878 lines
40 KiB
C
878 lines
40 KiB
C
/**************************************************************************//**
|
|
* @file timer.h
|
|
* @version V3.00
|
|
* @brief Timer PWM Controller(Timer PWM) driver header file
|
|
*
|
|
* @copyright SPDX-License-Identifier: Apache-2.0
|
|
* @copyright Copyright (C) 2020 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
#ifndef __NU_TIMER_PWM_H__
|
|
#define __NU_TIMER_PWM_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
/** @addtogroup Standard_Driver Standard Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup TIMER_PWM_Driver TIMER PWM Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup TIMER_PWM_EXPORTED_CONSTANTS TIMER PWM Exported Constants
|
|
@{
|
|
*/
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Output Channel Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_CH0 (BIT0) /*!< Indicate PWMx_CH0 \hideinitializer */
|
|
#define TPWM_CH1 (BIT1) /*!< Indicate PWMx_CH1 \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Counter Type Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_UP_COUNT (0UL << TIMER_PWMCTL_CNTTYPE_Pos) /*!< Up count type \hideinitializer */
|
|
#define TPWM_DOWN_COUNT (1UL << TIMER_PWMCTL_CNTTYPE_Pos) /*!< Down count type \hideinitializer */
|
|
#define TPWM_UP_DOWN_COUNT (2UL << TIMER_PWMCTL_CNTTYPE_Pos) /*!< Up-Down count type \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Counter Mode Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_AUTO_RELOAD_MODE (0UL) /*!< Auto-reload mode \hideinitializer */
|
|
#define TPWM_ONE_SHOT_MODE (TIMER_PWMCTL_CNTMODE_Msk) /*!< One-shot mode \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Output Level Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_OUTPUT_TOGGLE (0UL) /*!< Timer PWM output toggle \hideinitializer */
|
|
#define TPWM_OUTPUT_NOTHING (1UL) /*!< Timer PWM output nothing \hideinitializer */
|
|
#define TPWM_OUTPUT_LOW (2UL) /*!< Timer PWM output low \hideinitializer */
|
|
#define TPWM_OUTPUT_HIGH (3UL) /*!< Timer PWM output high \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Trigger Event Source Select Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_TRIGGER_EVENT_AT_ZERO_POINT (0UL << TIMER_PWMTRGCTL_TRGSEL_Pos) /*!< Timer PWM trigger event while counter zero point event occurred \hideinitializer */
|
|
#define TPWM_TRIGGER_EVENT_AT_PERIOD_POINT (1UL << TIMER_PWMTRGCTL_TRGSEL_Pos) /*!< Timer PWM trigger event while counter period point event occurred \hideinitializer */
|
|
#define TPWM_TRIGGER_EVENT_AT_ZERO_OR_PERIOD_POINT (2UL << TIMER_PWMTRGCTL_TRGSEL_Pos) /*!< Timer PWM trigger event while counter zero or period point event occurred \hideinitializer */
|
|
#define TPWM_TRIGGER_EVENT_AT_COMPARE_UP_POINT (3UL << TIMER_PWMTRGCTL_TRGSEL_Pos) /*!< Timer PWM trigger event while counter up count compare point event occurred \hideinitializer */
|
|
#define TPWM_TRIGGER_EVENT_AT_COMPARE_DOWN_POINT (4UL << TIMER_PWMTRGCTL_TRGSEL_Pos) /*!< Timer PWM trigger event while counter down count compare point event occurred \hideinitializer */
|
|
