libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/Infineon/libraries/HAL_Drivers/drv_sdcard.c

361 lines
12 KiB
C
Raw Blame History

/*
* Copyright (c) 2006-2024 RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2023-05-05 vandoul first
*/
#include <rtthread.h>
#include "cy_gpio.h"
#include "cyhal_gpio.h"
#include "cyhal_sdhc.h"
#ifdef BSP_USING_SDCARD
/*#define DRV_DEBUG*/
#define LOG_TAG "drv.sdio"
#include <drv_log.h>
#define SDIO_BLOCK_SIZE (512)
#if BSP_USING_SDCARD_LED_CTRL_ENANBLE
#define SDCARD_LED_CTRL_ENABLE true
#else
#define SDCARD_LED_CTRL_ENABLE false
#endif
#if BSP_USING_SDCARD_EMMC_ENANBLE
#define SDCARD_EMMC_ENABLE true
#else
#define SDCARD_EMMC_ENABLE false
#endif
struct _cy_sdio_pin_and_name_config
{
const char *name;
cyhal_gpio_t cmd; /**< The pin connected to the command signal. */
cyhal_gpio_t clk; /**< The pin connected to the clock signal. */
cyhal_gpio_t data0; /**< The pin connected to the data0 signal. */
cyhal_gpio_t data1; /**< The pin connected to the data1 signal. */
cyhal_gpio_t data2; /**< The pin connected to the data2 signal. */
cyhal_gpio_t data3; /**< The pin connected to the data3 signal. */
cyhal_gpio_t data4; /**< The pin connected to the data4 signal; pass NC when unused. */
cyhal_gpio_t data5; /**< The pin connected to the data5 signal; pass NC when unused. */
cyhal_gpio_t data6; /**< The pin connected to the data6 signal; pass NC when unused. */
cyhal_gpio_t data7; /**< The pin connected to the data7 signal; pass NC when unused. */
cyhal_gpio_t card_detect; /**< The pin connected to the card detect signal. */
cyhal_gpio_t io_volt_sel; /**< The pin connected to the voltage select signal. */
cyhal_gpio_t card_if_pwr_en; /**< The pin connected to the card interface power enable signal. */
cyhal_gpio_t card_mech_write_prot; /**< The pin connected to the write protect signal. */
cyhal_gpio_t led_ctrl; /**< The pin connected to the LED control signal. */
cyhal_gpio_t card_emmc_reset; /**< The pin connected to the eMMC card reset signal. */
};
static const struct _cy_sdio_pin_and_name_config _sdcard_config =
{
.name = "sd0",
.cmd = BSP_USING_SDCARD_CMD_PIN,
.clk = BSP_USING_SDCARD_CLK_PIN,
.data0 = BSP_USING_SDCARD_DAT0_PIN,
.data1 = BSP_USING_SDCARD_DAT1_PIN,
.data2 = BSP_USING_SDCARD_DAT2_PIN,
.data3 = BSP_USING_SDCARD_DAT3_PIN,
.data4 = BSP_USING_SDCARD_DAT4_PIN,
.data5 = BSP_USING_SDCARD_DAT5_PIN,
.data6 = BSP_USING_SDCARD_DAT6_PIN,
.data7 = BSP_USING_SDCARD_DAT7_PIN,
.card_detect = BSP_USING_SDCARD_DETECT_PIN,
.io_volt_sel = BSP_USING_SDCARD_IO_VOLT_SEL_PIN,
.card_if_pwr_en = BSP_USING_SDCARD_CARD_IF_PWR_EN_PIN,
.card_mech_write_prot = BSP_USING_SDCARD_CARD_MECH_WRITE_PROT_PIN,
#if BSP_USING_SDCARD_LED_CTRL_PIN
.led_ctrl = BSP_USING_SDCARD_LED_CTRL_PIN,
#else
.led_ctrl = -1,
#endif
.card_emmc_reset = BSP_USING_SDCARD_CARD_EMMC_RESET_PIN,
};
#include <dfs_fs.h>
#include <drivers/dev_mmcsd_core.h>
#include <drivers/dev_gpt.h>
struct rthw_sdio
{
struct rt_device parent;
cyhal_sdhc_t sdhc_obj; /**< Object for use with the SDHC HAL driver. */
cyhal_sdhc_config_t sdhc_config; /**< Card configuration structure to be passed to the HAL driver. */
const struct _cy_sdio_pin_config *pins_cfg;
struct dfs_partition part;
struct rt_device_blk_geometry geometry;
