libs/rt-thread-official
libs
/
rt-thread-official
mirror of https://github.com/RT-Thread/rt-thread.git
4
0
Fork 0
Code Issues Releases Wiki Activity
rt-thread-official/bsp/gd32303e-eval/drivers/drv_i2c.c

375 lines
9.2 KiB
C
Raw Blame History

/*
* Copyright (c) 2006-2021, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-06-05 tanek first implementation.
* 2018-04-19 misonyo Porting for gd32f30x
*/
#include "drv_i2c.h"
#include <rtthread.h>
#include "gd32f30x.h"
#ifdef RT_USING_I2C
#include <rtdevice.h>
#define DBG_TAG "drv.I2C"
#ifdef RT_I2C_DEBUG
#define DBG_LVL DBG_LOG
#else
#define DBG_LVL DBG_INFO
#endif
#include <rtdbg.h>
#ifdef RT_USING_I2C_BITOPS
/*user can change this*/
#define I2C_BUS_NAME "i2c2"
/*user should change this to adapt specific board*/
#define I2C_SCL_PIN GPIO_PIN_4
#define I2C_SCL_PORT GPIOE
#define I2C_SCL_CLK RCU_GPIOE
#define I2C_SDA_PIN GPIO_PIN_5
#define I2C_SDA_PORT GPIOE
#define I2C_SDA_CLK RCU_GPIOE
struct gd32_i2c_bit_data
{
struct
{
rcu_periph_enum clk;
rt_uint32_t port;
rt_uint32_t pin;
}scl, sda;
};
static void gpio_set_sda(void *data, rt_int32_t state)
{
struct gd32_i2c_bit_data* bd = data;
if (state)
{
gpio_bit_set(bd->sda.port, bd->sda.pin);
}
else
{
gpio_bit_reset(bd->sda.port, bd->sda.pin);
}
}
static void gpio_set_scl(void *data, rt_int32_t state)
{
struct gd32_i2c_bit_data* bd = data;
if (state)
{
gpio_bit_set(bd->scl.port, bd->scl.pin);
}
else
{
gpio_bit_reset(bd->scl.port, bd->scl.pin);
}
}
static rt_int32_t gpio_get_sda(void *data)
{
struct gd32_i2c_bit_data* bd = data;
return gpio_input_bit_get(bd->sda.port, bd->sda.pin);
}
static rt_int32_t gpio_get_scl(void *data)
{
struct gd32_i2c_bit_data* bd = data;
return gpio_input_bit_get(bd->scl.port, bd->scl.pin);
}
static void gpio_udelay(rt_uint32_t us)
{
int i = ( rcu_clock_freq_get(CK_SYS) / 4000000 * us);
while(i)
{
i--;
}
}
static void drv_i2c_gpio_init(const struct gd32_i2c_bit_data* bd)
{
rcu_periph_clock_enable(bd->sda.clk);
rcu_periph_clock_enable(bd->scl.clk);
gpio_init(bd->sda.port, GPIO_MODE_OUT_OD, GPIO_OSPEED_10MHZ, bd->sda.pin);
gpio_init(bd->scl.port, GPIO_MODE_OUT_OD, GPIO_OSPEED_10MHZ, bd->scl.pin);
gpio_bit_set(bd->sda.port, bd->sda.pin);
gpio_bit_set(bd->scl.port, bd->scl.pin);
}
#else /* use hardware i2c */
struct gd32_i2c_bus
{
struct rt_i2c_bus_device parent;
rt_uint32_t i2c_periph;
};
static int gd32_i2c_read(rt_uint32_t i2c_periph, rt_uint16_t slave_address, rt_uint8_t* p_buffer, rt_uint16_t data_byte)
{
/* wait until I2C bus is idle */
while(i2c_flag_get(i2c_periph, I2C_FLAG_I2CBSY));
/* send a start condition to I2C bus */
i2c_start_on_bus(i2c_periph);
/* wait until SBSEND bit is set */
while(!i2c_flag_get(i2c_periph, I2C_FLAG_SBSEND));