#define TPWM_TRIGGER_EVENT_AT_PERIOD_OR_COMPARE_UP_POINT (5UL << TIMER_PWMTRGCTL_TRGSEL_Pos) /*!< Timer PWM trigger event while counter period or up count compare point event occurred \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Brake Control Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_BRAKE_SOURCE_EDGE_ACMP0 (TIMER_PWMBRKCTL_CPO0EBEN_Msk) /*!< Comparator 0 as edge-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_EDGE_ACMP1 (TIMER_PWMBRKCTL_CPO1EBEN_Msk) /*!< Comparator 1 as edge-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_EDGE_BKPIN (TIMER_PWMBRKCTL_BRKPEEN_Msk) /*!< Brake pin as edge-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_EDGE_SYS_CSS (TIMER_PWMBRKCTL_SYSEBEN_Msk | (TIMER_PWMFAILBRK_CSSBRKEN_Msk << 16)) /*!< System fail condition: clock security system detection as edge-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_EDGE_SYS_BOD (TIMER_PWMBRKCTL_SYSEBEN_Msk | (TIMER_PWMFAILBRK_BODBRKEN_Msk << 16)) /*!< System fail condition: brown-out detection as edge-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_EDGE_SYS_COR (TIMER_PWMBRKCTL_SYSEBEN_Msk | (TIMER_PWMFAILBRK_CORBRKEN_Msk << 16)) /*!< System fail condition: core lockup detection as edge-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_EDGE_SYS_RAM (TIMER_PWMBRKCTL_SYSEBEN_Msk | (TIMER_PWMFAILBRK_RAMBRKEN_Msk << 16)) /*!< System fail condition: SRAM parity error detection as edge-detect fault brake source \hideinitializer */
|
|
|
|
#define TPWM_BRAKE_SOURCE_LEVEL_ACMP0 (TIMER_PWMBRKCTL_CPO0LBEN_Msk) /*!< Comparator 0 as level-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_LEVEL_ACMP1 (TIMER_PWMBRKCTL_CPO1LBEN_Msk) /*!< Comparator 1 as level-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_LEVEL_BKPIN (TIMER_PWMBRKCTL_BRKPLEN_Msk) /*!< Brake pin as level-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_LEVEL_SYS_CSS (TIMER_PWMBRKCTL_SYSLBEN_Msk | (TIMER_PWMFAILBRK_CSSBRKEN_Msk << 16)) /*!< System fail condition: clock security system detection as level-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_LEVEL_SYS_BOD (TIMER_PWMBRKCTL_SYSLBEN_Msk | (TIMER_PWMFAILBRK_BODBRKEN_Msk << 16)) /*!< System fail condition: brown-out detection as level-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_LEVEL_SYS_COR (TIMER_PWMBRKCTL_SYSLBEN_Msk | (TIMER_PWMFAILBRK_CORBRKEN_Msk << 16)) /*!< System fail condition: core lockup detection as level-detect fault brake source \hideinitializer */
|
|
#define TPWM_BRAKE_SOURCE_LEVEL_SYS_RAM (TIMER_PWMBRKCTL_SYSLBEN_Msk | (TIMER_PWMFAILBRK_RAMBRKEN_Msk << 16)) /*!< System fail condition: SRAM parity error detection as level-detect fault brake source \hideinitializer */
|
|
|
|
#define TPWM_BRAKE_EDGE (TIMER_PWMSWBRK_BRKETRG_Msk) /*!< Edge-detect fault brake \hideinitializer */
|
|
#define TPWM_BRAKE_LEVEL (TIMER_PWMSWBRK_BRKLTRG_Msk) /*!< Level-detect fault brake \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Load Mode Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_LOAD_MODE_PERIOD (0UL) /*!< Timer PWM period load mode \hideinitializer */
|
|
#define TPWM_LOAD_MODE_IMMEDIATE (TIMER_PWMCTL_IMMLDEN_Msk) /*!< Timer PWM immediately load mode \hideinitializer */
|
|
#define TPWM_LOAD_MODE_CENTER (TIMER_PWMCTL_CTRLD_Msk) /*!< Timer PWM center load mode \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Brake Pin De-bounce Clock Source Select Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_BKP_DBCLK_PCLK_DIV_1 (0UL) /*!< De-bounce clock is PCLK divide by 1 \hideinitializer */
|
|
#define TPWM_BKP_DBCLK_PCLK_DIV_2 (1UL) /*!< De-bounce clock is PCLK divide by 2 \hideinitializer */
|
|
#define TPWM_BKP_DBCLK_PCLK_DIV_4 (2UL) /*!< De-bounce clock is PCLK divide by 4 \hideinitializer */
|
|
#define TPWM_BKP_DBCLK_PCLK_DIV_8 (3UL) /*!< De-bounce clock is PCLK divide by 8 \hideinitializer */
|
|
#define TPWM_BKP_DBCLK_PCLK_DIV_16 (4UL) /*!< De-bounce clock is PCLK divide by 16 \hideinitializer */
|
|