};
static rt_err_t rt_mmcsd_init(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t rt_mmcsd_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t rt_mmcsd_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t rt_mmcsd_control(rt_device_t dev, int cmd, void *args)
{
struct rthw_sdio *sdio = (struct rthw_sdio *)dev;
struct dfs_partition *part = &sdio->part;
struct rt_device_blk_geometry *geometry = &sdio->geometry;
struct mmcsd_blk_device *blk_dev = (struct mmcsd_blk_device *)dev->user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_BLK_GETGEOME:
rt_memcpy(args, geometry, sizeof(struct rt_device_blk_geometry));
break;
case RT_DEVICE_CTRL_BLK_PARTITION:
rt_memcpy(args, part, sizeof(struct dfs_partition));
default:
break;
}
return RT_EOK;
}
static rt_ssize_t rt_mmcsd_read(rt_device_t dev,
rt_off_t pos,
void *buffer,
rt_size_t size)
{
rt_err_t err = 0;
void *rd_ptr = (void *)buffer;
struct rthw_sdio *sdio = (struct rthw_sdio *)dev;
cyhal_sdhc_t *hw_sdio = &sdio->sdhc_obj;
off_t offset = sdio->part.offset;
LOG_D("mmc read: off:%d pos:%d size:%d", offset, pos, size);
if (dev == RT_NULL)
{
rt_set_errno(-RT_EINVAL);
return 0;
}
rt_sem_take(sdio->part.lock, RT_WAITING_FOREVER);
do {
size_t block_count = size;
uint32_t addr = (offset + pos);
cy_rslt_t result = cyhal_sdhc_read_async(hw_sdio, addr, buffer, &block_count);
if(CY_RSLT_SUCCESS != result)
{
err = -RT_ERROR;
break;
}
/* Waits on a semaphore until the transfer completes, when RTOS_AWARE component is defined. */
result = cyhal_sdhc_wait_transfer_complete(hw_sdio);
if(CY_RSLT_SUCCESS != result)
{
err = -RT_ERROR;
break;
}
}while(0);
rt_sem_release(sdio->part.lock);
/* the length of reading must align to SECTOR SIZE */
if (err)
{
rt_set_errno(-RT_EIO);
return 0;
}
return size;
}
static rt_ssize_t rt_mmcsd_write(rt_device_t dev,
rt_off_t pos,
const void *buffer,
rt_size_t size)
{
rt_err_t err = 0;
void *rd_ptr = (void *)buffer;
struct rthw_sdio *sdio = (struct rthw_sdio *)dev;
cyhal_sdhc_t *hw_sdio = &sdio->sdhc_obj;
off_t offset = sdio->part.offset;
LOG_D("mmc write: off:%d pos:%d size:%d", offset, pos, size);
if (dev == RT_NULL)
{
rt_set_errno(-RT_EINVAL);
return 0;
}
rt_sem_take(sdio->part.lock, RT_WAITING_FOREVER);
do {
size_t block_count = size ;
uint32_t addr = (offset + pos);
cy_rslt_t result = cyhal_sdhc_write_async(hw_sdio, addr, buffer, &block_count);
if(CY_RSLT_SUCCESS != result)
{
err = -RT_ERROR;
break;
}
/* Waits on a semaphore until the transfer completes, when RTOS_AWARE component is defined. */
result = cyhal_sdhc_wait_transfer_complete(hw_sdio);
if(CY_RSLT_SUCCESS != result)
{
err = -RT_ERROR;
break;
}
}while(0);
rt_sem_release(sdio->part.lock);
/* the length of reading must align to SECTOR SIZE */
if (err)
{
rt_set_errno(-RT_EIO);
return 0;
}
return size;
}
#ifdef RT_USING_DEVICE_OPS
const static struct rt_device_ops mmcsd_blk_ops =
{
rt_mmcsd_init,
rt_mmcsd_open,
rt_mmcsd_close,
rt_mmcsd_read,
rt_mmcsd_write,
rt_mmcsd_control
};
#endif
int rt_hw_sdio_init(void)
{
struct rthw_sdio *sdio = RT_NULL;
struct _cy_sdio_pin_config *pins_cfg;
char sname[16];
sdio = rt_malloc(sizeof(struct rthw_sdio));
if (sdio == RT_NULL)
{
LOG_E("malloc rthw_sdio fail");
return RT_NULL;
}
rt_memset(sdio, 0, sizeof(struct rthw_sdio));
