
OCOTP_ClearErrorStatus(base);
status = kStatus_OCOTP_AccessError;
}
#if defined(OCOTP_STATUS_READ_DED_MASK)
if ((base->OUT_STATUS0 & OCOTP_STATUS_READ_DED_MASK) != 0U)
{
status = kStatus_Fail;
}
#endif
#if (OCOTP_READ_FUSE_DATA_COUNT == 1U)
*data = base->READ_FUSE_DATA;
#else
for (i = 0; i < fuseWords; i++)
{
data[i] = base->READ_FUSE_DATAS[i].READ_FUSE_DATA;
}
#endif
return status;
}
/* Write the fuse shadow register. */
status_t OCOTP_WriteFuseShadowRegister(OCOTP_Type *base, uint32_t address, uint32_t data)
{
return OCOTP_WriteFuseShadowRegisterWithLock(base, address, data, false);
}
status_t OCOTP_WriteFuseShadowRegisterWithLock(OCOTP_Type *base, uint32_t address, uint32_t data, bool lock)
{
assert(NULL != base);
status_t status = kStatus_Success;
#if defined(FSL_FEATURE_OCOTP_HAS_STATUS) && FSL_FEATURE_OCOTP_HAS_STATUS
uint32_t regStatus;
#endif
#if !(defined(FSL_FEATURE_OCOTP_HAS_WORDLOCK) && FSL_FEATURE_OCOTP_HAS_WORDLOCK)
if (lock)
{
return kStatus_InvalidArgument;
}
#endif
/* Make sure the OCOTP is ready, Overlapped accesses are not supported by the controller. */
while (OCOTP_CheckBusyStatus(base))
{
}
/* Clear access error status bit. */
if (OCOTP_CheckErrorStatus(base))
{
OCOTP_ClearErrorStatus(base);
}
#if (defined(FSL_FEATURE_OCOTP_HAS_TIMING_CTRL) && FSL_FEATURE_OCOTP_HAS_TIMING_CTRL)
/* Set write timing for OCOTP controller. */
OCOTP_SetWriteTiming(base, s_timingConfig);
/* Wait for busy bit is cleared. */
while (OCOTP_CheckBusyStatus(base))
{
}
/* Clear access error status bit. */
if (OCOTP_CheckErrorStatus(base))
{
OCOTP_ClearErrorStatus(base);
}
#endif
#if defined(FSL_FEATURE_OCOTP_HAS_STATUS) && FSL_FEATURE_OCOTP_HAS_STATUS
/* Clear errors. */
base->OUT_STATUS0_CLR = (OCOTP_OUT_STATUS0_PROGFAIL_MASK | OCOTP_OUT_STATUS0_LOCKED_MASK);
#endif
/* Write requested address and unlock key to register. */
#if (defined(FSL_FEATURE_OCOTP_HAS_WORDLOCK) && FSL_FEATURE_OCOTP_HAS_WORDLOCK)
base->CTRL_CLR = OCOTP_CTRL_CLR_ADDR_MASK | OCOTP_CTRL_WR_UNLOCK_MASK | OCOTP_CTRL_WORDLOCK_MASK;
#else
base->CTRL_CLR = OCOTP_CTRL_CLR_ADDR_MASK | OCOTP_CTRL_WR_UNLOCK_MASK;
#endif
#if (defined(FSL_FEATURE_OCOTP_HAS_WORDLOCK) && FSL_FEATURE_OCOTP_HAS_WORDLOCK)
if (lock)
{
base->CTRL_SET =
OCOTP_CTRL_SET_ADDR(address) | OCOTP_CTRL_WR_UNLOCK(OCOTP_WRITE_UNLOCK_KEY) | OCOTP_CTRL_WORDLOCK_MASK;
}
else
#endif
{
base->CTRL_SET = OCOTP_CTRL_SET_ADDR(address) | OCOTP_CTRL_WR_UNLOCK(OCOTP_WRITE_UNLOCK_KEY);
}
/* Write data to register. */
base->DATA = data;
/* Wait for busy bit is cleared, and no error occurred on controller. */
while (OCOTP_CheckBusyStatus(base))
{
}
/* If ERROR bit was set, this may be mean that the accsee to the register was wrong. */
if (OCOTP_CheckErrorStatus(base))
{
/* Clear access error status bit. */
OCOTP_ClearErrorStatus(base);
status = kStatus_OCOTP_AccessError;
}
#if defined(FSL_FEATURE_OCOTP_HAS_STATUS) && FSL_FEATURE_OCOTP_HAS_STATUS
regStatus = base->OUT_STATUS0;
if ((regStatus & OCOTP_OUT_STATUS0_PROGFAIL_MASK) != 0U)
{
status = kStatus_OCOTP_ProgramFail;
}
else if ((regStatus & OCOTP_OUT_STATUS0_LOCKED_MASK) != 0U)
{
status = kStatus_OCOTP_Locked;
}
else
{
/* For MISRA rules. */
}
#endif
if (kStatus_Success == status)
{
/* Reload the fuse register. */
status = OCOTP_ReloadShadowRegister(base);
}
return status;
}
View Git Blame Copy Permalink