#define TPWM_BKP_DBCLK_PCLK_DIV_32 (5UL) /*!< De-bounce clock is PCLK divide by 32 \hideinitializer */
|
|
#define TPWM_BKP_DBCLK_PCLK_DIV_64 (6UL) /*!< De-bounce clock is PCLK divide by 64 \hideinitializer */
|
|
#define TPWM_BKP_DBCLK_PCLK_DIV_128 (7UL) /*!< De-bounce clock is PCLK divide by 128 \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Brake Pin Source Select Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_TM_BRAKE0 (0UL) /*!< Brake pin source comes from TM_BRAKE0 \hideinitializer */
|
|
#define TPWM_TM_BRAKE1 (1UL) /*!< Brake pin source comes from TM_BRAKE1 \hideinitializer */
|
|
#define TPWM_TM_BRAKE2 (2UL) /*!< Brake pin source comes from TM_BRAKE2 \hideinitializer */
|
|
#define TPWM_TM_BRAKE3 (3UL) /*!< Brake pin source comes from TM_BRAKE3 \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Counter Clock Source Select Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_CNTR_CLKSRC_TMR_CLK (0UL) /*!< Timer PWM Clock source selects to TMR_CLK \hideinitializer */
|
|
#define TPWM_CNTR_CLKSRC_TIMER0_INT (1UL) /*!< Timer PWM Clock source selects to TIMER0 interrupt event \hideinitializer */
|
|
#define TPWM_CNTR_CLKSRC_TIMER1_INT (2UL) /*!< Timer PWM Clock source selects to TIMER1 interrupt event \hideinitializer */
|
|
#define TPWM_CNTR_CLKSRC_TIMER2_INT (3UL) /*!< Timer PWM Clock source selects to TIMER2 interrupt event \hideinitializer */
|
|
#define TPWM_CNTR_CLKSRC_TIMER3_INT (4UL) /*!< Timer PWM Clock source selects to TIMER3 interrupt event \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Counter Synchronous Mode Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define TPWM_CNTR_SYNC_DISABLE (0UL) /*!< Disable TIMER PWM synchronous function \hideinitializer */
|
|
#define TPWM_CNTR_SYNC_START_BY_TIMER0 ((0<<TIMER_PWMSCTL_SYNCSRC_Pos) | (1<<TIMER_PWMSCTL_SYNCMODE_Pos)) /*!< PWM counter synchronous start by TIMER0 PWM \hideinitializer */
|
|
#define TPWM_CNTR_SYNC_CLEAR_BY_TIMER0 ((0<<TIMER_PWMSCTL_SYNCSRC_Pos) | (3<<TIMER_PWMSCTL_SYNCMODE_Pos)) /*!< PWM counter synchronous clear by TIMER0 PWM \hideinitializer */
|
|
#define TPWM_CNTR_SYNC_START_BY_TIMER2 ((1<<TIMER_PWMSCTL_SYNCSRC_Pos) | (1<<TIMER_PWMSCTL_SYNCMODE_Pos)) /*!< PWM counter synchronous start by TIMER2 PWM \hideinitializer */
|
|
#define TPWM_CNTR_SYNC_CLEAR_BY_TIMER2 ((1<<TIMER_PWMSCTL_SYNCSRC_Pos) | (3<<TIMER_PWMSCTL_SYNCMODE_Pos)) /*!< PWM counter synchronous clear by TIMER2 PWM \hideinitializer */
|
|
|
|
/**@}*/ /* end of group TIMER_PWM_EXPORTED_CONSTANTS */
|
|
|
|
|
|
/** @addtogroup TIMER_PWM_EXPORTED_FUNCTIONS TIMER PWM Exported Functions
|
|
@{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable PWM Counter Mode
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable specified Timer channel as PWM counter mode, then timer counter mode is invalid.
|
|
* @note All registers about time counter function will be cleared to 0 and timer clock source will be changed to PCLKx automatically after executing this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_PWM_MODE(timer) \
|
|
do{ \
|
|
if(((uint32_t)&((timer)->PWMCTL) & TMR45_BASE) == TMR45_BASE) { \
|
|
(timer)->CTL |= TIMER_CTL_FUNCSEL_Msk; \
|
|
while(((timer)->CTL & TIMER_CTL_FUNCSEL_Msk) == 0) {} \
|
|
} else { \
|
|
(timer)->ALTCTL = TIMER_ALTCTL_FUNCSEL_Msk; \
|
|
while(((timer)->ALTCTL & TIMER_ALTCTL_FUNCSEL_Msk) == 0) {} \
|
|
} \
|
|
}while(0)
|
|
|
|
/**
|
|
* @brief Disable PWM Counter Mode
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to disable specified Timer channel as PWM counter mode, then timer counter mode is available.
