rt-thread-official/bsp/stm32/stm32f410-st-nucleo/applications/arduino_pinout/pins_arduino.c

49 lines
1.7 KiB
C

/*
* Copyright (c) 2006-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2022-11-13 lpy first version
*/
#include <Arduino.h>
#include <board.h>
#include "pins_arduino.h"
/*
* {Arduino Pin, RT-Thread Pin [, Device Name, Channel]}
* [] means optional
* Digital pins must NOT give the device name and channel.
* Analog pins MUST give the device name and channel(ADC, PWM or DAC).
* Arduino Pin must keep in sequence.
*/
const pin_map_t pin_map_table[]=
{
{D0, GET_PIN(A,3), "uart2"}, /* Serial-RX */
{D1, GET_PIN(A,2), "uart2"}, /* Serial-TX */
{D2, GET_PIN(A,10), "pwm1", 3}, /* PWM */
{D3, GET_PIN(B,3)},
{D4, GET_PIN(B,5)},
{D5, GET_PIN(B,4)},
{D6, GET_PIN(B,10)},
{D7, GET_PIN(A,8)},
{D8, GET_PIN(A,9), "pwm1", 2}, /* PWM */
{D9, GET_PIN(C,7)},
{D10, GET_PIN(B,6)},
{D11, GET_PIN(A,7), "pwm1", -1}, /* PWM */
{D12, GET_PIN(A,6)},
{D13, GET_PIN(A,5)}, /* LED_BUILTIN */
{D14, GET_PIN(B,9), "i2c1"}, /* I2C-SDA (Wire) */
{D15, GET_PIN(B,8), "i2c1"}, /* I2C-SCL (Wire) */
{A0, GET_PIN(A,0), "adc1", 0}, /* ADC */
{A1, GET_PIN(A,1), "adc1", 1}, /* ADC */
{A2, GET_PIN(A,4), "adc1", 4}, /* ADC */
{A3, GET_PIN(B,0), "adc1", 8}, /* ADC */
{A4, GET_PIN(C,1), "adc1", 11}, /* ADC */
{A5, GET_PIN(C,0), "adc1", 10}, /* ADC */
{A6, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */
{A7, RT_NULL, "adc1", 16}, /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */
};