rt-thread-official/bsp/stm32/stm32f469-st-disco
Meco Man 85294a8e86 [RTduino][STM32] 优化内置ADC通道 2023-04-08 22:40:55 -04:00
..
applications [RTduino][STM32] 优化内置ADC通道 2023-04-08 22:40:55 -04:00
board [stm32][qspi] qspi attach 函数问题解决方案 (#6867) 2023-01-18 22:04:45 -05:00
figures 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00
.config sync and update all projects (#7138) 2023-03-31 16:49:48 +08:00
.gitignore 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00
Kconfig format Kconfig and sconscript 2023-01-08 22:52:13 -05:00
README.md [bsp][stm32f469-st-disco] 增加英文readme 2022-03-14 14:40:34 +08:00
README_zh.md [bsp][stm32f469-st-disco] 增加英文readme 2022-03-14 14:40:34 +08:00
SConscript 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00
SConstruct [Scons][iar][iccarm] IAR统一使用iccarm作为判断条件而不是是用IDE的名字来进行判断 2022-06-09 07:01:59 +08:00
project.ewd 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00
project.ewp sync and update all projects (#7138) 2023-03-31 16:49:48 +08:00
project.eww 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00
project.uvopt [BSP][STM32][F469-DISCO]Add lcd drivers 2019-04-22 16:04:26 +08:00
project.uvoptx 更新 stm32 工程,nxp 工程 2020-12-28 15:02:17 +08:00
project.uvproj sync and update all projects (#7138) 2023-03-31 16:49:48 +08:00
project.uvprojx sync and update all projects (#7138) 2023-03-31 16:49:48 +08:00
rtconfig.h sync and update all projects (#7138) 2023-03-31 16:49:48 +08:00
rtconfig.py [scons][iar] 将IAR的PLATFORM字段由iar调整为iccarm 2022-06-09 07:01:59 +08:00
template.ewp 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00
template.eww 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00
template.uvopt 【修改】Kconfig配置,与README.md保持一致。 2019-04-10 10:48:23 +08:00
template.uvoptx 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00
template.uvproj 【修改】Kconfig配置,与README.md保持一致。 2019-04-10 10:48:23 +08:00
template.uvprojx 【增加】stm32f469-st-disco开发板的BSP 2019-04-09 19:52:21 +08:00

README.md

STM32F469-ST-DISCO BSP Introduction

中文

This document records the instruction of the BSP (board support package) that provided by the RT-Thread development team for the STM32F469-ST-DISCO development board.

The document is covered in three parts:

  • Resources Introduction
  • Quickly Get Started
  • Advanced Features

By reading the Quickly Get Started section developers can quickly get their hands on this BSP and run RT-Thread on the board. More advanced features will be introduced in the Advanced Features section to help developers take advantage of RT-Thread to drive more on-board resources.

Resources Introduction

The STM32F469 Discovery kit allows users to easily develop applications with the STM32F469 high-performance MCUs with ARM®Cortex®-M4 core and Chrom-ART Accelerator™. The discovery kit enables a wide range of use cases taking advantage of premium graphics, audio, multi-sensor support, WVGA color display, security, memory extension and connectivity features.

board

Features:

  • MCU: STM32F469NIH6U, 180MHz, 2048KB FLASH, 384KB(Includes 64KB CCM) RAM
  • External RAM: 25Q128A, 16MB
  • External FLASH: 7LL12D9NOR, 16MB
  • Common-used Peripherals:
    • LED: 4, LD1(Green, PG6), LD2(Orange, PD4), LD3(Red,PD5), LD4(Blue, PK3)
    • Button: 1, USER( has wake-up feature, PA0
    • LCD4 inches 800x480 pixel TFT
    • Audio: SAI Audio DAC
  • Common-used interface: Arduino UNO V3 、MicroSD Card、Audio、LCD、I2C, etc.
  • Debugging interface, standard ST-LINK/V2-1 SWD

More info about this board, please check ST Official.

Peripherals Condition

Each peripheral supporting condition for this BSP is as follows:

On-board Peripherals Support Remark
SDRAM 16MB
LCD MIPI LCD, otm8009a
SDCARD Support hot swapping, plug-in detection interval of 200ms
TOUCH ft6206
On-chip Peripherals Support Remark
GPIO
USART v USART3
SPI SPI3
QSPI
I2C I2C
FLASH Fits to FAL
SDI
USB Device
Expansion Module Support Remark
N/A N/A N/A

Quickly Get Started

This BSP provides MDK4, MDK5, and IAR projects for developers and it supports the GCC development environment. Here's an example of the MDK5 development environment, to introduce how to run the system.

Hardware Connection

Use a cable to connect the development board to the PC and turn on the power switch.

Compile and Download

Double-click the project.uvprojx file to open the MDK5 project, compile and download the program to the development board.

The project defaults to use the st-link emulator to download the program, and as we're connecting the development board via st-link, click the Download button can directly download the program to the development board.

Running Results

After the program is successfully downloaded, the system runs automatically. The LED(LD1, Green) will flash.

Connect the corresponding serial port of the development board to the PC, and when the corresponding serial port ( 115200-8-1-N) is opened in the terminal tool, the output information of RT-Thread can be seen when the device is reset:

 \ | /
- RT -     Thread Operating System
 / | \     4.0.1 build Apr  9 2019
 2006 - 2019 Copyright by rt-thread team
msh >

Advanced Features

This BSP only enables GPIO and UART3 by default. If you need more advanced features such as SD Card, Flash, or you need to configure the BSP with RT-Thread homegrown ENV tool, as follows:

  1. Open the ENV tool under the specific BSP folder;
  2. Enter menuconfig command to configure the project, then save and exit;
  3. Enter pkgs --update command to update the package;
  4. Enter scons --target=mdk4/mdk5/iar command to regenerate the project.