|
|
* @note All registers about PWM counter function will be cleared to 0 after executing this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_DISABLE_PWM_MODE(timer) \
|
|
do{ \
|
|
if(((uint32_t)&((timer)->PWMCTL) & TMR45_BASE) == TMR45_BASE) { \
|
|
(timer)->CTL &= ~TIMER_CTL_FUNCSEL_Msk; \
|
|
while(((timer)->CTL & TIMER_CTL_FUNCSEL_Msk) == TIMER_CTL_FUNCSEL_Msk) {} \
|
|
} else { \
|
|
(timer)->ALTCTL &= ~TIMER_ALTCTL_FUNCSEL_Msk; \
|
|
while(((timer)->ALTCTL & TIMER_ALTCTL_FUNCSEL_Msk) == TIMER_ALTCTL_FUNCSEL_Msk) {} \
|
|
} \
|
|
}while(0)
|
|
|
|
|
|
/**
|
|
* @brief Enable Independent Mode
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable independent mode of TIMER PWM module and complementary mode will be disabled.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_INDEPENDENT_MODE(timer) ((timer)->PWMCTL &= ~(1ul << TIMER_PWMCTL_OUTMODE_Pos))
|
|
|
|
/**
|
|
* @brief Enable Complementary Mode
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable complementary mode of Timer PWM module and independent mode will be disabled.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_COMPLEMENTARY_MODE(timer) ((timer)->PWMCTL |= (1 << TIMER_PWMCTL_OUTMODE_Pos))
|
|
|
|
/**
|
|
* @brief Set Counter Type
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
* @param[in] type Timer PWM count type, could be one of the following type
|
|
* - \ref TPWM_UP_COUNT
|
|
* - \ref TPWM_DOWN_COUNT
|
|
* - \ref TPWM_UP_DOWN_COUNT
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set Timer PWM counter type.
|
|
* @note NOT available on TIMER4 and TIMER5. Both TIMER4 and TIMER5 are only support count up.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_COUNTER_TYPE(timer, type) ((timer)->PWMCTL = ((timer)->PWMCTL & ~TIMER_PWMCTL_CNTTYPE_Msk) | (type))
|
|
|
|
/**
|
|
* @brief Start PWM Counter
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable PWM generator and start counter counting.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_START_COUNTER(timer) ((timer)->PWMCTL |= TIMER_PWMCTL_CNTEN_Msk)
|
|
|
|
/**
|
|
* @brief Stop PWM Counter
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to stop PWM counter after current period is completed.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_STOP_COUNTER(timer) ((timer)->PWMPERIOD = 0x0)
|
|
|
|
/**
|
|
* @brief Set Counter Clock Prescaler
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @param[in] prescaler Clock prescaler of specified channel.
|
|
* Valid values are between 0x0~0xFFF for TIMER0, TIMER1, TIMER2, TIMER3, and
|
|
* valid values are between 0x0~0xFF for TIMER4 and TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set the prescaler of specified TIMER PWM.
|
|
* @note If prescaler is 0, then there is no scaling in counter clock source.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_PRESCALER(timer, prescaler) ((timer)->PWMCLKPSC = (prescaler))
|
|
|
|
/**
|
|
* @brief Get Counter Clock Prescaler
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return Target prescaler setting, CLKPSC (TIMERx_PWMCLKPSC[11:0])
|
|
*
|
|
* @details Get the prescaler setting, the target counter clock divider is (CLKPSC + 1).