LOG_D("sdio pins: cmd=%d,clk=%d,d0=%d,d1=%d,d2=%d,d3=%d,d4=%d,d5=%d,d6=%d,d7=%d",
_sdio1_pins_and_name.cmd, _sdio1_pins_and_name.clk,
_sdio1_pins_and_name.data0, _sdio1_pins_and_name.data1, _sdio1_pins_and_name.data2, _sdio1_pins_and_name.data3,
_sdio1_pins_and_name.data4, _sdio1_pins_and_name.data5, _sdio1_pins_and_name.data6, _sdio1_pins_and_name.data7
);
LOG_D("\tdetect=%d,volt_sel=%d,pwr_en=%d,write_prot=%d,led_ctrl=%d,emmc_reset=%d",
_sdio1_pins_and_name.card_detect, _sdio1_pins_and_name.io_volt_sel, _sdio1_pins_and_name.card_if_pwr_en,
_sdio1_pins_and_name.card_mech_write_prot, _sdio1_pins_and_name.led_ctrl, _sdio1_pins_and_name.card_emmc_reset
);
/* register mmcsd device */
sdio->parent.type = RT_Device_Class_Block;
#ifdef RT_USING_DEVICE_OPS
sdio->parent.ops = &mmcsd_blk_ops;
#else
sdio->parent.init = rt_mmcsd_init;
sdio->parent.open = rt_mmcsd_open;
sdio->parent.close = rt_mmcsd_close;
sdio->parent.read = rt_mmcsd_read;
sdio->parent.write = rt_mmcsd_write;
sdio->parent.control = rt_mmcsd_control;
#endif
do {
sdio->sdhc_config.enableLedControl = SDCARD_LED_CTRL_ENABLE;
sdio->sdhc_config.isEmmc = SDCARD_EMMC_ENABLE;
sdio->sdhc_config.lowVoltageSignaling = false;
sdio->sdhc_config.busWidth = BSP_USING_SDCARD_BUS_WIDTH;
/* Initialize the SD Card interface. */
int rslt = cyhal_sdhc_init_hw(&sdio->sdhc_obj, &sdio->sdhc_config, _sdcard_config.cmd, _sdcard_config.clk,
_sdcard_config.data0, _sdcard_config.data1, _sdcard_config.data2, _sdcard_config.data3,
_sdcard_config.data4, _sdcard_config.data5, _sdcard_config.data6, _sdcard_config.data7,
_sdcard_config.card_detect, _sdcard_config.io_volt_sel, _sdcard_config.card_if_pwr_en,
_sdcard_config.card_mech_write_prot, _sdcard_config.led_ctrl, _sdcard_config.card_emmc_reset, RT_NULL);
if(rslt != CY_RSLT_SUCCESS)
{
LOG_E("sdhc hw init fail: (0x%x)", rslt);
break;
}
rslt = cyhal_sdhc_init_card(&sdio->sdhc_obj);
if(rslt != CY_RSLT_SUCCESS)
{
LOG_E("sdhc init fail: (0x%x)", rslt);
break;
}
rt_uint32_t block_count;
rslt = cyhal_sdhc_get_block_count(&sdio->sdhc_obj, &block_count);
if(rslt != CY_RSLT_SUCCESS)
{
LOG_E("get block count fail: (0x%x)", rslt);
break;
}
LOG_D("block count:%d(0x%x)", block_count, block_count);
sdio->geometry.bytes_per_sector = 512;
sdio->geometry.block_size = 512;
sdio->geometry.sector_count = block_count;
rt_snprintf(sname, sizeof(sname) - 1, "sem_%s%d", _sdcard_config.name, 0);
sdio->part.lock = rt_sem_create(sname, 1, RT_IPC_FLAG_FIFO);
if(sdio->part.lock == RT_NULL)
{
LOG_E("create part.lock fail");
break;
}
rt_uint8_t *sector = rt_malloc(512);
if(sector == RT_NULL)
{
LOG_E("malloc sector fail");
break;
}
if(rt_mmcsd_read(&sdio->parent, 0, sector, 1) < 0)
{
LOG_E("rt_mmcsd_read fail");
rt_free(sector);
break;
}
rslt = dfs_filesystem_get_partition(&sdio->part, sector, 0);
rt_free(sector);
if(rslt != RT_EOK)
{
LOG_E("partition not found!");
break;
}
rslt = rt_device_register(&(sdio->parent), _sdcard_config.name,
RT_DEVICE_FLAG_RDWR);
if(rslt != RT_EOK)
{
LOG_E("register device fail!");
break;
}
return RT_EOK;
}while(0);
if(sdio)
{
cyhal_sdhc_free(&sdio->sdhc_obj);
if(sdio->part.lock)
{
rt_sem_delete(sdio->part.lock);
}
rt_free(sdio);
}
return -RT_ERROR;
}
INIT_DEVICE_EXPORT(rt_hw_sdio_init);
#endif
View Git Blame Copy Permalink