rt-thread-official/bsp/stm32/stm32f072-st-nucleo

STM32F072-Nucleo BSP Introduction

中文

MCU: STM32F072RB @48MHz, 128KB FLASH, 16KB RAM

The STM32F072x8/xB microcontrollers incorporate the high-performance ARM®Cortex®-M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 128 Kbytes of Flash memory and 16 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I2Cs, two SPI/I2S, one HDMI CEC and four USARTs), one USB Full-speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer and an advanced-control PWM timer.

The STM32F072x8/xB microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. The STM32F072x8/xB microcontrollers include devices in seven different packages ranging from 48 pins to 100 pins with a die form also available upon request. Depending on the device chosen, different sets of peripherals are included. These features make the STM32F072x8/xB microcontrollers suitable for a wide range of applications such as application control and user interfaces, hand-held equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms and HVACs.

KEY FEATURES

• Core: ARM®32-bit Cortex®-M0 CPU, frequency up to 48 MHz

• Memories

  • 64 to 128 Kbytes of Flash memory
  • 16 Kbytes of SRAM with HW parity

• CRC calculation unit

• Reset and power management

  • Digital and I/O supply: VDD= 2.0 V to 3.6 V
  • Analog supply: VDDA= VDDto 3.6 V
  • Selected I/Os: VDDIO2= 1.65 V to 3.6 V
  • Power-on/Power down reset (POR/PDR)
  • Programmable voltage detector (PVD)
  • Low power modes: Sleep, Stop, Standby
  • VBATsupply for RTC and backup registers

• Clock management

  • 4 to 32 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • Internal 8 MHz RC with x6 PLL option
  • Internal 40 kHz RC oscillator
  • Internal 48 MHz oscillator with automatic trimming based on ext. synchronization

• Up to 87 fast I/Os

  • All mappable on external interrupt vectors
  • Up to 68 I/Os with 5V tolerant capability and 19 with independent supply VDDIO2

• Seven-channel DMA controller

• One 12-bit, 1.0 μs ADC (up to 16 channels)

  • Conversion range: 0 to 3.6 V
  • Separate analog supply: 2.4 V to 3.6 V

• One 12-bit D/A converter (with 2 channels)

• Two fast low-power analog comparators with programmable input and output

• Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors

• Calendar RTC with alarm and periodic wakeup from Stop/Standby

• 12 timers

  • One 16-bit advanced-control timer for six-channel PWM output
  • One 32-bit and seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding or DAC control
  • Independent and system watchdog timers
  • SysTick timer

• Communication interfaces

  • Two I2C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, one supporting SMBus/PMBus and wakeup
  • Four USARTs supporting master synchronous SPI and modem control, two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature
  • Two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, and with I2S interface multiplexed
  • CAN interface
  • USB 2.0 full-speed interface, able to run from internal 48 MHz oscillator and with BCD and LPM support

• HDMI CEC wakeup on header reception

• Serial wire debug (SWD)

• 96-bit unique ID

• All packages ECOPACK®2

Read more

Documents	Description
STM32_Nucleo-64_BSP_Introduction	How to run RT-Thread on STM32 Nucleo-64 boards (Must-Read)
STM32F072RB ST Official Website	STM32F072RB datasheet and other resources

Maintained By

刘恒

iuzxhl@qq.com

Translated By

Meco Man @ RT-Thread Community

jiantingman@foxmail.com

https://github.com/mysterywolf