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_PRESCALER(timer) ((timer)->PWMCLKPSC)
|
|
|
|
/**
|
|
* @brief Set Couner Period
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @param[in] period Period of specified channel. Valid values are between 0x0~0xFFFF.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set the period of specified TIMER PWM.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_PERIOD(timer, period) ((timer)->PWMPERIOD = (period))
|
|
|
|
/**
|
|
* @brief Get Couner Period
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return Target period setting, PERIOD (TIMERx_PWMPERIOD[15:0])
|
|
*
|
|
* @details This macro is used to get the period of specified TIMER PWM.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_PERIOD(timer) ((timer)->PWMPERIOD)
|
|
|
|
/**
|
|
* @brief Set Comparator Value
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @param[in] cmp Comparator of specified channel. Valid values are between 0x0~0xFFFF.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set the comparator value of specified TIMER PWM.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_CMPDAT(timer, cmp) ((timer)->PWMCMPDAT = (cmp))
|
|
|
|
/**
|
|
* @brief Get Comparator Value
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return Target comparator setting, CMPDAT (TIMERx_PWMCMPDAT[15:0])
|
|
*
|
|
* @details This macro is used to get the comparator value of specified TIMER PWM.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_CMPDAT(timer) ((timer)->PWMCMPDAT)
|
|
|
|
/**
|
|
* @brief Clear Counter
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to clear counter of specified TIMER PWM.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_COUNTER(timer) ((timer)->PWMCNTCLR = TIMER_PWMCNTCLR_CNTCLR_Msk)
|
|
|
|
/**
|
|
* @brief Software Trigger Brake Event
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @param[in] type Type of brake trigger. Valid values are:
|
|
* - \ref TPWM_BRAKE_EDGE
|
|
* - \ref TPWM_BRAKE_LEVEL
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to trigger brake event by writing PWMSWBRK register.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SW_TRIGGER_BRAKE(timer, type) ((timer)->PWMSWBRK = (type))
|
|
|
|
/**
|
|
* @brief Enable Output Function
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @param[in] ch Enable specified channel output function. Valid values are:
|
|
* For TIMER0 ~ TIMER3, the valid value could be a combination of \ref TPWM_CH0 and \ref TPWM_CH1.
|
|
* For TIMER4, TIMER5, the valid value could be \ref TPWM_CH0 or \ref TPWM_CH1.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable output function of specified output pins.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_OUTPUT(timer, ch) \
|
|
do{ \
|
|
if(((uint32_t)&((timer)->PWMCTL) & TMR45_BASE) == TMR45_BASE) { \
|
|
if((ch) == BIT0) \
|
|
(timer)->PWMPOEN = BIT0; \
|
|
else \
|
|
(timer)->PWMPOEN = (BIT0 | BIT8); \
|
|
} else { \
|
|
(timer)->PWMPOEN = (ch); \
|
|
} \
|
|
}while(0)
|
|
|
|
/**
|
|
* @brief Set Output Inverse
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @param[in] ch Set specified channel output is inversed or not.
|
|
* For TIMER0 ~ TIMER3, the valid value could be a combination of \ref TPWM_CH0 and \ref TPWM_CH1.
|
|
* But this parameter is no effect on TIMER4 and TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable output inverse of specified output pins.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_OUTPUT_INVERSE(timer, ch) \
|
|
do{ \
|
|
if(((uint32_t)&((timer)->PWMCTL) & TMR45_BASE) == TMR45_BASE) { \
|
|
(timer)->PWMPOLCTL = BIT0; \
|
|
} else { \
|
|
(timer)->PWMPOLCTL = (ch); \
|
|
} \
|
|
}while(0)
|
|
|
|
/**
|
|
* @brief Enable Output Mask Function
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @param[in] ch Enable specified channel output mask function. Valid value could be a combination of \ref TPWM_CH0 and \ref TPWM_CH1.
|
|
*
|
|
* @param[in] level Output to high or low on specified mask channel.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable output mask function of specified output pins.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_MASK_OUTPUT(timer, ch, level) do {(timer)->PWMMSKEN = (ch); (timer)->PWMMSK = (level); }while(0)
|
|
|
|
/**
|
|
* @brief Set Counter Synchronous Mode
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @param[in] mode Synchronous mode. Possible options are:
|
|
* - \ref TPWM_CNTR_SYNC_DISABLE
|
|
* - \ref TPWM_CNTR_SYNC_START_BY_TIMER0
|
|
* - \ref TPWM_CNTR_SYNC_CLEAR_BY_TIMER0
|
|
* - \ref TPWM_CNTR_SYNC_START_BY_TIMER2
|
|
* - \ref TPWM_CNTR_SYNC_CLEAR_BY_TIMER2
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set counter synchronous mode of specified Timer PWM module.
|
|
* @note Only support all PWM counters are synchronous by TIMER0 PWM or TIMER0~1 PWM counter synchronous by TIMER0 PWM and
|
|
* TIMER2~3 PWM counter synchronous by TIMER2 PWM.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_COUNTER_SYNC_MODE(timer, mode) ((timer)->PWMSCTL = (mode))
|
|
|
|
/**
|
|
* @brief Trigger Counter Synchronous
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to trigger synchronous event by specified TIMER PWM.
