278 lines
15 KiB
C
278 lines
15 KiB
C
//*****************************************************************************
|
|
//
|
|
// hw_comp.h - Macros used when accessing the comparator hardware.
|
|
//
|
|
// Copyright (c) 2005-2009 Luminary Micro, Inc. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
|
|
// exclusively on LMI's microcontroller products.
|
|
//
|
|
// The software is owned by LMI and/or its suppliers, and is protected under
|
|
// applicable copyright laws. All rights are reserved. You may not combine
|
|
// this software with "viral" open-source software in order to form a larger
|
|
// program. Any use in violation of the foregoing restrictions may subject
|
|
// the user to criminal sanctions under applicable laws, as well as to civil
|
|
// liability for the breach of the terms and conditions of this license.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
|
|
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
|
|
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
|
|
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
|
|
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 4694 of the Stellaris Firmware Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __HW_COMP_H__
|
|
#define __HW_COMP_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the comparator register offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_O_ACMIS 0x00000000 // Analog Comparator Masked
|
|
// Interrupt Status
|
|
#define COMP_O_ACRIS 0x00000004 // Analog Comparator Raw Interrupt
|
|
// Status
|
|
#define COMP_O_ACINTEN 0x00000008 // Analog Comparator Interrupt
|
|
// Enable
|
|
#define COMP_O_ACREFCTL 0x00000010 // Analog Comparator Reference
|
|
// Voltage Control
|
|
#define COMP_O_ACSTAT0 0x00000020 // Comp0 status register
|
|
#define COMP_O_ACCTL0 0x00000024 // Comp0 control register
|
|
#define COMP_O_ACSTAT1 0x00000040 // Comp1 status register
|
|
#define COMP_O_ACCTL1 0x00000044 // Comp1 control register
|
|
#define COMP_O_ACSTAT2 0x00000060 // Comp2 status register
|
|
#define COMP_O_ACCTL2 0x00000064 // Comp2 control register
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACMIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACMIS_IN2 0x00000004 // Comparator 2 Masked Interrupt
|
|
// Status.
|
|
#define COMP_ACMIS_IN1 0x00000002 // Comparator 1 Masked Interrupt
|
|
// Status.
|
|
#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt
|
|
// Status.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACRIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACRIS_IN2 0x00000004 // Comparator 2 Interrupt Status.
|
|
#define COMP_ACRIS_IN1 0x00000002 // Comparator 1 Interrupt Status.
|
|
#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACINTEN register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACINTEN_IN2 0x00000004 // Comparator 2 Interrupt Enable.
|
|
#define COMP_ACINTEN_IN1 0x00000002 // Comparator 1 Interrupt Enable.
|
|
#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACREFCTL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable.
|
|
#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range.
|
|
#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref.
|
|
#define COMP_ACREFCTL_VREF_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACSTAT0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACCTL0 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable.
|
|
#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive.
|
|
#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value
|
|
#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+
|
|
#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference
|
|
#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value.
|
|
#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense.
|
|
#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
|
|
#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge
|
|
#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge
|
|
#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge
|
|
#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value.
|
|
#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense.
|
|
#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
|
|
#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge
|
|
#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge
|
|
#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge
|
|
#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACSTAT1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACSTAT1_OVAL 0x00000002 // Comparator Output Value.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACCTL1 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACCTL1_TOEN 0x00000800 // Trigger Output Enable.
|
|
#define COMP_ACCTL1_ASRCP_M 0x00000600 // Analog Source Positive.
|
|
#define COMP_ACCTL1_ASRCP_PIN 0x00000000 // Pin value
|
|
#define COMP_ACCTL1_ASRCP_PIN0 0x00000200 // Pin value of C0+
|
|
#define COMP_ACCTL1_ASRCP_REF 0x00000400 // Internal voltage reference
|
|
#define COMP_ACCTL1_TSLVAL 0x00000080 // Trigger Sense Level Value.
|
|
#define COMP_ACCTL1_TSEN_M 0x00000060 // Trigger Sense.
|
|
#define COMP_ACCTL1_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
|
|
#define COMP_ACCTL1_TSEN_FALL 0x00000020 // Falling edge
|
|
#define COMP_ACCTL1_TSEN_RISE 0x00000040 // Rising edge
|
|
#define COMP_ACCTL1_TSEN_BOTH 0x00000060 // Either edge
|
|
#define COMP_ACCTL1_ISLVAL 0x00000010 // Interrupt Sense Level Value.
|
|
#define COMP_ACCTL1_ISEN_M 0x0000000C // Interrupt Sense.
|
|
#define COMP_ACCTL1_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
|
|
#define COMP_ACCTL1_ISEN_FALL 0x00000004 // Falling edge
|
|
#define COMP_ACCTL1_ISEN_RISE 0x00000008 // Rising edge
|
|
#define COMP_ACCTL1_ISEN_BOTH 0x0000000C // Either edge
|
|
#define COMP_ACCTL1_CINV 0x00000002 // Comparator Output Invert.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACSTAT2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACSTAT2_OVAL 0x00000002 // Comparator Output Value.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the COMP_O_ACCTL2 register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACCTL2_TOEN 0x00000800 // Trigger Output Enable.
|
|
#define COMP_ACCTL2_ASRCP_M 0x00000600 // Analog Source Positive.
|
|
#define COMP_ACCTL2_ASRCP_PIN 0x00000000 // Pin value
|
|
#define COMP_ACCTL2_ASRCP_PIN0 0x00000200 // Pin value of C0+
|
|
#define COMP_ACCTL2_ASRCP_REF 0x00000400 // Internal voltage reference
|
|
#define COMP_ACCTL2_TSLVAL 0x00000080 // Trigger Sense Level Value.