/* send slave address to I2C bus */
i2c_master_addressing(i2c_periph, slave_address<<1, I2C_RECEIVER);
/* wait until ADDSEND bit is set */
while(!i2c_flag_get(i2c_periph, I2C_FLAG_ADDSEND));
/* clear the ADDSEND bit */
i2c_flag_clear(i2c_periph,I2C_FLAG_ADDSEND);
if(1 == data_byte){
/* disable acknowledge */
i2c_ack_config(i2c_periph,I2C_ACK_DISABLE);
/* send a stop condition to I2C bus */
i2c_stop_on_bus(i2c_periph);
}
/* while there is data to be read */
while(data_byte)
{
/* wait until the RBNE bit is set and clear it */
if(i2c_flag_get(i2c_periph, I2C_FLAG_RBNE))
{
/* read a byte from the EEPROM */
*p_buffer = i2c_data_receive(i2c_periph);
/* point to the next location where the byte read will be saved */
p_buffer++;
/* decrement the read bytes counter */
data_byte--;
if(1 == data_byte)
{
/* disable acknowledge */
i2c_ack_config(i2c_periph,I2C_ACK_DISABLE);
/* send a stop condition to I2C bus */
i2c_stop_on_bus(i2c_periph);
}
}
}
/* wait until the stop condition is finished */
while(I2C_CTL0(i2c_periph)&0x0200);
/* enable acknowledge */
i2c_ack_config(i2c_periph,I2C_ACK_ENABLE);
i2c_ackpos_config(i2c_periph,I2C_ACKPOS_CURRENT);
return 0;
}
static int gd32_i2c_write(rt_uint32_t i2c_periph, uint16_t slave_address, uint8_t* p_buffer, uint16_t data_byte)
{
/* wait until I2C bus is idle */
while(i2c_flag_get(i2c_periph, I2C_FLAG_I2CBSY));
/* send a start condition to I2C bus */
i2c_start_on_bus(i2c_periph);
/* wait until SBSEND bit is set */
while(!i2c_flag_get(i2c_periph, I2C_FLAG_SBSEND));
/* send slave address to I2C bus */
i2c_master_addressing(i2c_periph, slave_address<<1, I2C_TRANSMITTER);
/* wait until ADDSEND bit is set */
while(!i2c_flag_get(i2c_periph, I2C_FLAG_ADDSEND));
/* clear the ADDSEND bit */
i2c_flag_clear(i2c_periph,I2C_FLAG_ADDSEND);
/* wait until the transmit data buffer is empty */
while(SET != i2c_flag_get( i2c_periph , I2C_FLAG_TBE));
/* while there is data to be read */
while(data_byte)
{
i2c_data_transmit(i2c_periph, *p_buffer);
/* point to the next byte to be written */
p_buffer++;
/* decrement the write bytes counter */
data_byte --;
/* wait until BTC bit is set */
while(!i2c_flag_get(i2c_periph, I2C_FLAG_BTC));
}
/* send a stop condition to I2C bus */
i2c_stop_on_bus(i2c_periph);
/* wait until the stop condition is finished */
while(I2C_CTL0(i2c_periph)&0x0200);
return 0;
}
static rt_ssize_t gd32_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num)
{
struct rt_i2c_msg *msg;
rt_uint32_t i;
rt_err_t ret = -RT_ERROR;
struct gd32_i2c_bus *gd32_i2c = (struct gd32_i2c_bus *)bus;
for (i = 0; i < num; i++)
{
msg = &msgs[i];
if (msg->flags & RT_I2C_ADDR_10BIT)
{