|
|
* @note 1. This macro is only available for TIMER0 PWM and TIMER2 PWM. \n
|
|
* 2. STRGEN (PWMSTRG[0]) is write only and always read as 0.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_TRIGGER_COUNTER_SYNC(timer) ((timer)->PWMSTRG = TIMER_PWMSTRG_STRGEN_Msk)
|
|
|
|
/**
|
|
* @brief Enable Timer PWM Interrupt Wake-up Function
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER4 or TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable the timer pwm interrupt wake-up function.
|
|
* @note Only available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_PWMINT_WAKEUP(timer) ((timer)->PWMCTL |= TIMER_PWMCTL_WKEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable Timer PWM Interrupt Wake-up Function
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER4 or TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to disable the timer pwm interrupt wake-up function.
|
|
* @note Only available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_DISABLE_PWMINT_WAKEUP(timer) ((timer)->PWMCTL &= ~TIMER_PWMCTL_WKEN_Msk)
|
|
|
|
/**
|
|
* @brief Enable Zero Event Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable the zero event interrupt function.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_ZERO_INT(timer) ((timer)->PWMINTEN0 |= TIMER_PWMINTEN0_ZIEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable Zero Event Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to disable the zero event interrupt function.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_DISABLE_ZERO_INT(timer) ((timer)->PWMINTEN0 &= ~TIMER_PWMINTEN0_ZIEN_Msk)
|
|
|
|
/**
|
|
* @brief Get Zero Event Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @retval 0 Zero event interrupt did not occur
|
|
* @retval 1 Zero event interrupt occurred
|
|
*
|
|
* @details This macro indicates zero event occurred or not.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_ZERO_INT_FLAG(timer) (((timer)->PWMINTSTS0 & TIMER_PWMINTSTS0_ZIF_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear Zero Event Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro clears zero event interrupt flag.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_ZERO_INT_FLAG(timer) ((timer)->PWMINTSTS0 = TIMER_PWMINTSTS0_ZIF_Msk)
|
|
|
|
/**
|
|
* @brief Enable Period Event Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable the period event interrupt function.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_PERIOD_INT(timer) ((timer)->PWMINTEN0 |= TIMER_PWMINTEN0_PIEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable Period Event Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to disable the period event interrupt function.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_DISABLE_PERIOD_INT(timer) ((timer)->PWMINTEN0 &= ~TIMER_PWMINTEN0_PIEN_Msk)
|
|
|
|
/**
|
|
* @brief Get Period Event Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @retval 0 Period event interrupt did not occur
|
|
* @retval 1 Period event interrupt occurred
|
|
*
|
|
* @details This macro indicates period event occurred or not.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_PERIOD_INT_FLAG(timer) (((timer)->PWMINTSTS0 & TIMER_PWMINTSTS0_PIF_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear Period Event Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro clears period event interrupt flag.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_PERIOD_INT_FLAG(timer) ((timer)->PWMINTSTS0 = TIMER_PWMINTSTS0_PIF_Msk)
|
|
|
|
/**
|
|
* @brief Enable Compare Up Event Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable the compare up event interrupt function.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_CMP_UP_INT(timer) ((timer)->PWMINTEN0 |= TIMER_PWMINTEN0_CMPUIEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable Compare Up Event Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to disable the compare up event interrupt function.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_DISABLE_CMP_UP_INT(timer) ((timer)->PWMINTEN0 &= ~TIMER_PWMINTEN0_CMPUIEN_Msk)
|
|
|
|
/**
|
|
* @brief Get Compare Up Event Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @retval 0 Compare up event interrupt did not occur
|
|
* @retval 1 Compare up event interrupt occurred
|
|
*
|
|
* @details This macro indicates compare up event occurred or not.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_CMP_UP_INT_FLAG(timer) (((timer)->PWMINTSTS0 & TIMER_PWMINTSTS0_CMPUIF_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear Compare Up Event Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro clears compare up event interrupt flag.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_CMP_UP_INT_FLAG(timer) ((timer)->PWMINTSTS0 = TIMER_PWMINTSTS0_CMPUIF_Msk)
|
|
|
|
/**
|
|