|
|
#define COMP_ACCTL2_TSEN_M 0x00000060 // Trigger Sense.
|
|
#define COMP_ACCTL2_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
|
|
#define COMP_ACCTL2_TSEN_FALL 0x00000020 // Falling edge
|
|
#define COMP_ACCTL2_TSEN_RISE 0x00000040 // Rising edge
|
|
#define COMP_ACCTL2_TSEN_BOTH 0x00000060 // Either edge
|
|
#define COMP_ACCTL2_ISLVAL 0x00000010 // Interrupt Sense Level Value.
|
|
#define COMP_ACCTL2_ISEN_M 0x0000000C // Interrupt Sense.
|
|
#define COMP_ACCTL2_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
|
|
#define COMP_ACCTL2_ISEN_FALL 0x00000004 // Falling edge
|
|
#define COMP_ACCTL2_ISEN_RISE 0x00000008 // Rising edge
|
|
#define COMP_ACCTL2_ISEN_BOTH 0x0000000C // Either edge
|
|
#define COMP_ACCTL2_CINV 0x00000002 // Comparator Output Invert.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following definitions are deprecated.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef DEPRECATED
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the comparator register offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_O_MIS 0x00000000 // Interrupt status register
|
|
#define COMP_O_RIS 0x00000004 // Raw interrupt status register
|
|
#define COMP_O_INTEN 0x00000008 // Interrupt enable register
|
|
#define COMP_O_REFCTL 0x00000010 // Reference voltage control reg.
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the COMP_MIS,
|
|
// COMP_RIS, and COMP_INTEN registers.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_INT_2 0x00000004 // Comp2 interrupt
|
|
#define COMP_INT_1 0x00000002 // Comp1 interrupt
|
|
#define COMP_INT_0 0x00000001 // Comp0 interrupt
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the COMP_REFCTL
|
|
// register.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_REFCTL_EN 0x00000200 // Reference voltage enable
|
|
#define COMP_REFCTL_RNG 0x00000100 // Reference voltage range
|
|
#define COMP_REFCTL_VREF_MASK 0x0000000F // Reference voltage select mask
|
|
#define COMP_REFCTL_VREF_SHIFT 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the COMP_ACSTAT0,
|
|
// COMP_ACSTAT1, and COMP_ACSTAT2 registers.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACSTAT_OVAL 0x00000002 // Comparator output value
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the bit fields in the COMP_ACCTL0,
|
|
// COMP_ACCTL1, and COMP_ACCTL2 registers.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_ACCTL_TMASK 0x00000800 // Trigger enable
|
|
#define COMP_ACCTL_ASRCP_MASK 0x00000600 // Vin+ source select mask
|
|
#define COMP_ACCTL_ASRCP_PIN 0x00000000 // Dedicated Comp+ pin
|
|
#define COMP_ACCTL_ASRCP_PIN0 0x00000200 // Comp0+ pin
|
|
#define COMP_ACCTL_ASRCP_REF 0x00000400 // Internal voltage reference
|
|
#define COMP_ACCTL_ASRCP_RES 0x00000600 // Reserved
|
|
#define COMP_ACCTL_OEN 0x00000100 // Comparator output enable
|
|
#define COMP_ACCTL_TSVAL 0x00000080 // Trigger polarity select
|
|
#define COMP_ACCTL_TSEN_MASK 0x00000060 // Trigger sense mask
|
|
#define COMP_ACCTL_TSEN_LEVEL 0x00000000 // Trigger is level sense
|
|
#define COMP_ACCTL_TSEN_FALL 0x00000020 // Trigger is falling edge
|
|
#define COMP_ACCTL_TSEN_RISE 0x00000040 // Trigger is rising edge
|
|
#define COMP_ACCTL_TSEN_BOTH 0x00000060 // Trigger is both edges
|
|
#define COMP_ACCTL_ISLVAL 0x00000010 // Interrupt polarity select
|
|
#define COMP_ACCTL_ISEN_MASK 0x0000000C // Interrupt sense mask
|
|
#define COMP_ACCTL_ISEN_LEVEL 0x00000000 // Interrupt is level sense
|
|
#define COMP_ACCTL_ISEN_FALL 0x00000004 // Interrupt is falling edge
|
|
#define COMP_ACCTL_ISEN_RISE 0x00000008 // Interrupt is rising edge
|
|
#define COMP_ACCTL_ISEN_BOTH 0x0000000C // Interrupt is both edges
|
|
#define COMP_ACCTL_CINV 0x00000002 // Comparator output invert
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are deprecated defines for the reset values for the comparator
|
|
// registers.
|
|
//
|
|
//*****************************************************************************
|
|
#define COMP_RV_ACCTL1 0x00000000 // Comp1 control register
|
|
#define COMP_RV_ACSTAT2 0x00000000 // Comp2 status register
|
|
#define COMP_RV_ACSTAT0 0x00000000 // Comp0 status register
|
|
#define COMP_RV_RIS 0x00000000 // Raw interrupt status register
|
|
#define COMP_RV_INTEN 0x00000000 // Interrupt enable register
|
|
#define COMP_RV_ACCTL2 0x00000000 // Comp2 control register
|
|
#define COMP_RV_MIS 0x00000000 // Interrupt status register
|
|
#define COMP_RV_ACCTL0 0x00000000 // Comp0 control register
|
|
#define COMP_RV_ACSTAT1 0x00000000 // Comp1 status register
|
|
#define COMP_RV_REFCTL 0x00000000 // Reference voltage control reg.
|
|
|
|
#endif
|
|
|
|
#endif // __HW_COMP_H__
|