i2c_mode_addr_config(gd32_i2c->i2c_periph,I2C_I2CMODE_ENABLE,I2C_ADDFORMAT_10BITS,0);
}
else
{
i2c_mode_addr_config(gd32_i2c->i2c_periph,I2C_I2CMODE_ENABLE,I2C_ADDFORMAT_7BITS,0);
}
if (msg->flags & RT_I2C_RD)
{
if (gd32_i2c_read(gd32_i2c->i2c_periph, msg->addr, msg->buf, msg->len) != 0)
{
LOG_E("i2c bus write failed,i2c bus stop!");
goto out;
}
}
else
{
if (gd32_i2c_write(gd32_i2c->i2c_periph, msg->addr, msg->buf, msg->len) != 0)
{
LOG_E("i2c bus write failed,i2c bus stop!");
goto out;
}
}
}
ret = i;
out:
LOG_E("send stop condition\n");
return ret;
}
static const struct rt_i2c_bus_device_ops i2c_ops =
{
gd32_i2c_xfer,
RT_NULL,
RT_NULL
};
#endif /* RT_USING_I2C_BITOPS */
int rt_hw_i2c_init(void)
{
#ifdef RT_USING_I2C_BITOPS
{
static struct rt_i2c_bus_device i2c_device;
static const struct gd32_i2c_bit_data _i2c_bdata =
{
/* SCL */
{ I2C_SCL_CLK, I2C_SCL_PORT, I2C_SCL_PIN},
/* SDA */
{ I2C_SDA_CLK, I2C_SDA_PORT, I2C_SDA_PIN},
};
static const struct rt_i2c_bit_ops _i2c_bit_ops =
{
(void*)&_i2c_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
1,
100
};
drv_i2c_gpio_init(&_i2c_bdata);
i2c_device.priv = (void *)&_i2c_bit_ops;
rt_i2c_bit_add_bus(&i2c_device, I2C_BUS_NAME);
}
#else /* register hardware I2C */
#ifdef RT_USING_I2C0
#define I2C0_SPEED 100000
static struct gd32_i2c_bus gd32_i2c0;
/* enable GPIOB clock */
rcu_periph_clock_enable(RCU_GPIOB);
/* connect PB6 to I2C0_SCL, PB7 to I2C0_SDA */
gpio_init(GPIOB, GPIO_MODE_AF_OD, GPIO_OSPEED_50MHZ, GPIO_PIN_6 | GPIO_PIN_7);
/* enable I2C clock */
rcu_periph_clock_enable(RCU_I2C0);
/* configure I2C clock */
i2c_clock_config(I2C0,I2C0_SPEED,I2C_DTCY_2);
i2c_enable(I2C0);
/* enable acknowledge */
i2c_ack_config(I2C0,I2C_ACK_ENABLE);
rt_memset((void *)&gd32_i2c0, 0, sizeof(struct gd32_i2c_bus));
gd32_i2c0.parent.ops = &i2c_ops;
gd32_i2c0.i2c_periph = I2C0;
rt_i2c_bus_device_register(&gd32_i2c0.parent, "i2c0");
#endif
#ifdef RT_USING_I2C1
#define I2C1_SPEED 100000
static struct gd32_i2c_bus gd32_i2c1;
/* enable GPIOB clock */
rcu_periph_clock_enable(RCU_GPIOB);
/* connect PB10 to I2C1_SCL, PB11 to I2C1_SDA */
gpio_init(GPIOB, GPIO_MODE_AF_OD, GPIO_OSPEED_50MHZ, GPIO_PIN_10 | GPIO_PIN_11);
/* enable I2C clock */
rcu_periph_clock_enable(RCU_I2C1);
/* configure I2C clock */
i2c_clock_config(I2C1,I2C1_SPEED,I2C_DTCY_2);
i2c_enable(I2C1);
/* enable acknowledge */
i2c_ack_config(I2C1,I2C_ACK_ENABLE);
rt_memset((void *)&gd32_i2c1, 0, sizeof(struct gd32_i2c_bus));
gd32_i2c1.parent.ops = &i2c_ops;
gd32_i2c1.i2c_periph = I2C1;
rt_i2c_bus_device_register(&gd32_i2c1.parent, "i2c1");
#endif
#endif /* RT_USING_I2C_BITOPS */
return 0;
}
INIT_DEVICE_EXPORT(rt_hw_i2c_init);
#endif
/* end of i2c driver */
View Git Blame Copy Permalink