* @brief Enable Compare Down Event Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to enable the compare down event interrupt function.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_ENABLE_CMP_DOWN_INT(timer) ((timer)->PWMINTEN0 |= TIMER_PWMINTEN0_CMPDIEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable Compare Down Event Interrupt
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to disable the compare down event interrupt function.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_DISABLE_CMP_DOWN_INT(timer) ((timer)->PWMINTEN0 &= ~TIMER_PWMINTEN0_CMPDIEN_Msk)
|
|
|
|
/**
|
|
* @brief Get Compare Down Event Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @retval 0 Compare down event interrupt did not occur
|
|
* @retval 1 Compare down event interrupt occurred
|
|
*
|
|
* @details This macro indicates compare down event occurred or not.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_CMP_DOWN_INT_FLAG(timer) (((timer)->PWMINTSTS0 & TIMER_PWMINTSTS0_CMPDIF_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear Compare Down Event Interrupt Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro clears compare down event interrupt flag.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_CMP_DOWN_INT_FLAG(timer) ((timer)->PWMINTSTS0 = TIMER_PWMINTSTS0_CMPDIF_Msk)
|
|
|
|
/**
|
|
* @brief Get Counter Reach Maximum Count Status
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @retval 0 Timer PWM counter never counts to maximum value
|
|
* @retval 1 Timer PWM counter counts to maximum value, 0xFFFF
|
|
*
|
|
* @details This macro indicates Timer PWM counter has count to 0xFFFF or not.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_REACH_MAX_CNT_STATUS(timer) (((timer)->PWMSTATUS & TIMER_PWMSTATUS_CNTMAXF_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear Counter Reach Maximum Count Status
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro clears reach maximum count status.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_REACH_MAX_CNT_STATUS(timer) ((timer)->PWMSTATUS = TIMER_PWMSTATUS_CNTMAXF_Msk)
|
|
|
|
/**
|
|
* @brief Get Trigger ADC Status
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @retval 0 Trigger ADC start conversion is not occur
|
|
* @retval 1 Specified counter compare event has trigger ADC start conversion
|
|
*
|
|
* @details This macro is used to indicate PWM counter compare event has triggered ADC start conversion.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_TRG_ADC_STATUS(timer) (((timer)->PWMSTATUS & TIMER_PWMSTATUS_EADCTRGF_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear Trigger ADC Status
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to clear PWM counter compare event trigger ADC status.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_TRG_ADC_STATUS(timer) ((timer)->PWMSTATUS = TIMER_PWMSTATUS_EADCTRGF_Msk)
|
|
|
|
/**
|
|
* @brief Get Trigger PDMA Status
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER4 ~ TIMER5.
|
|
*
|
|
* @retval 0 Trigger PDMA transfer data is not occur
|
|
* @retval 1 Specified counter compare event has trigger PDMA transfer data
|
|
*
|
|
* @details This macro is used to indicate PWM counter compare event has triggered PDMA start transfer data.
|
|
* @note Only available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_GET_TRG_PDMA_STATUS(timer) (((timer)->PWMSTATUS & TIMER_PWMSTATUS_PDMATRGF_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear Trigger PDMA Status
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER4 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to clear PWM counter compare event trigger PDMA status.
|
|
* @note Only available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_TRG_PDMA_STATUS(timer) ((timer)->PWMSTATUS = TIMER_PWMSTATUS_PDMATRGF_Msk)
|
|
|
|
/**
|
|
* @brief Get PWM Interrupt Wake-up Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER4 ~ TIMER5.
|
|
*
|
|
* @retval 0 PWM does not cause CPU wake-up
|
|
* @retval 1 PWM interrupt event cause CPU wake-up
|
|
*
|
|
* @details This function indicates PWM interrupt event has waked up system or not.
|
|
* @note Only available on TIMER4 and TIMER5.
|
|
*/
|
|
#define TPWM_GET_PWMINT_WAKEUP_STATUS(timer) (((timer)->PWMSTATUS & TIMER_PWMSTATUS_WKF_Msk)? 1 : 0)
|
|
|
|
/**
|
|
* @brief Clear PWM Interrupt Wake-up Flag
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER4 ~ TIMER5.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to clear PWM interrupt wakeup status.
|
|
* @note Only available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_CLEAR_PWMINT_WAKEUP_STATUS(timer) ((timer)->PWMSTATUS = TIMER_PWMSTATUS_WKF_Msk)
|
|
|
|
/**
|
|
* @brief Set Brake Event at Brake Pin High or Low-to-High
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set detect brake event when external brake pin at high level or transfer from low to high.
|
|
* @note The default brake pin detection is high level or from low to high.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_BRAKE_PIN_HIGH_DETECT(timer) ((timer)->PWMBNF &= ~TIMER_PWMBNF_BRKPINV_Msk)
|
|
|
|
/**
|
|
* @brief Set Brake Event at Brake Pin Low or High-to-Low
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set detect brake event when external brake pin at low level or transfer from high to low.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_BRAKE_PIN_LOW_DETECT(timer) ((timer)->PWMBNF |= TIMER_PWMBNF_BRKPINV_Msk)
|
|
|
|
/**
|
|
* @brief Set External Brake Pin Source
|
|
*
|
|
* @param[in] timer The pointer of the specified Timer module. It could be TIMER0, TIMER1, TIMER2, TIMER3.
|
|
* @param[in] pin The external brake pin source, could be one of following source
|
|
* - \ref TPWM_TM_BRAKE0
|
|
* - \ref TPWM_TM_BRAKE1
|
|
* - \ref TPWM_TM_BRAKE2
|
|
* - \ref TPWM_TM_BRAKE3
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This macro is used to set detect brake event when external brake pin at high level or transfer from low to high.
|
|
* @note NOT available on TIMER4 and TIMER5.
|
|
* \hideinitializer
|
|
*/
|
|
#define TPWM_SET_BRAKE_PIN_SOURCE(timer, pin) ((timer)->PWMBNF = ((timer)->PWMBNF & ~TIMER_PWMBNF_BKPINSRC_Msk) | ((pin)<<TIMER_PWMBNF_BKPINSRC_Pos))
|
|
|
|
|
|
void TPWM_SetCounterClockSource(TIMER_T *timer, uint32_t u32CntClkSrc);
|
|
uint32_t TPWM_ConfigOutputFreqAndDuty(TIMER_T *timer, uint32_t u32Frequency, uint32_t u32DutyCycle);
|
|
void TPWM_EnableDeadTime(TIMER_T *timer, uint32_t u32DTCount);
|
|
void TPWM_EnableDeadTimeWithPrescale(TIMER_T *timer, uint32_t u32DTCount);
|
|
void TPWM_DisableDeadTime(TIMER_T *timer);
|
|
void TPWM_EnableCounter(TIMER_T *timer);
|
|
void TPWM_DisableCounter(TIMER_T *timer);
|
|
void TPWM_EnableTriggerADC(TIMER_T *timer, uint32_t u32Condition);
|
|
void TPWM_DisableTriggerADC(TIMER_T *timer);
|
|
void TPWM_EnableTriggerPDMA(TIMER_T *timer, uint32_t u32Condition);
|
|
void TPWM_DisableTriggerPDMA(TIMER_T *timer);
|
|
void TPWM_EnableFaultBrake(TIMER_T *timer, uint32_t u32CH0Level, uint32_t u32CH1Level, uint32_t u32BrakeSource);
|
|
void TPWM_EnableFaultBrakeInt(TIMER_T *timer, uint32_t u32IntSource);
|
|
void TPWM_DisableFaultBrakeInt(TIMER_T *timer, uint32_t u32IntSource);
|
|
uint32_t TPWM_GetFaultBrakeIntFlag(TIMER_T *timer, uint32_t u32IntSource);
|
|
void TPWM_ClearFaultBrakeIntFlag(TIMER_T *timer, uint32_t u32IntSource);
|
|
void TPWM_SetLoadMode(TIMER_T *timer, uint32_t u32LoadMode);
|
|
void TPWM_EnableBrakePinDebounce(TIMER_T *timer, uint32_t u32BrakePinSrc, uint32_t u32DebounceCnt, uint32_t u32ClkSrcSel);
|
|
void TPWM_DisableBrakePinDebounce(TIMER_T *timer);
|
|
void TPWM_EnableBrakePinInverse(TIMER_T *timer);
|
|
void TPWM_DisableBrakePinInverse(TIMER_T *timer);
|
|
void TPWM_SetBrakePinSource(TIMER_T *timer, uint32_t u32BrakePinNum);
|
|
|
|
/**@}*/ /* end of group TIMER_PWM_EXPORTED_FUNCTIONS */
|
|
|
|
/**@}*/ /* end of group TIMER_PWM_Driver */
|
|
|
|
/**@}*/ /* end of group Standard_Driver */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __NU_TIMER_PWM_H__ */
|